How to copy a function PRPRI

Hi,
I have the following problem. The client need that the logic of the "Deduction" in payroll, gets reversed the priorities of deduction when a termination is done.
So, I think to make the following: in the schema, copy the PRPRI and add a IF when a Termination is run, and with a copy (ex: ZRPRI) gets the priorities instead from A to Z, from Z to A. It solved the requirement.
The problem is, how can I copy PRPRI?
Thanks,
Ruben

You may try creating a new function (ZPRPI) and use the same input and output parameters as PRPRI and then modify as per your requirements.

Similar Messages

How to copy the function group

hi there,
i want to copy the function group 2012. plz let me know the possibility.

use FM <b>RS_FUNCTION_POOL_COPY</b> to copy
Look at this thread
how to copy the function group

Copy the Function Module one server to another server

Hi Guy's,
Please help me How to copy the Function module from one server to another server.
Present requirement is like this, copy the FM from DRH-100 to NRH-100.
Thanks and Regards,
Sai

if it is a zfm, u might have assigned a TR when cretaing this FM.so u need to relese this TR to the desired system.contact ur BASIS for the transport lanscape.
if it is a standard FM, u better copy this FM to a ZFM and make it as RFC enabled if it is not RFC enabled and call this ZFM from the system in which want to call this FM by giving the logical system id in the destination while calling this FM.

How to copy function group from one SAP system to another

dear all,
our company will set up a sub-company currently,and the sub-company want to copy some programs from our SAP system.
how to pack and copy function group?
pls help me,tks!

Hello Snow zeng,
Will the 2 systems be connected ? I.e Same land scape ?
If they are non connected systems, check this Wiki by Marcin [How to copy Repository Objects between non-connected SAP systems|http://wiki.sdn.sap.com/wiki/display/ABAP/HowtocopyRepositoryObjectsbetweennon-connectedSAPsystems]
Regards

How to add cut,copy,paste functionality ?

Hello everybody,
I have to add cut,copy,paste functionality to my RichTextEditor for which I have already added
buttons to editors toolbar,Now I want to add these three functionalities to my editor.
Can anyone tell me or provide me some code sample for it ?
Thanks

Well Thank you for your response,What I am looking for is ,the user should be able to copy,cut and paste the selected text anywhere,
(e.g.If user selects the text and clicks the COPY button on the RichTextEditor , he can copy that selected text into notepad or any other editor or any other place in the system)
I have written the code for copy and its working properly
System.setClipboard(richTextEditor.selection.text);
I was wondering how to write the code for cut and paste.
many thanks again

How to use Copy-Value function?

Dear Friends,
I have query on how to use Standard function Copy-Value.
Please have a look @ the help.sap.com example use of Copy-Value function.
http://help.sap.com/saphelp_nw70/helpdata/en/26/d22366565be0449d7b3cc26b1bab10/content.htm
I have designed the same example. Please see the mapping I've defined for this example :
http://www.flickr.com/photo_zoom.gne?id=930440086&size=o
Please see the resuts, its working perfectly. See the top image :
http://www.flickr.com/photo_zoom.gne?id=930440300&size=o
Ok, now lets come to the issue. Please consider the same example , If I have more than one partner
and I want to use the address field to the customer street,city & zipcode using copy-value function, how will I achieve this?
Please see the resuts.See the bottom image :
http://www.flickr.com/photo_zoom.gne?id=930440300&size=o
I think you all got the issue, if not please reply back.
Looking for your answers!!!
Best regards,
raj.

The CopyValue function considers only values in the first context of the queue.
When the queue has more contexts, the other contexts are ignored.
In online help, the element addrDat is 3 times under name, that means 3 values are in the first context.
That means: For the first occurrence of the partner it is correct, for all other partners, the values of the first context is taken. The online help does not express this, so it is misleading and should be changed to an example where address is not beyond a node with occurrence inbounded.
In practical cases the copyValue can only be used for values that appear in source just one time, like the IDOC header fields, as it works like a constant.
Regards
Stefan

How do I copy a function throughout rows?

For example, I want to sum c2,g2. Then c3,g3. Then c4,g4. Is there a way to copy the function without having to hand enter the function on every row?

Do you know that Numbers User Guide was not designed to help helpers to help you ?
It's also for your own use.
Yvan KOENIG (VALLAURIS, France) dimanche 13 janvier 2011 20:56:51
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How to implement copy paste functionality with IE

Hi Experts,
I am working on jdev 11.1.1.6.0, I have requirement to implement copy & paste functionality with IE Browser in ADF table. I have followed below link to implement the functionality.
http://one-size-doesnt-fit-all.blogspot.com/2011/04/aftable-restoring-basic-browser-copy.html
But copy&functionality is working fine, but when table loading I lost vertical/horizontal scroll bar. Can any one suggest me what is wrong here/what i am missing here.
My logic:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:sni="/SNIDeclarativeComponentLib">
<c:set var="tumuiBundle" value="#{adfBundle['sni.tum.view.TestUIBundle']}"/>
<af:resource type="javascript">
    var globalLastVisitedField = null;
    function captureTableFieldName()
      return function (evt)
        evt.cancel();
        globalLastVisitedField = evt.getSource();
    function copyMenu(evt)
      if (globalLastVisitedField == null)
        alert("copyMenu() Error: No field could be
                                 identified to be in focus");
      else if (navigator.appName != "Microsoft Internet
                                 Explorer")
        alert("Copy function is only
                                 supported in Microsoft Internet Explorer");
      else
        var txt = globalLastVisitedField.getProperty("ItemValue");
        window.clipboardData.setData('Text', "" + txt);
      evt.cancel();
</af:resource>
<af:subform id="f1" defaultCommand="srchcb">
    <af:panelStretchLayout id="psl1" topHeight="auto" bottomHeight="auto"
                           styleClass="AFStretchWidth">
      <f:facet name="center">
        <af:panelCollection id="tab" styleClass="AFStretchWidth">
          <af:table value="#{bindings.TestVO.collectionModel}"
                    var="row"
                    rows="#{bindings.TestVO.rangeSize}"
                    emptyText="#{bindings.TestVO.viewable ? 'No data to display.' : 'Access Denied.'}"
                    fetchSize="#{bindings.TestVO.rangeSize}"
                    rowBandingInterval="1"
                    selectionListener="#{bindings.TestVO.collectionModel.makeCurrent}"
                    rowSelection="multiple"
                    id="Table" styleClass="AFStretchWidth"
                    contentDelivery="immediate">
            <f:facet name="contextMenu">
              <af:popup id="pMenu" contentDelivery="lazyUncached">
                <af:menu id="mMenu">
                  <af:commandMenuItem text="Copy" id="cmiCopy">
                    <af:clientListener method="copyMenu" type="action"/>
                  </af:commandMenuItem>
                </af:menu>
              </af:popup>
            </f:facet>
            <af:column sortProperty="Name" sortable="true"
                       headerText="#{bindings.TestVO.hints.Name.label}"
                       id="c33">
              <af:outputText value="#{row.Name}" id="Nam">
                <af:clientListener method="captureTableFieldName()"
                                   type="contextMenu"></af:clientListener>
                <af:clientAttribute name="ItemValue"
                                    value="#{row.Name}"></af:clientAttribute>
              </af:outputText>
   </af:column?
   </af:Table>
-Thanks.

Hi,
I can't tell. What I can tell is that the code in the sample you reference for sure doesn't cause this - but it doesn't help you I guess.
Btw.: Here is a solution that works on all browsers. The solution in the blog (Chris - please forgive me) is a bit awkward to be honest.
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/012-copy-table-cell-values-169137.pdf
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/tablecellcopypaste-168499.zip
Frank

How to copy file from application server

Hello experts,
How to copy file from one folder of application server and paste it to other folder of application server(application server is same)?
Is there any function module exists???
thanks in advance
Saurabh

Hi you can use this function module to move a file from application server to another folder on application server.
call function 'WS_FILE_COPY'
           exporting
                destination = m_destination
                source      = m_source
           importing
                return      = return.
Plus u can use this function module to delete the file from that folder from which u want to replace it.
      call function 'WS_FILE_DELETE'
           exporting
                file   = m_source
           importing
                return = return.
The above FM can help u copy a file from one folder to another and delete the file from that folder.

How to Copy a Long Column in PL/SQL

Hello. Can anyone tell me how to copy a table that contains a long column? I am using Oracle 8.0.5 SQL Worksheet
with the following code that generates an ORA-06502: PL/SQL: numeric or value error.
CREATE TABLE "Tmp_CB_REPORT"
     CB_RPT_ID NUMBER(38, 0),
     CB_ID NUMBER(38, 0),
     CB_REGION_ID NUMBER(38, 0),
     WHEN_PULLED DATE NOT NULL,
     PARSED NUMBER(1, 0) DEFAULT (0) NOT NULL,
     RAW_DATA LONG NOT NULL,
     JOINT NUMBER(1, 0) DEFAULT (0) NOT NULL,
     RPTTYPE NUMBER(38, 0) NOT NULL,
     OPTION1 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION2 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION3 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION4 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION5 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION6 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION7 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION8 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION9 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION10 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION11 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION12 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION13 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION14 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION15 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION16 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION17 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION18 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION19 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     OPTION20 NUMBER(1, 0) DEFAULT (0) NOT NULL,
     REGION_ID NUMBER(38, 0),
     RPT_TYPE_DESC VARCHAR2(40)
LOCK TABLE CB_REPORT IN EXCLUSIVE MODE NOWAIT;
DECLARE
     CURSOR datacursor IS SELECT CB_RPT_ID, CB_ID, CB_REGION_ID, WHEN_PULLED, PARSED, RAW_DATA, JOINT, RPTTYPE, OPTION1, OPTION2, OPTION3, OPTION4, OPTION5, OPTION6, OPTION7, OPTION8, OPTION9, OPTION10, OPTION11, OPTION12, OPTION13, OPTION14, OPTION15, OPTION16, OPTION17, OPTION18, OPTION19, OPTION20, REGION_ID, RPT_TYPE_DESC FROM CB_REPORT;
     datarecord datacursor%ROWTYPE;
BEGIN
     OPEN datacursor;
     LOOP
          FETCH datacursor INTO datarecord;
          EXIT WHEN (datacursor%NOTFOUND);
          INSERT INTO "Tmp_CB_REPORT"(CB_RPT_ID, CB_ID, CB_REGION_ID, WHEN_PULLED, PARSED, RAW_DATA, JOINT, RPTTYPE, OPTION1, OPTION2, OPTION3, OPTION4, OPTION5, OPTION6, OPTION7, OPTION8, OPTION9, OPTION10, OPTION11, OPTION12, OPTION13, OPTION14, OPTION15, OPTION16, OPTION17, OPTION18, OPTION19, OPTION20, REGION_ID, RPT_TYPE_DESC) VALUES (datarecord.CB_RPT_ID, datarecord.CB_ID, datarecord.CB_REGION_ID, datarecord.WHEN_PULLED, datarecord.PARSED, datarecord.RAW_DATA, datarecord.JOINT, datarecord.RPTTYPE, datarecord.OPTION1, datarecord.OPTION2, datarecord.OPTION3, datarecord.OPTION4, datarecord.OPTION5, datarecord.OPTION6, datarecord.OPTION7, datarecord.OPTION8, datarecord.OPTION9, datarecord.OPTION10, datarecord.OPTION11, datarecord.OPTION12, datarecord.OPTION13, datarecord.OPTION14, datarecord.OPTION15, datarecord.OPTION16, datarecord.OPTION17, datarecord.OPTION18, datarecord.OPTION19, datarecord.OPTION20, datarecord.REGION_ID, datarecord.RPT_TYPE_DESC);
     END LOOP;
END;
The copy works fine if I remove the long column from the CREATE TABLE "Tmp_CB_REPORT" statement
and the cursor copy statement. Any help is appreciated.

What I think you should do is to turn your long into a LOB. LOBs are much malleable than LONGs. I suggest you have a look at the documentation for DBMS_LOB. You can create a function using DBMS_LOB that uses a temporary CLOB to reas your long column an dreturn a CLOB.
Cheers, APC

How to copy file to another server from database using FTP in oracle

How to copy file to another server from database using FTP in oracle.
Please do the needfaul.

Billy Verreynne wrote:
BluShadow wrote:
Not to mention that some FTP servers can return more than one return message per operation whereas others may return one message for the same operation.I had the problem using the LIST command to determine if a file exists on the server. Cannot be determined via the FTP server's return code. Which means parsing and checking the text response from the server to the command. And this vary from server to server.
But the basics were quite easy to code. The entire package is 500 lines, includes comments and blank lines for formatting, and supports the basic FTP client command set. Not really a complex piece of software to write - but I found that many developers seem to think that writing network socket software is complex. Not really the case...Mine's a big larger, but incorporates functionality similar to what Chris provided in his, such as being able to use SQL to query a remote file using pipelined functions, or functionality to write the results of a query directly to a remove file.
:)

How to copy images from another MC in reversed order??

Hi everyone,
I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
This all works fine (very proud of it ).
Now my question:
To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
Not a big one, unless you want to create MANY of those SWF's...
Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
extra info: the MC_2 is already in the lib(empty) and placed on the stage.
something like:
var pointer:Number=1;
for (var:i:Number=50;i>=0;i--) {
get MC_1.picure(var);
put it in MC_2.frame(pointer);
pointer = pointer + 1;
All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
T.I.A.
Melluw

I tried your advice (thanks for that)
The event I already have is the mouse leave
I //-d out the part I removed (what did work)
The code I ended up with is:
function Start() {
stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
function cursorHide(evt:Event):void {
var currFrame = MC_1.currentFrame;
if (CCW == true) { //it is true in this case
movStart = (50 - currFrame);
else {
movStart = currFrame;
if (movStart>25) {
MC_1.prevFrame();
// removed swapChildren(MC_1, MC_2); // This is the part I removed
// removed MC_2.gotoAndPlay(movStart);
else {
MC_1.gotoAndPlay (movStart);
And if I leave the stage on the part where movStart is indeed >25
Nothing happens,
So I guess this is not what you meant
Subject: Action Script 3 how to copy images from another MC in reversed order??
I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content. So basically, there is nothing practical in taking that approach.
I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file. You probably just need to rethink your control scheme. You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
>

How to use SO_OBJECT_SEND function module

Hi friends,
how to use SO_OBJECT_SEND function module in 4.0B Server .

hi
good
check this code
REPORT ZTSAPMAIL.
DATA: X_OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: BEGIN OF X_OBJECT_HD_CHANGE.
INCLUDE STRUCTURE SOOD1.
DATA: END OF X_OBJECT_HD_CHANGE.
DATA: BEGIN OF X_OBJCONT OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJCONT.
DATA: BEGIN OF X_OBJHEAD OCCURS 0.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJHEAD.
DATA: BEGIN OF RAW_HEAD.
INCLUDE STRUCTURE SORH.
DATA: END OF RAW_HEAD.
DATA: BEGIN OF X_RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF X_RECEIVERS.
PARAMETERS: RECEIVER LIKE X_RECEIVERS-RECNAM. " Name
*BUILD MESSAGE HEADER
MOVE 'Sort field goes here' TO X_OBJECT_HD_CHANGE-OBJSRT. " Sort field
MOVE 'Name of the object goes here' TO X_OBJECT_HD_CHANGE-OBJNAM. " Name
MOVE 'Document title goes here' TO X_OBJECT_HD_CHANGE-OBJDES. " Title
MOVE 'F' TO X_OBJECT_HD_CHANGE-OBJSNS. " Functional OBJECT
MOVE 'E' TO X_OBJECT_HD_CHANGE-OBJLA. " Language
Object type of the new document
MOVE 'RAW' TO X_OBJECT_TYPE.
CLEAR X_OBJCONT.
MOVE 'Contents of mail' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
CLEAR X_OBJCONT-LINE. APPEND X_OBJCONT.
MOVE 'More contents' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
MOVE 'Still more contents'
to x_objcont-line.
APPEND X_OBJCONT.
MOVE ' ' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
Specific header (Dependent on the object type, here RAW)
REFRESH X_OBJHEAD.
DESCRIBE TABLE X_OBJCONT LINES RAW_HEAD-RAWSIZ.
MOVE RAW_HEAD TO X_OBJHEAD.
APPEND X_OBJHEAD.
*RECEIVERS table
CLEAR X_RECEIVERS.
REFRESH X_RECEIVERS.
MOVE RECEIVER TO X_RECEIVERS-RECNAM. " Name
MOVE 'B' TO X_RECEIVERS-RECESC. " Receiver type
MOVE 'X' TO X_RECEIVERS-SNDCP. " Send as a copy
MOVE 'X' TO X_RECEIVERS-SNDEX. " EXPRESS DOCUMENT
APPEND X_RECEIVERS.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = 'OUTBOX'
forwarder = x_forwarder
object_fl_change = x_object_fl_change
OBJECT_HD_CHANGE = X_OBJECT_HD_CHANGE
object_id = x_object_id
OBJECT_TYPE = X_OBJECT_TYPE
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
store_flag = x_store_flag
importing
object_id_new = x_object_id_new
sent_to_all = x_sent_to_all "May need to use
TABLES
OBJCONT = X_OBJCONT
OBJHEAD = X_OBJHEAD
objpara = x_objpara
objparb = x_objparb
RECEIVERS = X_RECEIVERS.
reward point if hlepful.
thanks
mrutyun^

How to copy exitsitng extracter into another new extracter?

Hello,
Please some one can tel me how to copy the existing extracter into another new extracter.
I have requirment as below
Currect me if i am wrong ,need to enhance the existing extracter and add some new fields,and need to include some masterdata filds also to it.
For master data i am going to do write routines at Transfermation so that no need to include in my exter for those filds to extracter.
Please some one guide me in this scenario.
Chrs

Hi,
you do not have to copy the extractor, you can enhance it with fields and fill them via enhancement coding --> rsa6.
If you want to copy it, you need to check what kind of extractor you have. Is it a function module or just a table extractor.
for fm: copy the function module via se37 and copy the extract structure via se11. Add your enhancements in the copied structures and coding. Create a new datasource with rso2.
for table extractor: create a view adding the additionally needed fields. create a new ds with rso2. Surely you need to add some coding in the relevant enhancement.
regards
Siggi

How to copy and paste text / url's from web pages

Hi,
Anyone know how to copy text and / or a url from a web page to another application?
Earlier I tried to copy a streaming url from a web page into media player internet radio but couldn't
Thanks
Paul
ps can we have a suggested improvements page where we can bullet point changes as at the moment the n900 is very basic in functionality.

after swiping, an arrow icon on the left side of the screen will show up, you have to tap on the arrow icon once to make a red sign appear over it, then you can select text
Az. At.
IT Support Engineer
DED

How to copy a function PRPRI

Similar Messages

Maybe you are looking for