How to connect from Oracle 9i database on windows to sap database (orcle 8)

Hi,
I really need expert advice from anyone..I wud like to connect my Oracle 9i database running on windows platforms to SAP database (oracle 8) running on Unix platform.
Is there any special code to establish the connectivity...or we can simply use the ORacle net services(tnsnames.ora) file to connect to the SAP database??
I wud really appreciate any expert comments on this.
Thank you
Ratheesh

Hi Ratheesh
If you are able to create an ODBC connection from the Windows Oracle server to the SAP database then you can use Oracle Heterogeneous Services to query the SAP database from Oracle through a DB link. To configure Heterogeneous Services is quite easy. You put an entry into the SID_LIST_LISTENER part of the listener.ora file:
(sid_desc=
      (sid_name=hsql)
      (oracle_home=C:\oracle\ora92)
      (program=hsodbc)
    ) Then create an entry in your tnsnames.ora file to connect to your new listener service:
apmacnew =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = tcp)(HOST = cntrra20-lab20)(PORT = 1527))
    (CONNECT_DATA =
      (Service_name = apmacnew)
    (HS = ok)
)And lastly create a database link using the tnsnames entry.

Similar Messages

How to connect from Oracle 11g to SQL Server 2008 R2

Hi,
Is it possible to connect from Oracle 11g on AIX to SQL Server 2008 R2? If so, what is the preferred method?
SQL Server has the original table. From Oracle 11g, we want to access data which is in SQL Server real time.
Thank You
Sarayu

Hi,
Have a look at these Oracle notes for the full information on the gateways -
Master Note for Oracle Gateway Products (Doc ID 1083703.1)
Functional Differences Between DG4ODBC and Specific Database Gateways (Doc ID 252364.1)
Gateway and Generic Connectivity Licensing Considerations (Doc ID 232482.1)
How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris, AIX,HP-UX) (Doc ID 562509.1)
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install (Doc ID 561033.1)
The Database Gateway for SQL*Server (DG4MSQL) needs a separate license but the Database Gateway for ODBC (DG4ODBC) is included in your RDBMS license. You only need to provide the third party ODBC driver needed by DG4ODBC.
Regards,
Mike

How to connect from Oracle to SQL Server Database?

I want to connect to SQL Serv DB via Oracle 10g can anyone assist please?

Hi,
you should post this question in the database forum (General Database Discussions - this is specially for the Oracle Warehouse Builder.
Regards,
Detlef

How to connect from oracle sql developer ?

I've made one java class, to access UserRecord Data Base from sql developer.
My class file is :-
import java.sql.*;
import java.io.*;
public class SelectData{
public SelectData(){}
public void selectData(){
          String url="jdbc:oracle:thin:@10.1.236.10:1521:dev92i";//connection url
     Connection con= null; //connection create
          Statement stat = null; //prepared statement create
          ResultSet rs=null; //result set to hold result
          try{
          Class.forName("oracle.jdbc.driver.OracleDriver");
          con = DriverManager.getConnection(url,"scott","tiger");
          stat = con.createStatement();
          rs = stat.executeQuery("select Name from UserRecord");
          while (rs.next()) {               // Position the cursor
                    // Retrieve the first column value
                    System.err.println("Name= " +rs.getString("Name"));
                    // Retrieve the first column value
                    System.err.println("Pswd= " +rs.getString("Password"));
          rs.close();
          catch(SQLException e){
               System.err.println(e.getMessage());
          catch(ClassNotFoundException e){
               System.err.println(e.getMessage());
          catch(Exception e){
               System.err.println(e.getMessage());
          finally{
                    try{
                    if(con!=null)
                         con.close();
                    catch(Exception e){
                         System.err.println(e.getMessage());
public static void main(String args[]){
     SelectData sd=new SelectData();
     sd.selectData();
When i run this class file it gives error :-
"oracle.jdbc.driver.OracleDriver"
Plz help me out from this problem and suggest any configuration if required in oracle sql developer to run my programs.

{color:#0000ff}hi,
add the jar for oracle jdbc to the libraries.
if you are using any IDE then just change the project properties adding the jar file.
if not edit the classpath of the envoirnment variables.
{color}{color:#ff0000}*manik*{color}

How to connect to Oracle database from webdynprojava application

Hi
How to connect to Oracle database from webdynprojava application. where can we provide the code to connect to database.?
Thank You.

Hi,
You need to create Java Bean model. The bean is a typical java bean with default constructor, getter and setter. You can have additional methods for query etc. The attributes in the class will be your model node and attributes.
However you need to configure the connection and create JNDI using visual administrator before writing the code.
You can also consider writing Session EJB with oracle and using them in WD.
http://help.sap.com/saphelp_nwce10/helpdata/en/45/dcaa4f05535591e10000000a1553f7/frameset.htm
Srini

How to connect to oracle ebs from an external software

Hi!
I want to develop an integration for oracle EBS. Therefor I'm looking for ways how to connect to the EBS and for a repository of functions which can be called from an external program. I'm not quite sure if this is the right place to ask but I could not find anything yet so I'm trying here.
Are there any standard connectors for the EBS provided by Oracle?
Thanks,
Konrad

Oracle Applications Architecture is a framework for multi-tiered, distributed computing that supports Oracle Applications products. In this model, various servers are distributed among multiple levels/tiers as follows:
- The Desktop Tier --> Web browser with Jinitiator or Sun JRE
- The Application Tier --> Web, Forms, Reports, Admin, and Concurrent servers
- The Database Tier --> Oracle Enterprise Edition Database
The Application tier is the layer which is responsible for:
- Hosting the various servers that process the business logic
- Managing communication between the desktop tier and the database tier
So, in order to connect to the database, you can either access the application tier, or connect directly to the database. I do not think it is possible to communicate with the application services from some other application. Therefore, you would need to connect to the database directly which can be achieved as explained in my previous reply. There is no such API which can be used to open/close a database connection. Oracle E-Business Suite is just a database with number of schemas and objects which are tightly integrated.
More details about Oracle E-Business Architecture can be found in:
Oracle Applications Concepts
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/11iconcepts.pdf

Can Oracle 7i and 8i be connected from Oracle 9i database

I want to know if i can do the following. That means is it possible in production scenario. If yes then how and will it affect the performance to a great extend.
We are now upgrading the application server to weblogic 10.3 . But this server supports only Oracle 9i and above. But we have two more data server which are Oracle 8i and Oracle 7i. These databases will be upgraded later on but not now. So the problem is i can not connect to these Oracle database versions if i use Weblogic 10.3. So i wanted to know if there is any possibility of connecting the application server to a intermideate Oracle 9i database which will act as a bridge from Application server to Oracle 7i and 8i. Can Oracle 9i connect to Oracle 7i and 8i. If yes then how. You can provide me online references if any.
Thanks in advance. Waiting for your reply.

manoj.tcs wrote:
The connection what you are refering is from a normal pc to Oracle 7i or 8i database. But i want to connect from Oracle 9i to Oracle 8iWhen connecting from one db to another (via a db_link) the 'calling' db is just another client to the 'called' db. if you can connect to 7.x (there was no 7i) with a 9.x sqlplus, then you should be able to connect with a 9.x database. At a previous job, we did something similar to get an app compiled against 8.1 to use a 10.2 database - set up a 9.2 intermediary that had nothing but db_links and synonyms pointing on to the 10g.
However, I wouldn't bet the company on making your scenario work. You really should upgrade your databases first.

How to connect to Oracle 11gR2 from CF9

Hi,
how to connect to Oracle 11gR2 64 bit Database from CF9?
In CF Administrator no Oracle Driver is available.
Do I have to install Oracle Client Software on Server Hardware where CF9 Server is installed?
If yes, is Oracle Instant Client is enough or do I have to install full oracle client?
Any idea?
regards Claudia

Excellent, glad to hear it's sorted. Just be careful if you use any of the "advanced" features such as returning querysets from stored procedures or BLOBs, apparently there are differences between the JDBC and full DataDirect drivers in those cases.
However in 99% of cases you won't notice the difference.

How to connect from VC++ 6.0 to Oracle 8i

Can anybody tell me how to connect from
VC++ 6.0 to Oracle 8i which is installed
in server (without installing in client)

Whats the problem you are facing, from what I see its pretty straight forward. Edit the system object, from 'Show Category' drop down select Internet Transaction Server, hit the modify button at the extreme right and your good to go.
Thanks,
GLM

How to connect from java without using oracle client installation

hi ,
Please tell me how to connect from java without using oracle client
Thanks & Regars

http://www.orafaq.com/wiki/JDBC#Thin_driver

How to Select from Oracle 8i database and insert into Sql Server 2005 datab

Hi how to Select from Oracle 8i and insert into Sql Server 2005.
Source db as Oracle 8i
Target db as Sql Server 2005.
I need to select one table data from Oracle 8i & insert into Sql Server 2005
Thanks

Thanks Khan..
Is there is any query (OPENQUERY) available for that?
Regards..

Connecting from Oracle to SQL Server

Hi
I am now tring to connect from oracle to sql server using database link.
Created database link
but when connecting to remote db getting the floowing error
select * from region@mysqlserverdsn
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLSERVERDSN
Can anyone help
My Listener File
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc1)
(SID_DESC =
(GLOBAL_DBNAME = ORCL.DOMAIN.COM)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = orcl)
(SID_DESC =
(GLOBAL_DBNAME = NORTHWIND.DOMAIN.COM)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = MYSQLSERVERDSN)
(PROGRAM=hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = SALIHKM.DOMAIN.COM)(PORT = 1522))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
My Tnsnames Entry
MYSQLSERVERDSN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=1522))
(CONNECT_DATA=(SID=MYSQLSERVERDSN))
(HS=OK)
Lsnrctl is working fine.
c:\>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2006 18:53
:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 18-MAY-2006 18:53:16
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
Services Summary...
Service "NORTHWIND.DOMAIN.COM" has 1 instance(s).
Instance "MYSQLSERVERDSN", status UNKNOWN, has 1 handler(s) for this service..
Service "ORCL.DOMAIN.COM" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
But Tnsping show no listener
C:\>tnsping MYSQLSERVERDSN
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2
006 18:56:27
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(P
ORT=1522)) (CONNECT_DATA=(SID=MYSQLSERVERDSN)) (HS=OK))
TNS-12541: TNS:no listener
Services
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2006 19:00
:04
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
Services Summary...
Service "NORTHWIND.DOMAIN.COM" has 1 instance(s).
Instance "MYSQLSERVERDSN", status UNKNOWN, has 1 handler(s) for this service..
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "ORCL.DOMAIN.COM" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: SALIHKM, pid: 2080>
(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(PORT=1070))
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I am very much confused with this situation.
Thanks & Regards
Salih Km

Hi ,
Thanks for your reply.
Contents of my initMYSQLSERVERDSN.ora file is
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLSERVERDSN
HS_FDS_TRACE_LEVEL = 0
HS_FDS_TRACE_FILE_NAME = hsmsql.trc
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
set ODBCINI=c:\WINDOWS\ODBC.INI
SALIHKM.DOMAIN.COM is my system in which Oracle Test DB is Installed.
SQL Server is in another location.
In Tnsnames i specified ip address.
One more doubt.
I am using 10g Release 2 demo version.
whether it will support Hetrogeneous Services?
How to know whether a database supports HS or not?
Thanks & Regards
Salih Km

ORA-28500: connection from ORACLE to a non-Oracle system returned

Hi All,
My database is in 10.2.0.4 and has a dblink to sqlserver. The dblink works fine for normal queries.
However when executing the following query from my oracle database
SELECT ROWNUM, "ad2_id", my_name, "data"
FROM "abc"@xyz.com
WHERE "startDateTime" > (TO_DATE ('20100120', 'YYYYMMDD') - 1)
AND "startDateTime" < TO_DATE ('20100120', 'YYYYMMDD')
AND ROWNUM < 101
I am getting the following error
Note : Line 8 is "startDateTime" > (TO_DATE ('20100120', 'YYYYMMDD') - 1)
ERROR at line 8:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from xyz
Note:
1.data is of datatype VARCHARN(1000) and if we ignore that field I am able to get the output
2. If I give the StartDateTime to a value without using to_date I am able to get the output.
Could you please tell me what could be the problem ?
Thanks in advance.

user12061473 wrote:
If the edit masks doesn't match how come I am able to get output for the below query
SELECT ROWNUM, "ad2_id", my_name, "data"
FROM "abc"@xyz.com
WHERE "startDateTime" < TO_DATE ('20100120', 'YYYYMMDD')
AND ROWNUM < 101
The problem as far as I am know is if I try to select data and use both the where clauses I am getting the error.
Which is
SELECT ROWNUM, "ad2_id", my_name, "data"
FROM "abc"@xyz.com
WHERE "startDateTime" > (TO_DATE ('20100120', 'YYYYMMDD') - 1)
AND "startDateTime" < TO_DATE ('20100120', 'YYYYMMDD')
AND ROWNUM < 101
Error
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from xyzThat's a different error. The error you posted above was
"ORA-01861:literal does not match format string"which my posts addressed.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from xyzis an entirely different message, related not to date formats but what looks like a distributed query. Unfortunately I am getting
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later. when I look up ORA-28500 and ORA-02063 in the on-line documentation right now :(
Is your database connect string correct? The ones I use don't have .com attached to them.

ORA-28500: connection from ORACLE to a non-Oracle system returned this mess

Hi,
I scheduled a job .. got this error what could be the reason ?
*** 2011-09-27 05:00:21.239
*** SESSION ID:(273.6080) 2011-09-27 05:00:21.239
*** CLIENT ID:([email protected]@Mozilla/4.0 (compatible; MSIE 8.0; Windows) 2011-09-27 05:00:21.239
*** SERVICE NAME:(SYS$USERS) 2011-09-27 05:00:21.239
*** MODULE NAME:(DBMS_SCHEDULER) 2011-09-27 05:00:21.239
*** ACTION NAME:(XXINSERTKEY) 2011-09-27 05:00:21.239
ORA-12012: error on auto execute of job 3311903
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. {08001,NativeErr = 17}[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). {01000,NativeErr = 53}
ORA-02063: preceding 2 lines from VISABG
ORA-06512: at "APPS.XXDMIG_INSERT", line 3
Thanks
Vishwa

ORA-12012: error on auto execute of job 3311903
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. {08001,NativeErr = 17}[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). {01000,NativeErr = 53}
ORA-02063: preceding 2 lines from VISABG
ORA-06512: at "APPS.XXDMIG_INSERT", line 3Search MOS website for ORA-28500 and go through the docs!
Ora-28500 with Ms Sqlserver - Not associated with a trusted SQL Server connection [ID 333775.1]
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit to Connect to Non-Oracle Databases Post Install [ID 466225.1]
Select From Non-Oracle Database Using Dg4odbc Returns Ora-28500 From Sqlplus [ID 1254254.1]
ORA-28500: Login failed via Transparent Gateway when Connect to SQL Server 2000 on WinXP [ID 1165743.1]
Error Ora-28500 and Sqlstate I Issuing Selects From a Unicode Oracle RDBMS With Dg4odbc To Mysql or SQL*Server [ID 756186.1]
Thanks,
Hussein

Using Oracle Generic Connectivity to connect from Oracle to Microsoft Acces

I am trying to connect from Oracle to Access using ODBC. I followed the steps described in oracle documentation but was not sucessful. Could you plase take a look at my code let me know where I went wrong. It is as follows :
1)Created an ODBC connection for Microsoft Access called 'MSACCESS' (System DSN). And associated accdb1.mdb to this ODBC connection.
2)Created a table called orders in accdb1.mdb.
3)Added the foll lines in tnsnames.ora
accdb1 =
(DESCRIPTION=
(ADDRESS=
               (PROTOCOL=tcp)
               (HOST=kdandapani.170systems.com)
               (PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=accdb1)
(HS=OK)
4)added the following lines in listner.ora :
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=accdb1)
(ORACLE_HOME=c:\orasrv)
(PROGRAM=accdb1)
5) Copied inithsodbc.ora to iniths_accdb1.ora in the ORACLE_HOME/hs/admin directory. Added the following line there :
HS_FDS_CONNECT_INFO = MSACCESS
6)Created the foll dblink :
create database link access1
using 'accdb1';
7)tried to access table ORDERS in the MSACCESS database with the foll SQL -
select * from orders@access1;
Resulted in the foll error message
ERROR at line 1:
ORA-12154: TNS:could not resolve service name

hi,
I am new to Generic Connectivity i have just followed all the steps you wrote once in this forum but i m getting the following error :
SQL> SELECT * FROM LOGIN@MSACCESS;
SELECT * FROM LOGIN@MSACCESS
ERROR at line 1:
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from MSACCESS
Following are the steps you suggested in this forum :
1)Created an ODBC connection for Microsoft Access called 'MSACCESS'. And associated accdb1.mdb to this ODBC connection.
2)Created a table called ORDERS in accdb1.mdb.
3)Added the foll lines in tnsnames.ora
MSACCESS.170SYSTEMS.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = kdandapani.170systems.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MSACCESS)
(HS = OK)
4)This is how the listner.ora looks after I added SID_NAME=MSACCESS :
# LISTENER.ORA Network Configuration File: c:\orasrv\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = kdandapani)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORALOCAL)
(ORACLE_HOME = c:\orasrv)
(SID_NAME = ORALOCAL)
(SID_DESC =
(PROGRAM = extproc)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = c:\orasrv)
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = MSACCESS)
(ORACLE_HOME = c:\orasrv)
5) Copied inithsodbc.ora to iniths_MSACCESS.ora in the ORACLE_HOME/hs/admin directory. Added the following line there :
HS_FDS_CONNECT_INFO = MSACCESS
6)Created the foll dblink :
create database link MSACCESS
using 'MSACCESS';
7)tried to access table ORDERS in the MSACCESS database with the foll SQL -
select * from orders@MSACCESS;
I have used my login table instead of orders. But i got an error that i have stated earlier.
Can you please help me ? if possible than please forward your reply to : [email protected]
-thank you man,
-imran

How to connect from Oracle 9i database on windows to sap database (orcle 8)

Similar Messages

Maybe you are looking for