How to control the role in portal with SRM7.0

HI ,My expert :
I work in SRM 7.0 with EP.
I want to control the ROle about the business partner manage .In the portal ,some user can edit the business partner data ,however the other can only display the data .In this case ,I do not how to control ? dispaly the role in SRM or portal ?
BestRegards!
Alex!

hello
authorizations are made on SRM; create roles z in SRM and subsequently assigned to a group role-z also. But the authorization in SRM.
Best regards.
José Luis

Similar Messages

How to Control the Valves and Pump with Labview?

I have started a new project where I have to control the valves operation through Labview 2009,using PXI 1031, NI 5105(Digitizer) and NI 6251(M-series DAQ).
The valves I need to control using the labview are:
a) Pressure Reducing Valve (open & close)
b) Remote control Valve(On & Off) with in-built actuator
c) Flow control valve(open, semi open, partially open, semi close, partially close, fully close), 1%, 2%, 3%..etc
d)saftey valve (opening closing depending on increase in pressure from certian limit)
I hav eto control
a) Hydraulic pump operation with in built gear-box
Please let me know, how should l develop the VI for all? How to get started?, any helpful links? If there is any example code?
Its little urgent !

If you are not familiar with LV, I would suggest you go through the tutorials. Then take the leap and figure out how to use Action Engines and State Machines (search any of the terms I used that don't understand, there are a zillion threads on them).
Then...
Sit down and write stand-alone testers for each of the widgets you are going to control monitor etc.
These testers will give you an idea if they really work the way you think, their character, and will serve as a "Sanity Check" when you think you are going crazy durring development.
THen integrate the tester so they can all work at the same time. This will become a utility screen that will serve you well when maintaining the critter latter in its life.
Only then...
write out a complete set of state diagrams that describe what you plan to do (don't cheat! ) and walk through them in your head until you are cetain it will all work blah blah blah.
This step is optional but highly recomened...
Compose a detailed set of documemtns describing what you have in mind and post them here (include the images, they will get many mor readers) and let people pick aprat your design.
When you have a final design, use everything you learned along the way to be a kick-ass developer.
Along the way post distinct well defined question on this site and as long as it looks like you are trying someone will probably reply and get you going again.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Af:ConvertDateTime how to control the year to start with 19xx or 20xx

Hi,
I am facing an issue. I have a af:inputDate component with af:convertDateTime with pattern MM/dd/yyyy and secondary pattern= MMddyyyy.
The issue is when the date is entered as 101147 the date gets converted to 10/11/2047 but the user wants it to be converted to 10/11/1947
Th requirement is if the two digits entered for year(yy) is less than the last two digits current year(2011) the year should be 20yy else it should be 19yy
example: if entered date is 052104 it should get converted to 05/21/2004
if entered date is 062198 it should get converted to06/21/1998
if the entered date is 07132009 it should be 07/13/2009 (no conversion here)
if the entered date is 07131986 it should be 07/13/1986 (no conversion here)
Kindly reply

This one is a tricky problem - a side-effect of JSF doing a lot of things automatically is that sometimes it does too much.
I don't have a great solution, but here's a couple of ideas:
(1) Try using multiple <h:form>s on your page (not nested one inside the other, but separate). Data will only get updated in the form that contains the button that got pressed.
(2) Use an intermediate model layer, and discard updates as appropriate.
Neither of these are beautiful solutions - the second is way ugly - but they might help. Long-range, I'd love to see something like "subforms" supported in JSF that can provide finer grained control over what gets processed (validations, model pushes, etc.) and what doesn't without resorting to the blunt hammer of multiple HTML forms.
I'm a little confused about "the model is updated with the value of the components whenever the form is submitted, and regardless of whether the value of the components has changed or not.", because JSF is checking the old value and using ".equals()" to see if its changed. Note, however, that it's not caching the old value across the request, but simply going back to the model on the subsequent request, which may (or may not) explain the behavior you're seeing.
-- Adam Winer (EG member)

How to assign the role for created user thru dynpro App

Hi All
How to assign the role for currently created user from Webdynpro App.
when i enter into the portal after creating the user
i am getting the following messgae in the portal
"No portal roles are assigned for this user.If this problem persists, contact your system administrator."
how to assign the user defined role for the created user from dynpro App
Regards
Dhina Kar J
Edited by: Dhinakaran Jeyachandran on Feb 1, 2008 12:19 PM
Edited by: Dhinakaran Jeyachandran on Feb 1, 2008 12:35 PM

In the User Administration section of your portal find your newly created user and below select "Assigned Roles" tab then press <Modify> button and look through available roles on portal then just simply add and save. But if you want to do it programmatically see below:
IUserAcountFactory userFactory = UMFactory.getUserAccountFactory();
// IUser - read only but with IUserAccount is possible to set up user data
IUserAccountSearchFilter userFilter = userFactory.getUserAccountSearchFilter();
userFilter.setLogonUid("superuser", ISearchAttribute.LIKE_OPERATOR, false);
ISearchResult sr = userFactory.search(userFilter);
for (final Iterator i = new PrincipalIterator(sr); i.hasNext();) {
IUserAccount user = (IUserAccount) i.next();
Execute the same search for IRole (or IGroup if needed) get the unique id of them and use newRole(...) and addUserToRole(...) methods from IRoleFactory.
Of course you don't need search for this principals if you know uniqueness of them. Use appropriate factories to get'em all by this unique id.
All the features see in [javadocs|http://help.sap.com/javadocs/NW04S/current/se/index.html]

How to control the data in data selection

Hi,
how to control the data .
in the transfer structure I am having 10 fields and and the file which is to be loaded contains 7 fields only.where can I control the other 3 fields and how .
thanks in advance
karna

If your source file is flat file, add extra three fields with blank (just add field separator say comma for each extra field) and then load. It should be ok.
Hope it helps..

How to control the measure based on the related dimension.

Hi Experts,
In order to improve performance, I have created three kinds of time tables in DB,such as Year .Month, Day.
Then import them into the physical layer in RPD, and combine them into one dimension in BMM.
Actually, it has three level fact related with three time tables,so they are also dragged into one fact in BMM,and one column will be corresponding with three column derived from different Fact table in physical layer.
So I want to know how to control the measure based on the related dimension.
For example:
when users drag the Year,Sales column, it will come from Year Dimension and Year Fact Table.
when users drag the Month,Sales column, it will come from Month Dimension and Month Fact Table.
when users drag the Day,Sales column, it will come from Day Dimension and Day Fact Table.

Hi,
Create a dimension Hierarchy, with Year >> Month >> Day Levels and
Next Double click on Year Table LTS >> click on Ocntetnt Tab >> set as Year
same way for Month LTS and Day LTS.
So now when you select year column then server canknow which LTS to hit and Hits Year LTS.
Mark If Helpfu/correct
Thanks.

How could control the scroll events in ALV OO?

Hello experts!
I'm programing a report, inside there is a field that need time of processing. I'm using ALV OO.
I have thought that it could only calculate the field for the lines that visualize.
How could control the scroll events to calculate the field of the visualized lines?
I'm using CL_SALV_TABLE class and cl_salv_events_table to control the events, but there aren't any event to control the scroll.
best regards!

Hi Sriram,
I did view the information that you was attaching, but this don't resolve my problem. With methods get_scroll_info_via_id and set_scroll_info_via_id, we can get and put information of selection and view rows in the screen but we don't control when the user click in the scroll for advance or to back down a page.
I would like to refresh the data in ALV when the user view news rows.
I want your genial ideas.
Best regards!

How to use the eventing and databag with a WAS 6.20 ?

How to use the eventing and databag with a WAS 6.20 ?
Is what there is a good guide for these services?
Thank's

In the raise event you can pass the value
like below.
<SCRIPT>
function raiseEvt(value1){
if(window.document.domain == window.location.hostname){
if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
   EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
// alert('tree domain'+document.domain);
</SCRIPT>
and in the
subscribe event you can get the values like below.
<script language="javascript">
if(window.document.domain == window.location.hostname){
document.domain = document.domain.substring(document.domain.indexOf('.')+1);
    EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
function myreceiveEvent( eventObj ) {
      document.forms[0].gp_hidden.value = eventObj.dataObject;
</script>
Also look at the following link for a complete documentation.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
Regards
Raja

How to control the looping time of the for loop in 10 microseconds in labview?

I need to create a +/- 9 volt square wave with period of 20us using a D/A card (Not NI card). I can write command to the card using outport provide by Labview. Right now, I can generate square wave with 4ms period which is limited by the resolution of the wait until next ms icon I used inside the for loop. Could anyone tell me how to control the execution time of the for loop to about 10 us? Your help would be much appreciated.

I'm not sure if this will hep, but this answer seems to answer this question
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000029410000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=microsecond+resolution+1ms&USEARCHCONTEXT_QUESTION_S=0

How to control the number of fields in the Advanced mode in af:query

Hi,
How to control the number of fields in the Advanced mode in <af:query>?
Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
How do i control the list of fields in ADDFields button?
Any ideas?
KR

You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

How to control the opening form multiple times

Greetings to all,
I used Open_Form to open the form in my 'Menu.mmb'.
My Question is:
How we control the opening of a form from multiple times?
Ex:
In my menu.mmb I used OPEN_FORM.If we open the form,which was already opened ,I want to stop the form to open. How to do this?
Thanks,
Bhujendra

pls try with
FIND_FORM('EMPDETAILS1');
OPEN_FORM('C:\INH\EMPDETAILS1');
jeneesh

How to control the rounding rule at answer?

Hi grus,
I use the BIEE 11.1.1.6.5.
And I create the 2 answers(A and B) with a same column which setting is same column formula and data format(Treat Numbers As "number", Decimal places "2") on column properties.
Then I run the answer A that the value is 3.68( this column's SQL value is 3.675, so this means rounding up the value)
But I run the answer B with same criteria that the value is 3.67(this means truncating the value)
Why do these difference happen?
How to control the rounding rule?
Best Regards,
Takashi

Hi,
             When add the Itemcode, default warehouse and costing codes (Profit Center) are automatically asign by SAP.
When change the warehouse for this Itemcode, the costing codes(Profit Center) are disappear. I don't want to disappear the costing codes, that's why I try to resign the default costing codes when the warehouse change.
            At SAP 2005, easily access the screen matrix in the marketing document and add the required values in each costing codes columns. But SAP 2007, all costing codes are combined in 1 col and those have the other screen.
          Do you have any idea to control the costing codes?
Thanks and regards,
Lei Nandar Myint

How to control the movie player in iPhone SDK 2.0?

Hello, everybody!
With the third beta version of iPhone SDK I finally played a movie with the example from the manual. But I need to seek in the movie and control the playing process. With the MPMoviePlayerController class this is impossible, because it has four properties (backgroundColor, contentURL, scalingMode, userCanShowTransportControls) and only three instance methods (initWithContentURL, play, stop). The notifications are two (MPMoviePlayerScalingModeDidChangeNotification, MPMoviePlayerPlaybackDidFinishNotification). How can I know what is the current position of the head and how can I change it? I can't find other classes, which can play a movie. Can somebody help me?
Stefan

HeoU wrote:
Hi Tsvyatkov,
Do you HAVE [these problems|http://discussions.apple.com/thread.jspa?threadID=1486343&tstart=0] while playing video playback?
- The keyboard doesn't appear after playing the video (It works great before playing the video)
- When you play the video, iphone simulator turns in paysage mode. Then when you stop it, it doesn't turn back (SDK beta 3). It worked fine with the SDK beta 1, 2.
- If you chose a video from a list (UITableView) and you stop the video, then come back to the list, the item is still selected with the blue color.
thanks
HeoU
Yes! I have the same problems! And with the older versions of iPhone SDK I didn't.

How to find the "role" in forms 6i

I need to find what roles does a user has from forms (roles such as "admin, reguser...etc...roles that i created"
For example, i can find the following but i don't how to get the "roles"
DECLARE
UN VARCHAR2(80);
PW VARCHAR2(80);
CN VARCHAR2(80);
BEGIN
:global.UN := GET_APPLICATION_PROPERTY(USERNAME);
:global.PW := GET_APPLICATION_PROPERTY(PASSWORD);
:global.CN := GET_APPLICATION_PROPERTY(CONNECT_STRING);
End;
Thank you in advance.

Hello,
I made it in the following way:
I have several roles that are granted to the user but
are not default_roles. That means they must be enabled
with the application.
declare
cursor c1 is select
GRANTED_ROLE from user_role_privs
where default_role = 'NO';
rolen_name varchar2(30);
rolen_alle varchar2(2000);
i number := 0;
BEGIN
open c1;
loop
     fetch c1 into rolen_name;
     exit when c1%NOTFOUND;
     i := i+1;
     if i = 1 then
     rolen_alle := rolen_alle || rolen_name;
     else
     rolen_alle := rolen_alle || ',' || rolen_name;
     end if;
end loop;
close c1;
if i >= 1 then
DBMS_SESSION.SET_ROLE(rolen_alle);
end if;
END;

How to control the canvas of the ADF Read-Only Form

Hi
Could you give an idea of how to control the canvas of the fields in ADF Read-Only form. My requirements are as follows
1) ALL the labels has to left justified irrelevant of their length
2) ALL the values also has to left justified and should be wrapped if it exceeds some length.
3) I want to show the results in more than one column with proper alignment as mentioned above.
Thanks in advance.
Sivaji.......

Sivaji,
There is a "rendered" attribute on the af:table component. You can write EL to pragmatically control the evaluated value of expression to set the visibility.
Assuming you are using BC for your middle layer you can do something like the following:
<af:table ...
rendered = #{YourDetailViewObject.somestring.inputValue != null}
..>
Z

How to control the role in portal with SRM7.0

Similar Messages

Maybe you are looking for