How to convert .dts packages to SSIS packages

Hi,
How do you convert .dtsx packages to SSIS packages.

sorry Tom, I mark it and than i saw that this is the same link as
Shanky_621 posted several hours ago, so I Unpropose as answer.
* This look like a good answer, but it was already given as mentioned :-)
[Personal Site] [Blog] [Facebook]

Similar Messages

  • How to execute external exe in SSIS Package

    Hi,
    I wanted to know how to execute external exe from SSIS Package can any one explain me or provide me valuable links.
    Regards ,
    Ajay

    There are few things you need to take care before executing exe from SSIS
    1. The arguments etc expected by exe should be clearly defined inside execute process task
    2. The Path where exe exists should be accessible to the account executing the package. SO you should grant account required permissions
    3. If executing from a job make sure you either define a proxy account with required permissions and configure it to run the job or give service account all access required for executing exe
    see
    http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • [Solved] How to adjust parameters of an SSIS package in SQL Server when using an SSISDB execution Script (=SP)

    Hello,
    I created a package in Visual Studio Integration Services, where it runs successfully.
    I then deployed it to SQL server 2012. Here to it runs successfully, too.
    Then I changed the script in that I exchanged two variables for two parameters - doing the same thing.
    I noticed that in VS no dialog window comes up where I could change the value of the parameters; here obviously I am expected to set them in Visual Studio.
    However, in SQL Server 2012 the dialog window does come up when I execute the package. I can then change the value of my two parameters and the package runs OK, giving me the expected results.
    Now I created a script in SQL Server from which to execute the package. Do I have to change the script every time when I want it to run with different values for the parameters?
    So far I have not even found how to feed different values for the parameters into the package by using the script. Or could I tell the script somehow to bring up the dialog window for changing the parameters?
    How can I set/change the package parameters by using an SSIS execution script in SQLserver?
    Or how could I bring up the dialog window thru the script?
    Would s.o have an example?
    Help is greatly appreaciated. 
    Thank you
    Andreas

    Hi,
    I found out by myself and leave the answer here should s.b. else wonder about the same issue.
    Look at this:
    Declare
    @var0 sql_variant
    = 1
    Exec
    [SSISDB].[catalog].[set_execution_parameter_value]
    @execution_id,
    @object_type=30,
    @parameter_name='MaxPosition',
    @parameter_value=@var0
    Declare
    @var1 nvarchar
    = 'x'
    Exec
    [SSISDB].[catalog].[set_execution_parameter_value]
    @execution_id,
    @object_type=30,
    @parameter_name='NameContains',
    @parameter_value=@var1
    Now, what is important and was not evident to me is:
    1) The variable you use for the parameters - here var0 and var1 must match in their data type the corresponding parameter used in the package.
    2) The @parameter_name must match the corresponding parameter name in the package.
    3) The value that is being passed to the respective package parameter is the value you specify in the Declare statement. So in my case a string x and an int 1 is used.
    4) Of course the @object_type must be set to 30 for package parameters 
    Then the script runs the package with adjusted parameters.
    To many this might be evident, to me it was not.
    Cheers
    Andi
    Andreas

  • Trying to understand how to make a change to a SSIS package

    I was pretty familiar with DTS packages but SSIS packages have me completely lost.
    Let me start by saying we use TFS (Team Foundation Server) and Visual Studio 2010 for source control and development.
    I have to make a change which is very simple. I have to add a new field to an export file.
    My problem is I dont know what SSIS is or what all the components mean and what they are used for. I have no clue where to make this change. Does SSIS have any concept of 'source code'. How would an export file layout be defined and where would I look for
    it? I have read something about a 'manifest file' but again I don't know what it is or what it is used for or where I could find it.
    I have to make this change in TFS via Visual Studio but I don't see anything in the solution that looks like the SSIS stuff I need. If it is not there, I need to find it (on the production server maybe?) and add it to TFS.
    Is there a good online tutorial that explains all this? I tried the Microsoft ones and they are impossible to follow since they consist of dozens of links that completely tie you in knots.

    As of SQL Server 2012, SSIS catalogs are used for package version control, management and execution. Packages can be recovered from the catalog for edition and redeployment. It doesn't have a "source code". Which version of SQL Server are you using?
    Please note that your questions are kind of comprehensive and generic. There are no single formulas for package edition. Wether adding a new column to your file layout will be transparent to the package depends on its implementation and flow. As a general
    rule, you'll have to manually add the new column to each input and output of each source, transformation and destination tasks in your data flow.
    Follow these instructions to download a package from your SSIS catalog in SQL Server 2012. I think its the same process for SS 2014.
    http://www.mssqlgirl.com/editing-published-ssis-package-in-sql-server-2012.html

  • How do I join two tables in the same database and load the result into a destination table in a SSIS package

    Hi,
    I have a query that joins two tables in the same database, the result needs to be loaded in a destination DB table.  How do I do this in SSIS package?
    thank you !
    Thank You Warmest Fanny Pied

    Please take a look at these links related to your query.
    http://stackoverflow.com/questions/5145637/querying-data-by-joining-two-tables-in-two-database-on-different-servers
    http://stackoverflow.com/questions/7037228/joining-two-tables-together-in-one-database

  • Multiple OLE DB connection managers to the same database instance in a SSIS package

    Hi,
    While migrating DTS package to SSIS package, I came across one which had multiple OLE DB connection managers all connecting to the same Oracle schema in the same instance.
    There are that many execute SQL task corresponding to each of these connection managers.
    Each of  these SQL task call different Oracle stored procedures and executes them in the same schema in the same instance.
    My question is, is there any particular reason or advantage in having multiple connection managers?
    Can't we have one single connection manager and use the same in all of these SQL tasks?
    Does multiple connection managers provide any added advantage like parallelism or something?
    In this particular case, there are no actual workflows, rather each of these SQL tasks are stand alones. But there are other packages which has SQL tasks in workflow but still each of them calling separate connection managers all calling the same schema
    in the same instance.
    Thanks for your time.
    Cordially, Biju George

    Well like I said, each of  these SQL task calls "different" Oracle stored procedures even though executes them in the same schema in the same instance. I tried a sample testing by creating two separate packages, one with only one single
    OLE DB connection referred in all of the SQL tasks and in the other one with mutiple OLE DB connections to the same schema in the same instance each of which is referred in each of the SQL task in one to one mapping.
    Now the first one created one session in Oracle but the later created as many sessions as there where OLE DB connection managers. The first one took longer to complete than the second one since second one created independent sessions and executed those procedures
    sort of parallely.
    I guess that can be called an advantage of creating multiple connection managers to the same schema in the same instance.
    Cordially, Biju George

  • How to unzip a file in ssis

    Hi All,
    i have a requirement files are coming to ftp.But those files are Ziped.
    I want to unzip it and at last want to archive it to some other folder.
    Please suggest how it can be done through SSIS package.I am using sql server 2005.
    Thanks
    i_pr

    Here is a link that will be useful to you -
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/b3989206-99e3-49dd-9c8a-1cd5de89cb5d/unzip-file-in-ssis-package?forum=sqlintegrationservices
    If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

  • Upgrade Preparation: How to map applications, DTS packages, SSIS packages and reports to databases

    Hi,
    I am on the initial phase of upgrading SQL Server 2005 to SQL Server 2012. Right now, I'm taking as much inventory as I can from our current server, SQL Server 2005. If anyone could help me, how can I map the following:
    Map applications to databases
    Map DTS packages to databases
    Map SSIS packages to databases
    Map reports to databases
    Thank you!

    Some questions and suggestions:
    How are we planning to upgrade whether in-place\parallel\others?
    Will this be with HA[Clustered one] or with standalone?
    Do you have time to do actual migration from now on and you will need to setup the environment for end to end testing for application validation so that all differences between application or system variables can be known before actual deployment?
    Also, it will be good to check with Upgrade Advisor for below pointers preparedness too.
    Map applications to databases: If you have already need to setup databases and logins for each and every applications then your mapping to database for applications will be lot  easier and you will have less challenge.
    Map DTS packages to databases: Good link to check
    https://www.simple-talk.com/sql/ssis/dts-to-ssis-migration/
    Map SSIS packages to databases: Good link to check
    http://www.experts-exchange.com/Database/MS-SQL-Server/Q_28340818.html http://www.sqlservercentral.com/Forums/Topic1531839-2799-1.aspx
    Map reports to databases -- Good link for Reporting Services if you meant that:
    http://msdn.microsoft.com/en-us/library/ms143747.aspx
    http://www.mssqltips.com/sqlservertip/2627/migrating-sql-reporting-services-to-a-new-server/
    Good link to check other thing as well :
    http://thomaslarock.com/2013/03/upgrading-to-sql-2012-ten-things-you-dont-want-to-miss/
    Santosh Singh

  • How to build SSIS package for SAP BPC 5.0

    Is the above how paper apply to BPC 5.1?
    I also have two questions:
    1.As we know in the Data Manager 5.1 user guide indicate that we use DTS to manage  SQL Server 2000 packages,and  SSIS  to manage  SQL Server 2005 packages.
    Also in the guide, when it discuss about the data manager package, it only reference DTS, is all the DTS package discussed in that guide apply to SSIS?
    2. from BPC 7.0 NW, the BPC is part of NetWeaver , what role SSIS is play here, since we know that a lot of customer of not use SQL Server  as their database.

    Hi JW,
    The answer to your question #2 is that we won't have SSIS packages in BPC7NW since all SQL server based functionality won't be there in Netweaver version. If you use migration tools to migrate from BPC5.x to BPC7NW, it can convert SSIS packages. However any custom SSIS code would have to be converted manually. For more information, please read Ryan's blog at SAP's definitive strategy for planning technologies moving forward: What's the word on BPC, BI-IP and SRC?
    Regards
    Pravin

  • Need to convert DTS packages to SQL Server 2012 environment.

    Hi Friends,
    As Part of the Project Requirement,we need to convert DTS packages to SQL Server 2012 environment.
    Please sugest me best approach.
    Thanks

    Best approach is to re-design the packages in SSIS 2012 directy if it is feasible. Because most of the DTS feaures are discontinued and also you will have to clean up all errors that you are going to get after migration.
    Discontinued Integration Services Functionality in SQL Server 2012
    Otherwise you need to migrate it first to 2008R2 and then 2012 version.
    Below ones would be helpful for you:
    Migrate DTS packages to SSIS (SSIS2008R2)
    Support of DTS packages in 2008 R2
    Known DTS Package Migration Issues
    Cheers,
    Vaibhav Chaudhari

  • Multiple Convert/Dump and Load tasks in a single SSIS package?

    I'd appreciate some input. We have a single data file that has about 1,000,000 rows of data spanning 28 time periods in the columns across each row. The file is too large to import at one time, and so we have created 9 different transformation files to pull subsets of the timeperiods using MVAL. The end user does not want to have to break apart the file and/or schedule 9 separate imports to bring this file in each time. So, I've attempted to create a single SSIS package that runs each of the 9 required component imports, but I'm running into the following error any time that I try to run more than one import at once:
    An error occurred while running a packageException of type 'System.OutOfMemoryException' was thrown.
    I've tried using a ForEach loop to simply loop through each of the transformation files and run an import for each transformation file it finds. But, I understand that SSIS doesn't release memory until the end of the ForEach loop, which would explain an out of memory issue. I then broke it out and specified 9 distinct Convert task and 9 distinct Dump and Load tasks in the package with an order of Convert 1 --> Dump and Load 1 --> Convert 2 --> Dump and Load 2, etc. This results in the same out of memory issue any time I enable it to run more than 1 convert/dump & load task in the package - they are not running simultaneously, but rather sequentially. I don't understand this. In looking at the logs, it looks like it's creating the temp files for the first import and adding them into BPC, and then creating the temp files for the second import but then fails prior to the second load. This will work for a smaller data file, but shouldn't the memory be released after the task and allow subsequent tasks to complete? Any recommendations on how to address this and automate this load?

    Quick update - I created unique ssis packages for the distinct imports and called those packages from within the initial package that is kicked off through Data Manager, and I ran into the same out of memory issue. Any ideas, suggestions, or help would be greatly appreciated.
    Thanks!
    Josh

  • [Forum FAQ] How to get SSIS packages XML definition which are stored in SQL Server Integration Services instance

    Introduction
    Integration Services gives you the ability to import and export packages, and by doing this change the storage format and location of packages. But after import packages into package store, how can we get the package XML definition?
    Solution
    As we know, SSIS packages are stored in msdb using existing SSIS storage table([msdb].[dbo].[sysssispackages]). The “packagedata” column store the actual SSIS package with Image data type. In order to get the package XML definition, we need to convert “packagedata”
    column through Varbinary to XML. You can refer to the following steps:
    Using the following query to get package GUID:
    SELECT [name],
                [id]
      FROM [msdb].[dbo].[sysssispackages]
    Using the following query to convert packagedata column to XML: SELECT id, CAST(CAST(packagedata AS VARBINARY(MAX)) AS XML) PackageDataXML
    FROM      [msdb].[dbo].[sysssispackages]
    WHERE id= 'ABB264CC-A082-40D6-AEC4-DBF17FA057B2'
    More Information
    sysssispackages (Transact-SQL):
    http://msdn.microsoft.com/en-us/library/ms181582.aspx
    Applies to
    SQL Server 2005
    SQL Server 2008
    SQL Server 2008R2
    SQL Server 2012
    SQL Server 2014
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hi Ketak. Thank you for replying. I already followed your instructions - specifically -
    You do not see the SQL Server Reporting Services  service in SharePoint Central Administration after installing SQL Server 2012 SSRS in SharePoint mode
    I get the following error when I run rssharepoint.msi on the APP sever (where Central Admin is installed). I have to run this other wise
    Install-SPRSService and Install-SPRSServiceProxy 
    are not recognized as commands on that server.
    Failed to call GetTypes on assembly Microsoft.AnalysisServices.SPAddin, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Could not load file or assembly Microsoft.AnalysisServices.SPClient, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
    or one of its dependencies. The system cannot find the file specified.
    macrel

  • How to insert CLEAR SSIS Package in another SSIS Package

    Hi All,
    We have a requirement to run CLEAR SSIS Package in another SSIS Package whish extracts data from Oracle database system. Needed to run CLEAR SSIS Package if data exists in BPC application else run extract to Oracle system. Basically continue with SSIS Package and extract to Oracle system.
    In Outlooksoft 4.2 we didn't have any issue, since all evModify is going to be in DTS Package and we didn't have any issues in placing a condition connection to CLEAR Package. Basically we were running CLEAR Package inside anther DTS Package twice successfully.
    When we tried to create same functionality in SAP BPC 5.1, the code from EVMODIFY not doing correctly in executing the CLEAR inside another SSIS Package.
    If any body knows how to create  SSIS Package with a combination of 2 or more SSIS Packages by taking above scenario, please let me know.
    The basic requirement is, how do we include a SSIS Package in another SSIS Package and use EVMODIFY to run this meta package in SAP BPC 5.1 environment.
    Any information would be appreciated.
    Regards,
    Sreekanth.

    Yes, I have the job , and tried running this, Looks like it started executing.  Will update in next 5 mins if it runs fine.
    Looking at the command it generated, it looks like it is setting few more parameters like LoggingLevel, Synchronized , callerInfo etc.. I believe these should be optional right?
    Also now I have to set two Parameters out of 10 parameters the project takes, If I add additional /Par Project.starttime , will the package pick the values passed from this prompt?
    /ISSERVER "\"\SSISDB\FFF\PPP\Xpackage2.dtsx\"" /SERVER "\".\"" /Par "\"$ServerOption::LOGGING_LEVEL(Int16)\"";1 /Par "\"$ServerOption::SYNCHRONIZED(Boolean)\"";True /CALLERINFO SQLAGENT /REPORTING E

  • How to Run 2012 SSIS packages on 2008R2 Version

    HI Friends,
    I have scheduled a job to run 2012 SSIs packages on 2008R2. I am getting this error can you please Give any ideas how can I run them without converting!
    ERROR Is :
    Package migration from version 6 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number."

    Hello,
    There is backward compatibility in SSIS but no forward compatibility, meaning, when 2008 R2 is developed they were aware of all versions less than 2008 R2 and included execution scenarios , this is backward compatibility
    while 2008 R2 is being developed , 2012 is not yet developed. so we cannot execute a 2012 package on 2008 R2 Server where vice versa is possible 
    Correct.
    The "backwards compatibility" is implemented by SSIS upgrading older versions of packages to the current version of SSIS when executing. If the upgrade fails, you're out of luck.
    MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

  • How to make SSIS packages automatically read the input file from a path?

    Currently I am using a SSIS package to read data from a .dat file and load it into SQL Server tables.
    I am placing the input .dat file on the desktop. In the connection manager -> Browse option, I am pointing this file to create connection.
    The file naming convention is like - aSNAP_Data_20140926_P-2014-09-26_07.02.36
    However, I need the SSIS package to automatically read the input file from a folder which is located in a remote server. This folder has lots of files where input files are added on a daily basis with the date value in the file name as mentioned above.
    I want to schedule the SSIS package to run daily and take the latest file in the folder based on the date.
    Please let me know how to do it. Any help would be highly appreciated.....
    Thanks in advance.

    Hi SQL_SSIS_Dev,
    According to your description, you want to get the latest file from a path to a SQL Server table. After testing the issue in my environment, we can refer to the following steps to achieve your requirement:
    Create two variables, VarFolderPath stores the folder path in which our files exist, VarFileName hold the value of most recent File Name.
    Drag a Script Task from SSIS Toolbox to Control Flow Pane, then select “User::VarFolderPath” as ReadOnlyVariables, select “User::VarFileName” as ReadWriteVariables.
    Then Edit Script with the C# code below:
    Add “using System.IO;” into namespace.
    Add the code below under Main function:
    var directory= new DirectoryInfo(Dts.Variables["User::VarFolderPath"].Value.ToString());
                FileInfo[] files = directory.GetFiles();
                DateTime lastModified = DateTime.MinValue;
                foreach (FileInfo file in files)
                    if (file.LastWriteTime > lastModified)
                        lastModified = file.LastWriteTime;
                        Dts.Variables["User::VarFileName"].Value = file.ToString();
    Drag a Data Flow Task to Control Flow Pane and connect to Script Task.
    In the Data Flow Task, drag a Flat File Source with a file in the source folder as all the files have same structure as the File name.
    Add the property below the Flat File Connection Manger expression:
    Property: ConnectionString      Expression: @[User::VarFolderPath] +"\\"+ @[User::VarFileName]
    Drag an OLE DB Destination that connect to the Flat File Source, then configure a table to store the data.
    The following screenshot is for your reference:
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for