How to convert Sony camcorder 1080i AIC .mov files to work with Photos app?

I have a Sony SDR-HD10 camcorder from 2008. It records in 1080i format, and I exported to .mov using the Apple Intermediate Codec, Linear PCM, Timecode format, 1920x1080; Color Profile HD (1-1-1); 2 channel audio.
I have 121 files totaling 105GB. These files all play fine in iMovie. BUT - when I open them in Quicktime X for Yosemite, it converts them into a file that is about twice the space on the drive. The resulting file is Apple ProRes 422, Linear PCM, Timecode, 1888x1062. It also resets the created and edited date/time.
I looked at each video and the resulting quality is about the same.
How can I convert these files into something that Photos will like, but not double in size?
Also, I should point out that I'm not certain I should be using Photos for movies. I used to use iPhoto for pictures, and iMovie for movies, but hardly ever cared to edit videos and thought iMovie was too bulky and confusing for general playback. With Photos, it will upload everything to the cloud (and I'm paying for it), so i can use Photos as my canonical source for all movies and pictures. I have iTunes Match, and my email is hosted by Google, so I'm getting closer to having everything in the cloud. so far, i haven't gone all in with Dropbox for documents, probably because I'm too paranoid about corruption on a remote device like that if there is any concurrent access.

Check out the export settings from iMovie. Your exporting in a very high grade format used for editing, you want a delivery format. Ask on the iMovie forum for more.

Similar Messages

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

How to convert a Final Cut Pro Movie File to uncompressed Quick Time

I have to send the highest quality file of my 20 sec sequence. It was edited from a converted file.
The settings are:
Vid Rte: 25fps, Frame Size 1024x576, Compressor DV-PAL, Pixel Aspect Square.
Audio: 48.0 KHz, 16-bit Integer
I exported the sequence: the FCP Movie File is 72.3MB. How to make a Quick Time without reducing it further through the Compressor?

See your other thread Ruth ... what you have created here is some kind of Frankenstein format that exists only in your laboratory.
By the way, an "FCP Movie" as you call it IS a QuickTime movie.

FCP Quicktime movie files not working with iDVD

I have been using iDVD for years with no issues. Now, whenever I export a QT file from FCP 7 and use it in iDVD, I get a blank screen with audio and no video.
I am able to work around the problem by using "Export Using Qucktime Conversion" and creating a smaller file, but I've never had to do that before. What in the world am I missing here? Shouldn't I be able to export as a QT movie, as long as the file is not gigantic? (the most recent one I used and had this problem occur was only about 500mb). Thanks for any help...
Ben

Hmmm,
Well this is helpful information but unfortunately didn't solve my problem. The movie in question is only 5 1/2 minutes long. When I export it as a QT movie, iDVD "acts" like everything is fine; I can preview it within iDVD, etc.But when I burn the disc, it comes out blank. I then went back to FCP and exported it using QT conversion, and the DVD burned just fine. (I exclusively use Taiyo Yuden media and have never had a bad disc).
This is just a simple 16:9 movie, shot at 720/30p on a Canon DSLR. I ingested with Log and Transfer using ProRes422, then dropped it onto the timeline, added a music track, rendered, and exported as Quicktime movie. It looks great on my desktop using the QT player, but it simply will not work in iDVD. Still stuck here...
Ben

HOW CAN I DOWNLOAD AND VIEW THE MOVIES I HAVE MADE WITH MY SONY CAMCORDER HDR-XR550VE?

HOW CAN I DOWNLOAD AND VIEW THE MOVIES I HAVE MADE WITH MY SONY CAMCORDER HDR-XR550VE?

Thanks for being so helpful. I chased up the web-link but was not sure it would work with .cpi, so didn't opt to buy it.
Then I went on to the Sony support page and found this - which works fine, and has very clear instructions.
http://support.sony-europe.com/tutorials/dime/imovietransfer/imovie.aspx?site=od w_en_GB&f=CAM&m=HDR-XR550VE
Once again many thanks for helping me along the path to success with this.
John

Could someone please tell me how to convert a powerpoint to a movie, with a voice over? thankyou :)

could someone please tell me how to convert a powerpoint to a movie, with a voice over? thankyou

Open the powerpoint presentation, on the click on the 'file' button located at the top left of the menu bar, click on 'save as' at the bottom of the window that opens you should see a dropdown format gliff that says powerpoin presentation .pptx; click on the gliff and choose 'movie.mov'

How on can get the plaback of .mov files with Redcode Codecs?

Hi folks,
I am not able to play the .mov files created by Red camera so..
how one can get the playback of .mov files with Redcode Codecs?

Well, one typically doesn't edit with any of the proxy-files the RED camera produces. You need to convert the RED footage to ProRes. Log and Transfer can do this, if you download and install the RED Log and Transfer plugin. Or you might need to use RED software to convert the footage to ProRes. But those Red proxy files won't import via log and transfer, and are NOT editable in FCP. Gotta convert to ProRes.

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

FCE only used AIC for HD.
Al

How to Convert iTunes Songs (Apple lossless audio file) to a MP3 for E-mail

How to Convert iTunes Songs (Apple lossless audio file) to a MP3 for E-mail?
My computer is Windows 7 and my Itunes software version is 1.0.2
Many thanks in advance...

iTunes 1.0.2 is +at least+ eight years old.
The current version is 9.2, and it's free.
If that was a typo, and you're using something more current:
In the iTunes preferences, change the import settings to mp3.
Then select the songs you wish to convert.
From the "Advanced" menu, choose "Create mp3 version".
When done, change the import settings back to Apple Lossless.
That's it.
BTW, this is the Logic Pro forum, which has absolutely nothing to do with iTunes.

Problems viewing 1080i/60 .mov files

I am having problems viewing 1080i/60 .mov files. When I open the file, it shows all white. I have exported some HD footage shot on my HVX 200. I am using FCP 5.0.4. I also have created some animated clips from Vue 6 Infinite and it does the same thing.
I have Quicktime Pro 7.1.5
does anyone have any suggestions on what to do, or what I need to download in order to have this work?
Thanks

Export from Final Cut using the Apple Intermediate codec to view in QuickTime.
You've probably exported using an HDV codec only used by Final Cut.

HT4053 how do i move files from videos to photos si i can send them via whatsapp etc

how do i move files from videos to photos si i can send them via whatsapp etc

What is it then? How and what exactly do i use it for? My i pad says there is not enough storage available so i have purchased more in i cloud. I now want to save some TV programmes and films to i cloud to free up some space but don't know how to... When you are told there is not enough space to download you are prompted to go to settings and to purchase more storage - so it is not unreasonable to assume that this will solve the problem - or am I missing something here? Or is this just a way for apple to get money out of me?
If this is not what it is meant for then what is it meant for? Is it just space to back up files to? If so then surely what i need is stored there - so i can delete the TV programmes from my i pad and grab them from i cloud later?
Am rather perplexed...

How can I get avi files to work with imovie08?

Hi I bought a macbook last year and have loved creating imovie videos by simply using the video function on my digital camera. My daughter was born last year and we have a great collection of clips of her first 7 months. I'd now like to take things a step further and put together a wedding video.
We had our wedding day filmed on a digital camcorder by a friend and he has given my 25MB of avi files which I would like to import into imovie and make into a video however I understand that this format isn't compatible. Is there a way of getting it to work and if so please can you tell me in very simple terms what I need to do to get the files to work with imovie? (I'm not very technical)
Thanks
Matt

I do not know of a way to import .avi files directly into iMovie, and I am positive that this is not actually possible as iMovie only supports the importation of .mov, .mp4 (mpeg4) and .dv filetypes.
What you could do is use a video converter (there are some good ones that are availible free, eg MPEG Streamclip (http://www.apple.com/downloads/macosx/video/mpegstreamclip.html)) to convert those avi movie files to either of the 3 video formats iMovie supports, then import them.
MPEG Streamclip does sound a little complicated for you but it is the best I have found, any more questions just post them here.

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

Convert .MXF Video files to work with Mac Editing software?

Hello,
Many thanks in advance for your attention.
Trying to find software that will edit .MXF Video Files to work with Mac.
As the edit is simple, prefer iMovie, but happy if the Conversion software only works with FCExpress (or even FCPro if that is the only alternative).
1. If it matters, .MXF (Material Exchange Format) Video files came from shooting on a Panasonic 500 P2. Originally downloaded onto a Windows system, using Adobe Premiere.
2. I just want to see and convert some of the shots I did for my Reel, etc., but I have a Mac.
3. I have iMovie HD, iMovie 09, and FCExpress (which I don't know how to use that well).
4. When I attach an External HD with backup files of all the footage shot, they show up named as .MXF files. They appear as VLC files (VLC icon), but the suffix is .MXF.
5. When I try to play them as VLC files, they won't play. It seems they start to play, but then the VLC software quits.
6. So I have tried downloading some software on the Internet that Google says converts .MXF files.
I tried: iSkysoft Video Converter, AVCWare Mac Video Converter, MPEG Streamclip, and a couple others. They all seem to have basically the same conversion setups, but when I click to pick one .MXF file, none of them recognize it. (The file in my Browse window is greyed out).
7. MoyaVideo Converter for Mac recognizes the .MXF file, but when I hit the "conversion" button - I tried a couple different settings, all it seems to convert is the first frame. Even if the .MXF file says a clip is 123MB or 43 seconds long, etc.
8. I can't even watch the clip in Preview. Press Play and it is just the first frame.
9. I have read elsewhere in these forums, some people touting conversion software from a company in Germany - mfxformac. I am fine with paying for conversion software, but $500?
Anyone's help would be greatly appreciated.

Many thanks for your response.
If this codec can only be read by Final Cut Pro, why do all these companies claim their software can convert .MXF files?

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro6,1
Processor Name:    Intel Core i7
Processor Speed:    2.8 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache (per Core):    256 KB
L3 Cache:    4 MB
Memory:    8 GB
Processor Interconnect Speed:    4.8 GT/s
Boot ROM Version:    MBP61.0057.B0F
SMC Version (system):    1.57f18

You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

How to convert Sony camcorder 1080i AIC .mov files to work with Photos app?

Similar Messages

Maybe you are looking for