How to create a DAQmx task in LabVIEW ?

I want to create a new DAQmx task in LV. I've used 'create new task' VI in LV. Bt I want to see the created task in MAX task list also.
There is no hardware device connected. Its just simulation.
Solved!
Go to Solution.

Here's a driver we use. The design intent is to make sure the software provides the tasks that we need so it's not dependant on resources already existing.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
Attachments:
DAQDIO_InitializePorts.vi ‏34 KB

Similar Messages

How do i pass a daqmx task from labview to matlab using the math interface toolkit?

I want to use DAQMX functions from Matlab using the Math Interface Toolkit (MIT). How can I have a labview function output (return) the DAQMX task to matlab via the MIT?
I want to do this so I can start a DAQMX task in Labview from a matlab function and return control to matlab without losing the task.

Hi Mark,
(I already posted this answer in your other thread, but let's keep THIS thread alive - it makes more sense here in the LabVIEW forum than in Instrument Control forum.)
Since the DAQmx Task is not a native data type that can be passed directly to MATLAB from LAbVIEW, try flattening the DAQmx Task to a string before passing to MATLAB. However, I doubt that you can access the task from within MATLAB, but feel free to give it a try.
Good luck!
- Philip Courtois, Thinkbot Solutions

How to get running Daqmx task handles

HI,
We are creating a TestStand module using CVI 8.5, in that module we have to close all the running Daqmx tasks, please provide help on how to get running Daqmx task handles. We could not find any API function which can return list of running Daqmx task handles so that we can close one by one.
Thanks in advance for the help

I just had a similar issue. Stumbled on this forum in the hopes of getting an answer and found no reply to the original message. I think this is what we are both looking for DAQmxGetSysTasks.
I havent used it yet. Still in the excited I found something stage.

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

How to create a warehouse task in EWM

Hi Experts,
In Extended Ware house management(EWM), how to create a Warehouse Task against inbound delivery order,
if there any standard method's is available, if not any custom methods, plz let me know.
my issue :
am retrieving a Productid, batch, location from various tables.
now along with this i have to find the inbound delivery order,
for this inbound delivery order , i need to create a warehouse task.
please let me share.
Regards,
Nag.

from PFTC itself. Same.

How to create a standalone executable in LabVIEW 2009 Professional Development System?

How to create a standalone executable in LabVIEW 2009 Professional Development System?
Solved!
Go to Solution.

This should help you out http://zone.ni.com/devzone/cda/tut/p/id/3303
Also remember that quick search with Google in many cases will be quicker than asking in this forum. I always use Google before I ask for help in any forum. It is much quicker
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

How to create a login interface in labview PDA module?

How to create a login interface in labview PDA module? So that it checks with a list of usernames and passwords and allow to go to another VI?
Anu

Anu,
I've attached a really short example that does something like what you're talking about. It just compares the user's username and password a pre-determined username and password and then "logs the user in" based on that comparison. Like Greycat said, you probably want to store this username and password info in some sort of file on the PDA that's in an encrypted format for both security and flexibility of your application.
I hope this helps,
Justin D.
Applications Engineer
National Instruments
Attachments:
LoginVI.vi ‏17 KB

How to create web applications with the LabVIEW web server

Wonderful Forum,
I've noticed that sometimes it can be tricky for LabVIEW users to learn how to create their own custom web clients using the LabVIEW web server. I created a LabVIEW web development community group and wrote some tutorials to teach the basics of creating web clients using HTML, Javascript, and AJAX. The idea is that LabVIEW users without any web background can quickly look at some tutorials and examples to get started on their own projects.
https://decibel.ni.com/content/groups/web-services
What do you think?
Joey S.
Software Product Manager
National Instruments

Hi Joey,
A great idea! I recently presented at a local user group meeting about my WebSockets API (see the links in my signature). I've uploaded the presentation and the demo code I gave to our UG here.
I think the barrier to entry is with needing to know the web languages (e.g. html/css/js) as well as writing your LabVIEW code. I have joined the group and look forward to seeing some interesting content on there! Certainly some demos of using AJAX to make requests to Web Services and do something with the data (e.g. display on a graph) would be a good place to start.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

How to create fourier transform properties using labview

Hi everyone
i am a new user to Labview and i only have 2 weeks left to complete an assignment.
This assignment involves the implementation of the various types of fourier transform properties using Labview. These properties include linearity, time shifting, frequency shifting, time scaling,
I do not really know how to implement them using Labview
PLS HELP!!!
Thanks

i am refering to the fourier transform properties listed below:
A) time shifting
x(t-a) ------- > exp (-jwa) X(w)
For the time shifting property above, i have problem creating the exponential term using labview
B) time scaling
x(at)-----------> 1/a X (w/a)
C) Time convolution
Y(w) = F[h(t) * x(t)] = H(w)X(w)
where * stands for the convolution operation and F stands for fourier transform
Please provide diagrams if possible. Thank you
PLEASE HELP!!!!!!!! THANKS!!!!!!!

How to create CVI drivers from existing LabView HP816x.fp

I downloaded an instrument driver from the www.agilent.com; Instructions are provided to convert drivers for LabView from the provided HP816x.fp, however, I need to create them for LabWindows CVI.

If you downloaded Agilent 816x VXI Plug&Play Driver, you can use it in CVI immediately. You don't need conver anything for CVI. fp file is part of CVI driver.
In project window select menu item Instrument>>Load. Load the hp816x.fp. Add #include to your C code and you can use all function from driver.
Help about converting fp for labview describes how easy create LabVIEW driver. This convertion make llb file with VIs for every function from Fp panel. These VIs call functions from hp861x_32.dll. If you are using CVI you don't need do it. This help is only for LabVIEW users.
Zdenek

How Programmatically Creating a Free Label in LabVIEW

I know that I can change the text of existing free text (decorations) in LabVIEW. Can I programmatically create a free label in LabVIEW. like adding a copyright notice to a bunch of VI's
Thanks in advance
Stu
Stu McFarlane
Viewpoint Systems, Inc.

Not with the stock LabVIEW. If you have a license to use scripting then you can do it that way.

How to create the new task without time through WCAP

Hi
I am trying to create the new task by using WCAP commands. I want to create the task with out time, that is "no time" option that u see in the web access. If I set the duedate without time its putting 12:00 AM as default. Is there any option that I need to set for WCAP command in order to set the "no time" option. Any help is appreciated.
Thanks
Hari

Hi Anusha,
This code correct for your requirement, only thing is you are not able to modify it as per your requirement.
What you have to do is:
1. Copy queried row into into new row, change primary key values(but don't commit your changes here).
2. Now you have two rows in your VO(OLD as well as New)
3. Make any changes if you want using User Interface.
4. At the save button first compare OLD and NEW row, if any value is differing then commit the chnages(it will insert new row in corresponding database table), if no changes are there I mean to say OLD value and NEW rows are same then rollback(it will remove copied row from VO and no row will be inserted in database.)
While comparing rows please note that Primary keys will not be same so don't compare Primary keys while comparing rows.
I hope it will help you.
Regards,
Reetesh Sharma

How to create Popups in task flows

Hi,
Can any one help how can we create popup in taskflow. My requirement is i need to do create/edit operation on a table using task flows i have followed the "http://www.oracle.com/technology/obe/obe11jdev/11/btf/bounded_task_flow.html#t6" for create/edit operations in this it's navigating to new page, my case i need to invoke a popup instead of page.
can any one help me.

You need to create a separate tf for the edit and use that as a region in your search page.

How to create an SQL Database using LabVIEW??

Hi all,
I have been using LabVIEW for quite a long time but now I am doing something which I am totally new to. I have a VI which gives out a table as output. What I am trying to do is, I want to create an SQL databse and save this table in the database and I want to pass the value of this table to the SQL Database once in every 24 hours. As I dont have any knowledge of My SQL I am totally stuck.
Can anyone help me by telling me how to do this.?? An example code will be well appreciated.
Regards,
Nitz..

Hi Nitzz,
what have you done and where do you have problems? Did you make a search here in the forum?
http://forums.ni.com/t5/forums/searchpage/tab/message?q=create+database#message-list
Mike

How to create a group box in Labview

I want to make a Group on Items in single window. How to make that one. For ex: In QT this feature is called Groupbox. In Labview I searched this word its not available.
Please help me
Thanks in Advance,
Thanks & Regards,
Harish. G.
Solved!
Go to Solution.

Hi Harish,
search the LabVIEW help for "cluster".
Or do you speak of "simple" decorations and grouping items using the menu button on the front panel?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to create a DAQmx task in LabVIEW ?

Similar Messages

Maybe you are looking for