How to convert Sender Party/Service  to a Logical System?

Hi All,
I want to send a IDoc to a SAP system from a sender Party as a Logical System.
The only way I know is to make a Dummy system in the SLD with a LS, which I can use in the headermapping of the receiver agreement. But I don't want to create for every party in our Directory a dummy system in our SLD. There must be an other way (and I am not talking about LI or KU)!
Why does not the "adapter-Specific Identifiers" of the Party-service do the job?
Can any body help me with this problem?
Cheers,
Frank

Hi Frank,
it is not possible to have a logical system within a service, that belongs to a party. Any entries you are doing here, are ignored.
Usually an IDOC which is received from a customer should have a sender type LI or KU.
A workaround for your problem: For each service that belongs to a party create a party-less service with the logical system and do a header mapping. You need not maintain this service in the SLD. Just create a business service.
I am sorry that there is no better solution for this.
Regards
Stefan

Similar Messages

  • How do I send my BMP info from logic to pedals and keys?

    How do I send my BMP info from logic to pedals and keys?
    Is it possible to sync my logic bmp with my microkorg so that my korg automatic will sync with the BMP from logic?

    I'm not faniliar with the Micro, but logic outputs mtc and midi clock. The serttings are under project settings/synchronization. You'll have to set the Micro to external sync and be sending midi info from your computer to the Micro. Then if you hit play or record in Logic, the micro will chase it.

  • Unable to convert sender party to IDoc partner

    Hi guys!
    I have read a lot of threads to this topic, however, I can't make my scenario working...
    I use Party as sender of document and need to send it to target (our) R/3.
    I have set up:
    Sender party: Cocoon, Sender Business SERVICE: IslandSys
    To target IDoc XML I map:
    SNDPRT - KU
    SNDPRN - D600
    SNDPOR - IslandLS
    In Party Identifiers:
    Agency: IslandSys
    Scheme: ALE#KU
    Name: D600
    Pertner profile - WE20 (target R/3)
    type: KU, No. D600
    In Business Service's Adapter Specific Identifiers: Logical System: IslandLS
    But the scenario doesn't work..
    What's wrong with the config?
    Thanx a lot for help!
    Olain

    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    <!-- Call Adapter -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_PARTY</SAP:Code>
    <SAP:P1>http://sap.com/xi/XI</SAP:P1>
    <SAP:P2>XIParty</SAP:P2>
    <SAP:P3>Cocoon</SAP:P3>
    <SAP:P4/><SAP:AdditionalText/>
    <SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Unable to convert sender XI party http://sap.com/xi/XI / XIParty / Cocoon to an IDoc partner
    </SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>

  • How to convert an Application Service into a Web Service

    Hi,
    I am working on SAP Netweaver CE 7.1. I have created an Application Service which returns an output as a List with each elemnt of the list conatining some attributes and a List.
    now I want to convert this AS into a Web Service. how I can do that as teh Developer Studio doesn't allow me to select the method which returns the List.
    Also how should I deploy the Web Service and test the same.
    Please reply ASAP.
    Manish

    To convert your Application Service into a Web Service ,
    1) go to General Tab of your Application Service
    2) check the option Remote Enabled Service , Save Metadata
    3) Right click Application Service and select  WebService New , give name for your Webservice and select Default Configuration type : Simple SOAP or select Basic Auth SOAP if u want your webservice to be password protected , just click next and finally finish
    4) Genearte your project code , build and deploy your application
    5) Then goto webService navigator to test your Web service
    Hope this helps
    Thanks
    Asif

  • How can i send MIDI clock out of logic 9 to hardware synths ?

    Hello !
    I would like to send out midi clock from Logic 9 to my hardware synth.
    Are my MIDI setting set up right ? I have attched some images below.
    Hope someone can help.......?!?!

    Create a few "External MIDI Tracks"
    Was exactly was what I was looking for - thanks, Pancenter!
    I didn't realize that this was available.  I was attempting to make pre-existing MIDI tracks into External MIDI Tracks; when it has to be initialized from the setup.
    I've been able to get my keyboard to be played using your suggestion.
    Again your expertise & assistance has been appreciated here, Pancenter!

  • For the 609 error, I don't know how to disable third party services?

    I know the whole first part of the solution to error 609 but since that didnt work I'm trying the second part but I have no idea how to do it.

    You need to be more specific.
    Where did this error code present itself.
    Site your reference for more informed info
    https://discussions.apple.com/thread/5290174

  • External Party to Logical System Integration

    My scenario is as follows
    External Party --> XI --> ECC. XML coming into XI and data posted in ECC using IDoc.
    We have several different external parties that we need to integrate with but they all will send us the data in the same XML format and they do not have any different mapping requirements. So we can use the same design objects for all of them. However, they need to be setup as separate logical systems in ECC as we have different teams that support error handling for each of the external parties.
    I dont have any need to use BPM as my mapping is fairly straightforward. I have setup a party in XI for each external party.
    My problem is how can I have XI pass IDoc to different logical systems based on the external party?
    I have tried playing with the adapter specific attributes on the sender service and giving logical system there but to no avail. How can I accomplish this without creating the parties as business systems in SLD as there are quite a few of them? Or is it the only way?
    Any help will be greatly appreciated and rewarded.
    Regards
    Haseeb

    Hi,
    Is there some way that the source payload allows you to distinguish which system it comes from and what the logical system name has to be ?
    If yes, in the Idoc control record, populate the values of  SNDPRN and SNDPRT with the Sender PartnerName and Sender Partner Type ( Sender Partner Name will be the logical system name ) on the basis of this source condition and in the Idoc adapter select option "Take Sender from payload"
    Regards
    Bhavesh

  • Stuck with logical system name for JDBC Sender system!!!!!!!!!!!!!

    Hi All,
    I'm doing a scenario as JDBC2FILE.
    I tried to add my jdbc sender system to SLD. So i created the technical system
    now i'm creating business system...what should i give at logical system name tab? I've created tech system and business system as third party.
    do we need logical system name in this scenario where we are not interacting with any R/3???
    can anyone suggest the way to achieve this scenario?
    Thanks in advance.....
    Santhosh.

    Hi Santhosh,
    I just want to add ons..few more information which it might help you.
      You no need to give logical system when you are using Thirdpaty.
    Please check the below blog you will get more idea how to proceed to achieve the JDBC Scenario.
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    If you have any doubts while proceeding with your scenario plesae let me know..I will try my level best.
    Thanks and Regards,
    Chandu

  • Logical System Name of an Idoc Sender

    Hi,
    I have seen that For Idoc senders the the Logical System name associated with the sending Client has to be SAP+System Id(For example SAPE05 where System Id = E05).
    Is it mandatory? If so how can I have multiple clients in a sender Idoc systems sending data?
    Regards.

    The logical system nameing convention is:
    <System ID>CLNT<Client>.
    If your system is ADM, client 070, the name would be:
    ADMCLNT070.
    Regards,
    Jason

  • How to change name of a logical system

    Hi SDN,
                 I am trying to customizing intial download data transfer from ECC to CRM. But in outbound queue of ECC it is showing an error of SYSFAIL with description of logical system name changed. Given note 558701.
    But I don't know old name of logical system.
    1) Can you guys please help how to find the old logical system name there are many logical systems defined in my system.
    2) and how to change it?

    Hi Ravi,
    Since logical system name is changed sombody in past must have ran BDLS to conver logical system name.
    Check tcode SLG1, this tcode will tell you whether there were any logical system conversion done in Past, if it is done then it will tell you from which old logical system its converted to new one. So you can find out old logical system name.
    Once you find out old logical system run BDLS again. It might possible BDLS ran unsuccessfully last time.

  • How to trigger EDI output type by logical system

    Hi,
    I am trying to propose a delivery output on delivery document based on logical system.
    I have maintained partner profile by logical system. In the partner profile, i have given the delivery output type and the process code.
    I have also maintained condition records for the delivery output.
    I would like the system to propose the delivery output not by ship to party or sold to party but by the logical system.
    Because i do not want to maintain 3000 customers in the partner profiles, instead trigger the output by logical system.
    Please let me know, if anyone has gone thru this situation and resolved.
    Thank you in advance.
    -Naga

    Hi,
    First thing you should make sure that, when you create the output type , partner function should have an entry for EDI - LS combination.
    Secondly , make sure you have option for EDI transmission on the output type (medium 6).
    Third, when you create partner profile for LS, make sure you give partner function as LS, even though SAP gives warning that its not required.
    Last but not least, i didnt create any distribution model , because when i created distribution model and generate partner profile, system was not generating the profile properly.
    I am not sure, whatever i did was right, but its working for me.
    -Naga

  • BPM -  IDoc to SOAP problem (Unable to convert sender service)

    Hi,
    I have a BPM scenario where I'm sending an Idoc from r/3 to XI to SOAP.  As part of my scenario I'm sending an acknowledgment (ALEAUD) back to R/3. 
    I'm getting Unable to convert sender service IP_BPEL_INBOUND_ORDER to an ALE logical system on the Ack back.
    So I usually know what to do when I get this, I do the SLD settings on the r/3 service and I'm OK.  But in this case, it's asking for those ALE settings on the Integration Process?
    I tried adding a logical system on it but now I'm getting the error that this is already used by the r/3 service.  So I'm not to sure what to do next???
    Rgds,
    Yves

    Ok do one thing, in you mapping take one field at target side (may be u can create one or use which is not been used yet) just map the standard function called Sender to this field in target.
    Now in Intergration Directory when you do the header mapping by using F4 do not map the business systems this time, just press the button "Etended Path" (m not sure abt the exact name of this button) not use the X-Path here and select that target field which you mapped with Sender function in mapping.
    How To Handle Acknowledgments for IDoc
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
    I hope this will solve your problem.
    Regards,
    Sarvesh

  • Unable to convert the sender service to an ALE logical system

    Hello,
    file adapter > XI 3.0 > Idoc adapter > r/3 system
    In sxmb_moni I receive "Unable to convert the sender service to an ALE logical system".
    In we05 in r/3 system no Idocs are arrving. I have no problem with idoc > XI >  idoc scenario to this same r/3 system (using same sld business system)
    I read other topics on this error but it seems they all talk about an IDOC outbound interface.
    What should I check?
    Thanks
    Boaz

    I do have the same problem as Boaz Paz
    When I try :
    file adapter > XI 3.0 > Idoc adapter > r/3 system
    > This is a B2B scenario where "AVTItalia" is the external party trying to send via its "AwayOrders" business service (a file pickup) an idoc to business system "UPG" (non party service)
    I get an error while XI tries to call its IDoc Adapter:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
    <SAP:P1>AwayOrders</SAP:P1>
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>Unable to convert sender service AwayOrders to an ALE logical system</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    With the following trace logs :
    <Trace level="1" type="T">Party normalization: sender</Trace>
    <Trace level="1" type="T">Sender scheme external = XIParty</Trace>
    <Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
    <Trace level="1" type="T">Sender party external = AVTItalie</Trace>
    <Trace level="1" type="T">Sender party normalized = AVTItalie</Trace>
    I ve tried to (cf. /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc ):
    1. add a logical system name "ACYAVTFBC1" in "Adapter specifier Id" of "AwayOrders"
    In the runtime cache > services an entry appears for " ... Logical System | AVTItalia | ACYAVTFBC1...".
    2. declare "AVTItalia" as a business partner in SLD with the logical system name
    Plz help!

  • SOAP to IDOC: Unable to convert sender service BS to an ALE logical system

    Hello everyone,
    I have this scenario where i receive web services calls and have to integrate the received xml messages (idocs) into SAP R3 system.
    I allready reveive the message in my XI engine, but i'm getting this error (being  BS the name of my Business Service included in my external party):
    "Unable to convert sender service BS to an ALE logical system"
    I allready tried everything that is specified in this blog:
    The specified item was not found.
    Probably it doesn' fit my requirements. I'm not sure...
    Can anyone help ?
                                 Thank you in advance for any help
                                       Nuno

    - do u have the same logical name defined in the BS and in the Adapter specific attributes.
    also check if u have defined the logical system (SALE ) with the same name.

  • Unable to convert the sender service ABC_Service to an ALE logical system

    Hi,
    I have a JMS (Party) --> PI --> IDOC scenario.
    Party: ABC_Party
    Service: ABC_Service
    I am getting the error Unable to convert the sender service ABC_Service to an ALE logical system when I test the scenario using RWB -> Component Monitoring -> Integration Engine -> Test Message.
    I have already done the below settings:
    1) Defined Header Mapping in Receiver Agreement for IDOC (Sender Party, Sender Service and even Receiver Service are specified)
    2) Business Component (ABC_Service) -> Adapter Specific Identifiers -> mentioned details for SAP (IDOC) system.
    The scenario works perfectly fine for a party-less communication JMS -> PI -> IDOC
    Have already seen:
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system
    Thank you,
    Pankaj.

    You need to create party if its a B2B scenario
    Under Identifiers
    under agency select any standard agency , scheme name will automatical;ly get populated and name you can give manually as sender name
    Please refer this for more details
    http://help.sap.com/saphelp_nwpi71/helpdata/en/b9/64663c7a6c2545ae292fb26d8c33c4/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/81/104bb1fbab254c8644877c7f856bbf/content.htm
    Re: Party Configuration
    In case of cross company process it is required
    Regards
    Ninad
    Edited by: Ninad Sane on Nov 18, 2010 11:17 AM

Maybe you are looking for

  • Access SAP Tables from Java Program

    Hi All, We have a requirement to integrate attendance portal(which is done in java) with SAP. Our problem is how to access SAP tables from a Java program? Database is Sybase. Please suggest us a good solution. Thanks in advance...

  • Materialized view - fast refresh not working on joins

    Hello, Is it true that fast refresh for materialized view is not possible when I do a union of 2 tables, although both tables have materialized view logs ?

  • Change pointers problem

    I have created message type ZMATMAS  and I  want to see an entry in BDCP2 (Change pointers table) when ever any material is created or changed I did following steps until now.   1. Created ZMATMAS   2. Activated change pointers - BD61   3. Activated

  • Testing CAD-Desktop interface with CAD-system

    Hi, does anybody know if it is possible to get a CAD-system for free to test the CAD-Desktop interface of SAP? I am not a key CAD user, I just want to look how CAD Desktop works. Regards, Oliver

  • Missing field EENO_DYNP-ZEILE

    Dear all, In FS00 I've valued the field First note text line (EENO_DYNP-ZEILE). In what table I can find this value? Thanks in advance