How to convert spool no into ALV GRID ?

HI EXPERTS,
                      I am scheduling SAP REPORTS IN BACKGROUND through F9.
        The report output generated in sap spool "sp02" . Then output appears as list but my client wants in ALV grid.
so i go through the following link
http://wiki.sdn.sap.com/wiki/display/Snippets/ConvertSpoolListtoALV+Grid
when i am creating function module of that coding this come out with error
the type "MATCH_RESULT_TAB " is unknown.
i am using 4.7 version of sap.
or
if there is any other alternative solution.
thanks <promise removed by moderator>.
vikas
Edited by: Thomas Zloch on Feb 11, 2011 11:26 AM

Hi Bikas,
That MATCH_RESULT_TAB means Table with Search Results.I copied the sam progrm it is working.Tryto copy all.
That import Parameters and all. What is your sap version.
Regards,
Madhu.

Similar Messages

How to Convert Simple Report into ALV...

Hi All,
i have developed Simple now i want to convert this report in ALV grid Report.
how can i do it please Help..
my code is..
REPORT ZGSTT_YVENDORDTL_REPORT.
Tables :ZMSEG,LFA1.
DATA: BEGIN OF struct occurs 100,
MBLNR Type ZMSEG-MBLNR,
BLDAT Type ZMSEG-BLDAT,
LIFNR Type ZMSEG-LIFNR,
BOENR Type ZMSEG-BOENR,
name1 type lfa1-name1,
END OF struct.
types: comm2(16) type c.
data: itab like LFA1 occurs 1 with header line.
data: ind type i.
selection-screen: begin of block b1 with frame title comm2.
parameters: matno like ZMSEG-MBLNR.
select-options: ORDERDAT for ZMSEG-BLDAT.
selection-screen: end of block b1.
INITIALIZATION.
comm2 = 'Selection Screen'.
start-of-selection.
if matno is not initial and orderdat is not initial.
select * from ZMSEG into corresponding fields of table struct where MBLNR = matno and bldat in orderdat.
elseif matno is initial and orderdat is not initial.
select * from ZMSEG into corresponding fields of table struct where bldat in orderdat.
elseif matno is not initial and orderdat is initial.
select * from ZMSEG into corresponding fields of table struct where MBLNR = matno.
else.
select * from ZMSEG into corresponding fields of table struct.
endif.
select * from lfa1 into table itab.
loop at struct.
ind = sy-tabix.
read table itab with key lifnr = struct-lifnr.
if sy-subrc = 0.
move itab-name1 to struct-name1.
endif.
modify struct index ind transporting name1.
endloop.
SKIP TO LINE 5.
WRITE:SY-VLINE,(5) 'NO',SY-VLINE,(12) 'Bill of Date',SY-VLINE,(30) 'Vendor Name',SY-VLINE,(20) 'Material Document No.',SY-VLINE,(10) 'Bill of No.',SY-VLINE.
FORMAT COLOR OFF.
loop at struct.
write: / SY-VLINE,(5) count UNDER 'NO',SY-VLINE,(12) struct-BLDAT UNDER 'Bill of Date',SY-VLINE,(30) struct-name1 UNDER 'Vendor Name',SY-VLINE,(20) struct-MBLNR UNDER 'Material Document No.',SY-VLINE,(10) struct-BOENR UNDER 'Bill of No.',SY-VLINE.
endloop.
Thanks In Advance...
Yunus

Hi,
You can write your ALV programs in 2 methods by making use of classes or by making use of reuse function modules.
You can go through the following standard programs.
BCALV_FULLSCREEN_DEMO
BCALV_FULLSCREEN_DEMO_CLASSIC
regards,
Sangram

How to convert spool request to pdf format (to send mail) - SAP 3.1H

Hi,
   I am working in 3.1H version. How to convert spool request into pdf cormat to send a mail?. Spool request is in TEXT format.
regards,
sundaram J.

Hi sundaram,
1. I suppose u know how to send
    mail with attachment.
2. If that is the case,
   then no need to do anything.
3. Bcos
   There is setting in SCOT,
   for INTERNET
   ABAP List ---> PDF
   Raw TEXT -
PDF
(Your basis team will help u)
4. text data will get automatically converted
   to pdf and get mailed.
regards,
amit m.

Converting SPool information into HTML Format

Hi Friends,
How to Converting SPool information into HTML Format
and send this HTML INFORMATION INTO MAIL..
can anyone send program for this issue pls.
it is an urgent issue
regards,

Hi Rich,
once again thanks for your kindly reply.
but i am developing below Code.. that HTMAL AATCHMENTS ARE NOT COMING IN MAIL.
PLS can you you verify the below code.
                       DATA DECLARATIONS                             *
DATA: I_LIST   LIKE ABAPLIST OCCURS 0 WITH HEADER LINE,
      VARIANT LIKE RSVAR-VARIANT,
      DOC_CHNG LIKE SODOCCHGI1,
       RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE,
data: spoolid    type tsp01-rqident.
DATA IT_MAIL LIKE TSP01 OCCURS 0 WITH HEADER LINE.
data report_html like W3HTML OCCURS 0 WITH HEADER LINE.
DATA: G_ICONS(32) OCCURS 10 WITH HEADER LINE.
DATA LISTOBJECT LIKE ABAPLIST OCCURS 0 WITH HEADER LINE.
DATA sent_to_all like sonv-flag.
data : RECEIVER(30),
      spoolid    type tsp01-rqident,
       it_buffer like SOLI occurs 10 with header line.
data: list type table of abaplist with header line.
data: htmllines type table of w3html with header line.
data: maildata   like sodocchgi1.
data: mailtxt    like solisti1 occurs 10 with header line.
data: mailrec    like somlrec90 occurs 0 with header line.
                       TABLE DECLARATIONS                            *
TABLES : TSP01.
                           SELECTION-SCREEN                          *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP.
PARAMETERS : RQ2NAME LIKE TSP01-RQ2NAME .
            RQIDENT like TSP01-RQIDENT.
SELECT-OPTIONS : S_RECVR FOR RECEIVER NO INTERVALS.
SELECTION-SCREEN: SKIP.
SELECTION-SCREEN: END OF BLOCK B1.
                           START-OF-SELECTION                        *
START-OF-SELECTION.
PERFORM SEND_TO_SPOOL.
PERFORM GET_SPOOL_ID.
loop at it_mail.
    PERFORM CONVERT_SPOOL_TO_PDF.
    PERFORM SEND_MAIL.
endloop.
Save the list
call function 'SAVE_LIST'
       tables
            listobject         = list
       exceptions
            list_index_invalid = 1
            others             = 2.
*&      Form GET_SPOOL_ID
      Getting the Latest Spool Request Number
FORM GET_SPOOL_ID.
SELECT *
        FROM TSP01 INTO TABLE IT_MAIL
       and   RQIDENT    = RQIDENT.
          WHERE RQ2NAME   = RQ2NAME .
ENDFORM.                    " GET_SPOOL_ID
*&      Form CONVERT_SPOOL_TO_PDF
      Converting the Spool to PDF Document
FORM CONVERT_SPOOL_TO_PDF.
*--Assigning the Spool number
WRITE :/ IT_MAIL-RQIDENT.
spoolid = IT_MAIL-RQIDENT.
*--Converting the Spool to PDF
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
EXPORTING
    RQIDENT                    = spoolid
FIRST_LINE                 = 1
LAST_LINE                  =
TABLES
    BUFFER                     = it_buffer
EXCEPTIONS
NO_SUCH_JOB                = 1
NOT_ABAP_LIST              = 2
JOB_CONTAINS_NO_DATA       = 3
SELECTION_EMPTY            = 4
NO_PERMISSION              = 5
CAN_NOT_ACCESS             = 6
READ_ERROR                 = 7
OTHERS                     = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LISTOBJECT = IT_BUFFER.
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
EXPORTING
REPORT_NAME         =
   TEMPLATE_NAME       = 'WEBREPORTING_REPORT'
TABLES
    HTML                = report_html
    LISTOBJECT          = LISTOBJECT
   LISTICONS           = G_ICONS.
ENDFORM.                    " CONVERT_SPOOL_TO_PDF
FORM SEND_MAIL.
call function 'WWW_LIST_TO_HTML'
       tables
            html = htmllines.
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
    mailtxt = htmllines.
    append mailtxt.
endloop.
LOOP AT S_RECVR.
reclist-receiver = S_RECVR-LOW.
reclist-rec_type = 'U'.
append reclist.
call function 'SO_NEW_DOCUMENT_SEND_API1'
       exporting
            document_data              = maildata
            document_type              = 'HTM'
            put_in_outbox              = 'X'
       tables
            object_header              = report_html "mailtxt
            object_content             = mailtxt
            receivers                  = reclist "mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
if sy-subrc = 0.
write 'mail sent'.
endif.
ENDLOOP.
regards,
venu.

How to enable excel downloading in ALV grid report.

Hi all,
How to enable excal downing in ALV grid report?
Thanks in Advance.
Siva Sankar.

hi
check the following code
Example of a Simple ALV Grid Report
REPORT ZTUFI091                                .
*& Report ZDEMO_ALVGRID                                               *
*& Example of a simple ALV Grid Report                                 *
*& The basic requirement for this demo is to display a number of       *
*& fields from the EKKO table.                                         *
*REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid,
      gt_events     type slis_t_event,
      gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
              I.e. Field type may be required in-order for
                   the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-totals_only        = 'X'.
gd_layout-f2code            = 'DISP'. "Sets fcode for when double
                                        "click(press f2)
gd_layout-zebra             = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
            it_events               = gt_events
            is_print                = gd_prntparams
            i_save                  = 'X'
           is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL
Form TOP-OF-PAGE                                                 *
ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
           i_logo             = 'Z_LOGO'.
endform.
      FORM USER_COMMAND                                          *
      --> R_UCOMM                                                *
      --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
    WHEN '&IC1'.
Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
    Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
    Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
    Sxecute transaction ME23N, and skip initial data entry screen
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
ENDCASE.
ENDFORM.
*&      Form BUILD_EVENTS
      Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_PAGE' to ls_event-form.
    append ls_event to gt_events.
endif.
    read table gt_events with key name = slis_ev_end_of_list
                           into ls_event.
if sy-subrc = 0.
    move 'END_OF_LIST' to ls_event-form.
    append ls_event to gt_events.
endif.
endform.                    " BUILD_EVENTS
*&      Form BUILD_PRINT_PARAMS
      Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform.                    " BUILD_PRINT_PARAMS
*&      Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*&      Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
hope it will help you
regards
sreelatha gullapalli

Converting ME2N Output to ALV Grid

Hello,
Is there any Class or Function Module which converts the output of ME2N into ALV Grid.
Thanks and Regards,
Prabhjot Singh

Hi Prabhjot Singh,
you can select ALV Output in parameter "scope of list" within ME2n
Regards
REA

How to Convert spool which is for smartform output to PDF?

how to Convert spool which is for smartform output to PDF?
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF' is not working for smartform output,
if i use this there will be error spool not contain list output?
than whats the function module or way to convert spool contain smartform output to pdg?
regards,

<b>Procedure</b>
     When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
<b>Here is a sample code of program to perform the function.</b>
SAMPLE CODE
[code]*&---------------------------------------------------------------------*
*& Report ZAMIT_SMART_FORM_PDF                                        *
REPORT ZAMIT_SMART_FORM_PDF                    .
data: carr_id type sbook-carrid,
      cparam type ssfctrlop,
      outop type ssfcompop,
      fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
      pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
      tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
      file_size TYPE i,
      bin_filesize TYPE i,
      FILE_NAME type string,
      File_path type string,
      FULL_PATH type string.
parameter:      p_custid type scustom-id default 1.
select-options: s_carrid for carr_id     default 'LH' to 'LH'.
parameter:      p_form   type tdsfname   default 'ZAMIT_SMART_FORM'.
data: customer    type scustom,
      bookings    type ty_bookings,
      connections type ty_connections.
start-of-selection.
***************** suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook   into table bookings
           where customid = p_custid
           and   carrid in s_carrid
           order by primary key.
select * from spfli into table connections
           for all entries in bookings
           where carrid = bookings-carrid
           and   connid = bookings-connid
           order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
       exporting formname           = p_form
*                 variant            = ' '
*                 direct_call        = ' '
       importing fm_name            = fm_name
       exceptions no_form            = 1
                  no_function_module = 2
                  others             = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    exit.
endif.
* calling the generated function module
call function fm_name
       exporting
*                 archive_index        =
*                 archive_parameters   =
                 control_parameters   = cparam
*                 mail_appl_obj        =
*                 mail_recipient       =
*                 mail_sender          =
                 output_options       = outop
                 user_settings        = SPACE
                 bookings             = bookings
                  customer             = customer
                  connections          = connections
      importing
*                 document_output_info =
                 job_output_info      = tab_otf_data
*                 job_output_options   =
       exceptions formatting_error     = 1
                  internal_error       = 2
                  send_error           = 3
                  user_canceled        = 4
                  others               = 5.
if sy-subrc <> 0.
*   error handling
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   format                      = 'PDF'
   max_linewidth               = 132
*   ARCHIVE_INDEX               = ' '
*   COPYNUMBER                  = 0
*   ASCII_BIDI_VIS2LOG          = ' '
IMPORTING
   bin_filesize                = bin_filesize
*   BIN_FILE                    =
TABLES
    otf                         = tab_otf_final
    lines                       = pdf_tab
EXCEPTIONS
   err_max_linewidth           = 1
   err_format                  = 2
   err_conv_not_possible       = 3
   err_bad_otf                 = 4
   OTHERS                      = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
*    WINDOW_TITLE         =
*    DEFAULT_EXTENSION    =
*    DEFAULT_FILE_NAME    =
*    FILE_FILTER          =
*    INITIAL_DIRECTORY    =
*    WITH_ENCODING        =
*    PROMPT_ON_OVERWRITE = 'X'
CHANGING
    filename             = FILE_NAME
    path                 = FILE_PATH
    fullpath             = FULL_PATH
*    USER_ACTION          =
*    FILE_ENCODING        =
* EXCEPTIONS
*    CNTL_ERROR           = 1
*    ERROR_NO_GUI         = 2
*    NOT_SUPPORTED_BY_GUI = 3
*    others               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*************downloading the converted PDF data to your local PC********
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   bin_filesize                    = bin_filesize
   filename                        = FULL_PATH
   filetype                        = 'BIN'
*   APPEND                          = ' '
*   WRITE_FIELD_SEPARATOR           = ' '
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
IMPORTING
   filelength                      = file_size
TABLES
    data_tab                        = pdf_tab
*   FIELDNAMES                      =
EXCEPTIONS
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   OTHERS                          = 22
IF sy-subrc <> 0.
ENDIF.
[/code]
Thanks and Regards,
Pavankumar

How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie

How to convert word doc into pdf - which product of adobe i need to use- what upgrades - am a newbie - simple answers please - Thanks in advance.

@Pipeline2007 - which version of Microsoft Office have you got? Older versions of Acrobat aren't compatible with the latest versions of Office, see this link for info:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

How to get f4 help in alv grid in container-urgent

hi,
how to get f4 help in alv grid in container using abap objects
ganesh

Hi Ganesh,
Did you have a look at sample report BCALV_TEST_GRID_F4_HELP ?
Here is part of the header documentation:
*& Report BCALV_GRID_F4_HELP *
Purpose:
~~~~~~~~
This report illustrates the use of f4-Help in an alv grid control.
Background:
~~~~~~~~~~~
There a two possibilities to implement an f4-Help in the alv grid
control: one can either use standard f4-help or write one by Hand.
For the former there is nothing to do at all. This report shows how
to implement user-defined f4-help.
I am sure you will find within this report the solution you are looking for.
Reward points if this Helps.
Manish

How to convert jpeg files into word

How to convert jpeg files into Word

Hi Eugene,
I don't think you can convert an image to a Word document, but you could place the JPEG into a Word document using the Insert > Object command in Word.
For other questions relating to Word, you will probably have more luck getting an answer if you post on the Microsoft forums (we can help if you're using Acrobat, or another Adobe product, but you'll find the Word experts on the Microsoft forums.)
Best,
Sara

Prevent Occurence of list header and page breaks in spool file of ALV Grid

Prevent Occurence of list header and page breaks in spool file of ALV Grid Display.
When we run the ALV in background and create spool request then:
Spool file output is coming like this.
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
But the required is like this
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
Please suggest a posible answer

Hello all,
if you have not yet solved this on your own, here is my solution: use a format type that has 60000 lines per page for your spool output device.
It all depends on the format type that was used for creating the spool output.
By default (in our system), we have 65 lines per page. And after each page the column headings of the ALV will appear.
What i did:
create a new format type via transaction SPAD->full administration->device types->format types (copy an existing one)
change"Number of Rows" to 60000 or something applicable
edit the device type of your output device (e.g. LOCL) to contain the newly created format type (via SPAD; Button "Formats" in device type maintenance).
That's it! Be sure to use this format type for your output device in the "Background Print Parameters" window (-> Button "Properties").
Regards
Daniel Klein
All other parameters you discussed before didn't do it. All ALV-Settings will be overwritten by the output device settings and its print properties.

How to convert Date format into day in ssrs reports?

Hi
How to convert date format into day?
10/01/2010 as like Monday like that?

=weekdayname(datepart("w",Fields!mydate.Value))
-Vaibhav Chaudhari

How to insert new record in ALV GRID?

Hi all,
   I am displaying ztable data into grid format using method SET_TABLE_FOR_FIRST_DISPLAY of Class CL_GUI_ALV_GRID using OOPS concept.now i want to insert a new record into ALV grid?
If anyone has tried then please tell me?
Thanks and Regards,
Arpita

Hi Avinash,
Thanks for replay.
My problem is solved.i did it as follows.
HANDLE_DATA_CHANGED
      FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
           IMPORTING ER_DATA_CHANGED
                       E_UCOMM.
METHOD HANDLE_DATA_CHANGED.
LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO WA_GOOD_CELLS.
CASE WA_GOOD_CELLS-FIELDNAME.
WHEN 'ZCARRID'.
      CALL METHOD ER_DATA_CHANGED->GET_CELL_VALUE
          EXPORTING
            I_ROW_ID = WA_GOOD_CELLS-ROW_ID
            I_FIELDNAME = WA_GOOD_CELLS-FIELDNAME
          IMPORTING
            E_VALUE = ZCARRID1.
     WA_FLI-ZCARRID = ZCARRID1.
ENDMETHOD.
Using method CALL METHOD ER_DATA_CHANGED->GET_CELL_VALUE,
i am reading individual values and assinning it to WA and then insert into ZTBALE.
Thanks,
Arpita

How to trigger left_click_run event on ALV GRID

Hiiiiiiii........
Can any of u please tell me how to trigger left_click_run event on ALV GRID.
There is an event LEFT_CLICK_RUN and its a public accessed event. But the problem is , the corresponding attribute of this event "EVENT_LEFT_CLICK_RUN" which is needed to registered that event (We need to register our events through a method set_register_events using table of type cntl_simple_events...) is protect accessed. So I am unable to use that attribute...Could u please tell me is there any alternative way to register that event.......ANY POSSIBLE WAY?
Thanks in advance,
Rams

I think you should use event selection_changed. Note that you shouldn't allow multiple selection for the tree at the same time, i.e. use: create object g_tree exporting \[...\] node_selection_mode = cl_gui_column_tree=>node_sel_mode_single.
For more information, see this thread: Urgently required : cl_gui_alv_tree single_click event...

How to convert Doc file into image

hello frnds
Can any body guide me how to convert doc file into image and show into swf loader.
actually i have to convert doc files into swf files in runtime so that i have to use this flow.
is it possible to convert doc file into byte array and than convert into image.
Thanks And Regards
Vineet Osho

You can convert any DisplayObject to byeArray using this function ImageSnapshot.captureBitmapData().getPixels()

How to convert spool no into ALV GRID ?

Similar Messages

Maybe you are looking for