How to configure selection screen in report

Hi all,
could anyone help me in configuring the selection screen in the report.
Advance Thanks
Regards
Guhapriyan

Here is some basic code to generate a selection screen.
tables: afko.
selection-screen begin of block b1 with frame title text-001 .
select-options: s_gltrp for afko-gltrp.
parameters: p_gltrp type afko-gltrp.
selection-screen begin of line.
selection-screen comment (25) text-005.
selection-screen position 33.
parameters: p_pln as checkbox default ' '.
selection-screen end of line.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-004 .
selection-screen begin of line.
selection-screen comment (20) text-002.
selection-screen position 33.
parameters: p_det as checkbox default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment (20) text-003.
selection-screen position 33.
parameters: p_sum as checkbox.
selection-screen end of line.
selection-screen end of block b2.
Regards,
Rich Heilman

Similar Messages

How to create multiple selection screens in reports

How to create multiple selection screens in reports
Thanks,
Sridhar

Ex: hope you will find an idea from the below example :
SELECTION-SCREEN BEGIN OF BLOCK SEL1 WITH FRAME TITLE TIT1.
PARAMETERS: CITYFR LIKE SPFLI-CITYFORM,
            CITYTO LIKE SPFLI-CITYFORM.
SELECTION-SCREEN end OF BLOCK SEL1
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN INCLUDE BLOCKS SEL1.
SELECTION-SCREEN BEGIN OF BLOCK SEL2 WITH FRAME TITLE TIT2 .
PARAMETERS: AIRPFFR LIKE SPFLI-AIRPFROM,
            AIRPTO LIKE SPFLI-AIRPTO.
SELECTION-SCREEN END OF BLOCK SEL2
SELECTION-SCREEN END OF SCREEN 5000.
INITIALIZATION.
TIT1 = 'ITIES'.
aT SELECTION-SCREEN.
CASE SY-DYNNR.
WHEN '0500'.
   MESSAGE W159(at) WITH 'SCREEN 500'.
WHEN '1000'.
   MESSAGE W159(at) WITH 'SCREEN 1000'.
ENDCASE.
START-OF-SELECTION.
TIT1 = 'CITIES FOR AIRPORTS'.
TIT2 = 'AIRPORTS'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
TIT1 = 'CITIES AGAIN'.
CALL SELECTION-SCREEN 1000 STARTING AT 10 10.

How we can assign the customised selection screen to report category

hai
gurus
how we can assign the customised selection screen to report category

Hi Naresh,
You can do like this.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME.
SELECT-OPTIONS: S_FKART FOR VBRK-FKART.
SELECT-OPTIONS: S_FKDAT FOR VBRK-FKDAT OBLIGATORY.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
SELECT-OPTIONS: S_AUART FOR VBAK-AUART.
SELECTION-SCREEN END OF BLOCK SELECTION.
SELECTION-SCREEN END OF BLOCK B1.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

Creating Selection screen in Report Painter

Good day everyone,
Does anyone know how I could create a selection screen in Report Writer? Thanks!
>Christian<

Hi,
Simple Parameters or Selec-options statements will suffice.
Eg : Parameters : p_matnr type mara-matnr.
select-options : s_matnr for mara-matnr.
In selection screen, you may have selec-options, parameters, check boxes, radio buttons etc.
Regards,
Sujatha.

Adding gsber in selection screen of report painter

To gurus,
I have a small requirement, I have to get business area (GSBER) in selection screen of report.
I have developed the report using report painter FGI1 --FAGLFLEXT which is having gsber field.
In selection screen it self i want this GSBER FIELD .How to achieve it.
kindly guide me.
regards,
padmaja.

Hi
What I understand from your question is you want bussiness area value on selection screen you can achive this by just using the by export/import parameter or by get/set parameter id.
Please elaborate what exactly you want.
Regards
Sagar.

AT SELECTION-SCREEN stops report

Hello,
I run a report using the AT SELECTION-SCREEN stmt.
Below AT SELECTION-SCREEN is an IF ... ELSE block. Within that block the report checks, whether the user input (made in a SELECT-OPTIONS) complies some requirements.
I check for example, if that what the user types in matches a defined string...
But if i use an AT SELECTION-SCREEN, the report does not continue after execution after that!
It returns to the selction screen...
How can I achieve, that the report continues with execution...?
Thx,
holger

Hi Holger,
1. This is the default behaviour.
2. For report purpose execution,
   the event is
   START-OF-SELECTION ( and not at selection-screen)
3. However u CAN ACHIEVE this by :
   after all validations , use the syntax
   LEAVE TO LIST-PROCESSING.
4. I tried the same at my end,
   its working fine.
5. However, if u use step 3,
   there will be a problem :
   after the execution of report,
it wil get HANG. ie. it won't then
get back using the toolbar buttons.
U may try it for yourself.
6. Bottom line is:
   use
START-OF-SELECTION (FOR FINAL EXECUTION OF THE REPORT)
Regards,
Amit M.
Message was edited by: Amit Mittal

How to capture selection-screen values

Hi,
How to capture selection-screen values when user pressing F3 or Back button after the display of report.
Regards,
Bujji.

Hi Bujji,
select-option are actually ranges or more general internal tables with the structure:
SIGN:    'I'nclusive or 'E'xclusive
OPTION: 'EQ', 'BT', 'NE', 'GE', 'CP', ....
LOW:     low value of type of the curresponding "FOR table-field"
HIGH:     high value of type of the curresponding "FOR table-field"
You may just code:
TABLES: mara.
SELECT-OPTIONS s_matnr FOR mara-matnr.
LOOP AT s_matnr.
WRITE: / s_matnr-sign,
           s_matnr-option,
           s_matnr-low,
           s_matnr-high.
ENDLOOP.
If you find my answer useful, please don't forget the reward.
Regards,
Juergen

How to avoid selection-screen?

Hi,
i have this short report:
TABLES: MARA.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
AT SELECTION-SCREEN.
IF SY-BATCH = 'X'.
* how to avoid selection screen
ENDIF.
START-OF-SELECTION.
SELECT * FROM MARA WHERE MATNR IN S_MATNR.
    WRITE: / MARA-MATNR.
ENDSELECT.
END-OF-SELECTION.
in batch i don't want the selection-screen. Is it possible? How can i do this?
Thanks.
regards, Dieter

Dieter Gröhn wrote:
> Hi,
>
> i have this short report:
>
>
> TABLES: MARA.
> SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
> *
> AT SELECTION-SCREEN.
>   IF SY-BATCH = 'X'.
> * how to avoid selection screen
>   ENDIF.
> *
> ************************************************************************
> START-OF-SELECTION.
> *
>   SELECT * FROM MARA WHERE MATNR IN S_MATNR.
>     WRITE: / MARA-MATNR.
>   ENDSELECT.
> *
> END-OF-SELECTION.
>
>
> in batch i don't want the selection-screen. Is it possible? How can i do this?
>
> Thanks.
>
> regards, Dieter
Please check the value of the variable sy-binpt, I believe the value of the variable sy-binpt will be set to 'X' if the program is called from a bath input, hope this helps.

Modification on selection screen of report

Hello guys,
I have a requirement where in i need to modify the initial selection screen as per clients requirement. The scenario is as follows:
Suppose 'EMPLOYEE' and 'PORTFOLIO' are two of the fields of a cube on which the report will be run. Now suppose there are three employees as A, B and C and A handles portfolios X & Y, B handles portfolios W & Y while C handles portfolios X & Z.
The initial selection screen of report will have two selection fields first as the employee and second as the portfolio.
When we do F4 at employee it will display A, B and C. Now the requirement is if we F4 at portfolio it should display only the relevant one for that employee.
For example: if i give employee as A and when i do F4 at portfolio screen it should give me only X and Y and not all the portfolios viz. W, X, Y & Z
Is there a way to achieve the above scenario????

Hi Chakradhar,
Refer this code :
SELECTION-SCREEN BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-456.
PARAMETERS PO RADIOBUTTON GROUP RADI USER-COMMAND R.
SELECTION-SCREEN END OF BLOCK BL2.
AT SELECTION-SCREEN OUTPUT.
CALL SCREEN 100.
when user will click on this radio button , a pop up screen will appear dynamically.
Reward points if helpful.
Regards,
Hemant

HOW TO USE SELECTION SCREEN

HOW TO USE SELECTION SCREEN
I WANT TO INSERT PURCHASE DOCUMENT NUMBER
AND WANT TO SEE ALL INFORMATION FOR THAT PURCHASE DOCUMNET NUMBER.
THANKS IN ADVANCED.

The main use of the selection-screen is to select screen in the back ground
ex :
TABNAME
IN THE ABOVE FIGURE TABNAME IS THE FIELD AND THE BACK END IS CREATED SCREEN IN THE BACK END
THIS SCREEN CREATION WE CAN USED THE SCREEN SELECTION

How to pass selection screen parameters in text elements?

how to pass selection screen parameters in text elements?

don't you mean he other way around. Assign text-elements (selection texts) to select options?
This you do in the menu where you can find text-elements, selection texts.
menu Goto->text elements->selection texts.
Edited by: Micky Oestreich on May 10, 2008 2:45 PM

WAD template with BSP Application - how to read selection screen values

Hello,
I've created Web template with Web Application Designer (WAD).
I would like to extend that page with BSP Application...
Purpuse of this application is to read some information from tables
on BW transaction server and display them within Web page.
Question: How to read selection screen values from a Web template ?
Thanks for any help,
Pawel Borowiec

Hi,
The selection screen parameters will be on an inputField, so try and get the is of the inputfield generated by doing View source...
And once you get the inputfield Id, you can read the value in the InputField(InF) by
using the following code...!
data : if_value type ref to cl_htmlb_inputfield.
data : variable type string.
if_value ?= cl_htmlb_manager=>get_data( request = request
                                            name    = 'inputField'
                                            id      = 'InF_ID_here'
       if if_value->value is not initial.
         variable = if_value->value.
       endif.
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

How to cal selection screen in module pool

Hi abapers,
I have to use selection screen in module pool programme..How to call selection screen in module pool.
Regards,
ramya

YOU HAVE TO DEFINE YOUR SELECTION SCREEN LIKE THIS
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                      NO INTERVALS.
    SELECT-OPTIONS SEL1 FOR SY-SUBRC.
    PARAMETERS     PAR1 LIKE SPFLI-CARRID.
    SELECTION-SCREEN COMMENT /10(20) TEXT-COM.
SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN END OF SCREEN 123.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF SCREEN 99.
SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
                   USER-COMMAND US01.
SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
PARAMETERS     PAR2 TYPE I.
SELECTION-SCREEN END OF SCREEN 99.
THEN YOU HAVE TO CALL THAT
CALL SELECTION-SCREEN scr.
AFTER THAT YOU CAN CALL THE ANOTHER SCREEN..
CALL SCREEN..
REGARDS
SHIBA DUTTA

FM to display Selection screen on report output??

Hi Experts,
Is there an FM to display Selection screen on report output.
Thanks In Advance.

Hi Ashwin,
Refer to below link
http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm
or
The easiest way is to define your selection screen in the TOP include of your module pool.
Then call the selection screen.
Selection Screen
selection-screen begin of screen 1010 as window title text-001.
selection-screen begin of block b1 with frame title text-002.
parameters: p_vornr type resb-vornr,
p_refno(20) type c,
p_plnid type zplcfg-plnid as listbox visible length 20,
p_sorts type c as listbox visible length 20.
selection-screen begin of line.
selection-screen comment (20) text-004.
selection-screen position 33.
parameters: p_order as checkbox default 'X'.
selection-screen end of line.
selection-screen end of block b1.
selection-screen end of screen 1010.
Now call the selection screen.
call selection-screen 1010.
if sy-subrc = 0.
perform get_production_orders.
perform process_orders.
endif.
Thanks!!

How to Configure PeopleTools 8.49 Report Manager ?

Folks,
Hello. I am using PeopleTools 8.49. I run a process in Process Scheduler successfully but cannot see its output report. It seems that there is a procedure to configure Report Manager at first so that all reports are stored in Report Manager after run processes in Process Scheduler.
Do any folks understand how to configure PeopleTools 8.49 Report Manager properly ?
Thanks.

Report Manager is a utility in PeopleSoft to view Reports from a different place than Process Monitor. Navigation: Reporting Tools -> Report Manager. It has fours pages: List, Explorer, Administration and Archives.
PSDSTSRV generates a message after a process gets posted in process monitor in order to display reports in Report Manager - List and Explorer page. Hence Integration Broker setup needs to be done and PUB/SUB App Server Processes required to be up and running. Here are the configuration steps:
- Navigate to PeopleTools -> Integration Broker -> Integration Setup -> Service Operations
- IB needs to be configured for four services
•PSRF_FOLDER_CREATE
•PSRF_REPORT_CREATE
•PSRF_REPORT_DATE_CHANGE
•PSRF_REPORT_DELETE
- Open Service Operation PSRF_FOLDER_CREATE and make it active in General tab.
- In Handlers tab add a handler and make it Active. Handler name might differ from the screenshots's name but the Application Class definitons must match. Package name is same as the service operation name.
- In Routings tab, add a routing definition and make it active. Not sure, but I think only one routing definition must be active at a time... Sender and Receiver node are the local nodes - in my case it is PSFT_HR... to confirm your local node, go to PeopleTools -> Integration Broker -> Integration Setup -> Nodes and search for node...
- Repeat the above activity for rest of the services PSRF_REPORT_CREATE, PSRF_REPORT_DATE_CHANGE, and PSRF_REPORT_DELETE also. Configuration is almost similar e.g., make the service active in general tab, Add a new handler and make it active (class id would differ for all) in handler tab, Add a new Routing Name and make it active in Routings tab.
You might want to navigate PeopleTools -> Integration Broker -> Integration Setup -> Routings / Services to check your routings or Services definition and status.
Here completes IB configuration from PIA. A prior understanding of IB setup would help troubleshooting or any kind of configuraiton understanding in case something looks missing here.
Next step is to start the PUB/SUB App Server Processes... Once these server processes are up and running, reports would get displayed in Report manager - List/Explorer page.
Of course, basic IB setup is pre-requisite for the above activity to work. This includes Gateway configuration (PeopleTools -> Integration Broker -> Configuration -> Gateway), Gateway Setup Properties (PeopleTools -> Integration Broker -> Configuration -> Gateway -> Gateway Setup Properties), Quick Configuration (PeopleTools -> Integration Broker -> Configuration -> Quick Configuration) where you need to Gateway URLs and IB domains are active.
let me know i f u have any questions or concerns... they are all delivered nodes by peoplesoft.
Thanks!!....

How to configure selection screen in report

Similar Messages

Maybe you are looking for