How to Configure PeopleTools 8.49 Report Manager ?

Folks,
Hello. I am using PeopleTools 8.49. I run a process in Process Scheduler successfully but cannot see its output report. It seems that there is a procedure to configure Report Manager at first so that all reports are stored in Report Manager after run processes in Process Scheduler.
Do any folks understand how to configure PeopleTools 8.49 Report Manager properly ?
Thanks.

Report Manager is a utility in PeopleSoft to view Reports from a different place than Process Monitor. Navigation: Reporting Tools -> Report Manager. It has fours pages: List, Explorer, Administration and Archives.
PSDSTSRV generates a message after a process gets posted in process monitor in order to display reports in Report Manager - List and Explorer page. Hence Integration Broker setup needs to be done and PUB/SUB App Server Processes required to be up and running. Here are the configuration steps:
- Navigate to PeopleTools -> Integration Broker -> Integration Setup -> Service Operations
- IB needs to be configured for four services
•PSRF_FOLDER_CREATE
•PSRF_REPORT_CREATE
•PSRF_REPORT_DATE_CHANGE
•PSRF_REPORT_DELETE
- Open Service Operation PSRF_FOLDER_CREATE and make it active in General tab.
- In Handlers tab add a handler and make it Active. Handler name might differ from the screenshots's name but the Application Class definitons must match. Package name is same as the service operation name.
- In Routings tab, add a routing definition and make it active. Not sure, but I think only one routing definition must be active at a time... Sender and Receiver node are the local nodes - in my case it is PSFT_HR... to confirm your local node, go to PeopleTools -> Integration Broker -> Integration Setup -> Nodes and search for node...
- Repeat the above activity for rest of the services PSRF_REPORT_CREATE, PSRF_REPORT_DATE_CHANGE, and PSRF_REPORT_DELETE also. Configuration is almost similar e.g., make the service active in general tab, Add a new handler and make it active (class id would differ for all) in handler tab, Add a new Routing Name and make it active in Routings tab.
You might want to navigate PeopleTools -> Integration Broker -> Integration Setup -> Routings / Services to check your routings or Services definition and status.
Here completes IB configuration from PIA. A prior understanding of IB setup would help troubleshooting or any kind of configuraiton understanding in case something looks missing here.
Next step is to start the PUB/SUB App Server Processes... Once these server processes are up and running, reports would get displayed in Report manager - List/Explorer page.
Of course, basic IB setup is pre-requisite for the above activity to work. This includes Gateway configuration (PeopleTools -> Integration Broker -> Configuration -> Gateway), Gateway Setup Properties (PeopleTools -> Integration Broker -> Configuration -> Gateway -> Gateway Setup Properties), Quick Configuration (PeopleTools -> Integration Broker -> Configuration -> Quick Configuration) where you need to Gateway URLs and IB domains are active.
let me know i f u have any questions or concerns... they are all delivered nodes by peoplesoft.
Thanks!!....

Similar Messages

How to configuration Maintenance Optimizer in Solution Manager 4.0?

Hi All,
Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
If any one having the document for same then please give me.
My mail id is : - <email address removed by moderator>
Thanks a lot,
Harshal

Hello Harshal,
Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
Another document is attached in Note 990534.
If you have further issues, Note 1024932 might be a good starting point.
Best regards,
Victor

How to configure satellite system in Solution manager

Hi,
Please advise me how to configure satellite system in solution manager.
Regards,
Asif

Hi,
can you check this installation guides
[ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
Regards,
Muralidhar

How to configure maintanace optimizer in solution manager

Hi,
How to configure maintanace optimizer in solution manager.
Regards,
Asif

Hi,
Check this link... it has complete step by step configuration of Maintenance Optimizer...
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/90454eea-3564-2a10-d0b9-c84d468365ab
http://help.sap.com/saphelp_smehp1/helpdata/en/46/418970cdb45fabe10000000a1553f7/frameset.htm
https://websmp210.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp210.sap-ag.de/~sapidb/011000358700000086862008E.sim
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1787522650DB00553277662805589317End?blog=/pub/wlg/8217
Also, http://service.sap.com/rkt-Solman --> Technology Consultant & System Administrator -> Technical configuration ->configuaration of Basic settings in solman, Mopz simple usage and normal usage
Thnx,
Waseem.

How to disable Print button in Report Manager in SSRS 2008

I have a report with long list of columns. Currently we are supporting only excel export and we do not want user to print reports. I know we can disable export options by editing Render extensions in rsreportserver.config. Kindly suggest me how I can stop
user from printing reports.
Thanks.

Please refer the link below:
http://msdn.microsoft.com/en-us/library/ms155874.aspx
"Report server administrators have the option of disabling the print feature by setting the report server system property
EnableClientPrinting to false. This will disable client-side printing for all reports managed by that server. By default,
EnableClientPrinting is set to true. You can disable client-side printing in the following ways:
Select Enable download for the ActiveX client print control on the Server Properties page in Management Studio. To open Server Properties pages, connect to a report server instance in Management Studio, right-click on the report server node,
and select Properties.
Write script or code that sets the report server system property EnableClientPrinting to
false."
Thanks, Michael Mei
Is there a way to enable or disable printing and export facility in the client based on report server roles. In our case some group of users only needs read access and so we want to prohibit export and print facility.
bhav27

How to configure quality process with batch management.

Dear Friends,
we have a scenario,our client receive goods with 101movement type into quality inspection stock.
once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
failed in quality test will be rejected.please give me suggestion how to map the scenario.while i am testing
the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
configure the process.we are not using QM module.
please suggest me.
Regards,
Varun

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

After configuring SSL, cannot run Report Manager but ReportServer works fine

I'm using SSRS 2014 as part of SQL Server 2014 Express. I've configured both the Web Service URL and the Report Manager URL to use a Certificate and only allow port 443 traffic. I did this by removing the port 80 identity and adding an SSL Identity.
All is working well for https://myserver.com/ReportServer. But when I try and access report manager, I get the following error when running remote:
The underlying connection was closed: Could not
establish trust relationship for the SSL/TLS secure channel.
When running directly on the server, the server, it just rejects my passwords and asks for it again.
If I remove the SSL Indentity and add back in port 80, it works fine over https.
Any ideas of what might be causing this problem?
Thanks,
Glenn
Please mark this post as Answered if it solved your problem, otherwise you can click Vote if it helped you out. -Glenn Thimmes

Hi Glenn,
Per my understanding that you have added an SSL Identity and you got some errors "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel." when you logging remotely to the report manager,
but which work fine when login report server, and it also asked for credential when you login report manager locally, right?
The issue can be caused by many factors. Please check below points one by one to help you clarify:
In rsreportserver.config file(Path like this:C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer), ensure that SecureConnectionLevel is set to the value 2 or 3. If disable the SSL value is set to 0. Corrected
line in your rsreportserver.confiog file should look like:
<Add Key="SecureConnectionLevel" Value="3"/>
In rsreportserver.config, add the correct value to the <URLRoot> element. the ReportServerUrl value must be the name of the server that is registered for that certificate. with a hostname that is valid for your certificate. For example, if the
certificate is registered to https://adventure-works.com.onlinesales, the report server URL would be
https://adventure-works.com.onlinesales/reportserver.
<UrlRoot>
https://adventure-works.com.onlinesales/reportserver.
</UrlRoot>
Ensure that your certificate exists in Trusted Root Certification Authorities in certmgr for the local machine.
http://www.c-sharpcorner.com/uploadfile/anavijai/could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
This is very important. In rsreportserver.config file, add the same value to the <ReportServerUrl> element the same as that you added in step 2.
<ReportServerUrl>
https://adventure-works.com.onlinesales/reportserver.
</ReportServerUrl>
Then restart your report server (stop & then start in Report Server Configuration Manager).
Article related to this issue also contain the troubleshooting for your reference:
http://msdn.microsoft.com/en-us/library/ms345223(v=sql.100).aspx
Similar threads for your reference:
Could not establish trust relationship for the SSL/TLS secure
channel
SSRS 2008- Underlying connection
was closed – could not establish trust relationship for SSL/TLS
If your problem still exists, please try to provide us snapshopt about the setting for the SSL Identity and also the Report Manager URL,etc.
Regards
Vicky Liu

How To Configure My Forms And Reports In IAS10g?

Hi Gurus,
I installed database 10g,IAS10g,forms and reports10g(J2EE/OC4J
Environment) separately.
now i want to configure my forms and reports in IAS 10g.i can run the form from
formbuilder after started the oc4j.but i am not able to run in ias .
anybody know the link" how to configure forms and reports in ias " just
forward to me.
Regards
Gopinath M

Hi,
you should be able to do the same because Forms and Reports are automatically set up. You need to customize the tnsnames.ora of te applicationServer Network/Admin directoy to point to the database you created. Then you configure the Forms application in the formsweb.cfg file of the Forms/server directory
The access is through the HTTP port of the application server
Frank

Questions in Ad Hoc Query & How to Configure the EEO standard reports

Hi all,
I have a question in Ad hoc query report in HR.
<b>How to:</b> Get a list of the total number of employees included in a particular report at the end of the report. Ex: If i create and run a report for salaried employees, sorted out by company codes, how can i get a sub-total and total no. of employees listed in the report.
I tried Ranked format, but when you print the report it doesn't retain the report name on the top.
-->I have a question regarding the Standard reports for EEO and AAP
<b> How do I</b>
1. Start configuring these report
2. What are the things i should have before configuring it in IMG
If anyone can provide me with some documentation regarding the EEO and AAP report configuration that would be great.
Thanks in advance.....
Harish

This can be done using the security for the Infoprovider, provide the users access to create queries only for that Infoprovider.

How to configure notification emails for reports output or alerts for all users in r12

Hi,
I need to configure notification emails. I have provided settings in OAM-> Workflow and SMTP IP address in settings and only Outbound. I am able to test for my user ID.
I want to know how to redirect emails or alerts for users like when a user runs a report he should get notification email in his outlook about the report output and details. In settings it only points for one replyto field. How do I mention all user ID's?
Regards,
Mohammed

Hi Mohammed,
You may check on XML bursting for XML based reports.
In addition, also see links:
http://oracle.anilpassi.com/email-output-of-concurrent-program-request.html
Anil: Oracle Apps Concurrent program Output as Email
Oracle ERP World: Email the output of a concurrent program as Attachment
Also see:
How to Redirect Output from Printer to Mail Message after Running Report (Doc ID 1036586.6)
Thanks &
Best Regards,

How to configure a new status report in cProjects?

First of all, the standard status report PDF is not rendering at all when we generate the status report - we CAN send it with the appropriate data, though, so we know that the program is gathering the data. All of our other custom interactive PDFs are working fine.
Our issue is that we'd like to create a new custom status report but can't figure out how to do it.
We've done the following:
1) create a read only form (zstat_rpt)
2) in SPRO, for our capital and expense project types, we've entered
ZSTAT_RPT in the PDF Print Form sub-folder. Marked it as ACTIVE and
checked the Status Rpt checkbox.
3) Unchecked the DPR_STATUS_REPORT_AIF Status Rpt and Active checkboxes
4) Under Badi: PDF-Based Forms in SPRO, we created a new Enhancement
Implementation (zrp_eimp_stat). It uses BAdi Implementation DPR_STATUSREPORT_AIF
and the description shows as Izrp_eimp_statmplementation: BAdI: PDF-Based Forms
5) In SE19, I go to the badi implementation, into method GET_FORM_NAME and changed
the Returning parameter RV_FORM_NAME to ZSTAT_RPT (my pdf form).
Now, when i go to generate the status report, I get a message "No templates for status reports have been entered for the project type" - I know my project type is capital.
any help on this? any steps I'm missing?

Hi,
I dont think that we can insert new records in WE47, but we can develop the logic in the idoc population program to add status to the idoc.
Please let me know if you need the program code.
Regards,
donepudi

How to configure selection screen in report

Hi all,
could anyone help me in configuring the selection screen in the report.
Advance Thanks
Regards
Guhapriyan

Here is some basic code to generate a selection screen.
tables: afko.
selection-screen begin of block b1 with frame title text-001 .
select-options: s_gltrp for afko-gltrp.
parameters: p_gltrp type afko-gltrp.
selection-screen begin of line.
selection-screen comment (25) text-005.
selection-screen position 33.
parameters: p_pln as checkbox default ' '.
selection-screen end of line.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-004 .
selection-screen begin of line.
selection-screen comment (20) text-002.
selection-screen position 33.
parameters: p_det as checkbox default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment (20) text-003.
selection-screen position 33.
parameters: p_sum as checkbox.
selection-screen end of line.
selection-screen end of block b2.
Regards,
Rich Heilman

When or How does the time stamp on Report Manager / Data Collection change

Hi,
I have been waiting since 10am waiting for data to be available. Unfortunately, the Sun MC has not updated the time stamp. I am unable to create graphs for the machines I setup this morning? Any ideas on how to post data faster than waiting forever for Sun MC server?
thanks

Hi,
Clearly a bug. You can try changing your Tools|Preferences|Database|NLS|Timestamp Format to match the Date Format as a workaround. Otherwise why not upgrade to the lastest production SQL Developer release (3.1.07.42)? The bug does not occur there.
Regards,
Gary
SQL Developer Team

How to configure Local Info in Site Manager ASP (Mac to Win)

I am developing an ASP page for Windows 2000 IIS 5.0. If I am
developing on my desktop which is XP Pro, I have setup the local
IIS webserver and everything works well. If I choose to develop ASP
pages in Dreamweaver on my Mac OS X, what do I use as my local web
server? Can I use just configure and use the Apache server on the
Mac side and perform my Live Data views locally and then just
publish on over to Windows for the IIS? This is just confusing and
I wanted to get some insight.

I am developing an ASP page for Windows 2000 IIS 5.0. If I am
developing on my desktop which is XP Pro, I have setup the local
IIS webserver and everything works well. If I choose to develop ASP
pages in Dreamweaver on my Mac OS X, what do I use as my local web
server? Can I use just configure and use the Apache server on the
Mac side and perform my Live Data views locally and then just
publish on over to Windows for the IIS? This is just confusing and
I wanted to get some insight.

How to Configure Landing pages in Access Manager

On successful authentication, I need to redirect every user to to a specific page - Landing page. Which property I shoud set in AMagent.properties file to do that ?
Thanks
Abhijeet_tcs

Hi,
Were you successful in configuring a landing page in the Authentication Policies.
I have similar requirement, but it doesnot work somehow the login page goto parameter seems to take preference.
Any help is higly appreciated
thanks

How to Configure PeopleTools 8.49 Report Manager ?

Similar Messages

Maybe you are looking for