How to create a a labview sequence with teststand

hi  everybody,
it might be this question but i haven't found any. I am using TestStand 2.0 and LabVIEW 7.0 and i wanna use labView Sequence adapter to create sequences by using labView step.
So that's how i do.
1) After choosing the labveiw standard prototype adapter, i select a step in the sequence let's say the numeric limit step
2) then I specify the module and choose the option create VI...
3) Then I have a labview front panel window that appears with test data and error out
4) I just add a sequence context in the front panel, take a set property value module, link that module to  the sequence context and in the test data as show as in different examples i found
5) but after all when i run the step that is error message i have:
     LabVIEW : parameter Sequence Context not found in the VI's connector pane.
     -18002; LabVIEW reported an error. See 'LabVIEW : ' message for more details.
it's seems that i don't connect my sequence context to the VI's connector pane but i don't know how to do it. i tried to figure that out by reading some previous post but i still can't.
First what's is a VI's connector pane and do you have access to that? Can you explain me that step by step
Thanks in advance for your help.
Christelle

Hi,
In the Specify LabVIEW Module is a checkbox if you need the Sequence Context in your VI.
You should enbale this before creating the VI. If this is done, then you will not have to add the sequence context control to your VI, because it will already be there.
But from your notes, you dont appear to be adding the Sequence Context control to your VI connector pane.
If you do this, then it should all start to work.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

  • Teach me how to create the opening "hallway" sequence using Adobe After Effects

    I need to create a memorial video for a loved one that passed away. Can someone teach me how to create the opening "hallway" sequence using AE? here is the video from youtube: https://www.youtube.com/watch?v=4191kcW07f0 . Thanks

    I'll give a very brief overview but, presuming that you are new to After Effects, understanding and executing on this overview will require learning the basics of After Effects.
    You'll be creating a 3D scene based on a few 3D layers: one each for the floor and each wall. Each of those 3D layers will be a precomposition layer; the wall layer with the pictures will be based on a precomposition in which you have placed your pictures as individual layers. You will create some 3D lights shining down from above. You'll create a 3D camera that you will then animate to move down the hallway.
    As I said, that is a very brief overview. Understanding each of those pieces will require some learning. After Effects is not a simple application, so you do need to be prepared to put in some learning time if you are going to do this yourself. Here is the place to start: http://adobe.ly/AE_basics
    All that said, I would recommend that you hire someone to do this for you. Learning a new and complex creative application under the time pressure (and other pressure) that you are under may be too much to ask.

  • How to create a custom function module with the records in SAP R/3?

    Hi All,
    How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
    Regards
    Sara

    Hi
    goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
    Look at the below SAP HELP links, These links will show you the way to create a Function Module
    http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

  • How to create Using Formatted Text Field with multiple Sliders?

    Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
    my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
    // constructor
    label1 = new JLabel( "Individuals" );
    scroller1 = new JSlider( SwingConstants.HORIZONTAL,     0, 100, 10 );
    scroller1.setMajorTickSpacing( 10 );
    scroller1.setMinorTickSpacing( 1 );
    scroller1.setPaintTicks( true );
    scroller1.setPaintLabels( true );
    scroller1.addChangeListener(this);
    java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
    NumberFormatter formatter = new NumberFormatter(numberFormat);
            formatter.setMinimum(new Integer(0));
            formatter.setMaximum(new Integer(100));
    textField1 = new JFormattedTextField(formatter);
    textField1.setValue(new Integer(10)); //FPS_INIT
    textField1.setColumns(1); //get some space
    textField1.addPropertyChangeListener(this);
    //React when the user presses Enter.
    textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0),  "check");
            textField1.getActionMap().put("check", new AbstractAction() {
                public void actionPerformed(ActionEvent e) {
                    if (!textField1.isEditValid()) { //The text is invalid.
                        Toolkit.getDefaultToolkit().beep();
                        textField1.selectAll();
                    } else try {                    //The text is valid,
                        textField1.commitEdit();     //so use it.
                    } catch (java.text.ParseException exc) { }
    label2 = new JLabel( "Precision" );
    scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
    scroller2.setMajorTickSpacing( 10 );
    scroller2.setMinorTickSpacing( 1 );
    scroller2.setPaintTicks( true );
    scroller2.setPaintLabels( true );
    scroller2.addChangeListener(this);
    textField2 = new JFormattedTextField(formatter);
    textField2.setValue(new Integer(10)); //FPS_INIT
    textField2.setColumns(1); //get some space
    textField2.addPropertyChangeListener(this);
    //React when the user presses Enter.
    textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0),  "check");
            textField2.getActionMap().put("check", new AbstractAction() {
                public void actionPerformed(ActionEvent e) {
                    if (!textField2.isEditValid()) { //The text is invalid.
                        Toolkit.getDefaultToolkit().beep();
                        textField2.selectAll();
                    } else try {                    //The text is valid,
                        textField2.commitEdit();     //so use it.
                    } catch (java.text.ParseException exc) { }
    // State Changed
         public void stateChanged(ChangeEvent e) {
             JSlider source = (JSlider)e.getSource();
             int fps = (int)source.getValue();
             if (!source.getValueIsAdjusting()) { //done adjusting
                  if(source==scroller1)   {
                       System.out.println("source ==scoller1\n");
                       textField1.setValue(new Integer(fps)); //update ftf value
                  else if(source==scroller2)     {
                       System.out.println("source ==scoller2\n");
                       textField2.setValue(new Integer(fps)); //update ftf value
             } else { //value is adjusting; just set the text
                 if(source==scroller1)     textField1.setText(String.valueOf(fps));
                 else if(source==scroller2)     textField2.setText(String.valueOf(fps));
    // Property Change
        public void propertyChange(PropertyChangeEvent e) {
            if ("value".equals(e.getPropertyName())) {
                Number value = (Number)e.getNewValue();
                if (scroller1 != null && value != null) {
                    scroller1.setValue(value.intValue());
                 else if (scroller2 != null && value != null) {
                    scroller2.setValue(value.intValue());
        // ACTION PERFORMED
        public void actionPerformed(ActionEvent event) {
        if (!textField1.isEditValid()) { //The text is invalid.
            Toolkit.getDefaultToolkit().beep();
            textField1.selectAll();
        } else try {                    //The text is valid,
            textField1.commitEdit();     //so use it.
        } catch (java.text.ParseException exc) { }
             if (!textField2.isEditValid()) { //The text is invalid.
            Toolkit.getDefaultToolkit().beep();
            textField2.selectAll();
        } else try {                    //The text is valid,
            textField2.commitEdit();     //so use it.
        } catch (java.text.ParseException exc) { }
    ...

    if :p3_note_id is null
    then
    insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
    Another option is that you have a trigger on table NOTES that generates a new note_id even for an update.

  • How to Create an Input Schedule Comparison with Data Using EVDRE

    Hello,
    I try implement the scenario described in "How to Create an Input Schedule Comparison with Data Using EVDRE".
    Once I am using the "Insert Function" from the panel and selecting the EVTIM function Excel crashes (see page 8 How to paper).
    Systems:
    BPC 7.0 NW SP02
    Office 2007
    BPCADminClient and BPCOfficeClient up to date
    Have anyone a solution?
    Thanks
    Oktay

    Hi Oktay -
    This function works in my BPC70NW SP02 system. Your issue might be that you are trying to access a TIME member that does not exist. Please make sure the offset value is a valid dimension member.
    I can confirm that EVTIM does allow the offset for base members (such as 2009.MAY) as well as parent nodes (such as 2009.Q1 or 2008.TOTAL)... BUT...the offset result of the EVTIM function needs to be a valid dimension member!
    Regards,
    Sheldon

  • How to create user editable Crystal Report with dynamic dataset

    What I would like to achieve:
    A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
    What I do:
    CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
    CrReport.Load(TemplateFilename)
    Dim Results As DataTable
    DataTable is filled from a database
    CrReport.SetDataSource(mResults)
    CrReport.SaveAs(NewReportPath, True)
    The NewReportPath is opened in the default program.
    What are the problems
    The report is open in preview mode (not in design).
    When the field is added to the report the designer asks for XML datasource on preview.

    The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

  • How to creat the Varient for 1099MISC With Holding Tax

    How to create the Variant for 1099MISC With Holding Tax ?

    HI,
    please follow the below steps to create variant at report.
    tcode se38
    report RFIDYYWT
    pass all the parameters
    press save icon
    give variant name
    retrive the variant in report
    tcode se38
    report name RFIDYYWT
    press : shift + F5
    or get varinat icon.
    I hope above will resolve your issue.
    Regards
    Madhu M

  • How to create new view without interlinking with gantt chart or resource views

    ok clear
    one another question
       In msp how to create new view without interlinking with gantt chart or resource views

    Hi Shiv PMC--
    I splitted your question above in another thread in order not to have  a huge thread with many topics in it.
    That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
    table) or a table with a timephased grid (resource and task usage).
    Please give us more information, maybe with a concrete example so we can help you.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • How to create labeled table of Content with expand and collapse

    Hi All,
    Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
    User1
    Template1
    Template2
    User2
    +
    User3
    Template1
    Template2
    Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
    Thanks
    Bhupendra

    Hi,
    Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
    Expand/Collapse are part of HGRID.
    I think we can develop this functionality with little manipulation.
    Regards,
    Reetesh Sharma
    Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM

  • How to create tcode for modulepool program with selection screen?

    hi,
       How to create tcode for modulepool program with selection screen?
    thanks,
    sagar

    Hi,
    We need to goto SE80.
    In our program we right click on object name and goto create
    -> transaction. Enter the module pool program and screen number and save and activate.
    Or by SE93 also we can create a transaction code for our program.
    Hope ths helps.
    plz reward if useful.
    thanks,
    dhanashri..
    Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

  • How to create a new user aaa with same rights as existing user bbb ?

    Assume user bbb already exists in Oracla 10g database.
    How can I create a new user aaa with the same rights/permissions as the old user bbb?
    Is this procedure/command also working if the old user is user "system" (=dbadmin)?

    There is some possibilty to generate a EXPDP dump file which contains only DDL statements related to account and
    privileges: EXCLUDE/INCLUDE parameter can help.
    For example, following EXPDP statements seem to work with SYSTEM account:
    expdp / schemas=system content=metadata_only exclude=table,sequence,package,function,procedure,synonym,,type view dumpfile=DPD:system.dmp logfile=DPD:system.log
    Export: Release 10.2.0.2.0 - Production on Thursday, 14 February, 2008 9:41:36
    Copyright (c) 2003, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Starting "OPS$XXX"."SYS_EXPORT_SCHEMA_01":  /******** schemas=system con
    tent=metadata_only exclude=table,sequence,package,function,procedure,synonym,type view dumpfile=DPD:system.dmp logfile=DPD:system.log
    Processing object type SCHEMA_EXPORT/USER
    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
    Processing object type SCHEMA_EXPORT/ROLE_GRANT
    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    Master table "OPS$XXX"."SYS_EXPORT_SCHEMA_01" successfully loaded/unload
    ed
    Dump file set for OPS$XXX.SYS_EXPORT_SCHEMA_01 is:
      C:\TEMP\SYSTEM.DMP
    Job "OPS$XXX"."SYS_EXPORT_SCHEMA_01" successfully completed at 09:41:41
    impdp / sqlfile=dpd:system.sql dumpfile=DPD:system.dmp logfile=DPD:system.logImport: Release 10.2.0.2.0 - Production on Thursday, 14 February, 2008 9:42:46
    Copyright (c) 2003, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Master table "OPS$XXX"."SYS_SQL_FILE_FULL_05" successfully loaded/unload
    ed
    Starting "OPS$XXX"."SYS_SQL_FILE_FULL_05":  /******** sqlfile=dpd:system
    .sql dumpfile=DPD:system.dmp logfile=DPD:system.log
    Processing object type SCHEMA_EXPORT/USER
    Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
    Processing object type SCHEMA_EXPORT/ROLE_GRANT
    Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
    Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    Job "OPS$XXX"."SYS_SQL_FILE_FULL_05" successfully completed at 09:42:50and system.sql is:
    -- CONNECT OPS$XXX
    -- new object type path is: SCHEMA_EXPORT/USER
    -- CONNECT SYSTEM
    ALTER USER "SYSTEM" IDENTIFIED BY VALUES '970BAA5B81930A40'
          TEMPORARY TABLESPACE "TEMP";
    -- new object type path is: SCHEMA_EXPORT/SYSTEM_GRANT
    GRANT GLOBAL QUERY REWRITE TO "SYSTEM";
    GRANT CREATE MATERIALIZED VIEW TO "SYSTEM";
    GRANT SELECT ANY TABLE TO "SYSTEM";
    GRANT CREATE TABLE TO "SYSTEM";
    GRANT UNLIMITED TABLESPACE TO "SYSTEM" WITH ADMIN OPTION;
    -- new object type path is: SCHEMA_EXPORT/ROLE_GRANT
    GRANT "DBA" TO "SYSTEM" WITH ADMIN OPTION;
    GRANT "AQ_ADMINISTRATOR_ROLE" TO "SYSTEM" WITH ADMIN OPTION;
    GRANT "MGMT_USER" TO "SYSTEM";
    -- new object type path is: SCHEMA_EXPORT/DEFAULT_ROLE
    ALTER USER "SYSTEM" DEFAULT ROLE ALL;
    -- new object type path is: SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
    BEGIN
    sys.dbms_logrep_imp.instantiate_schema(schema_name=>SYS_CONTEXT('USERENV','CURRENT_SCHEMA'), export_db_name=>'BAS002.REGRESS.RDBMS.DEV.US.ORACLE.COM', inst_scn=>'1456160');
    COMMIT;
    END;
    -- new object type path is: SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
    BEGIN
    SYS.DBMS_AQ_IMP_INTERNAL.CLEANUP_SCHEMA_IMPORT;
    COMMIT;
    END;
    / These export and import steps don't take into account privileges granted on schema objects belonging to another user likely due to to the EXCLUDE statements.
    Message was edited by:
    Pierre Forstmann

  • How to creat a summary of report with .txt

    Hi All,
         I want to creat a summary of report with .txt,and i have disabled the function about report generation in teststand.
         i created a complex sequence,it include some sub-sequences,example:the uut is tested on three different temperatures and four different voltages conditon.So i have creat three sub-sequences (diffrent temperatures) include four steps (different voltages),then mainsequence invoke three sub-sequences to excute test.
        i only want get the fail-step's summary with,include: fail-step's name,status 
        how to do?thanks a lot
    Solved!
    Go to Solution.

    You can use Parameters.Step.Name to get the failed step name. You can also use something like Parameters.Step.StepType.Name == "NI_MultipleNumericLimitTest" to filter different types of steps.
    As far as finding the entire failure chain...
    You can check RunState.CallStackDepth to see how many callers deep you are. Based on that information you can use RunState.Caller.Caller.(continued for however many callers deep you are).RunState.Step.Name or .Sequence.Name
    So if the CallStackDepth is 1, you would only need to use one Caller. If it was 2, you would need to recursively use 1 Caller and then 2 Callers and so on.
    CTA, CLA, MTFBWY

  • How to create graphics in labview?

    Dear All,
    I'm a graduate student at University of Alabama at Birmingham, AL. I'm working on a project in which I have to design experiments for the undergraduate students to introduce them with the LabVIEW software. In one of the experiments I want to simulate tank level  control application in LabVIEW. For this application I need pictures of tank, pump, pipes, etc.
    I would appreciate if anybody could guide me about how to create such graphics in LabVIEW.
    Regards,
    Amit Darwhekar
    Birmingham, AL

    Amit,
    Here are some other great links to help get you on your way.
    LabVIEW Introduction Course - Three Hours
    LabVIEW Introduction Course - Six Hours
    Creating Custom Controls, Indicators, and Type Definitions
    Hopefully you'll find this information helpful, but post back if you'd like more help.
    Chris C
    Chris Cilino
    National Instruments
    LabVIEW Product Marketing Manager
    Certified LabVIEW Architect

  • Vision DevMod: How to create large Gaussian filter kernels with integer values like Vision Assistant uses

    Hello,
    in Vision Assistant it is possible to create filter kernel of arbitrary size, like e.g. a 75x75 Gaussian kernel. These kernels feature integer-only elements. I tried to find a function in the Vision Development Module, but have been unable to find something so far. So I still create a Vision Assistant script with such a kernel and export it to a LabVIEW VI in order to abtain such a kernel. Any ideas on how to create such kernels programmatically?

    -You can generate custom kernels in LabVIEW also, but you need to have either string or numerical of that kernels. Without these two, i am not sure of how to do this.
    -Please check this for building kernels.
    http://zone.ni.com/reference/en-XX/help/370281M-01​/imaqvision/imaq_buildkernel/
    -Let's say you are able to programmatically generate kernel string, it will convert to kernel in double format automatically and connect this to convolute vi.
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • How can I stop an action sequence with another

    Hi,
    I am quite new to flash catalyst. I made a side with an office where you can click the phone to go to the status "phone". In there you should be able to call some virtuell people. I made buttons with names that trigger different action sequences with showing the name of the called person in the display and playing a sound file that sounds like a call. Now my problem is when I am clicking a different name while it is still in one action sequence, the other one shows up over the first and both sounds are playing at the same time.
    How is it possible to tell the action sequence to stop all others when it is started?
    Thank you for your help.

    Sorry, I'm a bit confused now. Just to clear this out:
    WDDOBEFOREACTION is for validating user inputs BEFORE Actions and HERE you can prevent actions from happening
    WDDOAFTERACTION is called JUST WHEN an action is happening for all visible Views (it's to prevent redundant code which would be equal for all event handlers)
    WDDOBEFORENAVIGATION is AFTER Actions and BEFORE navigation.
    Check the chart in the following Link (sorry it's german, english version seems not available, but the chart is in english nevertheless)
    http://help.sap.com/saphelp_nw73/helpdata/de/49/b8c706c7c26d7ce10000000a421937/content.htm
    In my opinion put an if clause into WDDOBEFOREACTION, check whether the respective field is filled; and in case it is filled, execute your method; if not, don't.
    That's why I am confused, you kind of answer your question within your question itself )) or I still don't understand what you want to accomplish.
    best regards, hope this helps you (if not, try to explain it even more detailed for me ;-D)
    Lukas

Maybe you are looking for