How to configure the Auto Job to add datafiles via OEM Cloud Ctrl 12c ?

Hi All,
1.Could you please give me the step by step procedure to automate the datafile addition via OEM while tablespace crossed its threshold limit? - DB(11gr2) is under OEM monitoring.
2.How to reload the database information after any configure change in OEM?
Oracle Enterprise Manager Cloud Control 12c
Thanks.
Bala

Hi Mark/All,
Please find the below for my answer.
1.Could you please give me the step by step procedure to automate the datafile addition via OEM while tablespace crossed its threshold limit? - DB(11gr2) is under OEM monitoring.
Have you considered using AUTOEXTEND? - Yes, Since we have TB of storage available to use for datafiles.
2.How to reload the database information after any configure change in OEM?
Could you expand on this please? - I changed the tablespace threshold limit from 85% to 65% for validation, but it didn't notify the tablespace issue throw mail[And it seems the database info Collected date is yesterday so i like to recollect the database information from OEM].
Thanks
Bala

Similar Messages

How to configure the crystalreports job server

hi everyone,
we are having crystal reports itself in our cmc .
i am having a scenario where the reports are stored in cmc i am showing you the folder hierarchy how the reports r stored in cmc( daily/eod/ak or fl or az), i am having the specific crystal reports for that particular state in that folder. i want to schedule these crystal reports fro every day. i select file-system as destination for these crystal reports. my scenario is these reports need to be stored on the server(i mean the location of the file-system) under different directories like
/abcd/xyz/crystalreports/daily/eod/ak or
/abcd/xyz/crystalreports/daily/eod/az.
but i am unable to do that, i can see just to point all the crystal reports to one location i.e /abcd/xyz/crystalreports
i did changes to my crystal reports job server by adding file-system to the destination and specified the path were i want to store the reports but i cannot see how to store these crystal reports for different states in different directories on the server(i mean abcd/xyz/crystalreports/daily/eod/az)
we r having boe xi 3.1 sp3 on solaris
we want to schedule crystal reports thats the reason i asked for crystalreports job server
Edited by: richa123 on Jan 13, 2011 7:41 PM
Edited by: richa123 on Jan 13, 2011 7:44 PM

Hi,
If you are talking unmanaged reports (network location) then yes you can do this but if you are talking managed reports (reports stay in CMC) then you can not specify the folder path for the successful instance. The destination will be default enterprise and it will be same folder where the parent report resides, to keep the relationship intact.
I hope this helps.
Thanks,
Muhammad

How to configure the batch job on weblogic server

I have created a standalone java application using quartz.i want to deploy the standalone program on weblogic so as it could be run as a batch job.
Can you please help me how could i deply the java application on the weblogic and run the same.

To use Quartz primarily within an application server environment,include the Quartz JAR within the enterprise application (.ear or .war file). However, if you want to make Quartz available to many applications then simply make sure it's on the classpath of your appserver.
You can also deploy it as a jar file or a library module as required.
Quartz depends on a number of third-party libraries (in the form of jars) which are included in the distribution .zip file in the 'lib' directory. To use all the features of Quartz, all of these jars must also exist on your classpath.
-Sandeep

How to configure the .EAR to the OC4J server step by step ?

I have configured the JavaBean of the OC4J server with the following step:
1.create the eosp.ear with the JDeveloper's wizard
2.copy the eosp.ear to the OC4J Server with the Path:
J2EE_HOME/applications/
3.modify the server.xml and add the following words:
<application name="eosp" path="../applications/eosp.ear" auto-start="true"/>
4.restart the OC4J server and show the information:
Auto-deploying eosp (New server version detected)...
5.create the new JSP and this source code is:
<%@ page import="com.beautybeard.eosp.common.*"%>
<%@ page import="com.beautybeard.eosp.constant.*"%>
6.visit the JSP and show the error information:
Error parsing JSP page /eosp/usr_profile/login.jsp
Syntax error in source/eosp/usr_profile/login.jsp.java:5: Package com.beautybeard.eosp.common not found in import.import com.beautybeard.eosp.common.*; ^/eosp/usr_profile/login.jsp.java:6: Package com.beautybeard.eosp.constant not found in import.import com.beautybeard.eosp.constant.*; ^2 errors
why?
why can not find the package?
please help me out

Hi Sky-
It looks like you have a web application only.
You need to create a war file as described above. A war file is a jar'd file containing your web components, including your javabean class files, etc. JDeveloper 9i can do this for you. You've already done the hard work. Suppose that the project you have created that contains your javabeans, etc in JDev 9i is called myproject (with myproject.jpr as the project file). Right click on the myproject.jpr in the JDev navigator and select 'new...', go to Deployment Profiles and select J2EE Web Module (WAR File) - a general screen will pop up asking you to save the deployment profile (you can just use the default if you want). Once you select OK on that, you will get a screen that calls itself the J2EE Web Module Deployment Profile Settings. This is the screen that you can use to enter your information.
Your servlet and javabean classes will go into WEB-INF/classes subdirectory that you see to your left in this window. Simply select the WEB-INF/classes entry and it will display a list of your java sources (it will only place the compiled output in this directory - there is a toggle for it).
Once you have specified that your javabean and servlet classes go in this directory, you should be set. Go ahead and save / close. In your navigation screen under your project (myproject.jpr or whatever your project name is) you will see your files, jsps, etc and something called webapp1.deploy (if you accepted the default). If you right-click on that, you will get a menu that asks a number of things, one of which is to Deploy to EAR file. Select that entry and it will create an ear file for you. You can play with the various settings to change the name of the ear file, but that's about all you have to do. Once this is completed, you can put the EAR file on your linux box or wherever you want, adjust your server.xml and default-web-app.xml files and launch the app!
Good luck!
Ray
Hi,Ray
Thank you for giving me the detail information!
I'm sorry that I can not give the detail and clear problem ,which make you delusoried.
ok,now I give you my aim.
1. I will construct my application system with JavaBean(not EJB),Servlet,JSPs (linux+IAS+JDeveloper+Oracle8i database)
2. I will package business function with JavaBean. example:
* CheckLogin.java
package com.beautybeard.eosp.javabean.usrprofile;
import com.beautybeard.eosp.common.*;
import com.beautybeard.eosp.data.*;
import java.io.*;
import java.lang.*;
public class CheckLogin{
public CheckLogin()
//do nothing here
public boolean getCheckLogin(){
3. I will control the request and response with Servlets.
example:
*CheckLoginSevlet.java
package com.beautybeard.eosp.servlet.usrprofile;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.sql.*;
import com.beautybeard.eosp.servlet.*;
import com.beautybeard.eosp.javabean.usrprofile.*;
public class CheckLoginServlet extends DefaultServlet
public void service(HttpServletRequest req,HttpServletResponse res) throws IOException, ServletException
//use the JavaBean
CheckLogin cl = new CheckLogin();
if (cl.getCheckLogin){
res.sendRedirect("login.jsp");
}else{
res.sendRedirect("err.jsp");
4. I will display the result with JSPs:
example:
<%//login.jsp%>
<%@ page import="com.beautybeard.eosp.common.*"%>
<%@ page import="com.beautybeard.eosp.data.*"%>
5. I have success on running the above steps in the 9iJDevelper(pure java) environment(OS:Windows 2000 Server), and now I will move the JSPs ,Servlets,JavaBeans to the Server(linux) without the JDeveloper's deployment wizard.
how to configure the IAS to carry my point?
thank you!
Sky liu

How to take the cron job log in HP UX?

Hi,
How to take the cron job log in HP UX
I need to run a backup and other stuff everyday. How do I check and start cron service under HP-UX UNIX operating system? How do I write cron jobs?
A. Cron service is required to run jobs and tasks such as backup.
You must login as the root to run following commands. Each user that is using the cron service must have a cron configuration file in the /var/spool/cron/crontab directory. Also users are permitted if their name appeared in /var/adm/cron/cron.allow file
Task: Find out if cron is running under HP-UX
Type the following command at a shell prompt
# ps -ef | grep cron
Open /etc/rc.config.d/cron file
vi /etc/rc.config.d/cron
Set control variable to 1 to enable cron: CRON=1
Set control variable to 0 to disable: CRON=0
Close and save the file. To start or stop cron you can type the following command:
# /sbin/init.d/cron start <-- start cron
# /sbin/init.d/cron stop <-- stop cron
Task: HP-UX Start cron service
If cron is not running, simply type:
# cron
Task: Edit / create cron jobs
Type the following command to submit a cron job:
# crontab -e
List your cron file:
# crontab -l
Backup all your cron jobs:
# crontab -l > ~/backup.cron.jobs
Remove ALL cron job:
# crontab -r
Task: Crontab file format
Cron file format is as follows:
MIN HOUR DATE MONTH DAY /PATH/TO/COMMAND
0-59 0-23 1-31 1-12 0-6 /root/scripts/backup2tape.shEasy to remember crontab file format:
* * * * * command to be executed
| | | | |
| | | | ----- Day of week (0 - 7) (Sunday=0 or 7)
| | | ------- Month (1 - 12)
| | --------- Day of month (1 - 31)
| ----------- Hour (0 - 23)
------------- Minute (0 - 59)To run /root/script/backup at 23:00, every day, enter:
# crontab -e
Append following
0 23 * * * /root/script/backupRun foo job very weekday (MON-Fri) at 6am, enter:
0 6 * * 1-5 /root/script/backupFor more information refer to cron and crontab man pages.
Subscribe to our free e-mail newsletter or RSS feed to get all updates. You can Email this page to a friend.
Related Other Helpful FAQs:
What is Cron?
Linux Start and stop the cron or crond service
Run crontab Every 10 Minutes
Linux / UNIX Setup and run php script as a cron job
Stop Ubuntu / Debian Linux From Deleting /tmp Files on Boot
Discussion on This FAQDavid Says:
January 15th, 2008 at 12:21 am
You might note that all files normally found in /etc/init.d, /etc/rc*.d, and others are all in /sbin in HP-UX 10.20 and up.
Note too that your formatting is off in the description of the /etc/rc.config.d/cron file. Also, if you run /usr/bin/cron instead of /sbin/init.d/cron start, the /etc/rc.config.d/cron file is not used.
Regards,
Satya

I guess it would :)
btw, how did this piece miss from the contents pasted by the OP ?
The doc has given all details of CRON and missed where to see the logfiles. :)
****Added****
I tried man crontab in windows, i dont see it.i overlook most of the things, i would have done the same ;)
Edited by: Bobcatalog on Oct 23, 2008 9:40 AM

How to schedule the background job daily twice?

Hi,
How to schedule the background job daily twice? any conditions?
Regards,
Srihitha

see the step by step procedure.
Scheduling Background Jobs:
1. Background jobs are scheduled by Basis administrators using transaction SM36.
2. To run a report in a background, a job needs to be created with a step using the report name
and a variant for selection parameters. It is recommended to create a separate variant for each
scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
company codes).
3. While defining the step, the spool parameters needs to be specified
(Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
to find the spool request. The following parameters needs to be maintained:
a. Time of printing: set to Send to SAP spooler Only for now
b. Name abbreviated name to identify the job output
c. Title free form description for the report output
d. Authorization a value defined by Security in user profiles to allow those users to access
this spool request (authorization object S_SPO_ACT, value SPOAUTH). Only users with matching
authorization value in their profiles will be able to see the output.
e. Department set to appropriate department/functional area name. This field can be used in
a search later.
f. Retention period set to Do not delete if the report output needs to be retained for more
than 8 days. Once the archiving/document repository solution is in place the spool requests could
be automatically moved to the archive/repository. Storage Mode parameter on the same screen
could be used to immediately send the output to archive instead of creating a spool request.
Configuring user access:
1. To access a report output created by a background job, a user must have at
least access to SP01 (Spool requests) transaction without restriction on the user
name (however by itself it will not let the user to see all spool requests). To have
that access the user must have S_ADMI_FCD authorization object in the profile with
SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
2. To access a particular jobs output in the spool, the user must have
S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
in the Print Specifications of the job (see p. 3.d above).
3. Levels of access to the spool (display, print once, reprint, download, etc) are
controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
BASE access (display).
On-line reports:
1. Exactly the same configuration can be maintained for any output produced
from R/3. If a user clicks Parameters button on a SAP Printer selection dialog, it
allows to specify all the parameters as described in p. 3 of
Scheduling background jobs section. Thus any output created by an online report
can be saved and accessed by any user authorized to access that spool request
(access restriction provided by the Authorization field of the spool request
attributes, see p. 3.d of Scheduling background jobs section).
Access to reports output:
1. A user that had proper access (see Configuring user access above) can
retrieve a job/report output through transaction SP01.
2. The selection screen can be configured by clicking Further selection
criteria button (e.g. to bring Spool request name (suffix 2) field or hide other
fields).
3. The following fields can be used to search for a specific output (Note that
Created By must be blank when searching for scheduled jobs outputs)
a. Spool request name (suffix 2) corresponds to a spool name in p. 3.b in
Scheduling background jobs section above).
b. Date created to find an output of a job that ran within a certain date range.
c. Title corresponds to spool Title in p. 3.c in Scheduling background jobs
section above).
d. Department - corresponds to spool Department in p. 3.e in Scheduling
background jobs section above).
4. Upon entering selection criteria, the user clicks the Execute button to
retrieve the list of matching spool requests.
5. From the spool list the user can use several function such as view the
content of a spool request, print the spool request, view attributed of the spool
request, etc. (some functions may need special authorization, see p.3 in
Configuring user access)
a. Click the Print button to print the spool request with the default attributes
(usually defined with the job definition). It will print it on a printer that was
specified when a job was created.
b. Click the Print with changed attributed button to print the spool request
with the different attributes (e.g. changing the printer name).
c. Click the Display contents button to preview the spool request contents. A
Print and Download functions are available from the preview mode.

How to configure the smtp server..

i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...

This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
    private String d_email,d_password;
     * This example is for gmail, you can use any smtp server
     * @param d_email --> your gmail account e.g. [email protected]
     * @param d_password --> your gmail password
     * @param d_host --> smtp.gmail.com
     * @param d_port --> 465
     * @param m_to --> [email protected]
     * @param m_subject --> Subject of the message
     * @param m_text --> The main message body
    public String send(String d_email,String d_password,String d_host,String d_port,
            String m_from,String m_to,String m_subject,String m_text ) {
        this.d_email=d_email;
        this.d_password=d_password;
        Properties props = new Properties();
        props.put("mail.smtp.user", d_email);
        props.put("mail.smtp.host", d_host);
        props.put("mail.smtp.port", d_port);
        props.put("mail.smtp.starttls.enable","true");
        props.put("mail.smtp.auth", "true");
        //props.put("mail.smtp.debug", "true");
        props.put("mail.smtp.socketFactory.port", d_port);
        props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
        props.put("mail.smtp.socketFactory.fallback", "false");
        SecurityManager security = System.getSecurityManager();
        try {
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getInstance(props, auth);
            //session.setDebug(true);
            MimeMessage msg = new MimeMessage(session);
            msg.setText(m_text);
            msg.setSubject(m_subject);
            msg.setFrom(new InternetAddress(m_from));
            msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
            Transport.send(msg);
            return "Successful";
        } catch (Exception mex) {
            mex.printStackTrace();
        return "Fail";
    //public static void main(String[] args) {
    //    MailSender blah = new MailSender();
    private class SMTPAuthenticator extends javax.mail.Authenticator {
        public PasswordAuthentication getPasswordAuthentication() {
            return new PasswordAuthentication(d_email, d_password);
}

How to configure server process in sld add server in configtool

hi friends
i have added the server process in configtool after restaring the server sld server is stoped it not staring and it gives a messge that configur server process in sld adiminstration
can any one help how to configure the server in sld ?
and what are ther prerequesties that i need to take when i am adding sever proces in configtool and how many server proces i can add in the java engin
after incersing server proces how to configur in sld ?
regards
raja

hi janu
thanks for responding
i know how to configur was abap and was java in sld. i have issue when i add 2 server process in configtool , sld server is stoped there it is giveing maintal profile in the sld administration. i would like to know what need to me manintatinge in sld this is my issue .
regards
raja

Where to configure the auto output generation upon goods receipt

Dear all,
I need to configure the auto generate of the output message upon the goods receipt. How do I do that?
Thanks for advice.
Regards,
Edwin

Hi friend
Apart from Maintaining condition record as suggested in previous thread one more important activity is
In Migo screen on Header data section inside generaltab
just below Posting date feild you will find Printer Icon right hand side to that there is one check box, this must be checked either manually at the time of GR/GI creation or is preselected if the parameter NDR has been set to X (capital letter!) in your user master recordset. This is preselected if the parameter NDR has been set to X (capital letter!) in your user master record
Reward if usefull
Regards
SE

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to schedule the back job scheduling

how to schedule the back job for bdc , can we use it for both call transaction and session method . how to schedule the back job schedulinng for lsmw

hi,
Use t-code SM36 for scheduling.
<b>Do reward.</b>

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

How to configure the mail in Sales Support of SAP SD

Hi,
Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
company. For this every time we are changing the sold to party in quotation and taking printouts then
sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
once to our 300 users may i know about how to configure the mail for this scenario.
Thanks and Regards
MH

Hi Prashant,
Thanks for you immediate responce, Can you give me the configuration steps in detail.
Thanks and Regards,
MH

How to configure the JMS application in WSAD 5.0

hi
i need to configure an JMS application in WSAD 5, but while configuring the application i am checked with intial context exception. but i have configured the jndi in the server. but i cant able to run the application.
can anybody help me like how to configure the JMS application in WSAD (can we configure it without MQ simulator if yes i need the steps)
thanks in advance

Hi,
did you check the WebSphere documentation or ask a question on an IBM forum?
Frank

In Exports sales process, how you configure the Duty Draw Back

in my case
we r creating Exports but
duty unavailability of time and time taking process in export processing
we are creating Excise invoice and cenvat is debited .
now we r asking the govt. for the duty draw back for the value already cenvat is debited with proper documents like ARE1 etc.
how to manage this duty back and what r the replications or changes thereafter
thanks in advance

Hi Sunitha,
Pls can u explain how did u solve (In Exports sales process, how you configure the Duty Draw Back) this issue....since i don't have idea abt this...but shortly i am going to do this in my client place....
thanks,

How to configure the Auto Job to add datafiles via OEM Cloud Ctrl 12c ?

Similar Messages

Maybe you are looking for