How to construct table in jsp for the resultset from helper class

Hi Dudes!!!
Want to construct table in jsp for the resultset, but the resultset are retrieved at the helper class.I constructed Table in Helper class Using StringBuffer and return it as string from the helper class.Is their any other feasible and efficient way to construct table in Jsp for the resultset from Helper class.Solution will be highly appreciated.Thanx in Advance.

no, we can't.
Certainly noone can with such vague specifications even if they had the intent to do so.
"the computer", which computer?
"attach to our current page", what is meant by that?
And noone should ever help you if you're planning to breach security anywhere.

Similar Messages

TS1389 how to authorize computer in itunes for the purchased from another account

how to authorize computer in itunes for the purchased from another account ??

Use that account's Apple ID and password; the procedure is otherwise the same as authorizing it for the first account. If the iTunes library contains protected content from more than five iTunes Store accounts, you may not be able to fully sync it.
(92807)

How to set up 2 agreements for the same From,To,DocType,Version in B2B11g

Hi
I am having an issue in configuring more than one agreement for the same DocType, Version, From and To partner in Oracle B2B11g.
When I click "Valid" button on the second agreement it errors out saying duplicate agreement is found for the same DocType, Version, From and TO partners.
Is there any mechanism to over ride this?
We need to have multiple agreements created for the same To Partner, From Partner, Doc Type and Version. Otherwise we will end up creating multiple partners which is a real pain.
Multiple agreements are required because we have to set up different Interchange and Group IDs for each transaction.
-Sriharish.
Edited by: 840696 on Mar 1, 2011 7:30 AM

You can not have two agreements for same From TP,To TP,DocType & DocType revision combination in B2B 11g.
Multiple agreements are required because we have to set up different Interchange and Group IDs for each transactionIs this requirement for outbound or inbound? You may send Internal Properties from back-end to override envelope parameters in Oracle B2B in case of outbound -
B2B 11G Outbound EDI Envelope Override
http://www.b2bgurus.com/2008/09/internal-properties-in-oracle-b2b.html (this blog is for 10g, so read concept only, not settings)
In case of Inbound, TP identification can be done on the basis of exchange, interchage, group. So if any of this can be same then you may have single agreement. Make sure to enable property "Functional Ack Internal Properties" on B2B console (Administration --> Configuration)-
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/bb_config.htm#CEGEADFJ
Regards,
Anuj

How to grant access to sharepoint for the user from different Domain

Hi All
I need to grant access to user from different domain.
Where I can able to view the users in people picker (different domain).
Thanks in Advance.
Raj

Hi
Trevor Seward
Sorry to disturb
you again.
I am trying to restrict user from search from other domain, say we have domain A and Domain B, where I am trying to restrict all the user from domain B (Search users)for a site collection. I have found couple of stsadmin command to do so. but none
of them works. Below are the commands I have tried
STSADM.exe -o setproperty -pn peoplepicker-searchadforests -pv "domain:<Name>.domain" -url "http://Site URL"
stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv “(canonicalName=<Name>.domain*)” -url "Site URL"
we have two way trust.
Can you suggest any solution.
Thanks
Raj

Table Maintenance Generator for the table "J_1ISTATECD"

Hi,
How to create Table Maintenance Generator for the table "J_1ISTATECD". Can anyone please explain the steps for this.
Thanks in advance....
Regards,
Sriram.

Hi Sriram,
-->Create view in SE11
-->Goto transcation SE11 ABAP Dictionary
-->Select View and type in the name of the view you want to create.
-->Press the Create button
-->In the dialog box that appears, choose Maintenance View
-->Select tables and fields for the view
-->Activate the view
or
-->Create view in SE11
-->Goto transcation SE11 ABAP Dictionary
-->enter table name
-->go to Utilities
-->select table maintainance Genarator
-->Enter single step
--> enter Function Group(all the code for Table mainaitenace is stored here)
-->eneter single step
-->enter Authorization gorup(we can restrict some user,s not tot update data)
Activate the view
function Group -->goto se37 -- > menu bar goto->create function group with five letters ..
add the same function group in table maintainenece generatoror enter the sane table name in Function group Place..
if you dont know the Authorization group ( not given by Function design) put &NA&
or if you want to know the maintainence View already exists go to table TSTCV
enter Table name you can get the view available for the table name..
Regards,
Prabhudas

How to get values from a table(in jsp) for validation using javascript.

hi,
this is praveen,pls tell me the procedure to get values from a table(in jsp) for validation using javascript.
thank you in advance.

Yes i did try the same ..
BEGIN
select PROD_tYPE into :P185_OFF_CITY from
magcrm_setup where atype = 'CITY' ;
:p185_OFF_CITY := 'XXX';
insert into mtest values ('inside foolter');
END;
When i checked the mtest table it shos me the row inserted...
inside foolter .. Now this means everything did get execute properly
But still the vallue of off_city is null or emtpy...
i check the filed and still its empty..
while mtest had those records..seems like some process is cleaining the values...but cant see such process...
a bit confused..here..I tried on Load after footer...
tried chaning the squence number of process ..but still it doesnt help
some how the session variables gets changed...and it is changed to empty
Edited by: pauljohny on Jan 3, 2012 2:01 AM
Edited by: pauljohny on Jan 3, 2012 2:03 AM

How to find table name for the fields from Standard Extractor in CRM system

How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy

How to use taglibs in JSP for Database access

Hi
Could any one please tell me how to use taglibs in JSP for Database access
with regrds
Jojo

This is a sample how to connect to a MySQL database with JSTL 1.0:
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ taglib uri="http://java.sun.com/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>JSTL MySQL</title>
<link href="styles.css" rel="stylesheet" type="text/css" />
</head>
<body>
<c:catch var="e">
<sql:setDataSource var="datasource" url="jdbc:mysql://Your_Server_Name_Here/You_Schema_Here"
                       user="Your_Username_Here" password="Your_Password_Here"
                       driver="com.mysql.jdbc.Driver"/>
<c:out value="datasource= ${datasource}, Class = ${driver.class}"/>
<br />
<br />
<sql:query var="deejays" dataSource="${datasource}">SELECT * FROM Your_Table_Name_Here</sql:query>
<table>
<%-- Get the column names for the header of the table --%>
<c:forEach var="columnName" items="${deejays.columnNames}"><th><c:out value="${columnName}"/></th></c:forEach>
<tbody>
<%-- Get the value of each column while iterating over rows --%>
<c:forEach var="row" items="${deejays.rows}">
<tr><c:forEach var="column" items="${row}">
        <td><c:out value="${column.value}"/></td>
      </c:forEach>
</tr>
</c:forEach>
</tbody>
</table>
</c:catch>
<br />
<br />
<c:if test="${e!=null}"><span class="error">Error</span>�
<c:out value="${e}" />
</c:if>
</body>
</html>And this thread might help you:
http://forum.java.sun.com/thread.jspa?threadID=639471&tstart=44

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column

Please Help!!!
How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column.
                                  January 2014         January
2013                            +/-
                Region   Entry   Exit Total    Entry   Exit   Total   (Total of Jan2014-Total of Jan2013)
                A               2         3
40        5       7        30                    40-30= 10

What is a table structure? Sorry cannot test it right now..
SELECT <columns>,(SELECT Total FROM tbl WHERE Y=2014)-(SELECT Total FROM tbl WHERE Y=2013)
FROM tbl
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to get the spool id or how to create a spool id for the report .

hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.

Hi Raghu,
Execute this program.
REPORT ZTEST_3318                              .
tables: usr01.
perform send_report_to_spool.
*&      Form send_report_to_spool
      text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
        wf_listname type char12,
        wf_listtext like PRI_PARAMS-PRTXT,
        wf_copies type i,
        wf_days type i,
        wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
        wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to   wf_listname .
move: 'AP interface' to   wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
    move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination    = loc_dest
      copies         = 1
      list_name      = wf_listname
      list_text      = wf_listtext
      immediately    = ' '
      release        = ' '
      new_list_id    = 'X'
      expiration     = 1
      line_size      = 200
      line_count     = 65
      layout         = 'X_65_200'
      sap_cover_page = 'X'
      receiver       = 'SAP*'
      department     = ''
      no_dialog      = 'X'
    IMPORTING
      out_parameters = wf_params
      valid          = wf_valid.
if wf_valid <> space.
    new-page print on parameters wf_params no dialog.
    perform write_summary .
    new-page print off.
endif .
endform.                    "send_report_to_spool
*&      Form write_summary
      text
--> p1        text
<-- p2        text
FORM write_summary .
data: begin of itab occurs 0,
      matnr type matnr,
      end of itab.
select matnr
       from mara
       into table itab
       up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM.                    " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point

How to display table in jsp pages

hi all ,
i want to diaplay the table in jsp page...ie,if i click on some option then i need to get the table in jsp page
wiil u plz help me
thanks in advance
chintu

hi all..
i didnt ask how to design table in jsp...i am asking how to diaplay the table with data already stored in database...i just want to retrive the values in table and display in jsp.....
thanks in advance...
chintu

Drop down in the selection for the field from the table

Hi.
i want to put the drop down for the field from the table fo which i dont know the number of entries for the field zregion1 of the table zbwcntry.
please tell me how to use the function module and what could be the line of codes.
the drop down is for the select option on the slection screen of the classical report.
please help .

HI,
Check below code..it may help you.
REPORT Zbunu .
TYPES :BEGIN OF STR ,
       MATNR TYPE MATNR ,
       END OF STR .
DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
       VAR TYPE MARA-MATNR .
PARAMETERS : S_MATNR TYPE MATNR ,
              P_MATNR TYPE MATNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_MATNR .
SELECT MATNR FROM MARA INTO
CORRESPONDING FIELDS OF TABLE ITAB UP TO 1000 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE         = ' '
    retfield               = 'MATNR'
PVALKEY                = ' '
   DYNPPROG               = SY-CPROG
   DYNPNR                 = SY-DYNNR
   DYNPROFIELD            = 'S_MATNR'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = 'X'
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
tables
    value_tab              = ITAB
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
   PARAMETER_ERROR        = 1
   NO_VALUES_FOUND        = 2
   OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Ansumesh

....how to create table maintanence generator for a z table and how to use

Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddy

Hi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
<b>
Follow below steps</b>
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka.

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

How to construct table in jsp for the resultset from helper class

Similar Messages

Maybe you are looking for