How to Configure Transport MAnagement system in CHARM

Hi
How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
Can any one tell me the detailed process? If you have any Configuration document please share it to me
Points will awarded for helpful answer
Thanks
Bhaskar

In a two system landscape is it necessary to make development the domain controller always?
No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
This is not recommended.
Regards,
Ashutosh

Similar Messages

Transport Management System Configuration

Hi,
I have a question here, on Transport Management System.
We have new 64 bit boxes. I first migrated our dev SCM 4.0 box from 32 bit to 64 bit, it asked for being a Domain Controller. Configured it as a Domain Controller, and continued with the upgrade and completed the upgrade.
Now, I am going to the second box (QAS). I have performed the migration from 32 bit to 64 bit. Now, when I login to this box, in my understanding, TMS should offer to make this system part of the already existing domain right? It doesn't happen that way. It is forming itself again as a domain controller. After some changes and update configurations on both the boxes, the QAS box now says, "Waiting to be added into the domain by the domain controller" something similar to this. But, when I go and login to the domain controller (DEV), it doesn't show anything there.
In the QAS system when I go to the System Overview, I see both the systems but, they both show under the two different transport groups. I am totally confused here. Am I doing something wrong here? The only problem I see here is, the domain controller (DEV) is on SCM 5.0 as it is already upgraded from SCM 4.0 but the QAS is still in SCM 4.0 and waiting to be upgraded. Do you think this could be a potential problem? If so, what is the solution to continue with the upgrade because, I am sure the upgrade won't work without the Transport Management System configured properly.
Please help.
Thank you.

Hi Gus,
Thank you for the prompt response. Thank you.
There are couple of things to be considered before following your suggestion.
1. Our QAS box is in Kernel 6.40 (32 bit) and my DEV (upgraded) is in Kernel 7.00 (64 bit). In this kind of heterogeneous environment, I am sure the R3trans versions should be different. Is it possible to configure the transport management using the shared transport directory (Transport Group)?
2. Now, when I login to the QAS box, as I said in my previous message, I see two entries. One it should the APD (Domain Controller) with a different transport group. And I see the APQ in a different transport group. The problem here is, I cannot edit or delete any of the entries in the APQ - STMS because, it keeps saying all changes could be made only in the domain controller. A point to be noted here is, even though it shows two different transport group, it points to the same transport domain 'DOMAIN_APD'. Another thing to be noted here is when I look at the domain controller (APD), I don't see an entry for APQ or any awaiting approval requests.
Kindly suggest what needs to be done here.
Thank you.

Change Request Management without Transport Managment System

Hello,
we would like to use the Change Request Management but without using the Transport Managment System (TMS). Means, we do not want that transport request are created automatically, we do not want that it is possible to log on to the satellite systems via the Solution Manager and we do not want to integrate the transport track into the Solution Manager.
What effort do we have to estimate for such a change? Does anybody already use a process like this? We would be grateful for any idea or solution.
Many thanks in advance.
Jenny

Hi Jenny,
you can do this with the following activities in your custom Business Transaction (BT):
- remove un-useful actions from your action list (TA: CRMC_ACTION_CONF)
- remove the action from the actions depending on user status (TA: starting from SPRO)
- unlock the switches from your SMI Project CTS Switches (TA: SOLAR_PROJECT_ADMIN)
The effort, for copying a standard BT and remove the actions and testing it, is about 5 days, if you already know how to customize a ChaRM BT... last but not least if one of the standard flows is what you really need.
Please let me know if you need more details, otherwise please reward the forum points
Regards ,
Giampaolo

Central transport management system

Hi All,
How do i configure central transport management system within Solution Manager to find out if transports within different environments can be controlled from single system.
Regards
Suresh

Hi:
You first need to have every SAP system already configured into Solution Manager in a Solution Landscape whereas, to configure the central TMS to handle all the T.O you need to configure the Change Management feature in Solution Manager.
Additional information and also the installation and configuration guides are located under http://service.sap.com/solutionmanager
Hope this helps!
Best Regards,
Federico G. Babelis
http://www.gazum.com

System RQ1 is unknown in the Transport Management System

<b>Hi
Please assist I am getting this screen dumbs on st22 about my TMS running this function "TMS_CI_CHECK_ACCESSTOKEN". the problem is that my RP2 is checking RQ1 which is no longer on my systems land it is now replaced by RQ2.
below is the error and suggested procedure but it's not working.
Please provide any suggestions.
</b>
Diagnosis
An error occurred in the TMS communication layer.
System: RP2.DOMAIN_RD2(000)
Function: TMS_CI_CHECK_ACCESSTOKEN
Error: UNKNOWN_SYSTEM (RQ1)
System Response
The function terminates.
Procedure
Log this system on to the Transport Management System.
If this error occurs in the function TMS_CI_CHECK_ACCESSTOKEN, then the TMS configuration was deleted in the R/3 System RP2.DOMAIN_RD2(000).

So, just in case someone need more feedback, the help on error message is::
System XYZ is unknown in the system landscape
Message no. AI_SOLAR11080
Procedure
Create system XYZ in the System Landscape transaction .
- the system is created in SMSY.
Generate RFC destinations from the local system into the system XYZ in the Clients tab in the transaction Setup System Landscapes.
- RFC destinations generated (and tested successfuly) but not in SMSY_SETUP. This tx is named "System Landscape Maint. Settings" in SAP Easy Access, but once entered, it has a "Setup System Landscapes - SAP Solution Manager" title. However, this tx is dedicated to define an Automatic Data Transfer type:
TMS/ RFC (this one is my case), or
SLD
So, the RFC's are generated in SMSY also, well - some of them. I used SM59 and SMT1 and SMT2 to finish it propertly.
Alternatively, you can assign an existing system to the logical components, in the System Landscape/Systems tab in the Project Administration.
+- The (existing) system is assigned to the logical components, it can be seen on "System Lanscape - System" tab in SOLAR_PROJECT_ADMIN
However, when I try the "System Lanscape Check" button in the same transaction, I get this very message as well...+
You can suppress this message by putting the system in the exception table in the Plug-In List, but you should only do so in exceptional circumstances.
I am not quite sure how this could be a solution to my problem. I suppose it would just suppress the message, and not solve the problem...
Now, what confuses me is that I have done it once with no problem with other system in this very project, and now I can't find a solution...
Any help is highly apreciated.
Thank you in advance,
Nenad

Transport Management System with Solution Manager

Dear all,
Do you know the function transport management system(TMS) with solution manager, I already search in SAP document but not found this function.
Do you know how to config solution manager for TMS and documents related with this function please guide for me!
Thanks all very much !

Hi,
Check this link.
https://websmp103.sap-ag.de/~sapdownload/011000358700000508502008E/ChangeRequestManagement.pdf
Hope this answers your questions.
Feel free to revert back.
-=-Ragu

All Information regarding Change and Transport management System in SAP

Hello Experts,
Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc. I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
Useful answers shall be rewarded points.
Thanks and Regards,
Somya

check this link
http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

Setting up of Transports Management System in EP7.0

Hi Experts!!!!!
Can you please provide the documents or links for configuring the transport management system for EP 7.0 Systems.
Regards,
Vamshi.

Vamshi,
These could be helpful.
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
Reward points for handy posts!
Cheers,
Sandeep

Transport management system in ABAP

Hello Abappers,
Could you please provide me with the guided procedure of how the transport management system in ABAP works?
Please explain it in detail.
Points will be rewarded for relevant answers.
Regards,
Mansi.

Hi,
Try these links...
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTSTMS/BCCTSTMS.pdf
http://www.bayerbbs.de/fileadmin/user_upload/bbs_internet/pdf/brochures/Einkauf/TM3%20Broschre_en.pdf
Do Reward points if useful....
Regards
AK

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

How to configure Sun Java System Application Server Enterprise Edition 8.1

hi all,
How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
I have installed jes for my windows system.. so that i have removed platform version of Application Server..
I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
but i couldn't;

Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.

How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

Please follow below technet article :
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
Installing and Configuring Workflow Manager 1.0 (Step by Step)
Note: The steps in this article apply to SharePoint Server 2013.
The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

How to configure Enterprise Manager in Active Data Guard?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
Question: How to configure Enterprise Manager in Active Data Guard?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

R/3 transport management system

Hi experts,
can anyone explain about R/3 transport management system and reviewing them in test and production system.if any docs.........plz give me the link.

Hi Samanvi,
check the below links may be useful for you....
Re: Transport Management System (TMS) of R/3
transport management system
documents of Transport system
~~Guduri

Problems with Transport Management System

Hi All,
i seem to be having some issues with my Transport Management System, we have a two system landscape DEV & PRD, the operating system is windows 2003 server. i am trying to access the usr/sap/trans on the transport host (DEV) from the PRD system, i have put patches on the DEV server, but i can't access these patches from the PRD server. I have also tried to release a test transport, but the queues are not being updated. the systems are in the same Domain and the same transport group. on the PRD server i have specified the following value for the DIR_TRANS =
DEVSERVER\sapmnt\trans. i have checked the files and they are shared, what could be the cause of this?

Can you please check the access of global TRANS directory from your PRD server. Login to your PRD server, goto transaction STMS --> Overview --> Systems. Select your developement system and goto SAP System --> Check --> Transport Directory. If it can access the global directory the tick marks will come otherwise there is some problem with the directory access.
Regards,
Abhishek Jain

How to Configure Transport MAnagement system in CHARM

Similar Messages

Maybe you are looking for