How to configure SBWP inbox items to NWBC work inbox?

Hello Experts,
I got a requirement where i need to trigger workflow, i have done that but the work item is available in SBWP, but i need to show that workitem in NWBC inbox. How to achieve it??
Thanks & Regards,
Mohammed.

Hi Mohammed,
The below link may help you.
http://scn.sap.com/thread/3417006
Regards,
Murali Krishna.

Similar Messages

  • How to configure Sales order item text copy to Purchase requisition item

    Hi,
    How to configure sales order item text copy to Purchase requisition text then copy to PO item text.
    Regards
    Jack

    Hi Rajesha,
    Thanks for your reply, some of the items in sales order are procured externally by us and our customer maintains text related to price and specification in the item details of the sales order, MRP creates planned order for these materials and these planned orders are always converted in pur requisition, we want that text from the sales order item details should be copied in to the purchase requisitions converted from planned orders.
    is there any user exit which can be called at the time of saving a purchase req or user exit for converting planned order in to pur req.?
    if there is any such exit available, then I think I can read the pegged requirement of the planned order where sales order item will be found then read the text in the item then copy this text in pur req then save pur req may work.
    but this will be a bulky development, please let me know if we can shorten the development.
    Thanks again
    Anand

  • How to configure the delivery item text is required text

    Dear All,
            I have issues about delivery item text.  I would like to know how configure to delivery item text is required text (if not enter the text then cannot save delivery and show error message).
           In configuration about delivery text in text control. I configure the delivery item text is (text is obligatory) but the delivery item is only show at incompletion log but not requried field.
           In configuration about incompletion control for deliveries. No table and field is about delivery item text. I trial to enter PTEX(item texts) in field: Screen for creating missing data. The result can detect missing delivery item text but cannot specific delivery item text. If I enter other item text then the delivery can be saved. In additional, when I open screen delivery item text and not enter the delivery item text, the delivery can be saved.   These are incorrect. I would like to check the delivery item text is required text.
           Please suggest me how to solve this issue. Thank you very much. 
    Best Regards,
    Lek Lexus

    the

  • How to configure a Chart item in VC model

    Hi
    I am having problem in configuring a chart in VC model.
    In my VC model my query output or chart input is Cal Month/Year (Last 12 Months) and revenue. So there will always be 12 rows in output
    My requirement is to draw a Column chart for the above query output so that in X-Axis Cal Month/Year
    I made the following setting/config for chart item
    Chart Type: Column
    Data Series: Stacked
    Category Axis: Cal_year_month_ext_key
    Value Axis: Blank (Default Settings)
    Data Series: @revenue
    When I compiled, Deployed and executed the modeu2026output is
    In X axis all the 12 months are displayed but only the first row value is being displayed in the graph for all the months
    Please update me on how to configure a graph
    Thanks

    Hello,
    If you have only calmonth in the rows and revenue in your columns of your bi query
    pls try using a column chart with "clustered" data series rather than a stacked one
    since you have a single data series .
    Rgds

  • How to configure portal inbox workflow item?

    Dear All,
    I have a problem with my portal inbox. My workflow item in my development portal inbox is displaying differently from the production environment.
    For example when the MSS user click on leave approval item in his inbox to approve a leave, my development portal is displaying the approval screen in a better view but the production is just displaying the backend sap inbox screen.
    Anyone knows where I can configure this and is there any documentation for it. I suppose this is a UWL configuration right?
    Thanks,
    Regards,
    Bryan

    Hi Brian, that is the backend.. Transactions WFVISU seems to have some changes, what iview to display. This info is received when you register a system in the UWL Admin Console....
    You could download the Config XML from Dev and import it to QA with a different name and higher prio and see if seomthing changes...
    Regards,
    Kai

  • How to configure the maintenance item screen layout

    Hello experts,
    I need to configure Maintenance Item Screen layout .
    How do I do that? I checked in SPRO and could not find a place.
    Need to make some some fields as required.
    Thanks,
    Raneetha.

    There are some fields that can be made mandatory using Field Selection for Notification & Order.
    Some fields should be made mandatory using development (User Exit IPRM0004)

  • How to configure UWL inbox to SMTP

    Dear Experts,
    I have configured SMTP server in my Portal and it is working fine. I could trigger mails from my Portal.
    Now how do i configure UWL with SMTP so that any Task assigned or any Tracking update mail should trigger to Users.
    Regards,
    Mahesh

    Hi,
    please check out the wiki first:
    http://wiki.sdn.sap.com/wiki/display/BPX/UWL%20FAQ
    as well as the documentation provided by help.sap.com
    There you can find lots of information about it.
    Regards
    Anja

  • How to configure agent Inbox

    Hi experts,
    I need the steps to configure the agent inbox in CRM 5.0 winclient.
    Best Regards,
    Caíque Escaler

    Hi,
      Go thru this link.
    http://help.sap.com/saphelp_crm50/helpdata/en/43/cfae5e7aab0236e10000000a11466f/frameset.htm
    Regards
    Srinu

  • How does sharepoint designer create item in list work ?.

    I'm using sharepoint 365, and the free sharepoint designer.
    I'm trying to make something so that if List A gets an update other lists get new records to.
    There is a sharepoint-designer action that lets one create a an item in another list.
    And i have tested it a lot but haven't got any of my tests to work, been trying for a week now.
    I'm not sure as how it is exactly named in English, since our sharepoint is al dutch  :(
    I think in English  it looks like:
    Create item in Yourlistname  (save result in variable
    Succes)
    When clicking on yourlistname, you need the all valeus of all required items in the list.
    Now asume such worklow rule is made to start after an Entry is made in List A, And we want to update List B
    Here i start i think my problems
    So you select List B as your listname, but then...
    How does one refer, to a required link title from List A?.  use current list item ?
    How to link to a 4th table entry of List C as value to make in List B
    If List A has a value that is clickable-link how to link that to Value B
    If someone knows of problems with this, permissions things, or knows a youtube explaining it, or can explain it himself. It would be of great help to me.
    Upon futher investigation, i got into problems where the workflow has to fill in an item
    Into a column type that is a lookup table (another list), if work with string columns it works, but I need the current "name" as a lookup link connected into List B

    Hi PGT,
    I have seen a similar thread from you. The solution is that you need to work with Item ID's when you define the workflow to work with Lookup columns links. only at creation time you need to enter what field you like to include in your list. Based upon ID
    it will then show the values. The thread is:
    https://social.msdn.microsoft.com/Forums/office/en-US/e342e18a-3f68-4b49-9d80-41f11b76cb4e/how-does-sharepoint-designer-create-list-item-work-?forum=sharepointcustomization
    I will mark this reply as answer to close this case. If you have any question about this issue, please feel free to reply.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • How to configure IPMP and PFIL/IPF to work together on Solaris 9?

    Hi folks,
    See the subject regarding my question.
    Is there anyone who has ever accomplished this on Solaris 9? If so, what version of IPMP and PFIL/IPF did you use, and what steps did you take to make it work?
    I just can't get it to work, I have tried all tips and tricks I could find on the web so far, most of them are regarding Solaris 10.
    Many thanks in advance!
    RVDL
    PS: Duke Stars available.

    Not sure what you mean with IPMP, but if you mean active-active loadsharing among more than one interface in the same ifconfig group and subnet monitored by mpathd,
    I'm afraid you can't do that with ipf (AFAIK), as the states (from "keep state") are stored per interface while packets may come in and go out unpredictedly and asymetricly on any relevant interface. You must configure active-standby in /etc/hostname.* (or configure 100% static (stateless) rules, i.e. no "keep state" (or pass in&out all TCP with the established flag set)).
    I have used active-standby a lot on T1, E450, V480 etc. I compiled ip_filter from Darren's source 3.4 and 4.1
    Note: V210/240 and others with the bge-driver may cause problems as the bge-driver is (was) broken, in the way that the stand-by interface isn't 100% stanby (only 99% standby).
    Last I checked with snoop it showed sporadic ssh-packets on the stanby-interface making the session hang for a while or timeout. I had to "ifconfig down" the standby interfaces on all V210/240s thus breaking automatic failover.
    Active sessions will hang and timeout on failover, but that is ususally only a problem for long-lived sessions like ssh, and no problem for short lived/retry/reconnecting protocol-sessions like HTTP, DNS etc.

  • How to configure item categories in delivery

    Dear All;
    I am trying to punch item categories TAN and TAL in Standard sales order together, it has been successfully done but Li am not able to deliver them together, can any body send me a link or some documents on how to configure these two item categories together in sales document items and in deliveries . Item category TAL is returnable packaging material and is not chargeable. I don't have access to OSS notes, so SAP building blocks will be helpfull. the same problem i am facing with free of charge item category TAS
    I have the following settings
    or LEIH TAN = TAL +TAN
    where TAN is higher category
    orLEIHTAL=TAL+TAN
    OrLEIH=TAlTAN
    what should be the assignemnet in delivery type LF as the main problem is with delivery.
    The assignments are
    LF+ LEIH=TAL
    LFLEIHTAL=TAL
    LFLEIHTAN=TAL
    where  Highet item category is TAL

    Hi Pr Singh,
    Check the settings in  T.Code  <b>0184</b>.
    Check if it works if we assign
    LF + LEIH + PACK+   + =  TAL.           
    Reply if it works.
    Thanks
    Mohan

  • Item category usage - how to configure

    My client requirements are
    Need a new Usage code (item category usage)
    description =  "Included with System "
    The users will use this to add items to the sales order as Free Goods but the revenue for the items is already embedded in the main item 
    How to configure this?
    Also are there any additional updates required to allow the usage code to be used ?
    Thank you!

    Hi
    Usage indicator is something else. Just go through F1 help and see for what purpose we can use this field. What you are looking for is free goods configuration. This has been discussed so many times. Search with thext free goods and see if you find something. If you have some other requirement then come again with more explanation.
    Thank$

  • How to configure Item Category in Purchase Order document

    Hi
    Can someone tell me how to configure the Item Category in Purchase ORder document?  This field is displayed next to Account Assignment in PO screen.
    Thanks,
    Lin-Lin

    I think your issue is screen layout of the PO
    please go to
    SPRO-MM-Purchasing-Purchase order-Define Screen Layout at Document Level
    here you can select the ME21N and double click on it
    on field selection of basic data you can make item category is optional than it will be avialable
    if still you find the problesm than check your field selection of your document type and change that field selection as above mentioned.

  • How to configure for the price master of the configurable item

    in my client we have the configurable items like car doors with different colour as per the color
    the price is changing
    so how to configure this masterdata for pricing for all the material

    Hi
    This kindly of process is done at Variant configuration. so the pricing will define in condition type VA00. and the variant process as follows:
    Eg: Ford car.If a sale order is raised for fiesta lxi model the system should choose red colour & for vxi blue colour respectively.
    ie you need to define the characteristic and assign the values .
    This characteristic need to assigned to class.
    class need to be assigned to material master
    1. T.code : CT04(characteristic) FORD_MODEL, Choose single value & entry required tab & give the input as 01 - fiesta_lxi & 02 - fiesta_vxi.( characteristic values)
    2.Tcode: CT04, FORD_BODY( another characteristic)
    Choose single value , don't click entry required.
    01 - Red( characteristic values)
    02- Blue
    3. Create class T.code : CL02
    fiesta_class
    type : 300
    4. OBJECT DEPENDENCY:
    T.CODE : CT04
    FORD_MODEL
    CLICK VALUES TAB,
    IN FIESTA_LXI CLICK THE 'O' meant for Obj dependency, action & extra.
    Edit the dependecy,
    010 $Self.ford_body = '01'. & save
    Repeat the same for FIEST_VXI & instead of '01' give '02' for blue colour.
    , then create a ROH as ford_body. & a KMAT material for the car. .
    Then create a Super BOM with usage 3 & give component as ford_body
    Then use T.code cu41 (Create config profile)
    enter a profile name & class 300 & choose class assignment, choose fiest_class ,
    Use T.code cu50 to check the values.
    Then create a sale order.
    Reward if it helps
    Regards
    Prasanna R

  • Hi all anybody    can contribute on how  to configure Freegood for  3 items

    HI all,
    Can anybody  share  how to configure   1 free good for 3 items.Ex: When we purchase A,B&C items system should give D as  a  free good.
    Thanks in advance,
    Ram

    hi
    there are constraints for free godds scenario
    1> Free goods are currently not supported with material structures like product selection, BOM, variants with Bom selection.
    2>only supported on a 1:1 basis
    3>only supported with sales orders with document category "c" not for quotation etc
    4>are not currently supported for deliveries without reference to sales orders
    5>are not supported for make to order production, third party scenario,and scheduling agreements
    regards

Maybe you are looking for