How to configure SSL in tomcat and transfer data through HTTPS.

Hi all,
I hav an urgent requirement for transfering data through HTTPS.But hav no idea how to achieve that,using SSL.
For that i have to configure tomcat.What and all i hav to do
download and which and all files i hav to alter for configuring the tomcat.
seeking for ur help,
thank you

Multi-posted.
http://forum.java.sun.com/thread.jspa?threadID=591116&messageID=3079266#3079266
http://forum.java.sun.com/thread.jspa?threadID=591062&messageID=3078566#3078566
http://forum.java.sun.com/thread.jspa?threadID=590987&messageID=3077736#3077736

Similar Messages

How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

Hi ,
Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA outside interface .
Accordingly you can configure NAT
HTH
Sandy .

How do I ssl enable targets and EM in 10.1.2

How do I ssl enable targets and EM in 10.1.2 in
"Standalone console" (is this the correct forum?)
These are the steps I followed
1) emctl secure em
This enabled ssl for EM.
Problem is with monitoring a target - Oracle Reports
2) The I SSL Enabled reports. Added a port in webcache and gave default wallet directory. Following works
https://host:port/reports/rwservlet?getserverinfo
3) In sysman/emd/targets.xml , for reports target I changed http protocol to https and also changed port
(Report uses HTTP Fetchlet for getting metrics)
But I am not able to monitor Oracle Reports successfully.
I get the following in EM logs
emias.log
<MetricGetError ERRMSG="Error connecting to <host:port> return status = -1 " ERRID="32" ERRCODE="3">
emagent.trc
2005-01-05 18:29:07 Thread-2228 ERROR ssl: nzos_Handshake failed, ret=29024
2005-01-05 18:29:07 Thread-2228 ERROR http: 652: Unable to initialize ssl connection with server, aborting connection attempt
2005-01-05 18:29:08 Thread-2228 ERROR engine: [oracle_repserv,Ben.<host>_Reports_Server:rep_strep13,ServerPerf] : nmeegd_GetMetricData failed : Error connecting to <host>:4447 return status = -1
Any idea how to do SSL enable targets (in particular Oracle Reports) in 10.1.2 ?

Open and close iPhoto or GarageBand and relaunch FCP X. Sometimes just relaunching FCP X works also. You can trash FCP X preferences as well if the above doesn't work.

How to configure SingleSignOn between GRC and BOBJ 4.1

How to configure SingleSignOn between GRC and BOBJ 4.1?
We have configured the System entitlement in BOBJ CMC. But didn't do anything on the GRC system.
User can login from BOBJ to GRC with password but not with SSO.
We haven't configured SNC . I don't this for this simple flow, we need to have SNC.
We haven't set up the Trust certificate exchange as well between BOBJ and GRC.
Please help us to know what are the mandatory settings need to be done to create a Relational connection for a ERP/GRC system from BOBJ client tool IDT?
thanks,
Tilak

How to configure SingleSignOn between GRC and BOBJ 4.1?
We have configured the System entitlement in BOBJ CMC. But didn't do anything on the GRC system.
User can login from BOBJ to GRC with password but not with SSO.
We haven't configured SNC . I don't this for this simple flow, we need to have SNC.
We haven't set up the Trust certificate exchange as well between BOBJ and GRC.
Please help us to know what are the mandatory settings need to be done to create a Relational connection for a ERP/GRC system from BOBJ client tool IDT?
thanks,
Tilak

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

How can we share and transfer data at Labview using the internet

How can we share and transfer data at Labview using the internet
Dr. Eugene Berman, Moran Kamilyan and Ravit Bar

[email protected] wrote:
How can we share and transfer data at Labview using the internet
Check these links:
Basic TCP/IP Communication in LabVIEW
Data Sockets
Integrating the Internet into Your Measurement System

I want to transfer data through the serial port in the same coding that hyperterminal uses. How can i do it?

The serial port seems to be working, and labview seems to be sending the data, but the problem is in which format does it send the data, because in hyperterminal i just input the string "JDX" and it sends it to my device, with labview it sends something but my device does not recognize it.

nobuto wrote:
> I want to transfer data through the serial port in the same coding
> that hyperterminal uses. How can i do it?
>
> The serial port seems to be working, and labview seems to be sending
> the data, but the problem is in which format does it send the data,
> because in hyperterminal i just input the string "JDX" and it sends it
> to my device, with labview it sends something but my device does not
> recognize it.
Hyperterminal adds the carriage return/line feed to the string which is
generated by the return key to send out the current line. LabVIEW simply
sends out what you tell it, so try to set the string to "Show \ Display"
format and add a \r or \n or \r\n to the command you want to send out.
Assumes of course that you set the right baudr
ate/bits/parity etc in
LabVIEW with the VISA property node, when opening the serial port.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Update and transfer data via BADI LE_SHP_TAB_CUST_HEAD

Greetings All,
I've a requirement to create a custom tab in the VL01N/VL02N/VL03N header record displaying custom fields.
I've successfully implemented BADI LE_SHP_TAB_CUST_HEAD, created a subscreen, appended my custom fields to the LIKP table via append structure, and can now view my fields in the transactions listed above.
I'm having trouble updating the fields in the subscreen and save the values back to the LIKP table. First question is a) do I do this via the PBO PAI modules in my subscreen, or should I be doing this in the BADI?
Second question is, if I shuodl be doing this in the BADI, how do I do it. A simple example is that I have created a field called ZZ_CUST_TIME in LIKP, added it to my sub-screen using data dictionary linking.
How do I pass a value entered into this field via VL02N back to the transaction for update?
Any suggestions would be greatfully appreciated.
Regards,
Steve

Dear Abhishek, can you explain the step..in this step screen is comming but custom fields value is not coming and also likp table is not updated
Correct AnswerRe: Update and transfer data via BADI LE_SHP_TAB_CUST_HEAD
Abhisek Biswas Jan 21, 2009 7:28 AM (in response to Stephen Keam)
Hi Stephen,
You can do it by using PBO and PAI modules of the screen that you created. But you have to transfer the data from subscreen to the BADI method TRANSFER_DATA_FROM_SUBSCREEN and aslo from method TRANSFER_DATA_TO_SUBSCREEN to the subscreen. This will update the screen field data to LIKP.
You can aceive this by two ways.
1) You can use EXPORT in method TRANSFER_DATA_TO_SUBSCREEN and then IMPORT the value in the screen PBO. And You can EXPORT data from screen PAI and IMPORT data in method TRANSFER_DATA_FROM_SUBSCREEN.
2) Anither way to do it is by using Function modules and Function Group instead of EXPORT/IMPORT.
Create a Function group. In the global data define a structure/Work Area of type LIKP.
DATA w_likp TYPE likp.
Then create two Function modules, one to export data and another to import data.
Let us assume that the export FM takes in IS_LIKP as input and the import FM outputs the value of LIKP into ES_LIKP.
Then pass the value is_likp to the export FM in the BADI method TRANSFER_DATA_TO_SUBSCREEN and in the screen PAI pass the LIKP data to the export FM.
In the export Function module write the following code:
MOVE is_likp TO w_likp
Then in the Import FM write the following code:
MOVE w_likp TO es_likp.
The import FM is called from method TRANSFER_DATA_FROM_SUBSCREEN and from screen PBO.
This will solve your problem.
Regards,
Abhisek.
Alert Moderator
Like (0)
Reply

Get OBJEC hide screen and transfer data

Hi experts!
How can i hide this kind of selection screen when i call
"get objec"
and how can i transfer my data manually to the selection range of get objec.
eg. i want to use the "get objec" function to collect the data for three objectid.
i could loop and call get objec 3 times and set the PCHOBJID-LOW value before, but there must be a way to do this with a range.
can someone help me
greets, thomas

Dear Abhishek, can you explain the step..in this step screen is comming but custom fields value is not coming and also likp table is not updated
Correct AnswerRe: Update and transfer data via BADI LE_SHP_TAB_CUST_HEAD
Abhisek Biswas Jan 21, 2009 7:28 AM (in response to Stephen Keam)
Hi Stephen,
You can do it by using PBO and PAI modules of the screen that you created. But you have to transfer the data from subscreen to the BADI method TRANSFER_DATA_FROM_SUBSCREEN and aslo from method TRANSFER_DATA_TO_SUBSCREEN to the subscreen. This will update the screen field data to LIKP.
You can aceive this by two ways.
1) You can use EXPORT in method TRANSFER_DATA_TO_SUBSCREEN and then IMPORT the value in the screen PBO. And You can EXPORT data from screen PAI and IMPORT data in method TRANSFER_DATA_FROM_SUBSCREEN.
2) Anither way to do it is by using Function modules and Function Group instead of EXPORT/IMPORT.
Create a Function group. In the global data define a structure/Work Area of type LIKP.
DATA w_likp TYPE likp.
Then create two Function modules, one to export data and another to import data.
Let us assume that the export FM takes in IS_LIKP as input and the import FM outputs the value of LIKP into ES_LIKP.
Then pass the value is_likp to the export FM in the BADI method TRANSFER_DATA_TO_SUBSCREEN and in the screen PAI pass the LIKP data to the export FM.
In the export Function module write the following code:
MOVE is_likp TO w_likp
Then in the Import FM write the following code:
MOVE w_likp TO es_likp.
The import FM is called from method TRANSFER_DATA_FROM_SUBSCREEN and from screen PBO.
This will solve your problem.
Regards,
Abhisek.
Alert Moderator
Like (0)
Reply

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How do I get my calendar and contacts data to sync to computer?

After instal of Maverick, iPhone data syncs to iCloud, but not to computer. How do I get my calendar and contacts data to sync to computer?

Sounds like your Mac is not logged into the same iCloud account that your phone is. When Mavericks is installed it prompts you for an AppleID during setup.
Unfortunately and confusingly it then uses that AppleID to help you set up the Apple Store, iCloud, and Messages even though many users do not use the same AppleID for all of those services. This is particularly true of familys that share one AppleID for the "Store" but use separate AppleID's for each users iCloud data.
Therefore, put your iPhone next to your Mac and go to "Settings" > "iCloud". Make sure that the iCloud account listed on your iPhone is the same as the one listed when you go to "System Preferences" > "iCloud" on your Mac. If they match (or not) then click "sign out" on your Mac to disconnect the account. Then, on the Mac (still in the iCloud preference pane), log (back) into the same iCloud account being used on your iPhone and enable the same set of services that are enabled on your iPhone (particularly calendar and contacts).
Then, open the Contacts application on the mac and iCal on the Mac and walk away for a few minutes to allow the data to sync. You may then want to create a test calendar event and change a contact to see if they sync up.
One additional thought is to make sure that your iPhone is set to "Push" for iCloud. That will assure that it's syncing immediately while you are testing this.
Hope this helps.

To create a new file in application server and transfer data to ti

i am doing the following where i have to create a new file in application server and transfer data to tht file from an internal table.but its saying file cant be opened.the path i am giving to parameter p_prefil is /tmp/prachi.txt.
wats the prob..can anyone help.
DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc <> 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
if sy-subrc <> 0.
write: 'file can not be written'.
stop.
endif.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc <> 0.
write: ' file cannot be closed'.
stop.
endif.

DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc ne 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
write: 'file can not be written'.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc ne 0.
write: ' file cannot be closed'.
stop.
endif.

Can I back up my old iPhone and transfer data to my new iPhone from the computer at the same time?

Can I back up my old iPhone and transfer data to my new iPhone from the computer at the same time?

iOS: Transferring information from your current iPhone, iPad, or iPod ...

HT4859 The guy at the verizon store programmed my phone before I got the chance to restore my apps, etc. from icloud- therefore i did not get to go through the setup assistant.. How do i get my apps and app data back on my phone w/o having to go through

The guy at the verizon store programmed my phone before I got the chance to restore my apps, etc. from icloud- therefore i did not get to go through the setup assistant.. How do i get my apps and app data back on my phone w/o having to go through and re-

To restore from an iCloud backup you have to erase the phone and start over. To do this, go to Settings>General>Reset, tap Erase All Content and Settings, then go through the setup assistant again and when given the option, choose Restore from iCloud Backup. There is no other way to do this.
Be sure you phone is connected to wifi and your charger as this is likely to take some time to finish.

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
<Email Edited By Host>

There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
Hope this helps.
Vinit

How to configure SSL in tomcat and transfer data through HTTPS.

Similar Messages

Maybe you are looking for