How to convert high_value to date data type on dba_tab_partitions

I just want to query and get the max date available on the dba_tab_partitions for the high_value field.
high_value data type is LONG it has the value for Partition bound value expression.
For example on my partition table the expression is like TO_DATE(' 2012-03-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')
I just want to convert the high_value to date data type.

we had the same problem and we used a function for that purpose. I am not going to share our function here but Tom has all the gear you need : )
http://asktom.oracle.com/pls/asktom/f?p=100:11:::::P11_QUESTION_ID:665224430110

Similar Messages

How to convert a dynamic data type to array of strings

I want to perform a serial communication between two
computers that I´ll call them A and B. The computer A (transmitter)
will send a signal (sinusoidal) to computer B (receiver). I´m using a
VISA Serial Communications Set (VISA Configure Serial Port.vi, VISA
Write.vi, VISA Read.vi and VISA Close.vi). VISA Write accepts
only string data type and VISA Read reads only string data type, but
the signal that I generated (on transmitter) is dynamic data and I need
to perform this conversion to run my program sucessfully. How can I
perform this conversion?!

Hi Rafael,
You can configure the From DDT Express VI to convert your dynamic data to any number of different types. By default, the Express VI will convert to a 1D array of numerics...however, you can configure it (either when you first drop it, or by double-clicking it) to convert to a 2D array of numerics...additionally, you can configure it to convert based on channel data being in columns or rows. I have attached another screenshot that shows converting the dynamic data into a 2D numeric array.
I hope this helps.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
FromDDT2D.jpg ‏164 KB

How to convert XY graph data to type "signal in" for measurement functions

Hi all, i have a driver file that outputs the screen capture in XY graph format. I want to measure period using the measurement functions in the LabVIEW palette. Can someone tell me how to convert into this "signal in" type. The X (time) and Y (power) are all there but it creates an error when i wire together?
Please see my attached code.
Thanks,
Solved!
Go to Solution.
Attachments:
convert XY Graph to Signal In.vi ‏25 KB

Its ok folks, i have found a solution. See attached FYI.
Attachments:
convert XY Graph to Signal In.vi ‏43 KB

CAST Not working for me - Arithmetic overflow error converting int to data type numeric - error

GPM is DECIMAL(5,2)
PRICE is DECIMAL(11,4)
COST is DECIMAL(7,2)
Trying to update the Gross Profit Margin % field and I keep getting the "Arithmetic overflow error converting int to data type numeric" error.
UPDATE SMEMODETAIL SET SMD_GPM = (SMD_PRICE-SMD_COST) / SMD_PRICE * 100
FROM SMEMODETAIL WHERE SMD_PRICE<>0 AND SMD_QUANTITY<>0
Example record:
SMD_PRICE SMD_COST GPM%
1.8500 1.62 12.4324324324324300
I added cast and I still get the error.
How do I format to get this to work?
Thanks!

Hi GBerthume,
The error is caused by some value such as 1000.01 of the expression (SMD_PRICE-SMD_COST) / SMD_PRICE * 100 exceeds the
precision of the column(DECIMAL(5,2)). The example data doesn't cause the overflow error for the value of the expression is 12.43 which is in the scope of DECIMAL(5,2).
USE TestDB
CREATE TABLE SMEMODETAIL
SMD_PRICE DECIMAL(11,4),
SMD_COST DECIMAL(7,2),
SMD_GPM DECIMAL(5,2)
INSERT INTO SMEMODETAIL(SMD_PRICE,SMD_COST) SELECT 1.8500,1.62
UPDATE SMEMODETAIL SET SMD_GPM = (SMD_PRICE-SMD_COST) / SMD_PRICE * 100
FROM SMEMODETAIL WHERE SMD_PRICE<>0-- AND SMD_QUANTITY<>0
SELECT * FROM SMEMODETAIL
DROP TABLE SMEMODETAIL
The solution of your case can be either scale the DECIMAL(5,2) or follow the suggestion in Scott_morris-ga's to check and fix your data.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Arithmetic Overflow error converting float to data type numeric

Hi,
Am facing strange issue,I have function which returns money datatype and assigning the return money value to float datatype in table.
Error msg:
Msg 8115, Level 16, State 6, Procedure GBCalcCatalogPriceNewV2, Line 204
Arithmetic overflow error converting float to data type numeric.
The statement has been terminated.
Strange thing is the same stored procedure is working fine in production environment,but in the deveopment i see this error.Am scared if the same happens in the production environment.Please advice and advance
thanks
Regards
RAj

Strange thing is the same stored procedure is working fine in production environment,
How could that be strange? This is an error that occurs depending on the data. Accidents that are waiting to happen will happen sooner or later.
Then again, a development database may be more prone to such errors, because data that entered are completely out of whack with real life data. Still it is a warning sign. If you have some place where you convert data from float to numeric, you must consider
the risk that the float value is outside the range for the numeric data type. How do you prevent that from happening? Maybe a CHECK constraint on the column? Of if the data origins from a money column, use a numeric data type with sufficient precision.
Erland Sommarskog, SQL Server MVP, [email protected]

Arithmetic overflow error converting expression to data type int

Hi
iam creating on sp for the database total size , used mb and free size . percentage free .
in this purpose i was creating on sps, with in the sp iam was writing one select statement . it statement is
SELECT [Drivename] ,[DataSizedUsedMB],[DriveFreeSizeMB],DriveTotalSizeMB,
CAST( (DriveFreeSizeMB/DriveTotalSizeMB)* 100 AS NUMERIC(5,2))
As
[PercentFree] ,[DateRecorded] FROM
SELECT SUBSTRING([physical_name],1,1) AS Drivename,
CAST(((SUM(COALESCE(size,0)))*8)/1024 AS NUMERIC(20,2)) AS DriveTotalSizeMB,
CAST(((SUM( COALESCE( FILEPROPERTY( [name],'SpaceUsed'),0)))*8)/1024 AS NUMERIC(20,2)) AS DataSizedUsedMB,
CAST(((SUM(COALESCE(size,0))-SUM(COALESCE(fileproperty([name],'spaceused'),0)))*8/1024)AS NUMERIC(20,2)) AS DriveFreeSizeMB
,SYSDATETIME() AS [DateRecorded]
FROM sys.master_files
GROUP BY SUBSTRING([physical_name],1,1)) AS Data
it was executive one server with out error but the same select statement is writing antoher server iam geeting belo error.
"@ErrorDesc: Line 24 - Line 13- Arithmetic overflow error converting expression to data type int."
how to slove this issue..
please help me...

Change 8 to 8E0, to make it a float literal. The data type of
SUM(COALESCE(size,0)))*8)
is int, since all components are int, and it can easily overflow the size for an int. If you use 8E0, you get a float, and the entire expression will be float.
Erland Sommarskog, SQL Server MVP, [email protected]

How to define MDM real data type in ABAP ?

Hi,
I want to fetch MDM Repository data using MDM API .
I am strugling as one field in MDM is of real type .
Please tell me how I could define Real data type field in ABAP ?
Thanks.
Sandesh

I recently had a Real type added to a repository I'm working on and noticed a dump in the API itself when trying to fetch data from that field. I'm running 5.5 so you may be experiencing a different issue. I haven't resolved the issue yet as it isn't a priority but I will most likely move to a string field and just ensure that the field has its decimal rule respected logically.

How to access the Custom Data type variable given in Expression edit control To and From LabVIEW

Hello, I would like to know how to access the custom data type variable given in the Espression Edit Control from LabVIEW and vice-versa
Say, the FileGlobals.Reference_Handle (Custom Data Type Variable) contains the
VISA I/O session (Which in turn contains VISA_DeviceName: String, Session: Number),
Channel1: Number and
Channel2: Number
I am expecting the user to give FileGlobals.Reference_Handle as the input at the ExpressionEdit Control in the edit screen of the VI Call.
I would like to know how to get the values of this custom data type to LabVIEW?
Say, if I have the Cluster in LabVIEW like VISA I/O session (Deive Name and Session Number), Channel1 and Channel2
how do i need to set this cluster to the Custom Data type variable in TestStand?
Thanks and Regards
Prakash

Hi,
TestStand to LabVIEW: i didnt understand what you r trying to achieve. But if you are using references, Use Property nodes and Invoke nodes to achieve what you want in LabVIEW.
LabVIEW to TestStand: check the image below: You need to click the button next to 'container'. I have used a cluster output in the VI.
Hope this helps
.......^___________________^
....../ '---_BOT ____________ ]
...../_==O;;;;;;;;_______.:/
Attachments:
1.JPG ‏187 KB

How to convert milliseconds to date format in sql query

Hi All,
The following code is in java.
String yourmilliseconds = "1316673707162";**
Date resultdate = new Date(Long.parseLong(yourmilliseconds));
could you plese tell me how to convert milliseconds into date format in query and comparing with another date like(sysdate-3)

Hello,
http://stackoverflow.com/questions/3820179/convert-epoch-to-date-in-sqlplus-oracle
Regards

How can I get network data type

how can I get network data type: ip, gatway, sub mask, and DNS on the Mac. windwos system and so go on and put cmd ipconfig / all adiquirr how can this data in mac book pro XOS.
thanks,
Marcello

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP.

How to convert files into DAT?

Does anyone know how to convert files into DAT? Not The other way around please.

This might do it:
http://www.videoconverterformac.com/dat-converter-for-mac.html
but can't imagine why you would want to!

How to convert internal table data to PDF format

HI,
I have an internal table data having one field with 255 chars. length.I want to send that intenal table data as attachemnt with external mail. i am thinking of converting that data into PDF format and use the FM to send the mail. How to convert internal table data to PDF format.
Kishore

In which format is your data in the internal table currently. Is it returned by a smartform/script or its just data fetched from some database table into an internal table. Since its obvious that the data should appear in the PDF with some Layout, you should be using smartform to format the data properly. See the Link
Smartform to PDF to EMAIL
This shows convertion of smartform to pdf and send it through email
Regards,
Abhishek

How to invoke functions and data type( ex. sflight structure ) that is in t

Hi,experts,
I create a funcion(zz_test) that return sflight table type data. I need to invoke the function in the Webdynpro for java application.
I think I would import the funtion to local.
But I don't know how to import the function and the data type using SAP NetWeaver Developer Studio?
But I don't know how to invoke functions and data type( ex. sflight structure ) that is in the R/3 in the WDJ?
Do you give me some hints?
Thanks a lot!
Best regards,
tao

Hi Wang Tao,
For achieving this you need to user Adaptive RFC models.
This link explains you on the same :
http://help.sap.com/saphelp_nw70/helpdata/EN/6a/11f1f29526944e8580c5e59333d96d/frameset.htm
Thanks
Namrata

Arithmetic overflow error converting expression to data type int. Why in this case?

Hi guys, it is Friday and I am really tired but..
WITH CTE AS (
SELECT LEN(CONS_ID) AS PROCA FROM TryCons)
SELECT SUM(PROCA) FROM CTE
Why I retrieve
Arithmetic overflow error converting expression to data type int.
Len should returns a number and so sum should work. It can be because I am trying to read 500 millions rows? But it wouldn't make sense..

Len should returns a number and so sum should work. It can be because I am trying to read 500 millions rows? But it wouldn't make sense..
If the average length of the field exceeds 4.29, that statement will explode. Since I don't know what's in CONS_ID, I can't say whether it makes sense or not. Although, I will have to say that from my uninitiated position, this seems like an
accident to happen.
Erland Sommarskog, SQL Server MVP, [email protected]

How to Convert internal table data into text output and send mail in ABAP

Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VT

here's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
*     -------- create persistent send request ------------------------
       gv_send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document -------------------------------
*     create text to be sent
       wa_line = text-001.
       APPEND wa_line TO gt_text.
       CLEAR wa_line.
       APPEND wa_line TO gt_text.
       LOOP AT gt_fail ASSIGNING <fs_fail>.
         MOVE <fs_fail>-retry_count TO gv_count.
         CONCATENATE text-002
                     <fs_fail>-setting_id
                     text-003
                     gv_count
                     INTO wa_line SEPARATED BY space.
         APPEND wa_line TO gt_text.
         CLEAR wa_line.
       ENDLOOP.
       APPEND wa_line TO gt_text.
       wa_line = text-007.
       APPEND wa_line TO gt_text.
*     create actual document
       gv_document = cl_document_bcs=>create_document(
                       i_type    = 'RAW'
                       i_text    = gt_text
                       i_length = '12'
                       i_subject = 'Failed Precalculation Settings!' ).
*     add document to send request
       CALL METHOD gv_send_request->set_document( gv_document ).
*     --------- set sender -------------------------------------------
       gv_sender = cl_sapuser_bcs=>create( sy-uname ).
       CALL METHOD gv_send_request->set_sender
         EXPORTING
           i_sender = gv_sender.
*     --------- add recipient (e-mail address) -----------------------
       LOOP AT s_email INTO wa_email.
         MOVE wa_email-low TO gv_email.
         gv_recipient = cl_cam_address_bcs=>create_internet_address(
                                           gv_email ).
         CALL METHOD gv_send_request->add_recipient
           EXPORTING
             i_recipient = gv_recipient
             i_express   = 'X'.
       ENDLOOP.
*     ---------- set to send immediately -----------------------------
       CALL METHOD gv_send_request->set_send_immediately( 'X' ).
*     ---------- send document ---------------------------------------
       CALL METHOD gv_send_request->send(
         EXPORTING
           i_with_error_screen = 'X'
         RECEIVING
           result              = gv_sent_to_all ).
       IF gv_sent_to_all = 'X'.
         WRITE text-004.
       ENDIF.
       COMMIT WORK.
*   exception handling
     CATCH cx_bcs INTO gv_bcs_exception.
       WRITE: text-005.
       WRITE: text-006, gv_bcs_exception->error_type.
       EXIT.
   ENDTRY.
with the following declarations
* TABLES                                                               *
TABLES:
   adr6,
   rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS                                         *
DATA:
   gt_fail          TYPE SORTED TABLE OF rsr_prec_sett
                         WITH UNIQUE KEY setting_id run_date,
   gt_text          TYPE bcsy_text,
   wa_fail          LIKE LINE OF gt_fail,
   wa_line(90)      TYPE c.
FIELD-SYMBOLS:
   <fs_fail>        LIKE LINE OF gt_fail.
* VARIABLES                                                            *
DATA:
   gv_count(4)      TYPE n,
   gv_send_request TYPE REF TO cl_bcs,
   gv_document      TYPE REF TO cl_document_bcs,
   gv_sender        TYPE REF TO cl_sapuser_bcs,
   gv_recipient     TYPE REF TO if_recipient_bcs,
   gv_email         TYPE adr6-smtp_addr,
   gv_bcs_exception TYPE REF TO cx_bcs,
   gv_sent_to_all   TYPE os_boolean.
* SELECTION-SCREEN                                                     *
SELECT-OPTIONS:
   s_email          FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
   wa_email         LIKE LINE OF s_email.

How to convert high_value to date data type on dba_tab_partitions

Similar Messages

Maybe you are looking for