How to control the jms transactiion in WLI

Hi,
I’m new to WLI integration area; I have JPD which will subscribe message from message broker channel via JMS event generator. i have requirement to put business validation and needs to rollback the message if validation fails with few seconds time delay(Thread. sleep(1000)). Not sure how to handle the JMS transaction explicit in JPD,
Any one have idea how to do the JMS transaction in JPD ?
thanks
Edited by: user650952 on Jul 26, 2009 7:35 PM
Edited by: user650952 on Jul 26, 2009 7:36 PM

I'm not familiar with WLI, but if you're using WebLogic JMS as the source destination, you can configure a "redelivery delay" on the destination and then force a message redelivery.
I assume that your JPD code doesn't have direct access to the javax.jms connection or session? In which case, you might be able to force a message redelivery by rolling back the current XA/JTA transaction (if there is one), or throwing a runtime exception. If the code is running from within an MDB, you can throw a "weblogic.ejb.NonDestructiveRuntimeException" exception to avoid the overhead of the MDB automatically destroying and recreating itself in response to the exception.
Tom

Similar Messages

How to configure the JMS application in WSAD 5.0

hi
i need to configure an JMS application in WSAD 5, but while configuring the application i am checked with intial context exception. but i have configured the jndi in the server. but i cant able to run the application.
can anybody help me like how to configure the JMS application in WSAD (can we configure it without MQ simulator if yes i need the steps)
thanks in advance

Hi,
did you check the WebSphere documentation or ask a question on an IBM forum?
Frank

How to control the data in data selection

Hi,
how to control the data .
in the transfer structure I am having 10 fields and and the file which is to be loaded contains 7 fields only.where can I control the other 3 fields and how .
thanks in advance
karna

If your source file is flat file, add extra three fields with blank (just add field separator say comma for each extra field) and then load. It should be ok.
Hope it helps..

How to load and display the external flv video files in dynamicly and the how to control the flv fil

How to load and display the external flv video files in dynamicly using AS 3.0
and How to control the flv file add the play paus button and add seekbar.
I have using to load the flv file following code
var flvPlaceHolder1:MovieClip = new MovieClip();
var vid1:Video = new Video(734, 408);
flvPlaceHolder1.addChild(vid1);
addChild(flvPlaceHolder1);
flvPlaceHolder1.x = 1059;
flvPlaceHolder1.y = 152;
var nc1:NetConnection = new NetConnection();
nc1.connect(null);
var ns1:NetStream = new NetStream(nc1);
vid1.attachNetStream(ns1);
var listener1:Object = new Object();
listener1.onMetaData = function(evt:Object):void {};
ns1.client = listener1;
ns1.play("GV-1600 TURNING.flv");
ns1.addEventListener(NetStatusEvent.NET_STATUS, statusChanged1);
function statusChanged1(ns1:NetStatusEvent):void
         trace(ns1.info.code);
        if (ns1.info.code == 'NetStream.Buffer.Empty')
             trace('the video has ended');
             removeChild(flvPlaceHolder1);
             //trace('removeChild');
            gotoAndPlay(1786);
then how to add the play,paus ,full screen button    and   seekbar,volumebar.

I have to Create the flash presentation for our company product
In this presentation the left side the text animation are displayed then right side the our product video is displayed.
In this presentation i need the following option :
1, The first product video and animation is finished then the next product is played
2, then the video displayed (size width and height 400x300) , I click this video to increase the size(ex:1000x700)
3, then the playing video i control it play, stop, paus button and volume bar, seek bar.
4, then this presentation is displayed on 42 inches LCD TV so this full presentation is run full screen.
I have finished first two steps 1 and 2
the following are the screen short and code:-
code :-
var count=0;
var flvPlaceHolder2:MovieClip = new MovieClip();
var vid2:Video = new Video(734, 408);
flvPlaceHolder2.addChild(vid2);
addChild(flvPlaceHolder2);
flvPlaceHolder2.x = 1059;
flvPlaceHolder2.y = 152;
var nc2:NetConnection = new NetConnection();
nc2.connect(null);
var ns2:NetStream = new NetStream(nc2);
vid2.attachNetStream(ns2);
var listener2:Object = new Object();
listener2.onMetaData = function(evt:Object):void {};
ns2.client = listener2;
ns2.play("GS-4000.flv");
this.addEventListener(Event.ENTER_FRAME, BtnFadeIn2);
function BtnFadeIn2(event:Event):void
    if (this.currentFrame == 387)
        /*flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        trace('Screen size is changed');*/
        if(count==0)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        count++;
ns2.addEventListener(NetStatusEvent.NET_STATUS, statusChanged2);
function statusChanged2(ns2:NetStatusEvent):void
    trace(ns2.info.code);
    if (ns2.info.code == 'NetStream.Buffer.Empty')
            trace('the video has ended');
             removeChild(flvPlaceHolder2);
             //trace('removeChild');
            gotoAndPlay(433);
flvPlaceHolder2.buttonMode=true;
flvPlaceHolder2.addEventListener(MouseEvent.CLICK,home2);
function home2(e:MouseEvent):void
    if(vid2.width==734 && vid2.height==408)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
    else
        flvPlaceHolder2.x = 1059;
        flvPlaceHolder2.y = 152;
        vid2.width=734;
        vid2.height=408;

How to control the measure based on the related dimension.

Hi Experts,
In order to improve performance, I have created three kinds of time tables in DB,such as Year .Month, Day.
Then import them into the physical layer in RPD, and combine them into one dimension in BMM.
Actually, it has three level fact related with three time tables,so they are also dragged into one fact in BMM,and one column will be corresponding with three column derived from different Fact table in physical layer.
So I want to know how to control the measure based on the related dimension.
For example:
when users drag the Year,Sales column, it will come from Year Dimension and Year Fact Table.
when users drag the Month,Sales column, it will come from Month Dimension and Month Fact Table.
when users drag the Day,Sales column, it will come from Day Dimension and Day Fact Table.

Hi,
Create a dimension Hierarchy, with Year >> Month >> Day Levels and
Next Double click on Year Table LTS >> click on Ocntetnt Tab >> set as Year
same way for Month LTS and Day LTS.
So now when you select year column then server canknow which LTS to hit and Hits Year LTS.
Mark If Helpfu/correct
Thanks.

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How could control the scroll events in ALV OO?

Hello experts!
I'm programing a report, inside there is a field that need time of processing. I'm using ALV OO.
I have thought that it could only calculate the field for the lines that visualize.
How could control the scroll events to calculate the field of the visualized lines?
I'm using CL_SALV_TABLE class and cl_salv_events_table to control the events, but there aren't any event to control the scroll.
best regards!

Hi Sriram,
I did view the information that you was attaching, but this don't resolve my problem. With methods get_scroll_info_via_id and set_scroll_info_via_id, we can get and put information of selection and view rows in the screen but we don't control when the user click in the scroll for advance or to back down a page.
I would like to refresh the data in ALV when the user view news rows.
I want your genial ideas.
Best regards!

How to control the size of SVG images in epub files?

There is unfortunately no support for SVG files in InDesign.
Most of my images in jpg convertes nicely, but the small ones do not.
Therefore I want to use SVG files which I have created in Illustrator.
But how do I set the size in the epub file? Right now, whatever I do, they come out too big and I don't know how to control the size.
Is there a program, like Sigil or other, that can place the image for me - I'm no html wizard you see....

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to control the looping time of the for loop in 10 microseconds in labview?

I need to create a +/- 9 volt square wave with period of 20us using a D/A card (Not NI card). I can write command to the card using outport provide by Labview. Right now, I can generate square wave with 4ms period which is limited by the resolution of the wait until next ms icon I used inside the for loop. Could anyone tell me how to control the execution time of the for loop to about 10 us? Your help would be much appreciated.

I'm not sure if this will hep, but this answer seems to answer this question
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000029410000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=microsecond+resolution+1ms&USEARCHCONTEXT_QUESTION_S=0

HOw to test the jms connection?

HI all,
how to test the jms connection in xi?
regards
kish

HI,
We can see the JMS sender or reciver side .. in RWB .. see communicaiton channel mononitoring,., also..
We can access it through browser.. it depends upon the proocol type .. like sonic or webspeare MQ..or ...
see below links
http://help.sap.com/saphelp_nw04/helpdata/en/cf/886a3c3a860657e10000000a114084/frameset.htm
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/97171dd3-0401-0010-5195-b43f556e6ce9
Chilla

How to control the number of fields in the Advanced mode in af:query

Hi,
How to control the number of fields in the Advanced mode in <af:query>?
Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
How do i control the list of fields in ADDFields button?
Any ideas?
KR

You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

How to control the opening form multiple times

Greetings to all,
I used Open_Form to open the form in my 'Menu.mmb'.
My Question is:
How we control the opening of a form from multiple times?
Ex:
In my menu.mmb I used OPEN_FORM.If we open the form,which was already opened ,I want to stop the form to open. How to do this?
Thanks,
Bhujendra

pls try with
FIND_FORM('EMPDETAILS1');
OPEN_FORM('C:\INH\EMPDETAILS1');
jeneesh

How to control the rounding rule at answer?

Hi grus,
I use the BIEE 11.1.1.6.5.
And I create the 2 answers(A and B) with a same column which setting is same column formula and data format(Treat Numbers As "number", Decimal places "2") on column properties.
Then I run the answer A that the value is 3.68( this column's SQL value is 3.675, so this means rounding up the value)
But I run the answer B with same criteria that the value is 3.67(this means truncating the value)
Why do these difference happen?
How to control the rounding rule?
Best Regards,
Takashi

Hi,
             When add the Itemcode, default warehouse and costing codes (Profit Center) are automatically asign by SAP.
When change the warehouse for this Itemcode, the costing codes(Profit Center) are disappear. I don't want to disappear the costing codes, that's why I try to resign the default costing codes when the warehouse change.
            At SAP 2005, easily access the screen matrix in the marketing document and add the required values in each costing codes columns. But SAP 2007, all costing codes are combined in 1 col and those have the other screen.
          Do you have any idea to control the costing codes?
Thanks and regards,
Lei Nandar Myint

How to control the line-in volume input via LabView?

Anyone know how to control the line-in volume and balance input via LabView?

I assume you are referring to audio line-in volume control and lerft-right balance...
If so, then check out this thread:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000D83A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Look at the info near the bottom from Paul S & Spectre. They talk about "winmm.dll"
-cheers-
JLV

How to control the permission for reports in share folder?

Hi Experts,
In OBIEE 11.1.1.6.0.
I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
How to control the permission for reports in share folder? Thanks for your help.
Note: Dashboard pages have whole sales reports for showing.

Hi User,
1. Give access to the users for all reports.
2. Give No Access to Retail Folder
3. GIve read or full access to dashboard folder.
To set the permission , click on the object/folder bottom left you will find Permission. you set there.
Mark if correct,
fiaz

How to control the jms transactiion in WLI

Similar Messages

Maybe you are looking for