How to configure the Http sender adapter

Now i have look through the sap lib about the http sender adapter
and i know the url is
http://hostname:port/path?namespace=<...>
&interface=<...>&service=<...>&cmd=T&loaderXML=< message object >&end=yes
My questions are:
1)the path in the URL is "/sap/xi/adapter_plain", if not, what is it?
2)the message payload is right?
any reply is appreciated
Thank you very much

Hi Leo,
For a HHTP Scenario:
DESIGN:
1. Create DataTypes for source and Destinations. Create elements for all the text fields of your HTTP Client so that they can all be mapped into the destination file
2. Create MessageTypes for the two datatypes.
3. Create Message Interfaces. The One for HTTP is the sender, Asynchronous ( as no response is expected) and one for File is receiver, asynchronous.
4. Do the mapping. It will be mostly a one to one mapping of the fields.
5. Create the Interface Mapping.
Configuration:
1. Import your Business System under your Configuration Scenario.
2. Create 2 communication channels. One for Http as a sender and one for your receiver say IDoc.
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
3. Do the Receiver Agreement for Idoc. HTTP doesnt need a sender agreement.
4. DO the Receiver Determination and Interface Determination.
Weblog which talk about the same scenario:-
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
(use case) and explained it...
Check this SDN tv demo, it has detail of HTTP adapter setup.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
Refer to this link for adapter settings.
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
You should also have a HTTP client to send message to XI. In the connecting parameters to XI u have to use the URL in the pattern mentioned . U have to give all the configuration details in the URL.
If you give me your mail id or if you can mail me at [email protected], i can send you a HTTP CLIENT.....In which you need to view the source code and change the username and password to send message to XI.
Regards,
Abhy

Similar Messages

How to use the http sender adapter

Hi,
I'm trying to use the http sender adapter but not getting the result.
1) I've created the commnunication channel in Integration Directory.
2) I have my url:
http://<server>:56000/sap/xi/adapter_plain?service=BS&namespace=urn%3Acompany%3Apoc&interface=interface
3) When i copy that url in a browser i get a login prompt. When i log in i get a message that navigation is cancelled.
What steps do i need to do to use this url to send my xml message to the adapter engine. Do i need a special system user for this? Any other tools required? (i have httpclient but using that doesnt send messages to the adapter_plain; i think)
I feel i'm just missing one little thing, but what is it.
kr
Robert

Hello Team,
I added the user name & pwd to query string & trying to access from IE and still getting blank page.
Is this what is expected or there is something wrong in URL. I am able to send the XML from HTTP Test tool.
My URL is :
http://abc:50000/sap/xi/adapter_plain?namespace=urn:xyz.com:A_To_ERP_Payment_balance_Request&interface=SI_A_CHK_balance_OUT&service=BC_XX_XXX&sap-user=myuser&sap-password=mypassword&sap-client=001&sap-language=EN
Please advice.

How to configure pi jdbc sender adapter

Dear all:
i know adapter can poll data at a interval time ,but i have a special requirement.does the interval time that pi poll data can modify in a webdynpro project .if possible.how to do?
thinks very much !

Hi Kevin ,
The way you want may be scheduling the adapter can help you.
checkout the threads :
Scheduling adapters
File adapter schedule
Scheduling the file adapter
Re: Availability Time Planning for communication channels
check the concept of availabilty time planning concept of XI/PI :
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417400%29ID0150513450DB01316163558791549419End?blog=/pub/wlg/5078
Regards ,

URL in HTTP sender adapter

Hi,
I have a scenario where I want to configure a HTTP sender adapter.
I have a HTTP PUT url of a 3rd party application from where the HTTP adapter should poll and pull the files into PI.
Is this possible? If yes, where and how do I mentioon the URL?
Please help!
Thanks,
Pratibha.

Hi,
That means, the sender aplication has to write a http://<hostname:port>/<path>?<query-string> type query?
Is there no other option?
Is it not possible with the SOAP sender adapter also?
Thanks,
Pratibha.

Http sender adapter: QoS is interpreted as Best Effort by PI 7.11

Hi
I have a scenario, where I receive an xml OrderResponse via an http sender adapter and I then map it to an iDoc which is sent to the backend system.
BUT: for some reason, PI thinks, that the Quality of Service is BE, and I get the error "Only asynchronous processing supported for IDoc adapter outbound processg".
I have checked both the http sender adapter, the sender agreement, the interface mapping, the service interface and the operation mapping and nowhere can I see, that best effort is selected.
The OrderResponse is sent from an external partner and is routed through a load balancer and an SAP web dispatcher before arriving to PI.
Any suggestions would be highly appreciated.
MIkael Lund

The external partner is sending the OrderResponse to this URL (external URL):
https://xxxxxx.xxxxxxxx.dk/sap/xi/adapter_plain?service=LM&namespace=http://xxxxxxxx.dk/XCBL/OrderResponse&interface=xCBLOrderResponse35Out
this URL is being translated to an internal URL:
https://yyyyyyy.yyyyyyy.dk/sap/xi/adapter_plain?service=LM&namespace=http://xxxxxxxx.dk/XCBL/OrderResponse&interface=xCBLOrderResponse35Out
So how should the external and/or internal URL be altered?
Thanks for a very quick answer by the way
MIkael

How to handle flat file with variable delimiters in the file sender adapter

Hi friends,
I have some flat files in the ftp server and hope to poll them into XI, but before processing in XI, I hope to do some content conversion in the file sender adapter, according to the general solution, I just need to specify the field names, field seperator, end seperator, etc. But the questions is:
The fileds in the test data may have different amount of delimiters (,), for example:
ORD01,,,Z4XS,6100001746,,,,,2,1
OBJ01,,,,,,,,,,4,3
Some fileds only have 1 ',' as the delimiter, but some of them have multiple ','.
How can I handle it in the content conversion?
Regards,
Bean

Hi Bing,
Plz do refer the following blogs u will get an idea:
File content conversion Blogs
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Vinod.

How to Configure Reciver HTTP Adapter

Hi,
i am doing Proxy-HTTP syncronous scenario.
Proxy will fetch XML file located in one server.
(example: www.yahoo.com/exchange_rate.xml)
i have following problems.
1. How to configure the Reciver HTTP Adapter.
2. What should I use in Address Type.
HTTP Destination or URL Address.
3. If I use HTTP Destination , The length of the field is very short to accomodate complete address.
4. If I use URL address, what should I put in all the fields , like Target host, Service Number, path.
I have URL , something like this, www.yahoo.com/exchangerates.xml
I dont know what to put in Target Host, service name and path.
Please help. thx. BD.

Hello,
if you use a HTTP-Destination it uses a rfc-destination.
So you configure first a rfc-destination (in sm59 of type G)
and name it for example RFC_EXAMPLE and then you
use this name for the HTTP-Destination in your adapter.
if you use the url
Target host:
- you can use the ip
Service Number:
- that means the port you want/must use
path:
- in your case: /exchangerates.xml
Regards
Patrick

How to Call HTTP Sender Adapter of Other Scenar from HTTP Receiver Adapter?

Hi,
I have a requirement to call HTTP Sender Adapter of Other Scenario from HTTP Receiver Adapter?
or
call SOAP Sender Adapter of Other Scenario from SOAP Receiver Adapter?
i.e
SOME SENDER - > PI - > HTTP Receiver - > calling -> HTTP Sender -> PI -> SOME RECEIVER
SOME SENDER - > PI - > SOAP Receiver - > calling -> SOAP Sender -> PI -> SOME RECEIVER
if any one can provide me the screen shot for those SOAP / HTTP Sender or Receiver ADAPTER.
or Point me to Some article with Screenshots .
That would be appreciated with Point.
Regards
PS.

Solved . .

How many times does the JDBC sender adapter retry ?

Hi All,
How many times does the JDBC sender adapter retry in the ' Retry Interval' specified .
I know that it retries after the time specified in the ' retry interval' , but if it again fails after the first retry will it retry again and again .And while doing it will it block the next Select query which should get executed.
Thanks & Regards,
Rahul

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

How to configure the file adaptor so as to send an sample XML message.

Hi all ,
I had done the configuration and now i want to test the scenario but i dont now how to do that ?.
how to configure the file adaptor so as to send an sample XML message to the integration server ?.
I am totally new to XI.
please help me out how to do it.
its an urgent.
Thanks,
shuja

Hi,
I think you should post your question Process Integration (PI) & SOA Middleware.
Regards
Message was edited by:
Shehryar Khan

Clarification for HTTP and HTTPS Sender Adapter

Hello together,
after some investigating concering scenarios with HTTP and HTTPS sender there are still some points that are not absolutely clear for me.
I know that it is not necessary to configure an HTTP sender communication channel. However if I want to enforce HTTPS sender communication I think I need to add an HTTP sender communication channel with security settings enabled as well as a sender agreement.
To my understanding these settings are activated on the Adapter Engine (Java Stack), HTTP requests however call the ABAP stack directly. How does this work exactly?
Thank you very much for your additional explanation.

Hi,
see below is the format for HTTP URL
http://<hostname:port>/<path>?<query-string>
now query straing can only have values as given in the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
a way around can be to specify the payload for &party or &agency or &schema(if you are not using them) but then XI should be able to identify them correctly(which i m not sure how it will do),secondly the length can be a constraint coz if you add the whole payload ,the URL will become really long.
so i would suggest you not to use it but if you really have to,then explore it properly first and then only use
plz reward points
thnq

How to cofigure the JDBC Sender adaptor

how to cofigure the JDBC Sender adaptor,
i want to do the scenario JDBC>XI>SAP
Thanks & Regards,
priya reddy

HI
Database (JDBC) Adapter
The JDBC Adapter allows access to any DB that allows a JDBC driver to access the DB. This driver is not supplied with the adapter but must come from the DB provider or a 3rd party. The adapter converts database content to XML and vice versa.
Database content can be read with any SQL statement using a special XML format. This format enables SQL INSERT, UPDATE, SELECT, DELETE or even stored procedures. A message is always processed in one database transaction.
Refer the following links for further assistance
JDBC ADAPTER:
http://help.sap.com/saphelp_nw2004s/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm
Use thes step by step guidese
https://wiki.sdn.sap.com/wiki/display/XI/JDBCTOJDBC
https://wiki.sdn.sap.com/wiki/display/XI/XMLFile2XMLFile
tutorial /people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm for sender side JDBC configuration.
Follow this link
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
cheers
reward points if found useful

HTTPs sender adapter to pick file from a external HTTP file location

HI gurus
Please see the problem here. I need know hoe to configure the Sender HTTP adapter.
My Scenario-
A Flat file (non-xml but structured) sitting on an external https enabled web server. I need XI to go out and get this file on a regular basis (which will then be processed laterby the business person)
Thanks
VL

Hi,
The FTP Adapter will do the job for you. Just create a File Communication Channel and change Transport Protocol to FTP. Since you mentioned that the file is non-xml, in the Message Protocol, choose, File Content Conversion.
Here are some blogs that will help you:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
FYI.. HTTP Sender adapter is not required to be configured because a HTTP request will directly come to the ABAP Engine
Regards,
Balaji.M

How to configure the email in SAP

Hi Experts,
Can you please let me know how to configure the email in the server?
Thanks in Advance
Regards,
Kuldeep Verma

Hello Indu Rayepudi ..
I have followed the Recommendations and everything is going well but I can only send emails from the same domain, how can I set up to send to hotmail, gmail, yahoo?
Mi sap es SAP ECC 6.0
The administrator said that the Exchange server already has registered the server's ip sap to enable him to relay this IP.
But nothing happens.
Do you have any idea? any help from you, I would greatly appreciate .. Gina
Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
Edited by: GCH on Sep 25, 2008 11:24 PM

HTTP sender adapter and receiver adapter

Hi guys,
I have a scenario that I have to communicate with an HTTP server with XML over HTTP.
When the communication is opened by me I will use an HTTP receiver adapter and give the connection parameters.
a) Do I have to use a different HTTP receiver communication channel for each different type of XML that I want to send??
b) When the communication is opened from the HTTP server, they have to type the URL in order to invoke the correct scenario on my side, right? I know that I do not have to use an HTTP sender adapter. They have to call the http URL, followed by the sender business system, sender interface name/namespace etc.
That means that the URL in the format: http://XIhostname:port/ is not enough right?
Is there a way to figure out from the type of the XML sent which scenario will be executed in XI?
Because it is difficult for them to use different URL when they are sending me different type of XML's, i.e. different requests.
Evaggelos

>>Do I have to use a different HTTP receiver communication channel for each different type of XML that I want to send??
Yes,receiver adapter is linked to receiver agreement,if you have different inbound interfaces then it means you need to have diferrent receiver agreement,hence different receiver communication channels.
>>That means that the URL in the format: http://XIhostname:port/ is not enough right?
No,its not,there is a test tool on SDN called "HTTP test tool".just search for that and download on your desktop,it will help you generate the correct URL as well as test the scenario by sending sample HTTP request.
One thing you need to keep in mind is that HTTP scenarios don't require and sender communication channel or sender agreement.they only need configurations on receiver side
Thanx
Aamir
FYI:Here is the test tool
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Edited by: Aamir Suhail on Jul 3, 2008 12:18 PM

How to configure the Http sender adapter

Similar Messages

Maybe you are looking for