Change color of separator line in ActionBar between buttons?

There is a black line that appears after everything inserted into the actionbar, i want it to be a different color, or even be two lines together being different colors.

You have to edit the TransparentNavigationButton_up.fxg/TransparentActionButton_up.fxg or create your own skin for the button using TransparentActionButtonSkin.as as a template and create your own fxg files.
http://jessecouch.com

Similar Messages

  • My screen is changing colors and has lines in all the screen what can i do

    I accidentally dropped my cellphone s couple of times. Then it got wet but I did not know it was wet and I connected it to my charger then my screen started to change colors and had lines covering the whole screen what can I do? I need help!

    There is nothing you can do with that unit
    Apple should exchange it for an Out of Warranty exchange  identical 5S  for $269 if you are in the US ,similar pricing elsewhere

  • My ipod touch's screen is changing colors and will not respond to the buttons

    my sisters ipod touch is a 4th gen and the screen recently started changing colors, it does not respond to the buttons and will not turn off. should i wait for the battery to die then charge it. she said it started happening when she was charging it. could it be the charging cable? i do not know what OS it has.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Change color of scanned line art

    I'm want to scan a line art of a leaf, make the white background transparent, and change the black lines to red. I can scan the art to Photoshop, get rid of the white background, but I can't change the black lines to red. After scanning, the background layer is locked and won't allow editing.I tried scanning as a bitmap, b&w scalable, 16 color, etc. Nothing works.

    Image > mode > grayscale, then image > mode > RGB. Then create a solid fill layer layer > new fill layer > solid color. Pick your color and set that layer's blend mode to screen.
    Not sure how you're deleting the background, while keeping the leaf on the background layer. But if you make it a grayscale or RGB image, you should be able to convert the background layer by going to layer > new > layer from background.
    If you do manage to get the layer off the background you can clip the solid fill layer to the leaf layer by having the solid fill layer active and pressing ctrl-alt-g, or by alt-clicking the space between the two layers in the layers panel (you'll see you cursor change).

  • Change Color from grid lines in Flash 2D Line Chart

    Hi,
    does anybody know how to change the color from the grid lines in 2D Line Chart?
    The color is always black (000000), I will use gray (CCCCCC).
    I can use a custom XML. Can you give me an example please???
    Where can I read something about the possible XML-Tags in Custom XML for Charts?
    Best regards
    Simona

    Simona,
    anychart.com has XML reference you can use for the charting engine in APEX.
    Try using custom XML and sticking this inside the grid > values tag:
    <lines color='0xCCCCCC' />- Marco

  • Adobe Acrobat Pro: Possible to change color of drawn lines / polygons? How?

    In working with Adobe Acrobat Pro --editing PDFs, is it possible to change the color of lines and polygons that are under the comments section. I would like to have lines and polygons of 3 maybe 4 different colors on the thing that I am working on..  Is this possible?  How?

    Press Ctrl+E to open the Properties bar and you'll be able to change the
    color of the comments you're creating.

  • How to change color of a line on a graph

    Bonjour à tous,
    I want to change the color of line in a graphic, but i dont know how to do.
    Thanks for your answer
    Ivan

    change the Color Scheme on Chart Attributes page to Custom then put a comma seperated list of colors in the Custom Colors text area of Chart Attributes of your chart. For example, if you have 2 line series in the chart then you could put db15db,DD0000 in Custom Colors text area
    DD0000 is actually a color in hexadeccimal number format
    FFFFFF stands for white and 000000 stands for black. You also get to pick colors from a color picker in  Chart Attributes page
    Regards,
    Vishal
    Oracle APEX 4.2 Reporting | Packt Publishing
    Vishal's blog

  • Is it possible to change  color on the line strip/code view in CS6?

    Hello -
    I did some research on this and cant seem to see if this can be done - I was hoping to change the color of the blue line menu on the code view screen.
    Eric

    I take it you're referring to that vertical line in the left hand side of Code View? I don't think it's possible to change the color.  If you disable line numbers (#), it's a bit less noticeable.
    Nancy O.

  • How to change width of separating lines of cells

    Could u explain me how can I do to make the lines into jTable less wide.
    Thanks a lot.

    Could u explain me how can I do to make the lines into jTable less wide.The lines between the rows and columns are only 1 pixel wide so I'm not sure how you make them smaller. You can prevent the painting of the lines by using:
    table.setShowGrid(false);
    table.setIntercellSpacing(new Dimension(0, 0));

  • Dynamic button change color on click and reset the unclicked buttons

    Hi,
    I have have 3 buttons created dynamically from JSON file.
    When I click on any of them the color is changed to red. (this is good).
    But when I am going to click another button the previous red that I have clicked earlier doesn't change to it's grey statement, except from the last button which is the only one that works (is changing between red and grey).
    If for the JSON make variable for the index e.g.(0,1,2) is working, but I want to make it work without index it. I want to make it with symbol's attr.
    here is the files if someone can give it a try.
    Dropbox - hover.rar

    At stageCreationComplete I have it as a function, but it doesn't work correct.
    I want to know why.
    The problem is that when I use getJSON, it creates the ChildSymbols and keeps in memory only the last record (index).
    So, I believe that I need to count the indexes of the JSON files and store it perhaps.
    What I mean.
    My JSON structure:
      {     "title" : "Central",
            "category": "",
        "image": "images/thumbs/models/central.png",
        "large": "auto-2f-kent-large/0.png",
            "frame": "frames-large/0.png",
             "jsonf": "auto2fk.json"
      {     "title" : "Telescopic",
            "category": "",
        "image": "images/thumbs/models/telescopic.png",
        "large": "auto-2f-til-large/0.png",
            "frame": "frames-large/0.png",
             "jsonf": "auto2ft.json"
      {     "title" : "Glass",
            "category": "",
        "image": "images/thumbs/models/glass.png",
        "large": "auto-glass-large/0.png",
            "frame": "frames-large/0.png",
             "jsonf": "autoglass.json"
    it has 3 index. And on ChildSymbol I give the attr as .attr("id", item.title);
    If I make index.length it will give me 3 as number.
    But if I make item.title.length it will count the letters of its Word, the result will be (7,10,5).
    How Can I make it to count the word itself an give me 3 as a result?

  • Line items separed line(Uline) in SAP Script

    Dear Friends.
    I want to print a separated line (Uline) in-between each line item and the line should not come when it is last line item of the page.
    I am going to print in first page with 7 records and next all pages with 17 records.
    here I have written it for first page which is working but how to do with rest of the pages???
    Here I have taken a flag when the line item reach to 7th record, and i am using it in my form window as bellow:
    /: IF $GV_FLAG& = 'X' AND &PAGE& = '1'
    /: ELSE
    UN &sy-uline(151)&
    /: ENDIF
    The same i want  for rest of the pages.....but the remaining pages will have 17 records per a page..
    Could you pls suggest me on this...
    Thanks,
    Sridhar.

    Hi Sridhar,
    I am assuming that $GV_FLAG& is for 7 records, so take another falg like this for second page $GV_FLAG2& and count it for 17 records.
    [code]/: IF $GV_FLAG& = 'X' AND &PAGE& = '1'
    /: ELSE
    UN &sy-uline(151)&
    /: ENDIF
    /: IF $GV_FLAG2& = 'X' AND &PAGE& <> '1'
    /: ELSE
    UN &sy-uline(151)&
    /: ENDIF[/code]
    Regards
    Sudheer

  • Changing color of arrow button in JComboBox

    Hi all,
    Can somebody please help me to change the color of arrow button in JComboBox

    The default color uses to draw the arrow is UIManager.getColor("controlShadow"), so if you put a different color there, that would be used for the arrow buttons. Of course, that color is likely used other places as well, and so any other place where it is used would get your changed color too. For example, the scrollbar buttons for the scrollbar in the popup list would likely use that color.
    Further, the current look and feel can override this; for example, the Metal L&F creates its own button, which uses its own icon which ends up using a hard-coded color of black when painting the arrow.
    : jay

  • Images Change Colors between monitors while the UI stays the same

    Hey! Im having an issue where photoshop changes the colors when I move the window between my monitors, seen here: http://sta.sh/04y5s60vf3j This isnt due to the monitors themselves being different, it actually changes after a few seconds of moving it inbetween the monitors. The left one has been callibrated with a spyder 3 elite which I no longer have access to. I applied the file with windows color management instead of the spyder utility. The second one is new, and it is not callibrated by anything, but instead was done by hand with the built in brightness/contrast/custom RGB settings. Both of them are very close to eachother, enough so for my tastes. but when photoshop changes what the image looks like, it's causing problems. Interestingly enough, when I disable callibration for the monitor on the left, the image does not change colors between monitors, but instead always appears as it does on the right. but then they don't match up and the whole screen looked washed out because it's uncallibrated, so that doesnt do me any good. Another interesting thing to point out, is when this image is saved as a .JPG, and viewed with firefox the image appears exactly like the monitor on the LEFT (which is my main monitor) despite the left monitor being the one that is force changed. does anyone have any suggestions? It also appears that windows photoviewer is behaving the same way, though firefox does not. Meaning when I open an image in all 3 on the left monitor, they look the same, but when opened on the right monitor, windows photo viewer and photoshop both display the image as brighter and redder than firefox does. This is frustrating, because it seems photoshop is changing the image with my callibration on my left monitor to match what it looks like on the web, which it does. but it doesn't do this for the right monitor, or when the left is uncallibrated. Another issue I can see with this is even if the UI is the same shade of gray, the images are different between the monitors because of this change. Does anyone have any suggestions?
    - BD

    Alright! So I reread through all this, poked at some things on the internet, and I'm going to attempt to summarize what would be a good solution for all this (And it seems, it still won't be perfect, but to get myself into the best environment I can for not messing with images for an hour trying to make them look nice before I post them to the web. I painted something yesterday on the cintiq, popped it over to my laptop screen and it just looked washed out and terrible.)
    1. Get a X-rite EODIS3 i1 Display Pro, Callibrate laptop and cintiq. I do have the money to drop on something like this, especially if it's a time saver.
         Things I'm not sure about:
              a. There was a ton of complaints about the software not working when I checked reviews, but also a ton that said everything was great. most of them were mac users though.
              b. I'm not sure if problems would still be posed, even while calibrated, by me having a wide gamut monitor.
              c. I'm a terrible excuse for a human being and I think the colors showing up brighter on the wide gamut screen is pretty (I should just make my images this bright on a normal screen and there won't be any issues. >.>)
    2. Set Firefox to color manage (easy enough)
    3. Change my photoshop working space to sRGB (since they'll have been calibrated at this point)
    3. Accept the fact that most of the people who look at my work will be doing so on a monitor that is almost certainly uncalibrated, and I can't control what they will see on my screen, but I CAN control if the colors are -actually- what I want them to be on any properly calibrated device. which is probably the best way to go anyways.
    4. Make paintings, have fun.
    Now, you two have been going on about all sorts of interesting things in here, and it seems that calibration issue run much much deeper than I ever thought. Do either of you have recommendations for how I should tweak this list of things to do or other things I can/ should do? I'm not currently a working professional, but if I have anything to say about it, I will be within a few years (I'm going to school for illustration and studying concept design on my own time) so it'd be useful for me to get into good habits now.
    - Brendavid

  • How do I change the line color in a line graph?

    I used Illustrator to create a line graph. (Not my desired option as I normally import them from R and then edit, but the textbook wanted to show that you can create graphs and edit them in Illustrator)
    Anyway, I did all of the editing except that I can't change the color of the line. My assignment requires me to match the textbook example and the textbook does not provide instructions on how to do it. I've done just about any method I can think of and the line still stays light gray. I'm almost willing to just give up and lose the points but something as simple as color can't be this hard, right? Right?

    Whenever I try to shift+direct select it thinks I want to move the line, so as I shift + direct select and drag my mouse across the line (to highlight it all) it moves a chunk of the line and turns it into a near perpendicular line.
    I found the appearance window, it just says "Path" (the color I want it to be that it's not)
    "Stroke" 4pt
    "Fill" (the color I want it to be that it's not)
    "Opacity": Default
    And some other buttons. I think I'll try the help line tomorrow, I know I saw a customer service number somewhere and I'm only here because the chat was unavailable. This is only one of my 3 problems with my assignment so I'll search here for answers to the other two. Learning new things is rarely fun.

  • Need to change colors of lines in an Omniportlet Line Chart

    I am running Oracle Portal on a 10g Web server. I have created an Omniportlet and I am displaying data in a line chart. Is it possible for me to define the colours of the lines in the linechart?

    Hi I didn't changed colors in line chart but I managed to redesign lot of omniportlets.
    What you can do is to re-define CSS.
    Add an HTML portlet in your page with some CSS embedded.
    To catch wich class are to be re defined, I recommand you to use firefox with the extension Webdevelopper.
    Use the "Informations - display element information" functionnality to catch wich class are used for your chart.
    Then redefine those classes in your custom CSS.
    Hope that will help

Maybe you are looking for