How to creat an internal datasource

Hi experts,
I'm trying to creat a internal datasource to pick up data from the USR02 table to a n infocube (tcode rsds).
Text error : "Creation of DataSources for SAP source system FBWCLNT010 is not permitted"
Help : "You cannot directly create DataSources for replicating source systems in BI.
The system terminates the process."
Can you help me please ?
Best Regards,
Pierre.

I GUESS THIS IS NOT THE RIGHT FORUM TO ASK THIS QUESTION.
You can post your Questuion in BI/BW forum

Similar Messages

How to create an Internal Customer for Ineterplant stock Transfer

Daer Gurus,
Please tell me how to create an Internal Customer for Interplant stock transfer.
Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
How to maintain the Two plants as supplier and third one as a receiver plant.
which account group I should use and what details I have to use for it ? Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
thanks in advance
regards,
Sanjay

Hi,
Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
Your STO will have following 4 flows.
1. AAAA - CCCC
2. AAAA - BBBB
3. BBBB- CCCC
4. BBBB- AAAA
you need to do the following settings...
1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
(Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
Following is the example settings required for our scenario 1.
AAAA will be a supplying plant and CCCC will be rec. plant.... for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
Hope this will be useful to you.
Thanks,
Muthu

How to create Dynamic internal table with columns also created dynamically.

Hi All,
Any info on how to create a dynamic internal table along with columns(fields) also to be created dynamically.
My requirement is ..On the selection screen I enter the number of fields to be in the internal table which gets created dynamically.
I had gone thru some posts on dynamic table creation,but could'nt find any on the dynamic field creation.
Any suggestions pls?
Thanks
Nara

I don't understand ...
something like that ?
*   Form P_MODIFY_HEADER.                                              *
form p_modify_header.
data : is_fieldcatalog type lvc_s_fcat ,
         v_count(2)      type n ,
         v_date          type d ,
         v_buff(30).
* Update the fieldcatalog.
loop at it_fieldcatalog into is_fieldcatalog.
    check is_fieldcatalog-fieldname+0(3) eq 'ABS' or
          is_fieldcatalog-fieldname+0(3) eq 'VAL' .
    move : is_fieldcatalog-fieldname+3(2) to v_count ,
           p_perb2+5(2)                   to v_date+4(2) ,
           p_perb2+0(4)                   to v_date+0(4) ,
           '01'                           to v_date+6(2) .
    v_count = v_count - 1.
    call function 'RE_ADD_MONTH_TO_DATE'
        exporting
          months        = v_count
          olddate       = v_date
        importing
          newdate       = v_date.
    if is_fieldcatalog-fieldname+0(3) eq 'ABS'.
      concatenate 'Quantité 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    else.
      concatenate 'Montant 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    endif.
    move : v_buff to is_fieldcatalog-scrtext_s ,
           v_buff to is_fieldcatalog-scrtext_m ,
           v_buff to is_fieldcatalog-scrtext_l ,
           v_buff to is_fieldcatalog-reptext .
    modify it_fieldcatalog from is_fieldcatalog.
endloop.
* Modify the fieldcatalog.
call method obj_grid->set_frontend_fieldcatalog
       exporting it_fieldcatalog = it_fieldcatalog.
* Refresh the display of the grid.
call method obj_grid->refresh_table_display.
endform.                     " P_MODIFY_HEADER

How to create a hierarchy datasource in R/3

Hello,
We use the 0MATERIAL_LKLS_HIER hierarchy datasource to load material hierachy in BW.
I had to modify the function module that creates the data for 0MATERIAL_LKLS_HIER.
Now, i need to create a new datasource based on the new function module.
To do so, i created a generic datasource (with SBIW), a master data attributes datasource.
I tried to put the same parameters that in 0MATERIAL_LKLS_HIER, but i didn't find how to indicate that it's a hierarchy and some other parameters (as you can see in RSA2 for 0MATERIAL_LKLS_HIER in the "semantic attributes" area).
Also, i couldn't run the new datasource in RSA3 because it didn't show me the right selection fields.
Could you tell me if there is a specific transaction to create hierarchy datasources ?
Thank you.
MGH

Hi,
May help you:----
Re: hierchy creation in ECC and replicate to BI
http://help.sap.com/saphelp_nw04/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/content.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7034028c-ad1d-2a10-2c94-868e7707dfe2
Regards,
Suman
Edited by: Suman Chakravarthy on Aug 6, 2011 3:12 PM
Edited by: Jason Lax on Dec 28, 2011 2:28 PM (Updated URL to correct format)

How 2 create dynamic internal table and can we pass it to gui_download FM

HI all,
     How can we create a dynamic internal table?
I have a requirement where i have to create an internal table with the no. of fields depending on the selection screen values, i think tat can be possible though dynamic creation only.
         How to solve this issue..?Pointers will be very much useful..
Thanks
Sunny.

hi
Follow the code it will help you out....
REPORT YUSMM_TEXT2                             .
*TABLES
TABLES: MARA,    " General Material Data
        MAKT,    " Material Descriptions
        T002.    " Language Keys
* GLOBAL TYPE-POOL
TYPE-POOLS : SLIS.
* GLOBAL TYPES
TYPES: BEGIN OF TP_LANG ,
         SPRAS LIKE T002-SPRAS,
         LAISO LIKE T002-LAISO,
         SRNO(3) TYPE N,
       END OF TP_LANG.
TYPES: BEGIN OF TP_MATNR,
         MATNR LIKE MARA-MATNR,
         BEGRU LIKE MARA-BEGRU,
       END OF TP_MATNR.
* DECLARATION FOR GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA:GT_MAKT    TYPE STANDARD TABLE OF MAKT, "Materialkurztexte,
     GT_THEAD   TYPE STANDARD TABLE OF THEAD, "SAPscript: Text-Header,
     GT_LINETAB TYPE STANDARD TABLE OF TLINE, "SAPscript: Text-Zeilen,
     GT_T002    TYPE STANDARD TABLE OF T002. "Language key
DATA: BEGIN OF GV_TEXT_OUTPUT_LINE,
            MATNR LIKE MARA-MATNR,
            BEGRU LIKE MARA-BEGRU,
            MAKTX LIKE MAKT-MAKTX,
            LTXT40(1250) TYPE C,
            SRNO(3) TYPE N,
            SPRAS LIKE T002-SPRAS,
         END OF GV_TEXT_OUTPUT_LINE.
DATA: GT_MATNR TYPE STANDARD TABLE OF TP_MATNR,
      WA_GT_MATNR TYPE TP_MATNR.
DATA: GT_LANG TYPE STANDARD TABLE OF TP_LANG,
      WA_GT_LANG TYPE TP_LANG.
DATA: GT_TEXT_OUTPUT_LINE LIKE STANDARD TABLE OF GV_TEXT_OUTPUT_LINE,
      GT_FIELDCAT         TYPE SLIS_T_FIELDCAT_ALV,
      GV_FIELDCAT         LIKE LINE OF GT_FIELDCAT,
      CT_GT_FIELDCAT_IN LIKE GV_FIELDCAT,
      GS_LAYOUT           TYPE SLIS_LAYOUT_ALV,
      GV_REPID            TYPE SY-REPID.
DATA: BEGIN OF GV,
        FORMER_ERROR       LIKE SY-MARKY,     " Fehlermeldung bereits
        FILE_OPEN(1),                          " Flag open file
        REC_LENGTH         TYPE I,            " record length
        MATNR              TYPE MARA-MATNR,   " material
        REPID              TYPE SYST-REPID,
        RETCO              TYPE SY-SUBRC,
      END OF GV.
DATA: GV_MAKT             TYPE MAKT,
      GV_T002             TYPE T002,
      GV_LANGU            TYPE THEAD-TDSPRAS.
* DECLARATION FOR FIELD-SYMBOLS
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
               <FS_DATA1> TYPE REF TO DATA,
               <FS_2>    TYPE STANDARD TABLE,
               <FS_22>   TYPE STANDARD TABLE,
               <FS_1>,
               <FS_11>,
               <F>,
               <FA>,
               <LWA_LINE_WA>,
               <LWA_LINE_WA1>.
DATA: IT_FLDCAT TYPE LVC_T_FCAT.
DATA: T_FLDCAT1   TYPE SLIS_T_FIELDCAT_ALV.
DATA: L_LT TYPE SLIS_LAYOUT_ALV.
DATA: WA_IT_FLDCAT TYPE LVC_S_FCAT.
DATA: WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: GP_TABLE TYPE REF TO DATA.
DATA: WA_NEWLINE TYPE REF TO DATA.
*DECLARATION FOR CONSTANTS
CONSTANTS:
   BEGIN OF GC,
     TDID_GRUN     TYPE THEAD-TDID     VALUE 'GRUN',
     TDOBJECT_MAT TYPE THEAD-TDOBJECT VALUE 'MATERIAL',
     ON(01)        TYPE C              VALUE 'X',
     YES(01)       TYPE C              VALUE 'X',
     TXT(25)       TYPE C              VALUE 'MATERIAL DETAILS',
     MAT(25)       TYPE C              VALUE 'MATERIAL NUMBER',
     AUT(25)       TYPE C              VALUE 'AUTHORIZATION GROUP',
     FOUND         TYPE SY-SUBRC       VALUE '00', " Return-Code
     RC_OK         TYPE SY-SUBRC       VALUE '00', " Return-Code
     OFF           TYPE SY-SUBRC       VALUE '00', " return code
     FALSE         TYPE SY-SUBRC       VALUE '00', " boolean
     TRUE          TYPE SY-SUBRC       VALUE '01', " boolean
END OF GC.
* DECLARATION FOR VARIABLES
DATA: V(3) TYPE N,
      STR TYPE STRING,
      STR1 TYPE STRING,
      V_VAR(3) TYPE N,
      V_VAR1(3) TYPE N,
      V_FIELDNAME(15) TYPE C,
      V_CHAR(15) TYPE C,
      V_LINES(3) TYPE N,
      MAKTEXT LIKE MAKT-MAKTX,
      LT_DATA        TYPE   REF TO DATA,
      LT_DATA1        TYPE   REF TO DATA,
      LWA_LINE       TYPE   REF TO DATA,
      LWA_LINE1 TYPE REF TO DATA.
*SELECTION-SCREEN AND PARAMETERS
SELECTION-SCREEN: BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
S_MATNR FOR MARA-MATNR, "MATERIAL NUMBER
S_MTART FOR MARA-MTART, "MATERIAL TEXT
S_LANG FOR MAKT-SPRAS.   "LANGUAGE
PARAMETER: GP_SIZE TYPE I DEFAULT 200. "DATA LENGTH
SELECTION-SCREEN: END OF BLOCK A1.
* AT SELECTION SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
    MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
    MESSAGE W130(26) WITH TEXT-004.
    SET CURSOR FIELD 'gp_size'.
ENDIF.
* INITIALIZATION
INITIALIZATION.
GV-REPID = SY-REPID.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM GET_MARA_DATA
            TABLES
              GT_TEXT_OUTPUT_LINE
            USING
              S_MATNR[]
              S_MTART[]
              GP_SIZE
            CHANGING
              GV-RETCO
PERFORM GET_MAT_TEXT
             TABLES
               GT_MAKT
               GT_TEXT_OUTPUT_LINE
               GT_THEAD
               GT_LINETAB
             USING
               GC
               GV-RETCO
             CHANGING
               GV_TEXT_OUTPUT_LINE
               GV_MAKT
PERFORM GET_LANG.
PERFORM DYNAMIC_TABLES.
PERFORM POPULATE_FINAL_TABLE.
PERFORM POPULATE_DYNAMIC_TABLE.
* END-OF-SELECTION
END-OF-SELECTION.
PERFORM DATA_OUTPUT.
*&      Form get_mara_data
*       Materialdaten lesen
*      <->ct_gt_text_output_line Ausgabetabelle
*      -->it_s_matnr Parameter Materialnummer
*      -->it_s_mtart Parameter Materialart
*      -->if_gp_size Parameter Anzahl Materialnummern
FORM GET_MARA_DATA TABLES   CT_GT_TEXT_OUTPUT_LINE STRUCTURE
                                   GV_TEXT_OUTPUT_LINE
                    USING    IT_S_MATNR LIKE S_MATNR[]
                             IT_S_MTART LIKE S_MTART[]
                             IF_GP_SIZE
                    CHANGING IF_GV-RETCO.                   "#EC *
* MARA in die Übergabestruktur einlesen
SELECT MATNR BEGRU
        FROM MARA UP TO IF_GP_SIZE ROWS
        APPENDING CORRESPONDING FIELDS OF TABLE GT_MATNR
                 WHERE MATNR IN IT_S_MATNR
                   AND MTART IN IT_S_MTART.
IF_GV-RETCO = SY-SUBRC.
ENDFORM.                    " get_mara_data
*&      Form get_mat_text
*       Kurz- und Langtexte zum Material lesen
*      <->ct_gt_makt              Materialkurztexte
*      <->ct_gt_text_output_line Ausgabetabelle
*      <->ct_gt_thead             Kopftabelle für ALV
*      <->ct_gt_linetab           Zeilentabelle für ALV
*      -->if_gc                   Globale Konstanten
*      <--cf_gv_text_output_line Struktur Ausgabetabelle
*      <--cf_gv_makt              Struktru Materialkurztexte
FORM GET_MAT_TEXT TABLES   CT_GT_MAKT             STRUCTURE MAKT
                            CT_GT_TEXT_OUTPUT_LINE STRUCTURE
                                                GV_TEXT_OUTPUT_LINE
                            CT_GT_THEAD            STRUCTURE THEAD
                            CT_GT_LINETAB          STRUCTURE TLINE
                   USING
                            IF_GC                  LIKE GC
                            IF_GV-RETCO
                   CHANGING CF_GV_TEXT_OUTPUT_LINE LIKE
                                                   GV_TEXT_OUTPUT_LINE
                            CF_GV_MAKT             LIKE GV_MAKT
DATA: STRG TYPE STRING,
        STRG1(1255) TYPE C.
IF IF_GV-RETCO = IF_GC-FOUND.
* Materialkurztexte in alles Sprachen einlesen
    SELECT * FROM MAKT APPENDING TABLE CT_GT_MAKT
             FOR ALL ENTRIES IN GT_MATNR "ct_gt_text_output_line
             WHERE MATNR = GT_MATNR-MATNR " ct_gt_text_output_line-matnr
* Kurztexte in die sprachabhängigen Felder bringen
    LOOP AT GT_MATNR INTO WA_GT_MATNR.
      LOOP AT CT_GT_MAKT INTO CF_GV_MAKT
             WHERE MATNR = WA_GT_MATNR-MATNR.
        CF_GV_TEXT_OUTPUT_LINE-MATNR = WA_GT_MATNR-MATNR.
        CF_GV_TEXT_OUTPUT_LINE-BEGRU = WA_GT_MATNR-BEGRU.
        CF_GV_TEXT_OUTPUT_LINE-MAKTX = CF_GV_MAKT-MAKTX.
        CF_GV_TEXT_OUTPUT_LINE-SPRAS = CF_GV_MAKT-SPRAS.
* LANGTEXT
        CLEAR CT_GT_THEAD[].
        CT_GT_THEAD-TDOBJECT = IF_GC-TDOBJECT_MAT.
        CT_GT_THEAD-TDNAME   = WA_GT_MATNR-MATNR.
        CT_GT_THEAD-TDID     = IF_GC-TDID_GRUN.
        CT_GT_THEAD-TDSPRAS = CF_GV_MAKT-SPRAS.
        CALL FUNCTION 'TEXT_READ'
          EXPORTING
            I_HEADER   = CT_GT_THEAD
            I_READONLY = IF_GC-ON
          IMPORTING
            E_HEADER   = CT_GT_THEAD
          TABLES
            T_LINES    = CT_GT_LINETAB[]
          EXCEPTIONS
            NOTFOUND   = 1.
        IF SY-SUBRC = IF_GC-FOUND.
          LOOP AT CT_GT_LINETAB.
            STRG = CT_GT_LINETAB-TDLINE.
            IF STRG1 <> ' '.
              CONCATENATE STRG1 ';' STRG INTO STRG1.
            ELSE.
              STRG1 = STRG.
            ENDIF.
          ENDLOOP.
          CF_GV_TEXT_OUTPUT_LINE-LTXT40 = STRG1.
          APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
          CLEAR CF_GV_TEXT_OUTPUT_LINE.
          STRG1 = ' '.
        ELSE.
          APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
        ENDIF.
      ENDLOOP.
    ENDLOOP.
ENDIF.
ENDFORM.                    " get_mat_text
*&      Form data_output
*       Daten mit ALV ausgeben
*      <->ct_GT_FIELDCAT          Feldkatalog für ALV
*      <->ct_gt_text_output_line Ausgabetabelle
*      -->P_GS_LAYOUT             Layout für ALV
*      -->if_gc                   Globale Konstanten
*      <--cf_GV_REPID             Zur Zeit aufgerufener Reportname
*      <--cf_gv_fieldcat          Struktur Feldkatalog
*      <--cf_gv                   Globale Variablen
FORM DATA_OUTPUT.
PERFORM FIELDCATBUILD.
PERFORM LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM       = GV-REPID
      I_CALLBACK_PF_STATUS_SET = 'EVENT_SET_STATUS_01'
      I_CALLBACK_USER_COMMAND = 'EVENT_USER_COMMAND'
      IS_LAYOUT                = L_LT
      IT_FIELDCAT              = T_FLDCAT1[]
    TABLES
      T_OUTTAB                 = <FS_2>
    EXCEPTIONS
      PROGRAM_ERROR            = 1
      OTHERS                   = 2.
IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " data_output
*&      Form fieldcatbuild
*       text
* --> p1        text
* <-- p2        text
FORM FIELDCATBUILD. " TABLES   ct_gt_fieldcat_in STRUCTURE gv_fieldcat.
LOOP AT IT_FLDCAT INTO WA_IT_FLDCAT.
    WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
    WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
    WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-FIELDNAME.
    APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
    CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ENDFORM.                    " fieldcatbuild
* Form event_set_status_01*
FORM EVENT_SET_STATUS_01 USING LT_EXCL TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ABCD' .
ENDFORM. "EVENT_SET_STATUS_01
*& Form Name: event_user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM EVENT_USER_COMMAND USING
IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
    WHEN 'DOWNLOAD'.
      PERFORM POPULATE_DOWNLOAD_TABLE.
      DATA: L_LENGHT TYPE I.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME              = 'C:data.xls'
          FILETYPE              = 'ASC'
          WRITE_FIELD_SEPARATOR = 'X'
          TRUNC_TRAILING_BLANKS = 'X'
          DAT_MODE              = 'X'
        IMPORTING
          FILELENGTH            = L_LENGHT
        TABLES
          DATA_TAB              = <FS_22>.
      IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF L_LENGHT NE GC-FOUND.
        MESSAGE S398(00) WITH 'DATA downloaded to c:data.xls'.
      ENDIF.
ENDCASE.
ENDFORM.                    "event_user_command
*&      Form get_lang
*       text
* --> p1        text
* <-- p2        text
FORM GET_LANG.
SELECT SPRAS
           LAISO FROM T002 INTO CORRESPONDING FIELDS OF TABLE GT_LANG
                  WHERE SPRAS IN S_LANG.
DESCRIBE TABLE GT_LANG LINES V_LINES.
LOOP AT GT_LANG INTO WA_GT_LANG.
    V = V + 1.
    WA_GT_LANG-SRNO = V.
    MODIFY GT_LANG FROM WA_GT_LANG TRANSPORTING SRNO.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
    CONCATENATE 'MATEDESC-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
    CLEAR WA_IT_FLDCAT.
    WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
    WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
    WA_IT_FLDCAT-DATATYPE = 'CHAR'.
    WA_IT_FLDCAT-INTLEN = 40.
    WA_IT_FLDCAT-TABNAME = '<FS_2>'.
    APPEND WA_IT_FLDCAT TO IT_FLDCAT .
    CLEAR WA_GT_LANG.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
    CONCATENATE 'BASDAT-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
    CLEAR WA_IT_FLDCAT.
    WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
    WA_IT_FLDCAT-DATATYPE = 'CHAR'.
    WA_IT_FLDCAT-INTLEN = 255.
    WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
    WA_IT_FLDCAT-TABNAME = '<FS_2>'.
    APPEND WA_IT_FLDCAT TO IT_FLDCAT .
    CLEAR WA_GT_LANG.
ENDLOOP.
V_FIELDNAME = 'MATNR'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Matnr'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 1.
V_FIELDNAME = 'BEGRU'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'BEGRU'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 2.
ENDFORM.                    " get_lang
*&      Form dynamic_tables
*       text
* --> p1        text
* <-- p2        text
FORM DYNAMIC_TABLES.
ASSIGN LT_DATA TO <FS_DATA>.
* Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG           = IT_FLDCAT      " Fieldcatalogue
    IMPORTING
      EP_TABLE                  = <FS_DATA>     " Dynamic Internal Table
    EXCEPTIONS
      GENERATE_SUBPOOL_DIR_FULL = 1
      OTHERS                    = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
* Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
ENDFORM.                    " dynamic_tables
*&      Form populate_final_table
*       text
* --> p1        text
* <-- p2        text
FORM POPULATE_FINAL_TABLE.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
    READ TABLE GT_LANG INTO WA_GT_LANG
              WITH KEY SPRAS = GV_TEXT_OUTPUT_LINE-SPRAS.
    IF SY-SUBRC EQ GC-FOUND.
      GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
    ENDIF.
    MODIFY GT_TEXT_OUTPUT_LINE FROM GV_TEXT_OUTPUT_LINE.
ENDLOOP.
ENDFORM.                    " populate_final_table
*&      Form populate_dynamic_table
*       text
* --> p1        text
* <-- p2        text
FORM POPULATE_DYNAMIC_TABLE.
DATA: INDX TYPE SY-TABIX.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
    AT NEW MATNR.
      INDX = SY-TABIX.
      ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
      <F> = GV_TEXT_OUTPUT_LINE-MATNR.
      ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
      <F> = GV_TEXT_OUTPUT_LINE-BEGRU.
    ENDAT.
    LOOP AT GT_LANG INTO WA_GT_LANG.
      IF GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
        V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + 2.
        ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
        <F> = GV_TEXT_OUTPUT_LINE-MAKTX.
        V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
        ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
        <F> = GV_TEXT_OUTPUT_LINE-LTXT40.
      ENDIF.
    ENDLOOP.
    AT END OF MATNR.
      APPEND <LWA_LINE_WA> TO <FS_2>.
      CLEAR <LWA_LINE_WA>.
    ENDAT.
ENDLOOP.
ENDFORM.                    " populate_dynamic_table
*&      Form LAYOUT
*       text
* --> p1        text
* <-- p2        text
FORM LAYOUT.
CLEAR L_LT.
L_LT-ZEBRA = GC-YES.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = GC-TXT.
ENDFORM.                    " LAYOUT
*&      Form populate_download_table
*       text
* --> p1        text
* <-- p2        text
FORM POPULATE_DOWNLOAD_TABLE.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG           = IT_FLDCAT         " Fieldcatalogue
    IMPORTING
      EP_TABLE                  = <FS_DATA1> " Dynamic Internal table
    EXCEPTIONS
      GENERATE_SUBPOOL_DIR_FULL = 1
      OTHERS                    = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
* Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
DATA: STRN1 TYPE STRING,
        STRN2 TYPE STRING,
        INDX TYPE SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-MAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-AUT.
LOOP AT GT_LANG INTO WA_GT_LANG.
    V_VAR1 = WA_GT_LANG-SRNO + 2.
    CONCATENATE 'MATERIALDESCRIPTION-' WA_GT_LANG-LAISO INTO STRN1.
    ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = STRN1.
    V_VAR1 = WA_GT_LANG-SRNO + V_LINES + 2.
    CONCATENATE 'BASICDATA-' WA_GT_LANG-LAISO INTO STRN2.
    ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = STRN2.
ENDLOOP.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
APPEND <LWA_LINE_WA1> TO <FS_22>.
V_VAR1 = 0.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
    AT NEW MATNR.
      INDX = SY-TABIX.
      ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
      <FA> = GV_TEXT_OUTPUT_LINE-MATNR.
      ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
      <FA> = GV_TEXT_OUTPUT_LINE-BEGRU.
    ENDAT.
    LOOP AT GT_LANG INTO WA_GT_LANG.
      IF GV_TEXT_OUTPUT_LINE-SRNO EQ WA_GT_LANG-SRNO.
        V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + 2.
        ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
        <FA> = GV_TEXT_OUTPUT_LINE-MAKTX.
        V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
        ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
*        STR = GV_TEXT_OUTPUT_LINE-LTXT40.
*        SEARCH STR FOR ';'.
*        DO.
*          IF SY-SUBRC = 0.
*            SPLIT STR AT ';' INTO STR1 STR.
*            <FA> = STR1.
*            APPEND <LWA_LINE_WA1> TO <FS_22>.
*            SEARCH STR FOR ';'.
*            CLEAR <LWA_LINE_WA1>.
*          ELSE.
*            EXIT.
*          ENDIF.
*        ENDDO.
*        <FA> = STR.
*        APPEND <LWA_LINE_WA1> TO <FS_22>.
        <FA> = GV_TEXT_OUTPUT_LINE-LTXT40.
      ENDIF.
    ENDLOOP.
    AT END OF MATNR.
      APPEND <LWA_LINE_WA1> TO <FS_22>.
      CLEAR <LWA_LINE_WA1>.
    ENDAT.
ENDLOOP.
ENDFORM.                    " populate_download_table
thanks
Nitya

How to create an internal table with fields from different sources

Hi.
I need to create an internal table where some of the fields are from a database table, and the other fields are user specified. How do i do that?
Example:
DB table ZTAB with fields ZTAB-FIELD1, ZTAB-FIELD2.
I want to create an internal table ITAB with the fields ZTAB-FIELD1, ZTAB-FIELD2 from ZTAB. In addition, I also want to have one more field RECORD_NO, which is not from ZTAB. How do I do it? Could I do something like below?
DATA BEGIN OF ITAB.
        INCLUDE STRUCTURE ZTAB.
DATA RECORD_NO TYPE I.
DATA END OF UPLINE.
Or, are there more efficient way of doing it? Thanks.

hi KIan,
go:
general type
TYPE : BEGIN OF ty_itab,
           field1 TYPE ztab-field1,
           field2 TYPE ztab-field2,
*your own fields here:
           field TYPE i,
           field(30) TYPE c,
           END OF ty_itab.
work area
DATA : gw_itab TYPE ty_itab.
internal table
DATA : gt_itab TYPE TABLE OF ty_itab.
hope this helps
ec

How to create a generic datasource from function module?

Dear experts,
I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
I have now some difficulties to continue:
In this function module, i get data from different transparent tables. Then i put these data into an internal table.
I just don't know what is the relatioin between the structure i defined and this internal table.
I should make "iTab structure AA" in the source code?
Thanks

Hi..
check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " XXXX " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
.Create a function group .
. Structure ZTXXXX
Create function module (i.e. ZTESTXXX) .
. Create the data source using transaction (RSO2).
. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter .
Test the datasource in R/3 using transaction RSA3.
Transfer the data source to BW System and replicate it in the BW-System.
Message was edited by:
shiv

How to create a hierarchy datasource in BW

Gurus-
Here is my requirement.
I am asked to create a DSO and equivalent datasource for profit center. How to create a datasource for profit center in BW?

what does ur DSO has to do with the hierarchy? And subject line and the subject are misleading.
these are some of the std PCA datasources:
0PROFIT_CTR_0106_HIER
0PROFIT_CTR_ATTR
0PROFIT_CTR_TEXT
0EC_PCA_1                         Profit Center: Transaction Data on Accounts
0EC_PCA_2                         Profit Center: Statistical key figures
0EC_PCA_3                         Profit Center: Actual Line Items
0EC_PCA_4                         Profit Center: Actual Line Items Periodic Transfer

How to create an internal table in a Report from File of FTP Server.

Hi All,
I want to create an internal table in a Report program. But the problem is I have to download two latest files from FTP server.
Now, based in those file I have to design internal tables in current program. The problem is the program from which these files are being generated has options to display some fields in the output. Hence, the columns of these files becomes dynamic due to which I am not able to design the internal table in my current program...Please Help.
Regards & Thanks.
Prashant.

Hi,
Or you can use the RTTS classes...
Plenty of examples over here.
one external link: http://help-abap.zevolving.com/2008/09/dynamic-internal-table-creation/
Kr,
Manu.

How to create a MYSELF Datasource

Hello,
can any body help me creating a MYSELF Datasource from which i can create a InfoCube ..
My requirement is
I want to partition my InfoCube for which i want to transfer all my data that is in my present Cube to another dummy InfoCube. So that i can make partition to my InfoCube..
Thanks
Noor

Hi Noor,
The steps to copy the data from One cube to another cube which has the same structure is described in the below link:
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Re: Copying the structure of an Infocube
Hope this helps.
Bye
Dinesh

How to create a JDBC datasource thru script/xml?

Hello All,
Is there any way to create a JDBC datasource using some script or xml file that
can be deployed to WLS 7.x?
This feature is required for our J2EE application installation program.
rgds
MS

Hi
See this thread for connecting SQL Server
Re: what is the process to connect to database from webdynpro ?
For Oracle
try
{DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@Oracle_server_ip:Oracle port:SID of the Database","user_name","password");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("your query");
}catch(Exception e){
see this thread
Webdynpro and Oracle
Kind Regards
Mukesh

How to create a Custom DataSource ?

Hi to everybody,
I'm a little confused about creating a custom DataSource that i need to create a player
that shows as a video some jpeg images retrieved from an input stream.
question 1:
do i have to store all the images in the data source ? or i can just set the current image every time i rereceive a new image ?
question 2:
can i link my JpegInputStream to my custom data source in order to read the images ?
thank you in advance
ps please help me .. it's really important.
Marco
Message was edited by:
lecoramarco
Message was edited by:
lecoramarco
Message was edited by:
lecoramarco

hi
u will have to create DS using FM.
use the standard function module and edit the FM as per ur need.
this post should help u....
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
cheers.

How to create generic text datasource to load text data?

met issue in generic master data load
Hi,
please see above link for detail infomation regarding the attribute data load. now the language and description column of the infoobject s_saled is empty. i need to create a generic text datasource to load data from R3 to BW. the table which i use to extract attribute data is VBAK, but i don't find any filed relate to language and description.
met issue in generic master data load
can anyone tell me how to load the text data?
thanks very much.
Eileen

hi eileen,
go to transactio rso2 in your source system ie r/3.
there u have three three fields for transaction data
attributes.
text.
choose text and proceed as u did for trancsaction data load.
thank u,
reward if helpful.

How to create an internal table with a types structure?

Hi experts,
I've 3 internal tables with the same structure, I think I could put a type structure and put that type inside the body of the internal data, is this possible? If true, how can I put that?
Example:
TYPES: Begin of type_s,
               pernr like pa0001-pernr,
             end of type_s.
Data: begin of itab_1 occurs 0,
¿¿¿??? reference to type_s
         end of itab_1.
Thanks a lot,
Regards,
Rebeca

Hi,
Use like this..
DATA: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
DATA: BEGIN OF ITAB_1 OCCURS 0.
INCLUDE STRUCTURE type_s.
DATA: END OF ITAB_1.
Otherwise like this.
types: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
Data: itab_1 type standard table of type_s.
Note: You have to create work area explicitly.
Like this
data wa like itab1.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 26, 2009 1:04 PM

How to create infosource for datasource?

dear all,
how does 1 go about creating infosource for a particular datasource to update to 2 infoobjects?

Raj,
Thanks for your reply
when i right click to create my infosource i input this datasource name 0EMPLOYEE_USER_ATTR
and i get this error
Pos. 1 of the InfoSource must be diff. to one of char.: 0123456789YZ.
Message no. RSAR150
any idea?

How to creat an internal datasource

Similar Messages

Maybe you are looking for