How to Create a database copy and specify the source database.

Hello,
In my dag environment I would like to create a new database copy and specify the source. My company has database copies in 2 locations. Instead of transferring the data from one location to the other, I would like to specify the source be the copy that is
in the same location.
Thank you,
~Mark

Hi,
We can create a mailbox database, then run EMC and EMS to create a database copy.
More details about Add a Mailbox Database Copy, for your reference:
https://technet.microsoft.com/en-us/library/dd298080(v=exchg.141).aspx
Note: please pay attention to Prerequisites section, for example:
1. The specified Mailbox server must not already host a copy of the specified mailbox database.
2. The server hosting the specified database and the server that will host the database copy must both be in the same database availability group (DAG). The DAG must also have quorum and be healthy.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Similar Messages

Clone of auxillary database using rman with the source database unavailable

Hi,
Is it possible to clone a database with just the source database's backup pieces. The source database is currently unavailable. The source database backup was taken through rman - nocatalog mode. We have been provided the backup pieces. Any clues on how to go about it?

NAME TYPE VALUE
db_file_name_convert string /u34/oracle/data/FRD9, +DG_OAP
PST1/OAPPST1/DATAFILE, /u34a/o
racle/data/FRD9, +DG_OAPPST1/O
APPST1/DATAFILE, /u35/oracle/d
ata/FRD9, +DG_OAPPST1/OAPPST1/
DATAFILE, /u36/oracle/data/FRD
9, +DG_OAPPST1/OAPPST1/DATAFIL
E, /u37/oracle/data/FRD9, +DG_
OAPPST1/OAPPST1/DATAFILE, /u38
/oracle/data/FRD9, +DG_OAPPST1
/OAPPST1/DATAFILE, /u39/oracle
NAME TYPE VALUE
/data/FRD9, +DG_OAPPST1/OAPPST
1/DATAFILE, /u40/oracle/data/F
RD9, +DG_OAPPST1/OAPPST1/DATAF
ILE
log_file_name_convert string /u32/oracle/data/FRD9, +DG_
OAPPST1_AUX1/OAPPST1/ONLINELOG
SQL>

How to create a service order and check the internal order in R/3

Required Solution:
1. How to copy existing service order and create new one and check the internal order in R/3, whether the certain service order is correctly created in r/3, can you polease explain the steps plz.
2. If i am creating service order by service template finally the service order is getting created but it is not showing me in the table iaom_crm_aufk, how to check this.
can any one help me in this issues as soon as possible.

Hello Zita,
Try to restart your portal after creating ServiceUser in both UME and KM.
One more major difference between ServiceUser and normal portal user is that a ServiceUser does not have a UserAccount (IUserAccount)
Object serviceContext = null;
 try {
 serviceContext = AccessController.doPrivileged(new PrivilegedExceptionAction() {
 public Object run() throws WcmException {
 return ResourceFactory.getInstance().getServiceContext(CONTRACT_SERVICE_USER);
 } catch (PrivilegedActionException e) {
 logger.severe(e, "ResourceContext for the technical " + serviceUser +
 " user could not be retrieved.");
IResourceContext resCtx = (IResourceContext) serviceContext;
So I modify all KM resources with this resCtx.
Hope this helps ...
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

How to create a new workspace and change the name of the existing

Hi,
can any one help me how to create a new workspace in application express 3.1 on XE DB and how to change the name of a existing workspace.
thanks
Jana

Jana,
This is discussed at length in the User's Guide. See the section "Creating Workspaces".
To rename a workspace using the admin application, edit the workspace attributes and type a new name in the field where the old name appears, then Apply Changes.
Scott

How to Create a default domain and deploy the application in jdeveloper using a script or code (not manually)

Hi ,
I have installed Jdev using silent installation .
Now I have some apps already created I want to create a default domain and then deploy apps into that through ant or any script?
Can anyone help me on this?
Thanks and Regards,
Vivek Pemawat

We still don't know what you want to archive with here.
Cvele_new_account got you a pointer on how to install the DefaultDomain.
Tip: if you want to know or see the exact command line jdev uses to install the DefaultDomain, open jdev and in the application server navigator right click on hte integrated server and select configure DefualtDomain. In the log window you see the command line with all parameters.
Timo

Can you setup CDC on Replicated Database and not the source database

I just want to confirm the following:
Can you setup Change Data Capture on the replicated database. (SQL 2008 R2, SQL 2012)
To be clear CDC will not be setup on the source server database, it will only be setup on the replicated database.
Everything I've read so far says you can but there are pit falls and probably is not a good idea.
What are the pros and cons?
What is best practice.

Yes, you can.
Have you seen this article?
http://blogs.msdn.com/b/repltalk/archive/2010/04/19/change-data-capture-best-practices.aspx
I use replication all the way. You can replicate to a different table of a different schema in the same database. In most cases where people do cdc I find that they can use replication to achieve the same goals.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

How to create context sensitive help and call the role based help from my Java Project?

Hello All,
I am new to Robo Help. I have created a Robo help for my Java Web Applicaion. My application is role base i.e some user's will not see some of the pages of the application. So I want to hide those pages in Robo help as well. I tried creating multiple TOC for different Roles.
My Question is
How to call robo Help from my application?(I will be calling using java script. If it is with RoboHelp_CSH.js where can I get that and How to implement it in my project)
How to implement role based help?
Thanks,
Siva.

I answered that. My point in asking whether it matters was that if it does, then you cannot use content categories and point different users to different categories and not allow them to see the others.
The alternative, as I said, would be to produce different outputs for each role.
As it does matter, then using webhelp you will have to use your RoboHelp project to produce a number of outputs, one for each category. Your app would install each webhelp into different folders and when your app determines the user role, you will link to the appropriate help.
There is another thread running where it has been explained by Willam van Weelden that you can achieve what you want using browser based AIR help. If that form of help can be considered, then the thread is at http://forums.adobe.com/message/4914753?tstart=0#4914753
Browser based AIR help must be run from a web server. It cannot be installed locally.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to creat a Business System and Tech System in SLD for the DB2 DataBase?

Hi,
How to creat a Business System and Tech System in SLD for the DB2 DataBase?
Joseph

Hi,
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Go Through this links..
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
Also try elearning.
https://www.sdn.sap.com/irj/sdn/elearn
Thanks,
Satya Kumar

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

We have too many apple devices, how can I creat another apple ID and divide the devices among 2 Apple Ids?

Hello all,
We started off with the original iPhone a few years ago and now between my wife and I (plus Kids) we have too many apple devices under the same apple-ID (2 X iPhone 6+, 2X macbook Pro, 2X iPod-touch and 1X iPad)
We are constantly running into issues because everyone in the house is using the same apple id, downloading Apps using the same ID, sharing the same cloud and receiving each other's iMessages.
I know that I can create another Apple-ID, what I am unclear on is once I do have a new apple ID, how do I assign that to half the devices (1X iPhone 6+, 1 X MBP and 1 Ipad)
Please respond if you are able to help.
Thank you

I'm not sure what they told your at the Apple store, but each Apple ID can only create a single iCloud account. If you want separate accounts for all these devices, they will have to be created using separate IDs. Note: you can do this and still share the same ID for other services such as your iTunes store account. The iCloud ID does not need to be the same as the ID used for other services.
To create an account, go to Settings>iCloud and sign in with a different Apple ID. If you want to migrate a copy of the current iCloud data to the different accounts, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; the devices keeping the current account will not be effected by this), provide the password to turn off Find My iDevice and choose Keep on My iDevice when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.

How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How do I make and keep a copy of a photo in iPhoto so that I can edit the copy and keep the unedited original?

How do I make and keep a copy of a photo in iPhoto (version 9.5.1) so that I can edit the copy and keep the unedited original?

You don't have to. iPhoto does that automatically. Note the command in Photos menu to 'Revert to Original' and the original can be exported at any time using the Export command.
Longer answer:
All edits in iPhoto are virtual. The database records your decisions and then applies them to a copy of the original. So your original is untouched. Your edited version is never "fixed" until you export it.

How to create a new Characteristic and Key figure ?

Hi !
I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

Hi,
Instead of RSA1, use RSD1 to create Characteristics & Key figure.
1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
2. Enter name of the same & click on create transaction.
3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
4. always copy new key fig. or characteristics from standard.
5. after creation activate the key figure.
Hope this steps will help you to create Char. & key fig.
Regards
Sujay

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

How to Create a database copy and specify the source database.

Similar Messages

Maybe you are looking for