How to control the size of SVG images in epub files?
There is unfortunately no support for SVG files in InDesign.
Most of my images in jpg convertes nicely, but the small ones do not.
Therefore I want to use SVG files which I have created in Illustrator.
But how do I set the size in the epub file? Right now, whatever I do, they come out too big and I don't know how to control the size.
Is there a program, like Sigil or other, that can place the image for me - I'm no html wizard you see....
In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.
Similar Messages
-
How to control the size of Database's image
hi,
I have already saved image in database, & i also can retrieve image from database. But My problem is that when i save big image then it shows with it's original size. But i want to see its size what i want? But how this possible?i want to see it's small size. i cannot do it. I know how to control the image with ImageIO . But i don'nt know how to control the size of an image from database. I cannot do it. Please Help me.
Thanks
binaHi,
You can control the database size at technical setting level based on ur requirement. Field name is Size category.
Thanks. -
How to set the size of an image
hi,
I have a database which contain an image. now i want to retrieve this image & want to show this image in my jsp page as user's defined size. I have following code. My following code shows the original size of an image. Now i want to see different size of this image. How is this possible? I know control the size of this image after saving this image
in a file. but i want to control the size of this image without saving this image in a file? IS it possible ? Is there anybody can help me?
Please help me.
ResultSet rs = null;
PreparedStatement ps=null;
InputStream sImage=null;
byte[] imagebyte=null;
String var;
String name=request.getParameter("RegName") ;
String image =request.getParameter("ImageFile");
out.println(name);
out.println(image);
out.println();
ps=con.prepareStatement("insert into t_image (ID, Image) values(?,?);");
File file =new File(image);
FileInputStream in = new FileInputStream(file);
ps.setInt(1,1234);
ps.setBinaryStream(2,in,(int)file.length());
ps.execute();
rs =stm.executeQuery("select Image from t_image where ID=1234");
if(rs.next()) {
imagebyte =rs.getBytes(1);
response.reset();
response.setContentType("image/jpeg");
%>
<%
response.getOutputStream().write(imagebyte);
%>
<%
response.flushBuffer();
%>With regards
Binahi,
I have a database which contain an image. now i
want to retrieve this image & want to show this
image in my jsp page as user's defined size. I have
following code. My following code shows the original
size of an image. Now i want to see different size
of this image. How is this possible? I know control
the size of this image after saving this image
n a file. but i want to control the size of this
image without saving this image in a file? IS it
possible ? Is there anybody can help me?This has nothing to do with JDBC; you can only store and retrieve the image you have and there's no image manipulation functions in JDBC (nor should there be).
I can see 2 options:
1) serve the image file as is, but in the jsp that writes the html that contains the "<img>" tag that gets it, use the "height" and/or the "width" to scale the suppied image to presentation size you want.
2) find some image manipulation code that will convert the image into the size you want
Option 1 will work well if the problem you have is merely refining the image size for presentation. Option 2 is your only coice if it's the image files size itself you really want to change, not just it's appearance on a page. -
How to control the size of live data in Coherence?
How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+PracticesIn any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded. -
How to decrease the size of an image (CS5)?
I need help with how to reduce the size of an image to fit various smaller sizes. E.g. 135 x 380mm, 254 x254mm etc mounted/matted. Therefore, the image must be made smaller than these sizes without losing quality and any part of the image. I am unable to crop to achieve these sizes since I need the full image. These photos were taken by using a Canon D450 camera and in both RAW & JPEG.
Your help is much appreciated.You may want to use Image > Image size... and dial in the sizes you want.
Set your units to mm in the dialog. Turn off resample and you can adjust the final print size.
What I am showing you is called "scaling", changing the print size without throwing out pixels as resample would do. Your image is intact. This is from CS6, but it should be about the same in CS5.
Gene -
I would like to make a MFC application which loads a DLL generated by LabVIEW application builder. How can I control the size and position of the front panel in my MFC application? Thanks.
Did you build the DLL from Labview yourself? If so, you just add another VI to the list. This VI accepts the Title of a front panel and top,left,right,bottom value of the front panel (VI property WindowBond). I'm not familiar with building DLLs using Labview so I really could not help you on how to build the DLL, but I believe it can be done (multiple VIs as multiple functions in a single DLL).
To get the windows bonds for a vi, you need to use VI server property. Check out the examples under labview directory. There are plenty of them to demostrate how to use this feature.
Joe -
How to control the size of the database
Hi all
Database size will gradually increase day by day is there any tool or possibility to control the size of the database.
Thanks in advance
Gowtham
Moderator message: not directly related to ABAP development, standard "basis" functionality, please have a look in the Netweaver forums.
Edited by: Thomas Zloch on May 23, 2011 9:16 AMHi,
You can control the database size at technical setting level based on ur requirement. Field name is Size category.
Thanks. -
How to decrease the size of an Image in iAD
Hello, there!
I am trying to producer a new slide where I can write text in iAD.
I have problems with it though and can you please tell me how to add new slides, where I can either write text or add new objects or assets?
Also when I try to use the CAROUSEL, I can only put it there, but once I put the asset image on it, it doesnt work - I can't place the image in the center of each boxe and it doesn't go full screen once I click on on it through my iPod Touch (5th Generation).
Please answer me those questions and I would be very happy indeedYou may want to use Image > Image size... and dial in the sizes you want.
Set your units to mm in the dialog. Turn off resample and you can adjust the final print size.
What I am showing you is called "scaling", changing the print size without throwing out pixels as resample would do. Your image is intact. This is from CS6, but it should be about the same in CS5.
Gene -
How to detect the size of an image
Hi,
I have a servlet which grabs an image (jpg or gif) from a BLOB stored in my database and sents the image back to the client through the ServletOutputStream. This all works good and the image is presented nicely. However, I now want to have my servlet detect the size of the image, and if it is too big resize the image and return it.
As I am new to images in JAVA I am unsure how to do this and what tools to use for it. I found some information on JAI, but this seems way to elaborate for what I need. Please let me know if anyone knows how to do this.
Thank you and regards,
Joost SchoutenThis code figures out the size of any object in bytes. I am not sure about resizing the image though..
public int getSerializedSize(Object object)
try
ByteArrayOutputStream baos = new ByteArrayOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(baos);
oos.writeObject(object);
byte[] bytes = baos.toByteArray();
oos.close();
baos.close();
return bytes.length;
catch(Exception e) //not good
e.printStackTrace();
return -1;
}Rishi -
How to control the size of thumbnails in project assets
When i am looking at the thumbnails for project assets, how can i change their size from small to large
I do not believe that there is a way to change the size of the thumbnail display view in PrE 11. If so, I have not been able to find it.
Good luck,
Hunt -
How to extract the size and date from a given file
Hi,
I want to extract the size and date of a file (it can be either a video, audio or text file) that the user points to the location of. But I am not sure how. Does Java have an api that can do this? If not is there some other way of doing this? Can anyone help? Thanks in advance.Have a look at java.io.File, specifically
public long lastModified()
This format returned (I find) is nasty, so then use java.util.Date (or java.sql.Date, look the same on the surface to me) to format it.
Cheers,
Radish21 -
How to define the size of saving image in sm or inch?
Hi,
is it possible to get the image of size defined in sm or inch?
There is no stable proportion between width in pixel and sm.
My purpose is to create a buffered image of defined size ( for example 5x5 sm) and save it. The saving is made with encoder in jpeg.
Thanks and Regards,...didn't find sm in the International System of Units (second � meter ..?)
// Table 1. SI Base Units
Quantity Unit
Name Symbol
length meter m
mass kilogram kg
time second s
electric current ampere A
thermodynamic temperature kelvin K
amount of substance mole mol
luminous intensity candela cd
// Table 2. Examples of SI Derived Units
Quantity Unit
Special Name Symbol Equivalent
plane angle radian rad 1
solid angle steradian sr 1
angular velocity rad/s
angular acceleration rad/2
frequency hertz Hz s-1
speed, velocity m/s
acceleration m/s2
force newton N kg m/s2
pressure, stress pascal Pa N/m2
energy, work, heat joule J kg m2 /s2, N m
power watt W kg m2/s3, J/s
power flux density W/m2
linear momentum, impulse kg m/s, N s
angular momentum kg m2/s, N m s
electric charge coulomb C A s
electric potential, emf volt V W/A, J/C
magnetic flux weber Wb V s
resistance ohm V/A
conductance siemens S A/V, -1
inductance henry H Wb/A
capacitance farad F C/V
electric field strength V/m, N/C
electric displacement C/m2
magnetic field strength A/m
magnetic flux density tesla T Wb/m2, N/(A m)
Celsius temperature degree Celsius C K
luminous flux lumen lm cd sr
illuminance lux lx lm/m2
radioactivity becquerel Bq s-1
// Table 3. SI Prefixes
Factor Prefix Symbol Factor Prefix Symbol
1024 yotta Y 10-1 deci d
1021 zetta Z 10-2 centi c
1018 exa E 10-3 milli m
1015 peta P 10-6 micro μ
1012 tera T 10-9 nano n
109 giga G 10-12 pico p
106 mega M 10-15 femto f
103 kilo k 10-18 atto a
102 hecto h 10-21 zepto z
101 deka d 10-24 yocto yze -
How to control the size and position of the region on a page?
I am trying to create welcome page for my client. I need to create a banner and place the login region in the cente of the page with a fixed width and height. How can I do this.
Thanks.
SatyaHi,
Edit your region and go to region header of your region
and type this
region header
<table width ="100px" height = "100px">
<tr>
<td>
region footer
</td>
</tr>
</table>
you can customize your region position in this way...just use table tag attributes,,i hav egiven example of only height and width but you can use all the table attributes to customize your region like background color,back ground image,alignment etc..
hope this helps you,
Regards,
Jitendra -
How to get the size of an image?
yhanks
try something like:
// in case 'this' is a JComponent or something similar:
MediaTracker mt = new MediaTracker(this);
mt.addImage(myImg1, 1);
mt.addImage(myImg2, 2);
while (!(mt.checkAll(true))) {
try {
Thread.sleep(10);
} catch (InterruptedException iex) { }
// all loadedThis would load all images registered with the MediaTracker but also blocks execution of your program. You might want to start a different thread for this.
cheers,
kelysar -
How to conrol the size of Node Manager error logs
How to control the size of Node manger error.logs in Weblogic 8.1?
Log rotation is disabled by default, but can be enabled by setting LogLimit and LogCount in nodemanager.properties
For more information check [http://download.oracle.com/docs/cd/E11035_01/wls100/nodemgr/java_nodemgr.html]
I hope this helps
Maybe you are looking for
-
Re: I have backed up my computer but can't retrieve photos or music
I am having the same problem. I have a new hard drive and trying to restore my iPhoto Library from backup. I have moved, copied, renamed, and even "selected new library". When it links to the new library, there are "no photos" in iPhoto. I can se
-
Gnome has been crashing randomly for the past 2 weeks and I finally am so tired of it so I posted this. It will just randomly fallback to gdm. Here is my Xorg.5.log. I hope you can make sense of what's going on. It seems like something about screens
-
Hi, I seem to be having problems generating the business blueprint, we are doing an HCM project and i have defined the following in SOLAR01 1. Organizational Units 2. Master Data 3. Business Scenarios under the business scenarios, i have assigned the
-
We have started importing our hundreds of CDs into iTunes. Problem is, iTunes is giving every Classical CD the same title, copying the title of the first Clasical CD we imported. Any suggestions?
-
Pages won't close windows when I quit it since I upgraded to lion.
Ever since I upgraded to lion, whenever I open pages all the previous pages i was working on opened. It won't allow me to close them before quitting out of it, whenever I try to close them the system just ignores it. Also the mouse cursor has been di