How to consume JMS message in oc4j from web logic server 11.1.1.3

Hi all,
I would like to know how to consume the JMS messages in oc4j instance from 11.1.1.3 (web logic). Can anyone guide me any documentation? Thanks.
Soe

Hi,
Have a luk at the below link
http://blogs.oracle.com/TechMusings/2008/08/connecting_to_weblogic_jms_pro.html
you also have other options like creating foreigh JNDI or JMS bridge.

Similar Messages

How do i get the current version of web logic server on obiee 11g

Hey
I am pretty new to 11g and Weblogic
How do i get the current version of web logic server on obiee 11g(11.1.1.5), I know that it should be higher than 10.3.5.
Thanks

Hi,
Obiee11.1.1.5.0/6.0 both version supporting weblogic 10.3.5.0/6.0 both are no issues.
http://blog.whitehorses.nl/2012/02/26/a-few-quick-tips-for-upgrading-ofm-11g-to-patch-set-5/
also refer
http://docs.oracle.com/cd/E23943_01/bi.1111/e16452/bi_plan.htm#BABECJJH
Thanks
Deva

How to manually create security policy in integrated web logic server

Hi,
I am trying to run a webcenter portal app that uses web services and has security enabled thru policies. I am no expert in terms of web service security and I am encountering this error.
The password credentials cannot be obtained from the Credential Store Framework (CSF). Unable to retrive the csfKey "BASIC_KEY". The csf map "oracle.wsm.security" found in the credential store is being used and the following keys are found in this map...I know this is related to security but how do I define or create this in my integrated weblogic server? The web service I think use the oracle/wss_http_token_client_policy
Thanks
JDEV 11G PS5

Hi,
Found this link http://portal.intelitur.com/webcenterhelp/faces/helppages/main.jspx;jsessionid=GH3XQt2ZfTpLMRXQNytrrmLyfBh9DZR0nhjvwWgw8knck3FvjQ0J!1175791655!1369545269?locale=es-ES&vtTopicFile=wcadm%2Fwcadm_security_wss004.htm&config=OHW+Servlet&_adf.ctrl-state=17i2c8oad3_4
although I am unsuccessful
createCred(map="oracle.wsm.security", key="BASIC_KEY", user="user", password="user1", desc="Keystore key")when I execute this code using WLST, I am encountering below error
Traceback (innermost la
File "<console>", lin
NameError: createCred..what could be the cause?

How to associate Jrockit Mission Control tool to Web logic server

Hi,
Could you please clarify me the following doubt
I have installed JRockit Mission Control tool in my local machine. I just want to know how can I associate Jrockit Mission Control tool to my applicatiion server (its weblogic) . So that the tool will analyze the CUP time, Memory the application is consuming etc..
Your timely reply is appreciated.
Thanks,
Gopi.

Hi,
This is very easy to run Mission Control to analyze WebLogic JVMs runtime Informations...First of all enable -Xmanagement flag in the JAVA_OPTIONS of your Servers startScript. And then Mission control is ready to use...Just start Mission Control and follow the like: http://download.oracle.com/docs/cd/E13150_01/jrockit_jvm/jrockit/tools/relnotestools/relnotestools3.html
for more information on -Xmanagement please refer to : http://download.oracle.com/docs/cd/E13150_01/jrockit_jvm/jrockit/jrdocs/refman/optionX.html#wp1030433
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com(WebLogic Wonders Are Here)

How can one invoke a WebLogic EJB from a BPEL Server hosted on OC4J?

How can one invoke a WebLogic EJB from a BPEL Server hosted on OC4J?
Reason I ask is I keep getting this error:
javax.naming.NoInitialContextException: Cannot instantiate cla
ss: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotF
oundException: weblogic.jndi.WLInitialContextFactory]
Note: I am using <bpelx:exec> as a way to execute some java program.
Essentially my java client (essentially an EJB client hosted on Oc4J) needs access to wlclient.jar since it needs access to weblogic.jndi.WLInitialContextFactory. I have a EJB client running on BPEL server hosted on Oc4J that needs to access some EJBs hosted on weblogic.
Where do I place this wlclient.jar so that BPEL PM can start peacefully and at runtime discover the InitialContextFactory classes?
Placing it in the j2ee/home/applib doesn't solve the problem. The server fails to start up if I do this
I tried placing it in BPEL-INF\lib directory ...
I still get the same exception...see below for exception dump
I verified the BPEL suitcase, and it in fact does contain the jar file wlclient.jar
integration\orabpel\domains\default\deploy contains the bpel_BPELProcess2_1.0.jar file and snapshot of that is as follows:
<PRE>
│ bpel.xml
│ BPELProcess2.bpel
│ BPELProcess2.jpr
│ BPELProcess2.wsdl
│ bpel_BPELProcess2_1.0.jar
│ build.xml
│ buildxml.copy
│ graphics.xml
│
├───BPEL-INF
│ └───lib
│ myEJB.jar
│ wlclient.jar
│
├───META-INF
│ MANIFEST.MF
│
└───output
bpel_BPELProcess2_1.0.jar
</PRE>
I tried using the BPEL-INF\jar directory...Is this something the obant automatically detects? or do I have to modify the build.xml? I created this directory and let Jdev deploy to local BPEL server->default domain handle it
#####################3
I even tried copying the wlclient.jar to
integration\orabpel\system\classes but this doesn't help since the BPEL PM fails to start if I explode this jar into this directory.
In short,where do I place the wlclient.jar so that this exception can be contained.
I edited the build.xml to point to the jar, that too didn't work, unless I made some mistake in the file
<bpelc classpath="${basedir}/BPEL-INF/classes;${home}/system/classes;${home}/lib/j2ee_1.3.01.jar;${basedir}/BPEL-INF/jar/wlclient.jar" input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
DETAILS on ERROR
I get the following error
Process "BPELProcess2" (revision "1.0") successfully compiled.
<2005-12-14 09:17:55,770> <INFO> <default.collaxa.cube.engine.deployment> Proces
s "BPELProcess2" (revision "1.0") successfully loaded.
05/12/14 09:18:36 weblogic.jndi.WLInitialContextFactory
javax.naming.NoInitialContextException: Cannot instantiate cla
ss: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotF
oundException: weblogic.jndi.WLInitialContextFactory]
05/12/14 09:18:36 at javax.naming.spi.NamingManager.getInitialContext(Nami
ngManager.java:652)
05/12/14 09:18:36 at javax.naming.InitialContext.getDefaultInitCtx(Initial
Context.java:243)
05/12/14 09:18:36 at javax.naming.InitialContext.init(InitialContext.java:
219)
05/12/14 09:18:36 at javax.naming.InitialContext.<init>(InitialContext.jav
a:195)
05/12/14 09:18:36 at com.ejb.test.MapFinder.getDefaultMapName(Map
Finder.java:37)
##################3
with the bpelx all I have is two lines of code that creates a java object and calls a method on it.
The method does this:
    private String initialContextFactory = "weblogic.jndi.WLInitialContextFactory";
    private String providerUrl = "t3://localhost:7001";
    private String urlPkgPrefixes = "";
    private String mapEjbJndiName = "ejb/mycompany/Redlands";
    public String getDefaultMapName() {
      try {
          Hashtable env = new Hashtable();
          env.put(Context.INITIAL_CONTEXT_FACTORY, getInitialContextFactory());
          env.put(Context.PROVIDER_URL, getProviderUrl());
          if (getUrlPkgPrefixes() != null && !getUrlPkgPrefixes().equals(""))
              env.put(Context.URL_PKG_PREFIXES, getUrlPkgPrefixes());
          System.out.println("    " + getInitialContextFactory());
          System.out.println("    " + getProviderUrl());
          System.out.println("    " + getUrlPkgPrefixes());
          System.out.println("    " + getEjbName());
          // Get a naming context
          context = new InitialContext(env);
           Object ms = context.lookup(getEjbName());
          MyEJBHome home = (MyEJBHome ) PortableRemoteObject.narrow(ms, MyEJBHome.class);
          myEjb = home.create();
          return myEjb.getDefaultName();
      } catch (RemoteException re){
          System.out.println(re.getCause().getMessage());
      catch (Exception ex) {
          ex.printStackTrace();
      return null; //if unable to resolve the context factory etc...
    }

I did exactly as you suggested. I edited the application.xml and added this
<library path="C:\ArcGIS\test\bea\wlclient.jar"/>
I didn't add weblogic because the needed classes were all in wlclient.jar
I also edited the BASE_OB_CLASSPATH to include this jar.
Here is the result when I just start BPEL PM Server. Somehow BPEL PM doesn't like to have wlclient.jar in its classpath during startup.
Failed to create "worker" bean; exception reported is: "javax.naming.NameNotFoun
dException: remaining name: env
at weblogic.j2eeclient.SimpleContext.lookup(SimpleContext.java:49)
at weblogic.j2eeclient.SimpleContext.lookup(SimpleContext.java:57)
at weblogic.j2eeclient.SimpleContext.lookup(SimpleContext.java:62)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.ejbCreate(WorkerBean.java
:49)
at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.evermind.server.ejb.MessageDrivenHome.getInstance(MessageDrivenHo
me.java:1235)
at com.evermind.server.ejb.MessageDrivenHome$2.run(MessageDrivenHome.jav
a:1150)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
<2005-12-29 13:39:05,281> <ERROR> <collaxa> <ServerManager::loadAllDomains>
ORABPEL START-UP ERROR!!!!!!!!
OraBPEL run-time system failed to start due to exception:
Could not initialize jms connection pool.
Could not initialize connection pool for connection factory "java:comp/env/jms/
ollaxa/BPELInvokerQueueFactory"; the reason is remaining name: env/jms/collaxa/
PELInvokerQueueFactory.
Note: So what I did was to removed the entry from application.xml and tried with just obsetenv.bat having the wlclient.jar added to it. This too failed!!
Here is a snapshot of the error I got.
Process "BPELProcess2" (revision "1.0") successfully compiled.
<2005-12-29 13:53:11,207> <INFO> <default.collaxa.cube.engine.deployment> Proces
s "BPELProcess2" (revision "1.0") successfully loaded.
05/12/29 13:53:32 Cannot instantiate class: weblogic.jndi.WLInitialContextFactor
y
05/12/29 13:53:32 javax.naming.NoInitialContextException: Cannot instantiate cla
ss: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotF
oundException: weblogic.jndi.WLInitialContextFactory]
05/12/29 13:53:32 at javax.naming.spi.NamingManager.getInitialContext(Nami
ngManager.java:652)
05/12/29 13:53:32 at javax.naming.InitialContext.getDefaultInitCtx(Initial
Context.java:243)
05/12/29 13:53:32 at javax.naming.InitialContext.init(InitialContext.java:
219)
05/12/29 13:53:32 at javax.naming.InitialContext.<init>(InitialContext.jav
a:195)
05/12/29 13:53:32 at com.esri.adf.ejb.test.MapFinder.getDefaultMapName(Map
Finder.java:57)
05/12/29 13:53:32 at bpel.p0.ExecLetBxExe1.execute(ExecLetBxExe1.java:62)
05/12/29 13:53:32 at com.collaxa.cube.engine.ext.wmp.BPELXExecWMP.__execut
eStatements(BPELXExecWMP.java:49)
05/12/29 13:53:32 at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perfo
rm(BPELActivityWMP.java:185)
05/12/29 13:53:32 at com.collaxa.cube.engine.CubeEngine.performActivity(Cu
beEngine.java:3398)
05/12/29 13:53:32 at com.collaxa.cube.engine.CubeEngine.handleWorkItem(Cub
eEngine.java:1905)
05/12/29 13:53:32 at com.collaxa.cube.engine.dispatch.message.instance.Per
formMessageHandler.handleLocal(PerformMessageHandler.java:75)
05/12/29 13:53:32 at com.collaxa.cube.engine.dispatch.DispatchHelper.handl
eLocalMessage(DispatchHelper.java:100)
05/12/29 13:53:32 at com.collaxa.cube.engine.dispatch.DispatchHelper.sendM

How to send error message to forms from Database Trigger

Hi, Please help me to send error message to forms from Database Trigger?
RgDs,
Madesh.R.M

You are correct, the On-Error trigger is a Forms trigger. However, if your Form is going to display the error generated by the database stored procedure or trigger - you might not see the database error in your Form unless you check the DBMS_ERROR_CODE in the On-Error trigger and manually display the Error Code and associated Text. I've see this happen with a co-worker. The Form she was working on was based on a table with an Before-Insert trigger. Because she was not explicitely handling the error from the Before-Insert trigger in the Forms On-Error trigger, her Form appeared to halt for no reason at all. Once she added code to the On-Error trigger in the Form to handle the DBMS_ERROR_CODE, she discovered the trigger was producing an error and was able to show the error to the user in the On-Error trigger.
I understand the desire to keep as much as possbile in the database, but with that comes some extra coding in your Forms to handle this. This extra coding could easily be placed in a Forms Library, attached to a Form and called in the On-Error trigger. Your code could look like this:
DECLARE
   /*This example assumes you have an Alert defined
      in your Form called: 'ERROR' */
   al_id    ALERT;
   al_text VARCHAR2(200); /* Max text of a Forms Alert message*/
   al_btn   NUMBER;
BEGIN
IF DBMS_ERROR_CODE != 0 THEN
   /* Error code is ORA-00000 Normal Successful completion
       So only handle non-zero errors */
   al_text := DBMS_ERROR_CODE||':'||DBMS_ERROR_TEXT;
   al_id := Find_Alert('ERROR');
   set_alert_property(al_id, alert_message_text, al_text);
   al_btn := show_alert(al_id);
END IF;
END;Your original question was "How to send error message to forms from Database Trigger?" The answer is you don't because Forms already gets the database error code and database message through the Forms DBMS_ERROR_CODE and DBMS_ERROR_TEXT functions. Look these up in the Forms help and it should clear things up for you.
Craig...
Edited by: CraigB on Jun 14, 2010 4:49 PM
Edited by: CraigB on Jun 14, 2010 4:49 PM
Edited by: CraigB on Jun 14, 2010 4:50 PM
Edited by: CraigB on Jun 14, 2010 4:51 PM
Edited by: CraigB on Jun 14, 2010 4:51 PM

How to acknowledge JMS messages manually in BPEL

How to acknowledge JMS messages manually in BPEL?
Thanks!

If Oracle BPEL/SOA Dev team is watching this form then please add this feature as all the major vendors support this.

How do I suppress messages/loading bars from Import-Module and Import-PSSession?

Hello,
How do I suppress messages/loading bars from Import-Module and Import-PSSession?
I am writing a script that will be using these commands and it makes the script look clunky/scary to novice users.
Thank you for your time.

Sorry to bring this back up, but it seems that the ProgressPreference worked for Exchange, but it didn't affect the Active Directory progress bar. Any ideas why?
Strange, this worked just fine for me (no module loading indication):
PS C:\Users\mike.admin> $ProgressPreference = 'SilentlyContinue'
PS C:\Users\mike.admin> Get-ADUser mike.admin | Select Name
Name
mike.admin
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)
I do run the Import-Module command inside a function, but I doubt that would do it because I assume the preference is set scriptwide.
This will work anywhere.
$global:ProgressPreference='SilentlyContinue'
¯\_(ツ)_/¯

Change from jboss to Oracle Web Logic Server

Dear all
Currently, we have used the jboss for start T24 Browser, ATM, ... Now we want to change it to ORACLE WEB LOGIC SERVER
Could you please guide me detail as per-requisist , license , how to configure, where could i download to test it?
Thanks

Hi,
Please follow the below steps :-
1)In order to install Weblogic it depends on the type of OS bit version.
If you would install it on a 32 bit version then it has embedded JDK in it but if you use 64 bit then you need first either install Sun JDK or Jrockit JDK 64 version and download the Generic jar and install it.
Java 64 bit could downloaded from the below URL :-
http://www.oracle.com/technetwork/java/javase/archive-139210.html
Note :- Java 8 is not supported or certified with Weblogic.So request you to either use Java 6 or Java 7 depending upon the version of Weblogic and its certification.
====
2)Could you please refer to the below certification matrix to verify if the OS is supported with Weblogic on which the configuration would be done :-
   Oracle Fusion Middleware Supported System Configurations
    Either you could use Weblogic 12C or Weblogic 10.3.1 to 10.3.6 depeding upon your requriement.
3)Please follow the below link where all the Weblogic installers could be downloaded :-
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
   "Accept the License " to download the installers.
4)Regarding License it would be better to check with Oracle SAN for you account or contact Oracle Support depending upon the region you belong to by following the below URL :-
   http://www.oracle.com/us/support/contact/index.html
Regards,
Prakash.

Jsp files: how can i run it on web logic server 6.1?

          I have installed web logic server 6.1 on my machine but i have some trouble to
          run jsp files on it cause if i have a .jsp file in the root directory(where is
          placed index.html default home page) and try to call the .jsp file on the browser
          it appears the source of the jsp. How can i do to compile the .jsp file and return
          the page result on the browser?
          Thank you
          Paolo


Copy JSP file into the
          /applications/DefaultWebApp directory
          In a web browser, request the JSP file using the following URL:
          http://localhost:port/
          Paolo wrote:
          > I have installed web logic server 6.1 on my machine but i have some trouble to
          > run jsp files on it cause if i have a .jsp file in the root directory(where is
          > placed index.html default home page) and try to call the .jsp file on the browser
          > it appears the source of the jsp. How can i do to compile the .jsp file and return
          > the page result on the browser?
          > Thank you
          > Paolo

How to read JMS message properties from BPEL or BPMN process

Hi all,
I have a JMS Adapter that consumes messages from a remote ActiveMQ queue and I don't find the way the get the properties of the JMS message as I would like to map them in BPEL or BPMN process variable. I only manage to get the content of the message.
I've also read that if using a MapMessage, one of the map entry can be mapped directly and that the other map entries go to jca.jms.Map.xxxx where xxxx is key of the map entry.
But how can I map those "jca.jms.Map.xxxx" properties on process variables ? and how to map JMS Properties (that seem to be mapped on jca.jms.JMSProperty.xxxx) to process variables ?
I use SOA Suite version : 11.1.1.4.0
Thanks for your help

SOA Suite 11g - how to set/get JMS headers ?

How to send JMS Message from a BPM Process

Hi All
I have small query regarding sending JMS Message from a bpm process. Is it possible to send JMS message from one bpm process to another bpm process.
I have a scenario in which I need to send a JMS message to a queue where another process is listening on that queue and as soon as the message is received on the queue the process instance is created.
I know how to listen for the JMS message on the queue, but I don't how to send a JMS message from a process.
Also Can I create process by sending the Notification to the process instead of a JMS message. But the process to be created is not a subprocess i.e. Can notification be send accross different processes.
Any information or example in this regard would be helpful.
Thanks in advance
Edited by: user9945154 on Apr 22, 2009 7:46 PM

Hi,
Here's one approach to sending JMS messages from an Oracle BPM process. If you're doing this just to send a message into another process, do not take this approach. It's far easier and quicker if you do this using the OOTB "send notification" logic.
These steps describe how to do this using WebLogic. The steps would be different if you're using another ap server / JMS provider.
1. Guessing you've already done this, but first expose the two required WebLogic jar files for JMS messaging as Java components in the External Resources. The two files for WebLogic are weblogic.jar and wljmsclient.jar” (located in the < WebLogic home directory > /weblogic/server/lib” directory).
AquaLogic BPM JMS Queue Listener for WebLogic 8.1
2. You've probably already done this, but add an External Resource to represent the J2EE container:
• Name: “weblogicJ2EE” - this is important and will be used in the next step
• Supported Type: “GENERIC_J2EE”
• Initial Context Factory: “weblogic.jndi.WLInitialContextFactory”
• URL: “t3://localhost:7001”
• Principal: and Credentials: whatever userid and password you defined to access theWebLogic administrative console.
3. Create the External Resource that represents the send queue configuration. In this example, I'm calling it “WebLogic Send Queue”. This is important - remember what you named it because you will use this name in the logic that sends the JMS message. This new External Resource is configured as:
• J2EE: “weblogicJ2EE” (same name as the second External Resource you created)
• Destination Type: “QUEUE”
• Lookup Name: “weblogic.examples.jms.exampleQueue”
• Connection Factory Lookup Name: “weblogic.examples.jms.QueueConnectionFactory”
4. Here's the logic to send a Message to the Queue
<pre class="jive-pre"><p />msg as String = "Hello World"
jmsMsg as Fuego.Msg.JmsMessage
msg = "<?xml version=\"1.0\"?><Msg>" + msg + "</Msg></xml>"
jmsMsg = JmsMessage(type : JmsMessageType.TEXT)
jmsMsg.textValue = msg
sendMessage DynamicJMS
using configuration = "WebLogic Send Queue",
message = jmsMsg</pre>
Note that the “sendMessage” method uses the configuration parameter “WebLogic Send Queue”. You previously created a JMS messaging service External Resource with this name in the third step.
Again, please don't go this route if you're just using it to send notifications between processes,
Dan

How to send JMS message from oracle to weblogic

Hello,
I am facing with a problem of sending jms message from oracle to weblogic. I am using oracle 10g and weblogic server 9.1. Here is the problem. I would like to create a trigger to send JMS message to weblogic server whenever there is an update in oracle database. So I created a java class that will send a jms message to weblogic server. But in that class I use the jndi from weblogic: weblogic.jndi.WLInitialContextFactory
when I use the loadjava utility to load that class into oracle, the status of that class is invalid though this class is working fine in eclipse with the weblogic.jar included. I was thinking because the jndi from weblogic needs the weblogic.jar in order to work, then I loaded that jar file into oracle (it took about 20 minute to load everything) and everything loaded into oracle from that jar file is invalid and missing some reference.
So my question is: how do I send a jms message from oracle to weblogic using a java class with the right jndi?
Any help will be appreciated.
Thanks
TL

It should be quite straightforward to do this. As stated you need weblogic.jar in your classpath, then use 100% standard JMS calls to publish.
Ensure that you set the following properties before getting your initial context:
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://node:7001 (or whatever)
this will ensure that the correct JMS implementation classes are invoked.
You can't easily (without some mucking around) build a test implementation in an AQ environment and then deploy to WebLogic because in AQ you don't tend to use JNDI lookups (unless you've implemented oracle JNDI etc) but rather use non standard factory class to create connections etc.

ALDSP 3.2 - How to create JMS message from ALDSP

Is there a way to write a jms message from ALDSP?
I want to be able to perform database updates to a database and also write a message to queue in a transaction.
Thanks

As per my understanding only one resource can be non-transactional. In this case it would be the Web Service.If you have n data sources and the first n-1 are transactional and the nth one is not - if you update the first n-1 successfully, and the nth one fails - then you just throw an exception and the updates to the n-1 data sources get rolled back. If an update to one of the n-1 data sources fails you throw an exception and the update to the nth data source never happens. In your case, it's up to you to ensure the updates are executed in the correct order (how you write your XQSE procedure).
Will the call to write a jms message from a Java function in ALDSP participate in the database transaction? DSP doesn't suspend the current transaction when calling a Java function. So yes, the JMS call would participate in the same transaction as the database call.
If you want to dump out the transactionId in your java function in the same format as it appears in the DSP Audit, you can use :
public String byteArrayToHexString(byte in[]) {
StringBuffer out = new StringBuffer(in.length * 2 + 2);
out.append("0x");
for(int i = 0; i < in.length; i++) {
byte ch = 0x00;
ch = (byte) (in[i] & 0xF0);
ch = (byte) (ch >>> 4);
ch = (byte) (ch & 0x0F);
out.append(HEX[(int) ch]);
ch = (byte) (in[i] & 0x0F);
out.append(HEX[(int) ch]);
return out.toString();
}

Error when consuming JMS messages in clustered environment

Hi ,
I have the following setup:
2 ManagedServers configured in a cluster: ManagedServer1a and ManagedServer2.
JMSServer: Configured on ManagedServer1a.
ConnectionFactory : Associated with the Cluster
Queues and Topics : Associated with the JMSServer.
PersistentStore: Associated with ManagedServer1a.
Job Creator deployed on ManagedServer1a
Job Consumer deployed on ManagedServer2.
I see the following exception in the ManagedServer2 logs when it tries to consume the message.
========8<========8<========8<========8<========8<========8<========8<========8<========8<========8<
<Mar 19, 2009 5:01:43 PM IST> <Warning> <RMI> <BEA-080005> <Exception thrown by
rmi server: dispatch
java.rmi.UnmarshalException: error unmarshalling arguments, count=410, lastMethodId15629, lastRequestType9; nested exception is:
java.io.UTFDataFormatException.
java.rmi.UnmarshalException: error unmarshalling arguments, count=410, lastMethodId15629, lastRequestType9; nested exception is:
java.io.UTFDataFormatException
at weblogic.messaging.dispatcher.DispatcherServerRef.invoke(DispatcherServerRef.java:232)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:141)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
Truncated. see log file for complete stacktrace java.io.UTFDataFormatException
at weblogic.utils.io.ChunkedDataInputStream.readUTFFromChunk(ChunkedDataInputStream.java:298)
at weblogic.utils.io.ChunkedDataInputStream.readUTF(ChunkedDataInputStream.java:178)
at weblogic.workarea.spi.WorkContextEntryImpl.readEntry(WorkContextEntryImpl.java:92)
at weblogic.workarea.WorkContextLocalMap.receiveRequest(WorkContextLocalMap.java:151)
at weblogic.jms.common.JMSWorkContextHelper.readWorkContext(JMSWorkContextHelper.java:89)
Truncated. see log file for complete stacktrace
>
<Mar 19, 2009 5:01:54 PM IST> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it during the configured idle timeout of 5 secs>
========8<========8<========8<========8<========8<========8<========8<========8<========8<========8<
I also notice that after this the persistence store appears to be corrupted. I get the exception:
========8<========8<========8<========8<========8<=======
<Mar 20, 2009 2:15:03 PM IST> <Error> <JMS> <BEA-040123> <Failed to start JMS Server "JDJMSServer" due to weblogic.jms.common.JMSException: weblogic.messaging.kernel.KernelException: Unexpected store exception in messaging kernel recovery.
weblogic.jms.common.JMSException: weblogic.messaging.kernel.KernelException: Unexpected store exception in messaging kernel recovery
at weblogic.jms.backend.BackEnd.open(BackEnd.java:999)
at weblogic.jms.deployer.BEAdminHandler.activate(BEAdminHandler.java:196)
at weblogic.management.utils.GenericManagedService.activateDeployment(GenericManagedService.java:239)
at weblogic.management.utils.GenericServiceManager.activateDeployment(GenericServiceManager.java:131)
at weblogic.management.internal.DeploymentHandlerHome.invokeHandlers(DeploymentHandlerHome.java:591)
Truncated. see log file for complete stacktrace weblogic.messaging.kernel.KernelException: Unexpected store exception in messaging kernel recovery
at weblogic.messaging.kernel.internal.PersistenceImpl.recover(PersistenceImpl.java:913)
at weblogic.messaging.kernel.internal.KernelImpl.open(KernelImpl.java:239)
at weblogic.jms.backend.BackEnd.open(BackEnd.java:997)
at weblogic.jms.deployer.BEAdminHandler.activate(BEAdminHandler.java:196)
at weblogic.management.utils.GenericManagedService.activateDeployment(GenericManagedService.java:239)
Truncated. see log file for complete stacktrace
weblogic.store.PersistentStoreException: [Store:280052]The persistent store was not able to read a record.
at weblogic.store.internal.PersistentStoreRecordImpl.getData(PersistentStoreRecordImpl.java:66)
at weblogic.messaging.kernel.internal.PersistenceImpl.recoverHeaders(PersistenceImpl.java:1226)
at weblogic.messaging.kernel.internal.PersistenceImpl.recover(PersistenceImpl.java:888)
at weblogic.messaging.kernel.internal.KernelImpl.open(KernelImpl.java:239)
at weblogic.jms.backend.BackEnd.open(BackEnd.java:997)
Truncated. see log file for complete stacktrace
java.io.StreamCorruptedException: [Messaging:282000]Unsupported class version 48. Expected a value between 1 and 3 inclusive.
================8<================8<================8<================8<================8<
Any clues on why this error occurs? And how to resolve it?

Which WLS version are you using?
CR293674 seems to for issue related to persistent store.
In certain circumstances, the invocation of a WebLogic Web Service configured for reliable messaging will throw the following PersistentStoreRuntimeException error:
weblogic.store.PersistentStoreRuntimeException: [Store:280051]The persistent store was not able to create a new record.
Workaround or Solution:
When starting the WebLogic Server instance to which the reliable Web Service is deployed, set the following property:
-Dweblogic.wsee.exclude.properties=weblogic.wsee.ejb.target
Refer: http://download.oracle.com/docs/cd/E11035_01/wls100/issues/known_resolved.html#wp1056965
-Akshay

How to consume JMS message in oc4j from web logic server 11.1.1.3

Similar Messages

Maybe you are looking for