SAP- JDBC(synch)- SAP scenario

Hi All,
I have a requirement in which user runs Report in SAP which initiates a PI scenario. This PI scenario runs a select query on external Oracle database and returns the data back to SAP to display as the report output on screen. This report needs real time data.
How should be my approach to design the PI scenario?
Here on database side I can use JDBC receiver synchronous adaptor but on SAP side which channel should I use? Will proxies help? If yes then will it be server/client proxies?
Thanks in Advance.
Regards,
Atul

Hi Atul,
>Here on database side I can use JDBC receiver synchronous adaptor but on SAP side which channel should I use?
ABAP proxy or RFC support synchronous scenarios
>Will proxies help?
Yes
>If yes then will it be server/client proxies?
Client proxies
Regards,
Udo

Similar Messages

RFC to Jdbc Synch Scenario

Hi,
I have a scenario like RFC to JDBC synch scenario, so what would be the QOS for sending( RFC) communication channel and as well as JDBC communicaiton channel.
Thanks n Advance.,
Xeon

Hi,
Neither the Sender RFC adapter nir the Receiver JDBC adapter provide the option to select the QOS.
In your case if the report triggering the call to XI is making a Synch Call then the QOS in the SOAP header will be BE. If the Inbound Interface for the Receiver JDBC adapter is also a Synchronous Interface the QOS is taken as BE for the Receiver JDBC adapter.
You need not manually change the QOS anywhere as long as you are using Synch message interfaces.
Regards
Bhavesh

SAP Scenario Testing

I understand that SAP scenario are tested in Mercury software, any possible link or a website where i can find info on how to use mercury testing software for SAP

Hello,
Mercury is a software which is only used to record and execute your test scenarios. Mercury will not interact with SAP and test it automatically. The test steps should be defined in Mercury manually and the test results should also be recorded then you may be able to execute.
The test results, time, process areas ...etc can be tracked by this.
Prase

File - to - JDBC- to - File Scenario using Stored Procedure

Hi,
I want to do File - to - JDBC - to - File scenario, because I'm getting data in a file format and that data i want to load in a database. Database level i have a stored procedure. if any exceptions. my stored procedure will give the Response. so, now i want to store that resposne in a file..
for this. what are the steps we have to use. is this scenario will comes in Synch ronous or Asynchronous ? and I have searched the web blogs also. al the blogs are related to Http or Soap with JDBC . so, please give me some input help about this...
how many data types we have to create... any body having step step procedure for this...
regards
Jain

Hi,
You will need a BPM in your design as Sender File adapter does not support Synchronous messaging. Refer my answer in this thread (page 2) and have your design accordingly....instead of RFC you will have a file adapter as the ultimate receiver.
Re: BPM FILE--> JDBC--> RFC
Just take care of below things:
1) JDBC message format is as per the guidelines
[Message format for sending req to JDBC|http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm]
2) check for the format of your source and target file format (if it is a Flat-file with a xml structure that XI can parse then no need of FCC but if it is a CSV file then you will need FCC)
Regards,
Abhishek
Edited by: abhishek salvi on Apr 14, 2009 7:32 PM

Synch-asynch scenario without bpm's?

Synch-asynch scenario without bpmu2019s can any one help me how to configure this scenario without bpms?

hi ferocious,
That is possible with standard functions and standard module beans.
Possiable1:
From pi 7.1 v , sap provided standard functions like RFC and jdbc of the conversion function group.
Possiable2:
sap provided Standard module beans those are RequestResopnceBean and OnewayResponceBean.
thanks,
bhavanisankar.

Error while executing a JDBC to Idoc scenario : No standard agreement found

Hello SAP PI Gurus,
I am having a JDBC to idoc Scenario .And the interface is running at 10 min of duration.
<SAP:AdditionalText>No standard agreement found for ,
BS_EXT_CTBSREPDB, , BS_ERPQAS_QE1_320, http://XYZ.com/FI/FI_FI_01/Charges, FIDCC2</SAP:AdditionalText>.
While i test the configuration...i get an error in reciever agreement as mentioned above.
Can you pls help me in resolving this issue.
Regards,
Ravi

Hi,
I think the problem is with namespace....for IDOC the namespace will be "urn:sap-com:document:sap:idoc:messages"...but in your case it is different.....i.e http:....etc.....please check whether you 've used the same IDOC withe above mentioned namespace in all the configuration objects like interface determination, receiveragreement etc.....
Thanks
Priyanka

IDoc to JDBC and JDBC to IDoc Scenario

Dear All,
I am working on IDoc to JDBC and JDBC to IDoc Scenario.
I have to send Idoc from SAP to Non SAP system(.NET application) i almost configured in XI but still i don't know when my INTEGRATION will INVOKE how my data will proceed from IDOC to Oracle database(Through JDBC) and in case of revese how and when Data flow will start.
Does anyone have completed STEP by STEP scenario document for this?
How my Idoc will sent to XI?
How XI will pick up data from IDoc?
How XI will Convert data to JDBC and UPDATE in Oracle Database?
And i reverse case(JDBC to IDoc) when my INTEGRATION will INVOKE?
Where and When i can watch my process and data?
How can i test the whole integration?
I AM GETTING ERROR WHILE TESTING CONFIGURATION IN Integration Directory "Error while refreshing the XI runtime cache" and when i check this in SXI_CACHE it gives me error
"Unable to refresh cache "NO_BUSINESS_SYSTEM"
"Error during last refresh to cache"LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
Please solve all the above problems i will reward u points
thanks,
RP

Hi,
While we working on IDOC to JDBC interface..
We have to deploy JDBC Drivers?
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Idoc Reveiver adapter..
http://help.sap.com/saphelp_erp2004/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Thanks,
Satya Kumar
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Edited by: SATYA KUMAR AKKARABOYANA on May 8, 2008 5:51 PM

JDBC to Mail scenario with XSLT mapping

Hi all,
I am working on JDBC to Mail scenario. We have to pick the data from Oracle system and mail has to be sent with an attached Excel file.
I am doing this scenario by using of following blog.
eMail Report as Attachment (Excel/Word)
I am getting the output as an attachment but iam not getting the data.
the same xslt coding iam using which has given in blog.
any idea........
Thanks,
Sreedhar Goud.

Hi Gaurav,
JDBC is picking the data.In SXMB_MONI outbound payload iam able to see the data but in inbound payload there is no data.i think the problem is in XSLT code only.
My source structure:
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_ORMS_Errors xmlns:ns="http://mg.adityabirla.com/mg/orms/mail">
    <row>
        <INTERFACE_NAME>MG_SAP_RMS_ITEM_PKG</INTERFACE_NAME>
        <RECORD_DETAIL>Item</RECORD_DETAIL>
        <ERROR>item</ERROR>
        <CREATE_DATE>2008-11-03 00:00:00.0</CREATE_DATE>
        <MAIL_SENT>N</MAIL_SENT>
    </row>
</ns:MT_ORMS_Errors>
XSLT code:
<?xml version='1.0'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:variable name="break"><br></xsl:variable>
<xsl:variable name="tableB"><table></xsl:variable>
<xsl:variable name="tableE"></table></xsl:variable>
<xsl:variable name="trB"><tr></xsl:variable>
<xsl:variable name="trE"></tr></xsl:variable>
<xsl:variable name="tdB"><td></xsl:variable>
<xsl:variable name="tdE"></td></xsl:variable>
<xsl:variable name="nbsp">&nbsp;</xsl:variable>
<xsl:variable name="thB"><tr BGCOLOR="#CCCC99"></xsl:variable>
<xsl:template match="/">
   <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
    <Subject>Deliveries from XI</Subject>
    <From></From>
    <To></To>
    <Content_Type>application/vnd.ms-excel</Content_Type>
    <Content>
     <xsl:text xsl:space="preserve">These deliveries has been completed:</xsl:text>
     <xsl:value-of select="$break"/>
     <xsl:value-of select="$break"/>
     <xsl:value-of select="$tableB"/>
     <xsl:value-of select="$thB"/>
     <xsl:value-of select="$tdB"/>
     <xsl:text xsl:space="preserve">INTERFACE_NAME</xsl:text>
     <xsl:value-of select="$nbsp"/>
     <xsl:value-of select="$tdE"/>
     <xsl:value-of select="$tdB"/>
     <xsl:text xsl:space="preserve">RECORD_DETAIL</xsl:text>
     <xsl:value-of select="$nbsp"/>
     <xsl:value-of select="$tdE"/>
     <xsl:value-of select="$tdB"/>
     <xsl:text xsl:space="preserve">ERROR</xsl:text>
     <xsl:value-of select="$nbsp"/>
     <xsl:value-of select="$tdE"/>
     <xsl:value-of select="$tdB"/>
     <xsl:text xsl:space="preserve">CREATE_DATE</xsl:text>
     <xsl:value-of select="$nbsp"/>
     <xsl:value-of select="$tdE"/>
     <xsl:value-of select="$trE"/>
    <xsl:for-each select="MT_ORMS_Errors/row">
      <xsl:value-of select="$trB"/>
      <xsl:value-of select="$tdB"/>
      <xsl:value-of select="INTERFACE_NAME"/>
      <xsl:value-of select="$nbsp"/>
      <xsl:value-of select="$tdE"/>
      <xsl:value-of select="$tdB"/>
      <xsl:value-of select="RECORD_DETAIL"/>
      <xsl:value-of select="$nbsp"/>
      <xsl:value-of select="$tdE"/>
      <xsl:value-of select="$tdB"/>
      <xsl:value-of select="ERROR"/>
      <xsl:value-of select="$nbsp"/>
      <xsl:value-of select="$tdE"/>
      <xsl:value-of select="$tdB"/>
      <xsl:value-of select="CREATE_DATE"/>
      <xsl:value-of select="$nbsp"/>
      <xsl:value-of select="$tdE"/>
      <xsl:value-of select="$trE"/>
     </xsl:for-each>
     <xsl:value-of select="$tableE"/>
    </Content>
   </ns1:Mail>
</xsl:template>
</xsl:stylesheet>
Thanks,
Sreedhar Goud.

JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
Kumar

HI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla..

JDBC to IDOC Scenario - select data in jdbc based on multiple conditions

Hello
I have a JDBC to IDOC Scenario. I have to select the records in JDBC based on different conditions each time. For example I have to select based on company code '1000' and Employee claasification 'E1' and date range. After I post these records in SAP again I want to select other records for some other company code '2000' and different business area and different dates. Basically I want to extract data multiple times based on different conditions.
Hiow do I achieve this?
Another question is in the JDBC to IDOC scenario since the sender adapter is JDBC and the sender adapter polls depending on the duration of time ( say 60 secs ) in the adapter once after I extract the data based on a condition how do I control in such a way that the same data is not extracted again.
Thanks
Naga

Hi Naga,
I have to select the records in JDBC based on different conditions each time. For example I have to select based on company code '1000' and Employee claasification 'E1' and date range. After I post these records in SAP again I want to select other records for some other company code '2000' and different business area and different dates. Basically I want to extract data multiple times based on different conditions.
-->
Such requirements cant be handle through select query of the sender...but you can handle this in the message mapping area.....you can fire a select query in the database to pick up records in a batch of 10K (do not keep any condition on this except for sorting). After the records come into PI you can send the message to your target based on the unique combination of "Company code+ Employee clasification + date range" handling this in the message mapping.
Another question is in the JDBC to IDOC scenario since the sender adapter is JDBC and the sender adapter polls depending on the duration of time ( say 60 secs ) in the adapter once after I extract the data based on a condition how do I control in such a way that the same data is not extracted again.
You can use the N--> C logic
The data records that you pick have a corresponding control table i assume. There should be a field STATUS where the initial status of record should be N.
After you pick the records this status should be made C so that only those records present in the database with status = N are picked up.
Mention the condition Status = N in the select query.
Thanks
Dhwani

For Michal Krawczyk - JDBC to IDoc Scenario

Hi Michal,
I am trying to run JDBC to IDoc scenario and somehow my mapping is not getting executed and because of that at receiver side IDoc is not getting LIFNR value which should come from Database table and as a result i am getting error 51 on posting the IDoc...
Mr Reddy suggested me to go through your blog i.e
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
After going through this blog i figured out that when i am trying to check the mapping as per way mentioned in the blog i am receiving the error "java.lang.NullPointerException"..But i am getting this error even for those scenarios also which are working fine on checking the mapping suggested by you.
Can you suggest something...
It would be better for you to understand my scenario if you will go through this thread also :
https://www.sdn.sap.com/irj/sdn/forums

hi Santosh,
1. this is not a private forum - post to <b>everyone</b> so everyone will be have a look -<b> this way you will get more answers</b>
2. if you want my direct help contact me by e-mail and I will contact you with my team leader and I will repair your XI problem then
thanks for understanding
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

JDBC Sample Test Scenario

Hi All,
Could any one guide us to some successfully working Sample Test Scenario Documents for SAP XI 3.0 using JDBC Adapter which we need to work on asap.
Thanks in advance,
Venkat!.

Hi All,
I am working on a jdbc to file scenario, Now that I am trying to connect to MSaccess, I have provided the following driver and connection parameters.
Database is in my local machine
Driver: jdbc.odbc.JdbcOdbcDriver
Connection url: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=D:/database_emp/EMP_Details.mdb
with table as EMPLOYEE
select query as SELECT * FROM EMPLOYEE WHERE FLAG='No'
Update as UPDATE EMPLOYEE SET FLAG='Yes' WHERE FLAG='No'
Having given that, when i m executing the scenario I am getting the following error
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (.mdb)};DBQ=D:/database_emp/EMP_Details.mdb' using the JDBC driver 'jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver (.mdb)};DBQ=D:/database_emp/EMP_Details.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
in the sender CC.
Please help.
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on Jan 19, 2009 11:02 AM

Database error for JDBC to Proxy Scenario

Hello SAP PI Gurus,
I am having a JDBC to Proxy Scenario .And the interface is running at 10 min of duration.
However, my other interface are running fine with the same details.
But for this interface, it giving the belwo error :
Database-level error reported by JDBC driver
while executing statement 'call proc_dtdc_prod_summary'.
The JDBC driver returned the following error message: '
com.mysql.jdbc.exceptions.MySQLSyntaxErrorException: Table
'dtdc_prod_summary_temp' already exists'. For details,
contact your database server vendor.
So increased the time from 10 min to 20 min to 30 min. But the erro remians.
So pls look into this and give your suggestion.
Regards,
Ravi

Hi Ravi,
Please check execution of your stored procedure is resulting with creation of Table : dtdc_prod_summary_temp.
Modify your stored procedure to just fetch records or insert records in the existing table. Or change the code to Create a table 'dtdc_prod_summary_temp only if it doesn't exits in the Table data base.
Regards
Praveen K

Synch SOAP scenario - access request data as part of response mapping?

Hello experts,
I have a synch SOAP scenario which is working but I want to improve the error handling.
Under normal situation I send the SOAP request and the remote web service responds with a given message structure which includes my invoice number as a key field. I then create an IDOC with this number and processing is great.
However, sometimes there is an error response from the web service which follows a different message structure and does not include the invoice number :-(
There could be many reasons for this error such as a field was missing or wrong format or even we ran out of prepaid web service calls (this is to get a government approval of invoice which we pay for in groups of approvals).
When they respond with an error I would like to send this information in IDOC to SAP, but I have no invoice number to tie the response to. Therefore the information is kind of useless in ERP. Is there a way in PI for a response message to reference the synchronous request data we sent to the web service in the first place?
Many thanks for your ideas,
-Aaron

Hi Aaron,
Also you can define static variables Sharing data between message mapping in PI 7.1
About Mark suggestion you have an interesting Adarsh Dhingra's blog here Sharing data between two message mappings through Dynamic Configuration
I think the better way is to use the Harish approximation because is the solution more standard.
Regards.

Jdbc-rfc synchronous scenario

Hi...All,
we r plaing to do JDBC-RFC Synchronous Scenario with out BPM,please tell me any settings are required for this scenario.any body is having any links regarding this type of scenario pls share with me...that is helpfull for me...
thanks in advance,
Pasi.

Hello Pasi,
JDBC-RFC Synchronous Scenario with out BPM,
Go through this links...
JDBC Sync - RFC Sync Scenario without BPM
File - RFC - File without a BPM - Possible from SP 19.
JDBC-RFC-File
Re: jdbc-rfc synchronous
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
/people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
JDBC-RFC Scnario mapping problem
Thanks,
Satya Kumar
JDBC---RFC will Support Sync?????????

File to JDBC to File Scenario

Dear Bhavesh,
I am doing a File to JDBC to File Scenario from your reference blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3928. [original link is broken] [original link is broken] [original link is broken] [original link is broken] This scenario is same as File to RFC to File scenario I believe. The only change I found is in Message Interface.
The Message Interface used here are:
1.     OB File Request
2.     OB Abs File Request
3.     IB File Response
4.     IB Abs File Response
5.     Abs Syn File Request File Response
6.     Abs Syn JDBC Request JDBC Response.
I am able to get the response from JDBC but while mapping to file I am getting mapping error. In fact I have followed ur Blog as it is.
The IP steps are:
Receive Step , Syn Send (Abs Syn File Request File Response) Step , Send Step.
Could you please help me out, if you have time .
Thanks in advance.
Shaik

Hi ,
Sorry for pointing you the thread.
I have created the IR as it is in File RFC File Scenario, but I have created Abs Syn Message Interface for JDBC request and Response.
I have two Abs sync Message Interface and two mapping programs, namely
Source Interface:
Abs Sync Message Interface
   File Request
   File Response
Target Interface:
Abs Sync Message Interface
JDBC Request
JDBC Response
Mapping Interface:
File Request to JDBC Request
JDBC Response to File Response.

SAP- JDBC(synch)- SAP scenario

Similar Messages

Maybe you are looking for