How to convert Info Pack Group

Dear friends,
Could u pls clarify for my below questions,
1)How would you convert a info package group into a process chain?
Cheers
ReddyS

Hi Swathi,
pls go through the below points
1. Goto PC maintenance screen (RSPC)
2. Create new Process Chain
3. Create variant for Start process (Give description and Tech. name).
4. From process types select "Infopackage" and drag it to the process chain window.
5. Select Infopackages used in Infopackage Group (one by one)
6. Link these processes as per the execution sequence in Infopackage group.(Click on process and drag to the other process)
7. Add the PSA to Data Target step as Infopackages load until PSA level.
8. Activate the process chain.
Or try Function Module RSPC_MIGRATE_INFOPACKAGE_GROUP if it is available in BI 7.0.
Please folow the link below:
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm]
regards,
rudra.
Assign points if useful

Similar Messages

How to check vendor schema group for info record for third party vendor

Hi Expert,
How to check vendor schema group that assigned in info record for third party vendor?
Thanks

Hi,
Vendor schema group is not assigned in info record, It is assigned in purchasing data view of vendor master ( Check in XK03 )
You can check in Vendor master- XK03- Purchasing data.
hope it will help u.
Deepak

How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???

Hi BW Gurus,
How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???and what are the
measures i need to take care before doing the same .
prasad

Hi,
Simply add these infopackage groups into process chain and schedule the process chain.
Hope this helps.
Assign points if useful.
Regards,
Venkat

How to convert the class in the one package to same class in the other pack

How to convert the class in the one package to same class in the other package
example:
BeanDTO.java
package cho3.hello.bean;
public class BeanDTO {
private String name;
private int age;
* @return
public int getAge() {
     return age;
* @return
public String getName() {
     return name;
* @param i
public void setAge(int i) {
     age = i;
* @param string
public void setName(String string) {
     name = string;
BeanDTO.java in other package
package ch03.hello;
public class BeanDTO {
private String name;
private int age;
* @return
public int getAge() {
     return age;
* @return
public String getName() {
     return name;
* @param i
public void setAge(int i) {
     age = i;
* @param string
public void setName(String string) {
     name = string;
My converter lass lokks like
public class BeanUtilTest {
     public static void main(String[] args) {
          try
               ch03.hello.BeanDTO bean=new ch03.hello.BeanDTO();
          bean.setAge(10);
          bean.setName("mahesh");
          cho3.hello.bean.BeanDTO beanDto=new cho3.hello.bean.BeanDTO();
          ClassConverter classconv=new ClassConverter();
          //classconv.
          System.out.println("hi "+beanDto.getClass().toString());
          System.out.println("hi helli "+bean.toString()+" "+bean.getAge()+" "+bean.getName()+" "+bean.getClass());
          Object b=classconv.convert(beanDto.getClass(),(Object)bean);
          System.out.println(b.toString());
          beanDto= (cho3.hello.bean.BeanDTO)b;
          System.out.println(" "+beanDto.getAge()+" "+beanDto.getName() );
          }catch(Exception e)
               e.printStackTrace();
But its giving class cast exception. Please help on this..

Do you mean "two different layers" as in separate JVMs or "two different layers" as in functional areas running within the same JVM.
In either case, if the first class is actually semantically and functionally the same as the second (and they are always intended to be the same) then import and and use the first class in place of the second. That's beyond any question of how to get the data of the first into the second if and when you need to.
Once you make the breakthrough and use one class instead of two I'd guess that almost solves your problem. But if you want to describe your architecture a little that would help others pin down want you're trying to do.

How to convert groups into layers by retaining groups names

Hi,
I have a file with 90 illustrations on 90 pages. Unfortunately, all illustrations are located in 90 groups but in a single layer. The groups however are named. I'd now like to convert those named groups into 90 layers by retaining their names in order to export each layer into single PNG-files with their correspondent layer-name later on.
Any ideas anybody?
Thanks for your help, kind regards,
Ralf,
Cologne

AppleScript = mac only
VBScript = pc only
JavaScript = cross platform
here's a sample in JS...it does the first part, it moves the groups to layers
var idoc = app.activeDocument; // get active document
var ilayer = idoc.activeLayer; // get active layer
for (i=ilayer.groupItems.length-1; i>=0; i--) // loop thru all groups backwards
          var igroup = ilayer.groupItems[i]; // get group
          var newLayer = idoc.layers.add(); // add new layer
          newLayer.name = igroup.name; // rename layer same as group
          igroup.move(newLayer,ElementPlacement.PLACEATEND); // move group to new layer

How to convert a text object to a Group?

There are some text object present on Adobe Illustrator document. Each text object is required to convert in individual group, so that some entities can be inserted under those objects turned groups.
In the APIs available with AI SDK, there can not be found an API to have the conversion directly. There is a provision of 'ReleaseToLayer' but it will not serve the purpose.
Will it be possible to have such coversion?
OR
It will also do, if a Group is created and the text object is able to be moved under the Group.
Is there any API to create a 'Group' ?

I'm not quite following what you're trying to do exactly, but I'm sure there's a way to do it.
You can create a group using the AIArtSuite (NewArt). You can iterate through a text object using the objects found in IText.hpp. You can load an IText object using the functions in AITextFrame.h (usually GetATETextRange). If you're trying to break up parts of text into separate groups, you'll have to do that manually using these APIs. If that's not what you're trying to do, I'm afraid I'm just not understanding your explanation; maybe you can try and clarify it.

How to Schedule the info package groups?

Hi,
To scheudle the info package group is it enough to shcedule at infopackage group level or do I need to schedule each info pcakages?

Hi ,
You can execute at Group level.
Plz find teh steps for creation and sheduling of IP Group,
1. GO to Adminsitrator workbench RSA1 > Infosources
2. Create your infopackage do not select option but select data load
immediately get out of infopackage prior to going to step 3
3. Click on icon show infopackage groups
(icons are update tree, monitor, display node log, search in subtree,
legend, and show infopackage groups)
4. This will create another window. Now you can create your infopackage
groups. Right Click on folder (infopackage group)
enter long description name, go back to your infopackage and pull it
to the infopackage group
(it's a drag and drop to long description name you just created and
remember it will be on the bottom of the list most likely)
5. Click on infopackage group and its time to select which on to run
first and time your going to schedule it.
INFOPACKAGE
a. Execute package should have a check mark without it itwon't run.
b. Start Sequence (depends on which one you want to run
first for my example its) 1
c. Selection exists (is created when you pull youinfopackage to group)
d. Maintain infopackage is a pencil and will take you therefrom hereInfopackage is your name from the infopackage you pulledover
e. Data type (is created when you pull your infopackage togroup)
Check whether contents was updated without errors beforeyou start next request
(I highly recommend you check this because if will stopyour process if a infopackage fails)
f. Delay until the start of the next request (not necessaryto check)
g. Technical name
Schedule
Selection Options: Immediate (now)Date time (preselected time) if youcheck period and period valueshere it can be run eachday or specific dayAfter job
After event At operation mode
Regards
Marasa.

How to convert the character value to currency/numeric

Hi,
See the sample code here
data: v_qtr_field(7).
data: w_low_limit like glt0-kslvt,
      w_amount like glt0-hslvt.
w_low_limit = 02.
w_max_period = 3.
concatenate 'HSL' w_low_limit into v_qtr_field.
*comment
*I am looking for a field formation thru above code like in GLT0 table like HSL02,HSL03 *etc based on the value user entered in the selection *screen
DO w_max_period TIMES
VARYING w_amount FROM v_qtr_field NEXT v_qtr_field + 1.
   t_trans_values-dmbe2 = t_trans_values-dmbe2 + w_amount.
ENDDO.
I am facing problem in the Do loop as it wont allows multiple data types. can you suggest me how to convert the v_qtr_field whose data type is character to currency?

Hi,
Please check this code .
PERFORM write_currency
              USING buf_anla-urwrt t_dates-waers t_txw_anla-urwrt.
*       FORM WRITE_CURRENCY                                           *
*       convert currency amount to string                             *
*       - use decimal point                                           *
*       - remove separator characters                                 *
* --> P_AMOUNT                                                      *
* --> P_CURRENCY_UNIT                                               *
* --> P_STRING                                                      *
FORM WRITE_CURRENCY
     USING P_AMOUNT        TYPE P
           P_CURRENCY_UNIT LIKE TCURC-WAERS
           P_STRING        TYPE C.
DATA: DEC2POINT(2) TYPE C VALUE ',.'.
* convert separator to decimal point
WRITE P_AMOUNT TO P_STRING CURRENCY P_CURRENCY_UNIT
        NO-GROUPING
        NO-SIGN
        LEFT-JUSTIFIED.
TRANSLATE P_STRING USING DEC2POINT.
* put minus sign before number
IF p_amount < 0.
    SHIFT P_STRING RIGHT.
    P_STRING(1) = '-'.
ENDIF.
ENDFORM.
<i>Hope This Info Helps YOU.</i>
Regards,
Lakshmi

How can I remove 300 groups from my iCloud Contacts?

My OS X Address Book started out with about 10 groups, but now iCloud.com has about 300 groups.
The replication arose because of a bug in how iCloud handles a mixture of Address Book Cards with both OS X and Windows line terminated Notes (LF vs. CRLF - it helps if you once used a typewriter).
I figured out how to convert Address Book to all LF terminated line feeds and I was able to get iCloud.com working on a different account, but my core account is stuck with 300 groups (some replicated 50 times).
I know how to delete all Cards/Contacts in iCloud.com Contacts, but, unfortunately that doesn't remove Groups. (Groups have an interesting behavior in iCloud, almost as though Apple has a special plan for them.)
I can delete Groups one at a time on iCloud.com, but that's tedious. Unfortunately deleting them on Address Book, and trusting in sync to clear up iCloud.com, is equally tedious.
Has anyone heard of a way to delete all Groups on iCloud or Address Book 6? Perhaps an AppleScript?
Has anyone heard of Apple resetting a corrupt iCloud account to clear out bad data? (I have a clean version of Address Book I can use to restart -- that, by the way, is harder than you'd think. Again because Groups are special).
Advice appreciated. If I get some free time I might take may laptop by the Genius bar and see what they say...

I figured this out. In this case I didn't care about my Contacts, I had them elsewhere. My problem was my iCloud acount was "poisoned" with massive replication of 'Groups'. Even after I deleted all the Contacts I still had hundreds of Groups to get rid of. Manual deletion was too tedious.
The answer was a simple AppleScript (I'm on ML on the machine i ran this on, so it's "contacts" rather than Address Book:
tell application "Contacts"
          repeat 50 times
                    set theGroup to group "MyGroupName"
delete theGroup
          end repeat
save
end tell
Since I had the same Group Names replicated about 100 times each, I only had to run this about 10 times to clear them all out. When I got to smaller numbers I had to drop the repeat count. I changed the Group name as I went.
Took me about five minutes.
I'm sure an AppleScripter could turn this into a general script for removing all groups all at once. Or could get very clever, and only remove groups that had no contacts (so one could salvage the group/contact relationships).
I didn't need that. My problem has been fixed.
I think sync works a LOT better in ML than Lion btw. iCloud updated very quickly.

How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie

How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie - simple answers please - Thanks in advance.

@Pipeline2007 - which version of Microsoft Office have you got? Older versions of Acrobat aren't compatible with the latest versions of Office, see this link for info:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

How to convert FLV and F4V files to other media formats

How to convert FLV and F4V files to other media formats
Nowadays, every one can download their favorite videos from video sharing websites like YouTube, Hulu, MySpace, Google Video, metacafe, Yahoo! Video, Reuters.com and so on at will. However, these video files we got are usually in the format of FLV, or F4V, which are not workable by most portable devices, or some video players and video editors on our PC. With the intention of solving these problems, this guide will show you how to convert FLV and F4V files to other video and audio formats in detail.
1. Download, install and run Pavtube FLV Converter
As soon as you run this program, the following wine red interface will show up:
2. Add files, set output format and destination folder
Input FLV and F4V files to this program by clicking on “Add” button, and select a format as the output format in the drop-down list of “Format”, meanwhile, you can press the output folder to specify the destination folder or just use the path set by default. Moreover, “merge into one file” enables you to combine multiple FLV and F4V files to be as a single file, if you have this needs, just tick it.
3. Set advanced settings
Click “Settings” button, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. on it to optimize the output quality or compress file size.
4. Convert
After all settings are done, you can press “Convert” button to start transferring, and then the following window will show you the conversion info in detail. According to the info you can manage your time and disk space properly.
Pavtube FLV Converter can definitely complete the conversion at a swift speed with excellent quality; also it adopts an advanced audio-video sync technology, so that audio and video match very well in the resulted files. Therefore you need not worry about these issues.
Useful tips:
Free online FLV downloader:
www.convertdirect.com
http://vixy.net/
http://www.videoconverterdownload.com/online-free-flv-converter.html
http://www.flv2mp3.com/
http://www.mediaconverter.org/
http://2conv.com/
http://online.movavi.com/
http://www.youconvertit.com/
http://www.playtube.com/
http://www.convert.net/

Flip4Mac

How to Convert Date to Month in Database which is pointing to EBS, Not DWH.

Hi Friends,
We are planning to create reports in OBIEE and the Source is EBS. That means, we don’t want to depends on Datawarehouse and Informatica and OBIApps. We just create some reports and they are pointing to EBS database.
For testing purpose, we have taken one HR Report and it containsthe below columns:
Month (Dim)
Revenue Per Employee Headcount (Fact)
Average Cost per Active Workforce Headcount (Fact)
In my little investigation, we found that Revenue column is coming from EBS: GL_BALANCES. And we configured W_Day_D base table in DAC as there is no Month column in EBS (Not sure).
*** Coming to my problem, how can I call Month column in my database pointed to EBS. How to convert Date to Month in my database.
I could be wrong but anyone please look into this issue.. How can I create columns for that exact OBI report in EBS database instead of DwH.
Thanks in Advance..
Raghu Nagadasari

Hi Veeresh,
You are right. Here, no need of using W_DAY_D table, but, we need all the stuff from the table and to explain my problem i have taken that table as an example. Now, we ran scripts for W_MONTH_D and W_DAY_D tables with EBS columns. So, we are getting data for the tables. In the same manner we have to create scripts for the below tables.
W_GL_ACCOUNT_D
W_GL_OTHER_F
W_STATUS_D
W_MCAL_DAY_D
W_EMPLOYMENT_STAT_CAT_D
W_WRKFC_BAL_A
W_DAY_D (Completed)
W_MONTH_D (Completed)
But, we are not aware of EBS Tables and their columns much. So, we are back tracing from RpD --> DAC --> Info --> EBS for each and every column and its taking much time.
So, if anyone of you facing the same issue, please share the EBS tables for the corresponding OBI tables, which are mentioned above.

How to convert a String to an Icon

Hello,
I'm trying to figure out how to convert a String (specifically one letter) to an Icon for a JTree. The program I am working on uses .png files for the icons at the moment, with each .png being a single uppercase letter. However, recent discussion has us wanting to change to something more dynamic, since we anticipate needing new letters in the near future.
My task is to modify the current codebase so that the Icons used to identify nodes in the tree are created from a Font within code, rather than reading in .png files. I have done some experimenting with creating a Label with just that String, setting the font and trying to extract the image using calls like createImage(int width, int height) and so on, but so far to no avail.
If I could figure out how to at least convert the String to an image, I could probably make it work (since I can play around with creating an ImageIcon with that image). Thanks in advance for any help.
Allan

Here is some quick and dirty code:
import java.awt.*;
import javax.swing.*;
public class BasicIcon implements Icon {
    private String text;
    public BasicIcon(String text) {
        this.text = text;
    public int getIconWidth() {
        return 16;
    public int getIconHeight() {
        return 16;
    public void paintIcon(Component c, Graphics g, int x, int y) {
        Color old = g.getColor();
        g.setColor(c.getForeground());
        g.drawString(text, x, y+13);
        g.setColor(old);
    public static void main(String[] args) {
        JPanel cp = new JPanel();
        for (char ch = 'A'; ch < 'F'; ++ch) {
            cp.add(new JButton("letter " + ch, new BasicIcon(String.valueOf(ch))));
        JFrame f = new JFrame("BasicIcon");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.setContentPane(cp);
        f.pack();
        f.setLocationRelativeTo(null);
        f.setVisible(true);
}One thing that could be improved is the vertical positioning of the letter in the Icon.
The x,y values passed into paintIcon are the upper-left hand corner of the icon,
but the y value needed by drawString is the position of the String's baseline.
To do it right, use one of Font's getLineMetrics methods and play around with ascent.

How to convert workflow template number into transation code?

Hi Experts,
We are using WS20000081 Leave request workflow in SAP 4.7.I created one customized workflow according to the client requirement.How can i convert WS99900009 into Transaction?
I created one absence type with workflow template WS99900009.While applying a leave it is showing the erroe as "WS99900009 is unknown" .
Please help me to resolve this problem.
Thanks,
Hemalatha

Hi Arun
WS20000081 and WS04200009 are triggering when i applied a leave.But i need to add some amore task in that.For that i created the Customized workflow.Then we tried to create Rule groups with custom workflow id number in ESS settiongs.It was saying that ws99900009 is unknown.And we tried to replace the WS20000081 by ws99900009.It was alos saying that ws99900009 transaction is unknown.
So pls guide me how to convert ws99900009 into transaction?
Thanks in advance
Regards,
Hemalatha

How to convert message in XI into PDF format

Hi,
I am trying out a scenario where i am getting an idoc from SAP into XI and now in XI i need to convert the data into pdf format and send that pdf in a mail using mail adapter.
Can any body help me out how to convert a message in XI to pdf format.
Thanks in Advance!!
Regards,
Sudheer

Hi Sudheer
follow these links
http://www.erpgenie.com/sap/sapedi/Conversion%20of%20IDOCs%20to%20XML%20format.pdf
Here is the complete code for you;
It Converts spool request into PDF document and emails it.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Smartform as attachment in mail. - 46k
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/convert-smartforms-form-in-pdf-998715 - 87k
SMART form to PDF
https://wiki.sdn.sap.com/wiki/display/Snippets/ConvertSmartformtoPDFformat
smartform to MAIL
https://wiki.sdn.sap.com/wiki/display/Snippets/SmartformtoMailasPDF+attachment
Regards
Sandeep Sharma
PS: if helpful kindly reward points

How to convert Info Pack Group

Similar Messages

Maybe you are looking for