How to convert the sql query result into xml ? PLease..Please..

I have a table Submission Record which contain a field with mix with text string and xml data type.
Table name: Submission Record
Field name: RCA
Jason
Tomato
<Record>AA</Record>
Fish
Brother
<Record>BB</Record>
<Record>CC</Record>
Tom is a girl
Its mixing with text and xml data.
I wish to convert all into xml data as per request from management.
my select statement is like below...but i think it may contain syntax error. Wish to get help from here.
sqltestagain = "select '<DATA>' || RCA || '</DATA>' from Submission Record".
Expect below will display
<DATA>Jason</DATA>
<DATA>Tomato</DATA>
<DATA><Record>AA</Record></DATA>
or any other solution for it ??
I've tried FOR XML....DBMS_XML......but none of it worked.....

also look at xmlelement
SQL> select xmlelement("DATA", rca).getstringval() from
2 (
3 select 'Jason' RCA from dual union all
4 select 'Tomato' from dual union all
5 select '<Record>AA</Record>' from dual
6 )
7 /
XMLELEMENT("DATA",RCA).GETSTRI
<DATA>Jason</DATA>
<DATA>Tomato</DATA>
<DATA><Record>AA</Record></DATA>
SQL>

Similar Messages

How to insert the select query result into table?

How to insert the select query result into table?
SELECT top 20 creation_time
,last_execution_time
,total_physical_reads
,total_logical_reads
,total_logical_writes
, execution_count
, total_worker_time
, total_elapsed_time
, total_elapsed_time / execution_count avg_elapsed_time
,SUBSTRING(st.text, (qs.statement_start_offset/2) + 1,
((CASE statement_end_offset
WHEN -1 THEN DATALENGTH(st.text)
ELSE qs.statement_end_offset END
- qs.statement_start_offset)/2) + 1) AS statement_text
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
ORDER BY total_elapsed_time / execution_count DESC;
Thanks,
Tirumala

1. SELECT INTO
Below method will create table when data is inserted from one table to another table. Its useful when you need exactly same datatype as source table.
Use AdventureWorks2008R2;
Go
---Insert data using SELECT INTO
SELECT AddressLine1, City
INTO BothellAddresses
FROM Person.Address
where City = 'Bothell';
GO
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
2. INSERT INTO SELECT
Below method will need table to be created prior to inserting data. Its really useful when table is already created and you want insert data from
another table.
Use AdventureWorks2008R2;
Go
---Create Table
CREATE TABLE BothellAddresses (AddressLine1 NVARCHAR(60), City NVARCHAR(30))
---Insert into above table using SELECT
INSERT INTO BothellAddresses(AddressLine1, City)
SELECT AddressLine1, City
FROM Person.Address
where City = 'Bothell';
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Storing the SQL Query results as XML

Hi All,
I have a proc to select all the data from emp table and insert into another table. For some reason it inserts only one column and one record.
I don't have any row limit or skip ...
CREATE OR REPLACE procedure Convert_Data_Into_XML1
as
-- Var Declartion
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
BEGIN
qryCtx := dbms_xmlgen.newContext('SELECT * from emp');
-- set the row header to be EMPLOYEE
DBMS_XMLGEN.setRowTag(qryCtx, 'Employee-ROW');
DBMS_XMLGEN.setRowsetTag(qryCtx, 'Employee-rowset');
LOOP
-- now get the result
result := DBMS_XMLGEN.getXML(qryCtx);
DBMS_OUTPUT.PUT_LINE ('In the Loop');
EXIT WHEN DBMS_XMLGEN.getNumRowsProcessed(qryCtx) = 0;
INSERT INTO temp_clob_tab VALUES (result);
END LOOP;
COMMIT;
--close context
DBMS_XMLGEN.closeContext(qryCtx);
exception
when others then
dbms_output.put_line(TO_CHAR(sqlerrm));
END;
Basically I got this sample proc from Oracle website. As per the website I should be able to store all the records from emp table.
How can I debug this.
Here is the output from SQLPLUS>
SQL> select result from temp_clob_tab;
RESULT
<?xml version="1.0"?>
<Employee-rowset>
<Employee-ROW>
<EMPNO>7369</EMPNO>
>>>>>>>>>>
Thanks in advance
Siva

I am able to convert the SQL query output and I am able to store it in a XMLTYPE column.
But the code doesn't work when I took the same code and try to Implement inside a Trigger. The reason I am doing this is, when there is an update or delete, I want to store the whole record as a XMLTYPE doc (before and After). But the code compiles fine, but when I tried to update a record it gives error.
CREATE OR REPLACE TRIGGER INS_UPDDEV_EMP3_F
BEFORE UPDATE OR DELETE ON EMP
FOR EACH ROW
DECLARE
V_DBUSER VARCHAR2(50);
V_CHANGETYPE VARCHAR2(20) := 'INSERT' ;
QRYCTX DBMS_XMLGEN.CTXHANDLE ;
OLDVALUE XMLTYPE;
NEWVALUE XMLTYPE;
BEGIN
IF :OLD.EMPNO <> :NEW.EMPNO or DELETING then
---------- old Value
QRYCTX := DBMS_XMLGEN.NEWCONTEXT ('SELECT :OLD.EMPNO, :OLD.ENAME, :OLD.JOB, :OLD.MGR, :OLD.HIREDATE, :OLD.SAL, :OLD.COMM, :OLD.DEPTNO FROM EMP WHERE EMPNO=:OLD.EMPNO ');
DBMS_XMLGEN.SETROWTAG (QRYCTX, 'DEPTROW');
DBMS_XMLGEN.SETROWSETTAG(QRYCTX, 'DEPTSET');
OLDVALUE := XMLTYPE(DBMS_XMLGEN.GETXML(QRYCTX));
------------------------- new Value
QRYCTX := DBMS_XMLGEN.NEWCONTEXT ('Select * WHERE EMPNO=:NEW.EMPNO '); -- WHERE :OLD.EMPNO
DBMS_XMLGEN.SETROWTAG (QRYCTX, 'DEPTROW');
DBMS_XMLGEN.SETROWSETTAG(QRYCTX, 'DEPTSET');
NEWVALUE := XMLTYPE(DBMS_XMLGEN.GETXML(QRYCTX));
V_CHANGETYPE := 'UPDATE' ;
INSERT INTO ADM_RECAUDITHISTORY VALUES ('table emp', 'fIELD all', OLDVALUE, OLDVALUE,
V_CHANGETYPE , SYSDATE, 'TIGER TRIG');
commit;
END IF;
END;
I am getting the following error while updating the record.
>>>>
ERROR at line 1:
ORA-19206: Invalid value for query or REF CURSOR parameter
ORA-06512: at "SYS.DBMS_XMLGEN", line 83
ORA-06512: at "SCOTT.INS_UPDDEV_EMP3_F", line 13
ORA-04088: error during execution of trigger 'SCOTT.INS_UPDDEV_EMP3_F'
>>>>>
Is anyone knows why I am getting this error.
Thanks
Siva

How to get the sql query result?

Hi,
Currently I am using LV2012 to connect a Oracle database server. After the installations/settings for Oracle Express and Oracle ODBC driver done.
I am sucessfully to use the SQL command to query the data through my window command prompt.
Now the problem is, how I do the same task in Labview by using the database connectivity toolkits?
I have build a VI for query as attached, but i have no idea what pallete to use to get the query result.
Please help me ~~
Solved!
Go to Solution.
Attachments:
Query.vi ‏9 KB

Here is a piece of code I use to test SQL commands, you can use the part that retrieves sql results.
It is also possible to get the column headers back, but that is for next lesson!
Attachments:
RunSQLCommand.vi ‏30 KB

How to convert the DMS Pdf file into XSTRING - Urgent Please......

Experts,
I want to download a pdf file stored in a DMS Server into Desktop using webdynpro for abap.
First i want to convert the PDF file into XSTRING, so that i can use file download UI Element in Webdynpro to download the document...
Im searching for any function modules for past two days, i cant able to find it.. I dont even have any idea to proceed.
I tried using CV120_START_APPLICATION in webdynpro,but it results in vain...
I object submission date is nearing, please help me brothers and sisters...
Thanks,
James...

Hi James,
please see the thread
Very Urgent Convert DMS document to XSTRING/ download
which deals with exactly the same issue. Maybe we can close one thread and handle this within the second one.
Best regards,
Christoph

How to send SQL query results to XML ?

Hey Guys, I am querying a DB with huge amount of traffic. A user select a particular lot and then details of the lot will be displayed in the following page. My concern here is that it takes really LONG to retrieve back the results coz it has to requiry in the following JSP page.
I was told to use XML to retrieve the dataset and store it. Hence, in the following query it will re-query only from the recordsets in the XML file (...Logically, should be faster rite ? ). Hence, how do parse my recordsets retrieved from the SQL query to an XML file ?
Any sort of suggestion , help, reference would be deeply appreciated ..Thanks !

<HTML>
<BODY>
<H1>Manufacturing Summary beta </H1><BR>
<%@ page import="java.sql.*" %>
<%@ page import="java.lang.*" %>
<%@ page import="java.text.*" %>
<jsp:include page="/index.html" flush="true"/>
<P><B>Returned result<B><BR>
<B>Query String :</B><%=request.getParameter("date") %>
<TABLE BORDER=1 cellpadding=0 cellspacing=0>
<%!
static double roundDouble(double toBeRounded, int fractionDigits)
NumberFormat format = NumberFormat.getInstance();
format.setMaximumFractionDigits(fractionDigits);
String tempDouble = format.format(toBeRounded);
return Double.parseDouble(tempDouble);
%>
<%
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@klmomnidb:1521:
OMNIDB","omni","omni");
Statement stmt = null;
ResultSet rset = null;
String S_date = new String();
String temp = new String();
String lot_id = new String();
String result = new String();
String SQL_String = new String();
double yield;
int bad_cnt;
S_date = request.getParameter("date");
lot_id = request.getParameter("lot_id");
temp = request.getParameter("TST_TEMP");
SQL_String = "SELECT LOT_ID, FLOW_ID, TST_TEMP, MODE_COD, RTST_COD, PART_CNT, GO
OD_CNT, OPER_NAM, JOB_REV, PROC_ID, START_T, FACIL_ID, TSTR_TYP, NODE_NAM FROM L
OT where START_T > TO_DATE('"+ S_date + "','MM/DD/YYYY') AND TST_TEMP <='" + tem
p+"' order by START_T";
out.println(SQL_String);
stmt = conn.createStatement();
rset = stmt.executeQuery (SQL_String);
out.println("<TR>");
out.println("<TD> Select Lot(s)</TD>");
out.println("<TD>Flow </TD>");
out.println("<TD>Temp </TD>");
out.println("<TD>Test Mode </TD>");
out.println("<TD>Retest</TD>");
out.println("<TD>Total </TD>");
out.println("<TD>Good</TD>");
out.println("<TD>Bad</TD>");
out.println("<TD>Yield </TD>");
out.println("<TD>UserID</TD>");
out.println("<TD>Program</TD>");
out.println("<TD>Mask</TD>");
out.println("<TD>Start Time </TD>");
out.println("<TD>Loc </TD>");
out.println("<TD>Tester</TD>");
out.println("<TD>System </TD>");
out.println("</TR>");
if (! rset.next()) {
result ="No records found matching seach criteria.";
while (rset.next()) {
bad_cnt = Integer.parseInt(rset.getString(6)) - Integer.parseInt(rset.getString(
7));
yield = (Double.parseDouble(rset.getString(7)) / Double.parseDouble(rset.getStri
ng(6))) * 100;
result= "<TR>";
result = result + "<TD><a href=coolpage.jsp?LOT_ID=" + rset.getString(1)+ ">" +
rset.getString(1) + "</A></TD>";
result = result + "<TD>" + rset.getString(2) + "</TD>";
result = result + "<TD>" + rset.getString(3) + "</TD>";
result = result + "<TD>" + rset.getString(4) + "</TD>";
result = result + "<TD>" + rset.getString(5) + "</TD>";
result = result + "<TD>" + rset.getString(6) + "</TD>";
result = result + "<TD>" + rset.getString(7) + "</TD>";
result = result + "<TD>" + bad_cnt + "</TD>";
result = result + "<TD>" + roundDouble(yield,2) + "% </TD>";
result = result + "<TD>" + rset.getString(8) + "</TD>";
result = result + "<TD>" + rset.getString(9) + "</TD>";
result = result + "<TD>" + rset.getString(10) + "</TD>";
result = result + "<TD>" + rset.getString(11) + "</TD>";
result = result + "<TD>" + rset.getString(12) + "</TD>";
result = result + "<TD>" + rset.getString(13) + "</TD>";
result = result + "<TD>" + rset.getString(14) + "</TD>";
result = result + "</TR>"; %>
<%=result%>
<% }
rset.close();
stmt.close();
conn.close();
%>
<%=result%>
</TABLE>
</BODY>
</HTML>

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to save the workbook's result into table ?

Dear all:
Now I need to output the workbook's result into ta table ,what can i do now?
If I save a query's result into a table use rscrm_bapi,if the query have two structures ,the result table looks not well, how can do do?

Read the help files about APD

How to convert the x/y pixel into Lat/Lon?

Does anyone know how to covert the X/Y coord into Lat?lon coord system? What is the formular?
Thanks!!!
Ming

Depends on the projection your map is using.

How to view the sql query generated in query designer..?

Hi experts,
Can i view the sql query generated by the query designer for a query in sap bw?
regards,
ksvsivam

Hi Sivam,
You can definitely view the sql query.
Go to RSRT and give the report name. Then goto Execute+Debug and click on it.
A new window will open, there tick the box Display SQL/BIA Query and the press on the ok button.
Finally click on execute. The Sql query will be displayed.
Hope this helps.
Thanks,
Rahul

How to convert the following query to sql server 2005

hi
i have the following query in ms access and i want to convert it into sql server 2005 express edition
SELECT iif(Max(BNo) is null,1,Max(BNo)+1) AS BNo from ( SELECT iif(Max(Product.BNo) is null,0,Max(Product.BNo)) AS BNo FROM Product union all SELECT iif(Max(grndetail.BNo) is null,0,Max(grndetail.BNo)) AS BNo FROM grndetail UNION ALL SELECT iif(Max(srdetail.BNo) is null,0,Max(srdetail.BNo)) AS BNo FROM srdetail ) as t
how to do this

The construct involving case when MAX sounds suspicious. Can you explain what the query is supposed to be doing, the structure of your table, then we can re-write it?
E.g. if you provide your table, some data and desired result, you'll get better answer than direct translation of this suspicious query.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

How to convert an sql query into a recordset?

HI, I'm having a hard time building a locations of service form for users to insert, update the cities, counties, zip codes based on the states selected.
so I found this query that works great if I use basic menus and text boxes, but can't use to make comma separated menus because it is nat a record set.
The problem is that I have a table called zip_codes, with the following fields: state_label, Zip_b, county, city.
zip codes correspond to the cities, counties and states.
example:
Colorado, Colorado Springs, El Paso, 80918
Users make a selection of state or states and the recordset is filtered by user selection.
I manage the part of making a select mutiple drop menu that passes the values to my query page like this.
<form action="litsTA.php"; method="post">
<h3>Choose State(s)</h3>
<p>hold Control key to select multiple states</p>
<select name="States_served[]_<?php echo $cnt1; ?>" multiple="multiple" onchange='showselection()'>
<?php
do {
?>
<option value="<?php echo $row_state['state_label']?>"><?php echo $row_state['state_label']?></option>
<?php
} while ($row_state = mysql_fetch_assoc($state));
$rows = mysql_num_rows($state);
if($rows > 0) {
mysql_data_seek($state, 0);
$row_state = mysql_fetch_assoc($state);
?>
</select>
<p>
<input type="submit" value="submit" />
</p>
</form>
And the query I need to convert into a recordset looks like this
mysql_select_db($database_duitop, $duitop);
$query_TONY = "SELECT * FROM zip_code WHERE state_label IN (";
for ($i=0; $i<=count($state_list)-1; $i++) {
//echo $state_list[$i];
$query_TONY = $query_TONY . "'" . $state_list[$i] . "'";
if ($i < count($state_list)-1) {
$query_TONY = $query_TONY . ", ";
$query_TONY = $query_TONY . ") GROUP BY county ORDER BY state_label, city ASC";
Any way that was my attempt to converting the query into a recordset.
any help, or samples will be appreciated.

Use Tcode SQ01.
Give the query name press Enter.
The query will be listed in the table below.
Select the Query => From the Main menu select QUERY => More Functions => Display Report Name.
You will get the program name, now go to Se38 and display the program...

How to check the sql:query is return null value

I have use :
<sql:query var="sql1" dataSource="${db}">
select col_name from table_name
where a=<c:out value="${row.test1}"/>
and b='<c:out value="${row.test2}"/>'
</sql:query>
So, how can I check this statement return null value which is no record within this table?

The Result should never be null but can be empty. You can check if the Result is empty using an if tag and checking the rowCount property:
    <sql:query var="books"
      sql="select * from PUBLIC.books where id = ?" >
      <sql:param value="${bookId}" />
    </sql:query>
     <c:if test="${books.rowCount > 0}">
     </c:if>http://java.sun.com/j2ee/1.4/docs/tutorial/doc/JSTL7.html#wp84217
Look for query Tag Result Interface

How to get the dynamic query result

If in one query, there is the amount range dimension, based on different dimension value combination, the customer revenue should be refreshed into different range, how to make it by cube?
eg.
Customer Store    Material Month    Amount
C001     M & S    Tennis    2005/01   "10"
C001     Douglas Tennis    2005/02   "60"
C002     M & S    Soccer    2005/01    "1"
C002     M & S    Soccer    2005/02    "50"
C002     M & S    Tennis    2005/02    "50"
C003     Douglas Tennis    2005/01    20
Query condition:
Time Customer Amount Range     Amount
2005 C001     0~50_____________0
2005 C001     51~100___________70
2005 C001     100 +____________0
2005 C002     0~50_____________0
2005 C002     51~100___________0
2005 C002     100+_____________101
2005 C003     0~50_____________20
2005 C003     51~100___________0
2005 C003     100+_____________0
However, if I drill down Time into month, the result is total different, I only list the result related to customer C001
Time     Customer Amount Range    Amount
2005/01 C001      0~50____________10
2005/01 C001      51~100__________0
2005/01 C001      100 +___________0
2005/02 C001      0~50____________0
2005/02 C001      51~100__________60
2005/02 C001      100 +___________0
Any good solution on that? Thanks for any input.
Message was edited by: Lei Shao

Hi, Sen,
I used your solution in my infocube and query, where I created a structure with 'between'. However, it is still the simple summation in different amount range.
Just like the following:
Sales ORG / Sales Office / Sales Rep / Amount
East      / Atlanta      / 1001      / 3
East      / Atlanta      / 1002      / 4
So the query result is the same:
S-ORG / S-Office / S-Rep / Amount Range / Amount
East / Atlanta / 1001 / 0~5          / 3
East / Atlanta / 1001 / 5+           / 0
East / Atlanta / 1002 / 0~5          / 4
East / Atlanta / 1002 / 5+           / 0
When I remove 'drill down' for Sales Rep, the result is:
S-ORG / S-Office / Amount Range / Amount
East / Atlanta / 0~5          / 7
East / Atlanta / 5+           / 0
However our expection for the result is different, because in business traction, if we remove sales rep, the sales org and sales office will get the sub-total like this: (we can image it with ABAP program sub-total)
Sales ORG / Sales Office / Amount
East      / Atlanta      / 7
So our expection for the result is:
S-ORG / S-Office / Amount Range / Amount
East / Atlanta / 0~5          / 0
East / Atlanta / 5+           / 7
Therefore, any good suggestion for this?
Thanks a lot
Regards,
LS

How to get an sql query result to a textbox?

i am working with jdk1.4 and office 2003.
i need to run the following SQL Query: "SELECT max(BookId) as BookId FROM Books" where BookId is an autonumeric generated number obtained from the field autonumber in access 2003 database.
now, the result of this must be placed in a textbox.
does anyone knows how to do this?
I ve tried this but nothing happens and niether any error comes
st = con.createStatement ();     //Creating Statement Object.
long bookNo;          //Use for Comparing the Book's Id.
try {     //SELECT Query to Retrieved the Record.
String q = "SELECT max(BookId) as BookId FROM Books";
ResultSet rs = st.executeQuery (q);     //Executing the Query.
bookNo = rs.getLong ("BookId");          //Storing the Record.
bookNo =(bookNo+1);
txtBookId.setText (""+bookNo);
catch (SQLException sqlex) { }
does anyone knows how to do this?????plz help me out.
Thanks
Aanchal

Hi Aanchal,
If an SQL error occurs now, you cannot see it in your code. You should do something with the exception you catch, e.g. printing it: sqlex.printStackTrace(), so that you can see if something goes wrong.
For your number, you should move the cursor in the resultset to the first row - either by: calling first( ) or next ( ), then you can retrieve your booknumber.
Best Regards,
Martijn

How to convert the sql query result into xml ? PLease..Please..

Similar Messages

Maybe you are looking for