How to create a clock with: a reset, start and stop

How can i create a clock that have to do the following thing:
Countdown visual in the screen
Timeset with day's in seconds
- Pressing start -> it start to run
- Pressing stop -> The clock is stopping but it keeps the time, when i press start again then it goes on with counting
- Pressing Reset -> the clock goes back to the start position and waits to start again.
Tia, William
Running with Labview 6.1
Fieldpoint hardware

The key is to use a shift register to hold the previous count...
Attached is a quick and dirty version of what you describe. It displays the passed time as seconds so if you need it to be in days just divide the value by 86400...If you don't need sub-second updates you can increase the wait time.
MTO
Attachments:
Stopwatch.vi ‏39 KB

Similar Messages

How to append data in same log after start and stop signal express

how can i append my data to the same log file after starting and stopping the signal express ? Is there some option to do this. After start/stop it always makes a new log file. How can append datat to the same log file.
Thanks in advance.
Munir

Hello mbhatti,
I founded a KB which seems do describe the way to solve your problem.
Appending Data to the Same File when Logging in LabVIEW SignalExpress :
http://digital.ni.com/public.nsf/allkb/C38AEE499D5CC8C6862572CF006875D2?OpenDocument
I hiope this will help you
Regards
Florian Abry
Application Engineer Group Leader
NI Germany

How to create ONE graph with a growth trend ($ and %)?

I would like to create a graph with a growth trend.
The graph should have figures on one side reflecting $ values and on the other % growth.
I cannot make a trend on the same graph and usually spend ages adding another graph to show the trend. I end up making 2 graphs instead of one.
Please refer to the following really basic graph that will give you an idea.
ex : http://www.tellurideareahomes.com/images/graph1.jpg
Can anyone show how to do that?

What you want requires a bit of trickery.
Chart the bar graph
Chart the trend
then move the trend one above the bar one after setting its background to none.
If this workaround is not OK for you,
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09 (possibly for iWork '99)
Yvan KOENIG (from FRANCE mercredi 19 novembre 2008 11:18:45)

How to create a PDF with substituted key-value and table-values using a template language

I have about 50 key-values and 10 table-values that I want to substitute into a formatted report template (language can be anything standard, would create a small number of these templates) and then use an Adobe tool to substitute the values into the template and produce a PDF. Preferably the template language would permit some basic conditional logic (if <key #> has value <value> then <show key label here> and <key value here> in close spatial proximity on the form) and permit embedding of a static graphic logo, text with fonts/styles, etc. to produce a polished report but also handle pagination (e.g. enable page breaks or numbering) to be handled automatically.
What is a recommended template language and product to accomplish this?

Are you thinking of something like a blank form that you can enter information into, save, and send to another user? If so, what you want is possible. If you want more information, post again and include more details about how you want to use it and how the recipient will use it.

How to create a folder with standard contained folders and files in SharePoint 2013?

I've got folders and files on my SharePoint 2013 site that form a template when I add a new folder for a customer. When I create a new folder for a customer, I want those folders and files added automaticly to that new folder. How can I do that?

How would I go about doing this without Visual Studio? Is that possible? Need to create Folder templates.
Every "new folder" created should have nested folders already included.
Company Name (New Folder 1)
Company Documents (1.01)
Tax Documents (1.02)
Bank Statements (1.03)
Extreme novice, please give as much details as possible! I'm trying to implement SP 2013 without all the 2013 software (Visual Studios, SharePoint Designer, etc.)
Thank you!

How to create a join like: year between start and end

Hello all I have got a dimension and a fact.
normally in sql I would use the following:
fact.year between dimenstion.start_year and dimension.end_year
When I use this, then OBIEE says I have to use operators
So now I am trying:
fact.year > dimension.start_year and fact.year < dimension.end_year
But now OBIEE is saying that I must use the equel operator...
My question is how can I make this type of join?

Thanks for your quick answer... I am trying this now...

Multicam edit with camera that starts and stops

I am editing a multicam shoot and want to create a multicam clip with my two cameras. Camera A never stopped running, but Camera B stop several times. The time code was synced on Free-Run so there is no issues with syncing, but I want all camera B's footage to be on the same video track. Right now when i select all the clips FCP creates a multicam clip with several video tracks (for every new clip). Is there a way i could have it place every clip from camera B into one track so i can edit using camera 1, camera 2, as opposed to going up to camera 50?

It's an option,
No, it's an elegant and practical solution to the production problem caused by your shooter. Free running timecode will drift (rather hopelessly) so you're not really gaining anything tanglible. You still have to sync the clips visually, you won't be able to depend on t/c except as a guide. Which is convenient but not solid.
im working with DVCproHD and a very big project so i don't want to take up more HD space.
You want to get the project done? Go buy another drive for $200.
Also, everything is logged beautifully
Logging incorrectly-acquired footage doesn't amount to much, but, if you need to recapture, you're in luck. If you consolidate the footage into a single clip as suggested, recapturing is simply a question of replacing footage into the master clip and exporting it again.
I've also heard about using camera angles. does anyone know if this would be an option for this?
You only have two cameras and two angles. What have you heard about angles that would suggest them as a solution? Maybe if we understood how you have misunderstood angles, we could help you clear that up.
bogiesan

Help!!! How to create simple menu with buttons.

I basically need help on how to create a menu with Up, Left, Next and Back buttons.
Then it must have a submenus like Telephone, Lights, Fans and Television.
and more sub sub menus of On and Off buttons.
Ive jut started to learn Labview and a newbie at it.
It could be really nice if someone could make an example.
Would appreciate it if it could work like Ipod interface.
Thanksssss! Pls help!

Duplicate post.

Tree node images changes.. with start and stop button

I create the animator extends JPanel, which start and stop can be controlled with Swing Timer. It works fine with animation control over the panel.
Now, I have a tree with each image at each node.
when the start button clicks, one node image should be animated.
It is implementable. If animation.gif would have worked, I did't have to do this, but animation gif has fatal error with time interval.
any words would be appreciated. Thanks =

Damn !
With version 1.2.1 I think you'll have to create a new class that extends PositionPathInterpolator and add a pause() anr resume() method to it.
i suggest something like:
public class MyPositionPathInterpolator() extends PositionPathInterpolator {
// add some constructors if necessary
private float pauseAlphaValue = 0;
// override computeTransform method
public void computeTransform(float alphaValue, Transform3D transform) {
   float newAlphaValue = alphaValue + pauseAlphaValue; // calculate new alpha value
   if(newAlphaValue > 1) // modify it if it is out of bounds
      newAlphaValue -= 1;
   else if (newAlphaValue < 0)
      newAlphaValue += 1;
   super.computeTransform(newAlphaValue, transform); // computeTransform with the right alpha value
public void pause() {
   this.setEnable(false); // it won't compute transform anymore
   pauseAlphaValue = this.getAlpha().value(); // retrieve current alphavalue
public void resume() {
   pauseAlphaValue -= this.getAlpha().value();
   this.setEnable(true) // restart computing transform
}Now you invoke pause and resume methods on your myPositionPathInterpolator object when user clicks on the buttons.
Of course it is a trick and it will work only with increasing alpha.
c ya
GnG

Reset song start and stop times

Resetting start and stop times for all songs.
Hi. I recently trialled a DJ BPM matching software product and unknown to me, it scanned all my songs and in the majority of cases, put new start and stop times (in seconds) so now when I play my songs in iTunes, they either start to play early and/or stop playing before they are complete.
I can go and reset these parameters manually but I have 5000 songs so wondered if there was a utility or a file I could edit that would do this for me as its really annoying that the DJ software didnt reset these when I uninstalled it at the end of the trial period.
Thanks
Jason

You might be able to use this script to reset the start/stop times to zero. Try with a small selection and see if it works for you.
http://dougscripts.com/itunes/scripts/ss.php?sp=batchtrimtime

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

How to create excise invoice with reference thorugh credit memo

Hi All,
Please provide any solution for the following qurey:
How to create excise invoice with reference thorugh credit memo

Hi murali,
i am unable to understand your requirement i think there is no like this scenario requirement for any client
if any requirement is there kindly explain detail
cheers

How to create a complaint with pre-decessor document Inovice?

Hello experts,
I need create a complaint with reference to a pre-decessor document type Invoice (apart from other types such as sales order and service order). Can someone enlighten me
1) how to create an invoice in IC Web Client and backend?
2) how to create a complaint with reference to this created invoice in IC Web client and backend?
Thanks a lot!!!

Hi Easwar
Thanks a lot for answering the question.
Yes I do have CRM Billing documents. But the problem is
a) either the billing document doesn't have Transfer to Accounting status Transferred or
b) a transferred billing document, but all items have error "Unable to offset billing item 90003458 0000000060" etc.
Do you know
1) how I can make a billing document have "Transferred" status? Pressing "Transfer to Accounting" button in the billing document overview page will only set the status to "Being transferred". And it's always being tranfered.
2) What does the error "Unable to offset billing item ... "mean? How to get rid of them?
Thanks a lot!

How to create a table with events in smartforms?

How to create a table with events view in smartforms?
It doesn't like general table with header, main area and footer.
for example:
in smartforms: LE_SHP_DELNOTE
table name is TABLEITEM(Delivery items table)

Vel wrote:
I am creating XML file using DBMS_XMLGEN package. This XML file will contain data from two different database tables. So I am creating temporary table in the PL/SQL procedure to have the data from these different tables in a single temporary table.
Please find the below Dynamic SQL statements that i'm using for create the temp table and inserting the data into it.
Before insert the V_NAME filed, i will be appending a VARCHAR field to the original data.
EXECUTE IMMEDIATE 'CREATE TABLE TEMP_TABLE (UNIQUE_KEY NUMBER , FILE_NAME VARCHAR2(1000), LAST_DATE DATE)';
EXECUTE IMMEDIATE 'INSERT INTO TEMP_TABLE values (SEQUENCE.nextval,:1,:2)' USING V_NAME,vLastDate;What exactly i need is to eliminate the INSERT portion of it,Since i have to insert more 90,000 rows into it. Is there way to have the temp table created with data in it along with the sequence value as well.
I'm using Oracle 10.2.0.4 version.
Edited by: 903948 on Dec 22, 2011 10:58 PMWhat you need to do to eliminate the INSERT statement is to -- as already suggested by others - eliminate the temporary table. You don't need it. It is just necessary overhead. Please explain why you (apparently) believe that the suggestion of a view will not meet your requirements.

How to create shipment document with out inbound delivery document

Dear Friends
How to create shipment document with out outbound/inbound delivery document.
In my client scenario, there is no inbound delivery for normal purchases.
Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
Can we do shipment creation with reference to PO?
If it is possible, how it will be?
Please let it solve
With regards
Lakshmikanth

Dear Sameer,
Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
For more information please go through this SAP help link
Note:- Shipment process need to be carry out for the deliveries before PGI.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
I hope this will help you,
Regards,
Murali.

How to create a clock with: a reset, start and stop

Similar Messages

Maybe you are looking for