How to connect lap to internet by using the E52 mo...

I am using nokia E52 mobile i try to connect my laptop to internet by mobile through nokia Ovi store but it says connection fail.
Can anyone assit me to connected to internet?.....
Siva

Yoou could try PC Suite, or try completely removing all Nokia/Ovi software and drivers from your PC including drivers and running Nokia PC Cleaner and then try a fresh install. Also check your firewall is not blocking PC Suite/Ovi suite !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

How to connect a Sony Bravia TV to the internet through your Airport network

Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

I have now had a detailed reply from Sony Europe and the way to do this is to:
1.       Press Home on the TV Setup
2.       Use the right and left arrow to select Setting.
3.       Use the up and down to select Network, press Enter.
4.       Select Network Setup.
5.       Select Wireless setup.
6.       Select Scan
7.       Select your network
8.       A new screen will appear asking for entering the security key.
9.       Enter your WPA2 key.
10.   Select Enter.
11.   It will take you back to the same screen asking for entering the
security key.
12.   Press the right arrow.
13.   Select Auto.
14.   Press the right arrow.
15.   Select Save and connect.
These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

How to connect my ipad with mac using bluetooth?

how to connect my ipad with mac using bluetooth?

You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
iOS: Supported Bluetooth profiles

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

My solution, which is not much, is to restart iPhoto and it then connects to the Internet. This has been an ongoing unsolved problem.

Hi, can anybody tell me how I connect my iPad to AppleTV using "home sharing" ? Thanks

Hi, can anybody tell me how I connect my iPad to AppleTV using home sharing? I can,t find hoe sharing on my iPad. Thanks

Apple TV
http://support.apple.com/kb/HT4437
http://support.apple.com/kb/HT5209
http://support.apple.com/kb/HT4352

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support?

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support in the UK?
Thanks

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

My iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?

my iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?

5.0.2 has not been released, thus you can not upgrade.
Stedman

How to connect our outbound function module to the message type

how to connect our outbound function module to the message type any transcation code exits to assign the message type with the function module .
Thank in advance .
A. Thiru

Hi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan

HT5538 How do you separate multiple iOS devices using the same apple id account for Face Time calls and iMessaging?

How do you separate multiiple ios devices using the same apple id account for Face Time calls and iMessaging?

The only way I have seen is to have each device use a if fervent email account, if they all are on the same email the FaceTime connection is either to a phone number or to an email address. If they ar all on the same email, it is up to the user to decide which to use.

How to disable access to internet completely in the jnlp file

Hi All,
Can someone help me in figuring out how to disable access to internet completely in the jnlp file.
To be specific with the scenario if the client does not have the JRE installed, i would like to have it downloaded from the server where application runs instead of going to java.sun.com website which needs internet access.
How can we configure it in such a way that it does not go to internet at all.
Here is the snapshot of my jnlp file
<j2se version="1.5.0+" href="http://java.sun.com/products/autodl/j2se" initial-heap-size="128m" max-heap-size="128m"/>
I tried with the following and still unsuccessful.
<j2se version="1.5.0+" initial-heap-size="128m" max-heap-size="128m"/>
Could not find any useful information in the documentation.

see post from Mike at:
http://forum.java.sun.com/thread.jspa?threadID=704112&messageID=4082098#4082098
for how to set up your own autodownload of jre from within your internet.
/Andy

My 12" powerbook logics card crashed. I have a 17". How do i retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"?

My 12" powerbook logics card crashed. I have a 17". How do I retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"? Where on the 12" hard drive do I go to search for them?

If the 12's logic board is trashed, I don't think you can get into FireWire Target Disk Mode. The computer has to start to get to FWTDM. Will it starte and run at all?
If it won;t start, you will have to go inside and extract the hard drive. Then get this gadget:
Newer Technology Universal Drive Adapter USB 3.0/2.0 - connects any 2.5", 3.5" or 5.25" drive
It allows you to connect a bare drive to another computer that has USB. It will act just like an external disk drive. Assuming the 12's drive is not damaged due to the LB failure, you can retrieve files quickly.

I currently have a mac osx, and my CC keeps coming saying its expired, when it should be running the CS6 design standard. So how do I get my platform to use the CS6 as my default instead of the CC one.

I currently have a mac osx, and my CC keeps coming saying its expired, when it should be running the CS6 design standard. So how do I get my platform to use the CS6 as my default instead of the CC one.

Sign in, activation, or connection errors | CS5.5 and later
And you can change the default program for a file type under File --> Info.
Mylenium

I am not being able to connect to another Apple device using the Face time what settings do i need to check.The device being used is an iPad mini

I am not being able to connect to another Apple device using the Face time.The device being used is an iPad mini.
The internet connectivity is perfect the wifi is even working.

'''plafstudiesdotc'''
You are welcome.
'''''So that other users can find answers that have worked, please take a couple of minutes to return to the forum, sign in and click "Solved" next to my answer. Thanks. '''''

How to transfer pc file to Samsung using the adobe reader app?

how to transfer pc file to Samsung using the adobe reader app?

I solved the problem. I manually created my own Adobe PDF folder by connecting the phone via usb to my PC, Windows Autoplay gave me the option to 'Open device to view files'. Explorer then displayed all the folders on the phone. I created an Adobe PDF folder manually and copied the PDFs I wanted to view into that folder. Adobe Reader then found the files without a problem. I clearly was missing something quite simple but something I'm sure a lot of people would miss. Perhaps if the next version of Adobe Reader for Android created this folder automatically, like Kindle and Kobo and other readers do, it might save a lot of people a bit of a headache.

How to connect lap to internet by using the E52 mo...

Similar Messages

Maybe you are looking for