How to count interrupts of a specific driver / HW

I am using Perfmon to get #interrupts/sec.
I can also drill down to single core resolution (e.g. core0, 1, 2, 3 in a 4 core CPU)
This is good, but i would like to get interrupts/sec for a specific source (e.g. network interface card) or all interrupts handled by a specific driver.
Couldn't find this capability in Perfmon.
does anyone have an idea?
Thanks,
Ami

No version of Reader offers word counting or word auditing.

Similar Messages

I have scanned a document, how do I save to a specific folder on an external drive from the Preview application?

I have scanned a document, how do I save to a specific folder on an external drive from the Preview application?

There is no 'Save as' in Lion. If it's a new document then select File -> Save will bring up a standard 'Save' dialog box which will allow you to specify the location. Otherwise select File -> Duplicate and then save the duplicate.

How to get Activity Monitor to show processes running on one specific drive

I clone my main drive to two cloned drives. From the clones I normally, without any problem, run both Repair Disk from the Apple Disk Utility, and a maintenance program from Disk Warrior. Now, however, neither of these utility programs are able to unmount my main drive. Rather, they return a message to quite running processes. I have tried to use Activity Monitor to locate what is running, but can find no way to determine which of the dozens of processes listed are connected to the main drive, rather than to the boot drive of the clone. Plus, I do not understand how something can be "running" on a drive that is not the boot drive. Please help. Thanks.

Let's start in reverse order...
I do not understand how something can be "running" on a drive that is not the boot drive
That's easy. You can't unmount the drive if any files on that drive are in use. That does not necessarily mean the application is stored on that drive, but any file on that drive could prevent it being unmounted - for example, if an application has a document open that is on the drive, you might not be able to unmount the drive.
Even subtler, if you're running Terminal.app and have cd'd into a directory on that drive, then you won't be able to unmount, either, since the directory is 'in use'.
As for finding out which applications are using the disk, try lsof in terminal:
sudo lsof +d /Volumes/diskname
This will show any process that has an open file handle on /Volumes/diskname (and its subdirectories).

How to count number of autoextents that had took place between a period.

urgent question
Hi all
how to provide me a report for getting the result of the Disk Drive Space usage (drive letter) that shows how quickly the space is being used up by the database(dbf files).
Or how to count the number of autoextents that had took place between a certain period of time.
either by cmd promt or OEM would be fine
Oracle database 10g(single instance)
OS:Windows 2003 server
thanks
Anto

hi justin and Pavan
First Thanks for your immediate responce,
Secoundly client has asked for the growth report at the OS level and not at the database level. but the growth is with respect to the autoextent feature that oracle has over the datafiles.
I was thinking that i could get a view or some history log to get this data retrieved from the past may be of a months data.I normally manually check the data base growth with the following script
SELECT total_space,free_space,
(NVL(total_space,2)-NVL(free_space,2) ) used_space
FROM (select round(SUM(Bytes/1024/1024/1024),2) Total_space
from DBA_data_files
(select round(SUM(Bytes/1024/1024/1024),2) free_space
from DBA_free_space
but this is Oracle DB level.
Any ideas for the report.like a query or somewhere in OEM
Thanks
Anto

Are there any tools from NI can generate the pass-through layer (IVI class driver) for IVI class specific driver?

IVI class driver (layer) will provide interchangeable feature for a IVI class specific driver. It would work as a pass-through layer and finally make calls to the IVI class specific driver. Since there could be a lot of functions to be passed through. Are there any tools from NI (Labwindows/CVI or Labview) can do this ?
Thanks a lot.
BTW: the IVI class specific driver interface is generated from Labwindows/CVI tools.

Hi Chris,
Yes, I did. To support interchangability, from my understanding of the IVI specs, there should be another layer IVI-C class driver on top of this IVI class specific driver. As in the IVI‑3.1: Driver Architecture Specification:
Although IVI‑C class drivers export inherent,
base, and extension capabilities, they do not actually implement them. Except
for a few inherent functions and attributes defined exclusively for class
drivers, class driver functions and attributes provide a pass‑through layer to
the IVI‑C specific driver. An IVI‑C specific driver is responsible for
implementing the operations of functions and attributes and for communicating
with the instrument. The IVI‑C specific instrument driver contains the
information for controlling the instrument, including the command strings,
parsing code, and valid ranges of each instrument setting"
So where is this IVI-C class driver and how is it created and communicate with my class specific driver?
Thanks a lot.
Cheers,
IVI‑3.1: Driver Architecture Specification

How to printing oracle report by specific printer name on solaris?

When running reports
-http://host/reports/rwservlet?destype=PRINTER&desname=printername&desformat=dflt.prt&report=test.rdf&userid=test/test@TEST&MODE=CHARACTER
report with destype=printer desname=printername, the report fails with REP-50159 Executed successfully but there were some errors when distribute the output
if set default printer by add PRINTER=printername export PRINTER; in uiprint.txt
it can print to printer.
i found document id 394554.1 in metalink but it can't fix problem.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:342229662272785964::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,394554.1,1,1,1,helvetica
To fix the problem, execute the following steps:
1. Take a backup of opmn.xml
2. Edit opmn.xml and include the path information of the new printer:
For In-process report server add the path information within <OC4J_BI_Forms>
Eg:
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH"
value="D:\Oracle\product\FRHome_1\lib32:D:\Oracle\product\FRHome_1\lib"/>
<variable id="PATH" value="//printserver;D:/Oracle/product/FRHome_1/bin;................./>
</environment>
Here //printserver is the network drive where is printer is installed.
For standalone report server add the path information within <reportservername>
Eg:
<ias-component id="standalonerepsvr01" status="enabled" id-matching="false">
<process-type id="ReportsServer" module-id="ReportsServices">
<process-set id="standalonerepsvr01" restart-on-death="true" numprocs="1">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH"
value="D:\Oracle\product\FRHome_1\lib32:D:\Oracle\product\FRHome_1\lib"/>
<variable id="PATH" value="//printserver;D:/Oracle/product/FRHome_1/bin;........../>
</environment>
3. Reload opmn : opmnctl reload
4. Restart opmn: opmnctl stopall , opmnctl startall
5. Run the report with destype=printer and desname=newprintername
my config (solaris)
oracle application server release 2 (10.1.2.0.2)
i used axis printserver name is SZ_R02.
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH_64" value="/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparcv9"/>
<variable id="LD_LIBRARY_PATH" value="/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparc"/>
<variable id="PATH" value="/SZ_R02:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib32:/data/app/mid/lib32:/data/app/mid/lib:/data/app/mid/network/lib::/data/app/mid/jdk/jre/lib/sparc"/>
</environment>
how to print to printer by specific printer name?
thank you very much
khun

if submit url with parameter
http://hostname:7778/reports/rwservlet?destype=PRINTER&desname=lpSZ_R02_2&report=sticker.out
error
REP-50159: Executed successfully but there were some errors when distribute the output
How to Solution?

IviSwtch Compliance Test IVI Specific Driver in CVI crashing

I have problem with IviSwtch Specific driver. I have finished all code for this driver and try to test in CVI tool called "Test IVI Specific Driver". Structure and Function panel test runs without any error. Problem is with Compliance test which returns:
the driver could not be initialized through the class driver.
Compliance Test was halted.
Error returned: bffa0011
Error Message: Function or method not supported.
I tried to add exports to dll in according to this solution http://digital.ni.com/public.nsf/allkb/1DCA138862E75119862576C5006EA144
After doing this Compliance test just crashing and I have to close it down.
Does anybody met this kind of problem? I would be grateful for any help.
Regards
Tomasz
Solved!
Go to Solution.

>>The DLL version format is valid.
ERROR: The DLL version is inconsistent with the version in the header file.
All attributes have correct names.
All attributes have correct data types.
This error means the revision of the generated <driver_prefix>.dll does not match the Major and Minor version defined in header. This should not be a conern if you will not release the driver to customers and you take care of revision.
>>ERROR: The driver is not c>ompliant with the Inherent group because:
-The following Inherent attributes are not implemented:
INSTRUMENT_MANUFACTURER
INSTRUMENT_MODEL
It is hard to tell the root reason of this issue, but there might be something doesn't work in your code. How about post these attributions' definition? OR send your project to [email protected] I think NI could help to take a look into it.
Thanks,
Charles

How to extend the windows 2003 C drive

How to extend the windows 2003 C drive ..? one of my DC is running out of space.
Please advice
Krishna

If you make a BartPE bootable ISO or CD, you can add a 'DiskPart' folder in your Plugins folder. Then put the following contents inside that 'DiskPart' folder. The file name should be "DiskPart.inf"
This will allow you to boot from the BartPE CD, open a command prompt, and use Diskpart like you would from within Windows normally. We extended C drives of old systems (VMs) many times this way. I'm reasonably sure our BartPE CD is based
of Server 2003 Standard SP2.
[Version]
Signature= "$Windows NT$"
[PEBuilder]
Name="Diskpart functionality in Win2k3 - SP1 only"
; Assisted with this understanding was:
; http://support.microsoft.com/?kbid=910380
; http://technet2.microsoft.com/WindowsServer/en/Library/89c3a36a-d3e2-4462-8893-7a384b118c6b1033.mspx
; http://windowssdk.msdn.microsoft.com/library/default.asp?url=/library/en-us/vds/base/vds_interfaces.asp
Enable=1
[SourceDisksFiles]
Ftdisk.sys=4
Partmgr.sys=4
Volsnap.sys=4
Swprv.dll=2
Eventcls.dll=2
Vssadmin.exe=2
Vssapi.dll=2
Vssui.dll=2
Vssvc.exe=2
Vss_ps.dll=2
Diskpart.exe=2
[Default.AddReg]
; Runs dependent DLL registration for Application usage
; 0x1= REG_SZ
; 0x2= REG_EXPAND_SZ
; 0x1, "Software\Microsoft\Windows\CurrentVersion\Run", "DiskPartSupport", "%systemroot%\system32\regsvr32.exe /s %systemroot%\system32\vss_ps.dll"
; removed because the reg key is not read unless you use explorer as a shell.
[SetupReg.AddReg.3790]
; Win2k3 SP1 Only: RpcSS needs to lanuch DComLaunch Service first.
0x7, "ControlSet001\Services\RpcSs","DependOnService","DcomLaunch"
; New DComLaunch Service in Win2k3 SP1
0x1,"ControlSet001\Services\DcomLaunch","Description","DCOM Services"
0x1,"ControlSet001\Services\DcomLaunch","DisplayName","DCOM Services"
0x4,"ControlSet001\Services\DcomLaunch","ErrorControl",0x1
0x1,"ControlSet001\Services\DcomLaunch","Group","Event Log"
0x2,"ControlSet001\Services\DcomLaunch","ImagePath","svchost -k DcomLaunch"
0x1,"ControlSet001\Services\DcomLaunch","ObjectName","LocalSystem"
0x4,"ControlSet001\Services\DcomLaunch","Start",0x2
0x4,"ControlSet001\Services\DcomLaunch","Type",0x20
0x3,"ControlSet001\Services\DcomLaunch","FailureActions",\
00,00,00,00,00,00,00,00,00,00,00,00,01,00,00,00,00,00,00,00,02,00,00,00,60,\
ea,00,00
0x1,"ControlSet001\Services\DcomLaunch\Enum","0","Root\LEGACY_DCOMLAUNCH\0000"
0x4,"ControlSet001\Services\DcomLaunch\Enum","Count",0x1
0x4,"ControlSet001\Services\DcomLaunch\Enum","NextInstance",0x1
0x2,"ControlSet001\Services\DcomLaunch\Parameters","ServiceDll","rpcss.dll"
0x3,"ControlSet001\Services\DcomLaunch\Security","Security",\
01,00,14,80,b4,00,00,00,c0,00,00,00,14,00,00,00,34,00,00,00,02,00,20,00,01,\
00,00,00,02,80,18,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,00,00,20,02,\
00,00,02,00,80,00,05,00,00,00,00,03,18,00,8d,00,02,00,01,01,00,00,00,00,00,\
01,00,00,00,00,00,00,00,00,00,03,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,\
20,00,00,00,20,02,00,00,00,03,18,00,8f,00,02,00,01,02,00,00,00,00,00,05,20,\
00,00,00,23,02,00,00,00,03,18,00,9d,00,00,00,01,01,00,00,00,00,00,05,04,00,\
00,00,23,02,00,00,00,03,18,00,9d,00,00,00,01,02,00,00,00,00,00,05,20,00,00,\
00,21,02,00,00,01,01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,\
12,00,00,00
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","Service","DcomLaunch"
0x4,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","Legacy",0x1
0x4,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","ConfigFlags",0x0
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","Class","LegacyDriver"
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","ClassGUID","{8ECC055D-047F-11D1-A537-0000F8753ED1}"
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000","DeviceDesc","DCOM Services."
0x1,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH\0000\Control","ActiveService","DcomLaunch"
0x4,"ControlSet001\Enum\Root\LEGACY_DCOMLAUNCH","NextInstance",0x1
[Software.AddReg]
0x1,"Classes\CLSID\{E0393303-90D4-4A97-AB71-E9B671EE2729}",,"VDS ProxyStub"
0x2,"Classes\CLSID\{E0393303-90D4-4A97-AB71-E9B671EE2729}\InprocServer32",,"%SystemRoot%\System32\vds_ps.dll"
0x1,"Classes\CLSID\{E0393303-90D4-4A97-AB71-E9B671EE2729}\InprocServer32","ThreadingModel","Both"
0x1,"Classes\CLSID\{F2C2787D-95AB-40D4-942D-298F5F757874}",,"PSFactoryBuffer"
0x2,"Classes\CLSID\{F2C2787D-95AB-40D4-942D-298F5F757874}\InprocServer32",,"%SystemRoot%\System32\vds_ps.dll"
0x1,"Classes\CLSID\{F2C2787D-95AB-40D4-942D-298F5F757874}\InprocServer32","ThreadingModel","Both"
0x1,"Classes\Interface\{88306BB2-E71F-478C-86A2-79DA200A0F11}",,"IVdsVolume"
0x1,"Classes\Interface\{88306BB2-E71F-478C-86A2-79DA200A0F11}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{9882F547-CFC3-420B-9750-00DFBEC50662}",,"IVdsCreatePartitionEx"
0x1,"Classes\Interface\{9882F547-CFC3-420B-9750-00DFBEC50662}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{98F17BF3-9F33-4F12-8714-8B4075092C2E}",,"IVdsHwProviderPrivate"
0x1,"Classes\Interface\{98F17BF3-9F33-4F12-8714-8B4075092C2E}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{9AA58360-CE33-4F92-B658-ED24B14425B8}",,"IVdsSwProvider"
0x1,"Classes\Interface\{9AA58360-CE33-4F92-B658-ED24B14425B8}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{CB53D96E-DFFB-474A-A078-790D1E2BC082}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{D188E97D-85AA-4D33-ABC6-26299A10FFC1}",,"IVdsAdmin"
0x1,"Classes\Interface\{D188E97D-85AA-4D33-ABC6-26299A10FFC1}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{D5D23B6D-5A55-4492-9889-397A3C2D2DBC}",,"IVdsAsync"
0x1,"Classes\Interface\{D5D23B6D-5A55-4492-9889-397A3C2D2DBC}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{D99BDAAE-B13A-4178-9FDB-E27F16B4603E}",,"IVdsHwProvider"
0x1,"Classes\Interface\{D99BDAAE-B13A-4178-9FDB-E27F16B4603E}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{DAEBEEF3-8523-47ED-A2B9-05CECCE2A1AE}",,"IVdsMaintenance"
0x1,"Classes\Interface\{DAEBEEF3-8523-47ED-A2B9-05CECCE2A1AE}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{E0393303-90D4-4A97-AB71-E9B671EE2729}",,"IVdsServiceLoader"
0x1,"Classes\Interface\{E0393303-90D4-4A97-AB71-E9B671EE2729}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{9882F547-CFC3-420B-9750-00DFBEC50662}",,"IVdsCreatePartitionEx"
0x1,"Classes\Interface\{9882F547-CFC3-420B-9750-00DFBEC50662}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{E0393303-90D4-4A97-AB71-E9B671EE2729}",,"IVdsServiceLoader"
0x1,"Classes\Interface\{E0393303-90D4-4A97-AB71-E9B671EE2729}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{0EE1A790-5D2E-4ABB-8C99-C481E8BE2138}",,"IVdsLunPlex"
0x1,"Classes\Interface\{0EE1A790-5D2E-4ABB-8C99-C481E8BE2138}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{0EE1A790-5D2E-4ABB-8C99-C481E8BE2138}",,"IVdsLunPlex"
0x1,"Classes\Interface\{0EE1A790-5D2E-4ABB-8C99-C481E8BE2138}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{0818A8EF-9BA9-40D8-A6F9-E22833CC771E}",,"IVdsService"
0x1,"Classes\Interface\{0818A8EF-9BA9-40D8-A6F9-E22833CC771E}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{07E5C822-F00C-47A1-8FCE-B244DA56FD06}",,"IVdsDisk"
0x1,"Classes\Interface\{07E5C822-F00C-47A1-8FCE-B244DA56FD06}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{0316560B-5DB4-4ED9-BBB5-213436DDC0D9}",,"IVdsRemovable"
0x1,"Classes\Interface\{0316560B-5DB4-4ED9-BBB5-213436DDC0D9}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{3540A9C7-E60F-4111-A840-8BBA6C2C83D8}",,"IVdsLun"
0x1,"Classes\Interface\{3540A9C7-E60F-4111-A840-8BBA6C2C83D8}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{33B87426-5C06-49F4-84BD-F486B1B4A21D}",,"IVdsMigrateDisks"
0x1,"Classes\Interface\{33B87426-5C06-49F4-84BD-F486B1B4A21D}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{11F3CD41-B7E8-48FF-9472-9DFF018AA292}",,"IVdsProviderPrivate"
0x1,"Classes\Interface\{11F3CD41-B7E8-48FF-9472-9DFF018AA292}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{118610B7-8D94-4030-B5B8-500889788E4E}",,"IEnumVdsObject"
0x1,"Classes\Interface\{118610B7-8D94-4030-B5B8-500889788E4E}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{10C5E575-7984-4E81-A56B-431F5F92AE42}",,"IVdsProvider"
0x1,"Classes\Interface\{10C5E575-7984-4E81-A56B-431F5F92AE42}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{E882C452-CF37-482A-BBFF-E6EE614E8023}",,"IVdsSwProviderPrivate"
0x1,"Classes\Interface\{E882C452-CF37-482A-BBFF-E6EE614E8023}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{EE2D5DED-6236-4169-931D-B9778CE03DC6}",,"IVdsVolumeMF"
0x1,"Classes\Interface\{EE2D5DED-6236-4169-931D-B9778CE03DC6}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{FF24EFA4-AADE-4B6B-898B-EAA6A20887C7}",,"IVdsDrive"
0x1,"Classes\Interface\{FF24EFA4-AADE-4B6B-898B-EAA6A20887C7}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{3B69D7F5-9D94-4648-91CA-79939BA263BF}",,"IVdsPack"
0x1,"Classes\Interface\{3B69D7F5-9D94-4648-91CA-79939BA263BF}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{4AFC3636-DB01-4052-80C3-03BBCB8D3C69}",,"IVdsServiceInitialization"
0x1,"Classes\Interface\{4AFC3636-DB01-4052-80C3-03BBCB8D3C69}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{4DAA0135-E1D1-40F1-AAA5-3CC1E53221C3}",,"IVdsVolumePlex"
0x1,"Classes\Interface\{4DAA0135-E1D1-40F1-AAA5-3CC1E53221C3}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{54D1F9E3-7FD3-421A-AF9C-53C2D8EE5BCF}",,"IVdsOwnershipChangeQuery"
0x1,"Classes\Interface\{54D1F9E3-7FD3-421A-AF9C-53C2D8EE5BCF}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{6E6F6B40-977C-4069-BDDD-AC710059F8C0}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{6FCEE2D3-6D90-4F91-80E2-A5C7CAACA9D8}",,"IVdsSubSystem"
0x1,"Classes\Interface\{6FCEE2D3-6D90-4F91-80E2-A5C7CAACA9D8}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
0x1,"Classes\Interface\{8326CD1D-CF59-4936-B786-5EFC08798E25}",,"IVdsAdviseSink"
0x1,"Classes\Interface\{8326CD1D-CF59-4936-B786-5EFC08798E25}\ProxyStubClsid32",,"{E0393303-90D4-4A97-AB71-E9B671EE2729}"
Brian / ChevyNovaLN

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device. I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail. Thanks for your help.

Not a feature of iOS. Check the AppStore to see if there are other
mail apps that allow passcode protection.
Or use Safari to log onto your email via a web-based interface and
enter your credentials each time. A bit slower, but the kids will
not know the details to login.

How do i install reader to a drive other than the boot drive?

how do i install reader to a drive other than the boot drive?

Hi nicksdaddy,
There is an offline version:
http://get.adobe.com/reader/enterprise/
Hope that helps!
Stacy

How do I download iTunes to a drive other than C?

I have 2 hard drives in my computer, the C drive and a F drive. iTunes uses so much space that I ran out of room on my C drive, but have lots of room on my F drive. I have completely uninstalled iTunes and would like to reinstall it on my F drive. Does anybody know how I can do this? The C drive seems to be the default drive and I can't figure out how to tell program to install on the F drive instead. Please help!

Thanks so much! Maybe you can tell me one more thing...I DID uninstall already, so how do I install into the F drive? Or do I need to install into the C drive then follow the directions you provided?
Again, thank you so much for your help!!

How to install ovi suite to a drive other than C:?...

how to install ovi suite to a drive other than c:??? my c: drive is almost full with other partitions perfectly free to install it, how do i do that? can i use previous versions of ovi suite to use with my e63? at this point, i'm unable to use ovi suite at all, because there's no room to install it on my c: drive.
allllllllso there's one more thing, when i originally had tried installing ovi suite on my computer i had more than 1gb free. after installing it i on'ly had 500mb free. i had only intended for it to use a very small amount of space, and since i also use my c: drive for virtual memory i quickly uninstalled it, looking for an option i'd maybe skipped over while installing it the first time. no luck. anyways, when i looked in the add/remove programs control panel the installed size of ovi suite was only 40-50mb. even after uninstalling ovi suite the extra memory space that seemed to all of a sudden taken up by the installation stayed used.
when looking at the file sizes of everything on my hard drive, (including system files and paging file) there is still a descreprency between the amount of memory used and the size of all files total on the drive. at this point im quite disgusted and disapointed in ovi suite as i'm mostly unable to use it to connect my phone to my computer and i'm also having problems with the CA101 cable as well. i guess i'll have to go check for another cable.
nokia!!! wake up and fix yo **bleep**!!!!
anyone have any solutions for the main problem? (installing to a drive other than c? is there support for this option in any of the new beta versions? can that be included in the newest betas? i'm suuuuuure i'm not the only one begging for this option!!!

Hi ostrenga4, sorry to hear about your experiences.
When installing Nokia Ovi Suite to PC, Windows makes "system restoration points", which are available to restore operating system to previous condition, if something goes wrong, for example in driver installation.
You can change install location of Nokia Ovi Suite with following:
- Download Nokia Ovi Suite install package from Nokia Ovi Suite pages
- Start Windows Command prompt
- From Command prompt, navigate to folder containing Nokia Ovi Suite install package, which you downloaded
- Start Nokia Ovi Suite install package with command line "Nokia_Ovi_Suite_webinstaller.exe /TARGET="D:\TestDir\Test"
- This results, that Nokia Ovi Suite installer creates folder D:\TestDir\Test (if that doesn't exist) and installs Nokia Ovi Suite there.
- Unfortunately, Windows Installer still keeps installer cache files and system restoration points in C: drive (or whatever your system drive is)
As you can see, this is possible, but it is very much recommend to have enough space for installing software into system drive.
Cheers, Samuli

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive?

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

How do i use an external hard drive for all my itunes music?

how do i use an external hard drive for all my itunes music?

Hi valleydave,
Here are two good links for you to check out:
http://support.apple.com/kb/ht1751
http://support.apple.com/kb/ht1449
The first one goes over, in-depth, what you're looking for in regards to "off site" iTunes.

How to count interrupts of a specific driver / HW

Similar Messages

Maybe you are looking for