How to create a database table for educational details

how to create table for this image. i have to develop a job portal website. i created all the tables that required. but i dont know how to store these fields in table. any one help me plz

It would need following tables
1. Employee table where EMpNo field would be included as an attribute. Other fields would be EmployeeName,Designation, ...
It will have Primary Key as EmpID
2. QualificationType table with QualificationCategoryID and QualificationCategory with values Highest Qualification Post Graduate etc
QualificationCategoryID is the primary key
3. QUalificationTypeAttributes tables with fields as QUalificationTypeAttributeID,QUalificationTypeAttributeName
QUalificationTypeAttributeID is primary key
and QUalificationTypeAttributeName will have values Institute Name, Qualification Category etc
4. EmpQualificationTypeValues table with fields
QUalificationTypeValueID, QUalificationTypeAttributeID , QualificationCategoryID , EmpID, Value
QUalificationTypeValueID would be the primary key
for above case values would be like below
Employee
Emp ID EmpNo Name ...
ID1 12345 xxxxxxx
QualificationType
QualificationCategoryID QualificationCategory
CatID1 HIghest Qualification
CatID2 Post Graduate
QUalificationTypeAttributes
QUalificationTypeAttributeID QUalificationTypeAttributeName
QTAID1 Institute Name
QTAID2 Qualification Category
QTAID3 Year Of Passing
QualificationTypeValues
QUalificationTypeValueID QUalificationTypeAttributeID QualificationCategoryID EmpID Value
QTVID1 QTAID1 CatID1 ID1 Your institute Value set from screen for highest qualification
QTVID2 QTAID2 CatID1 ID1 Your qualification category Value set from screen for highest qualification
QTVID3 QTAID3 CatID1 ID1 Your year of passing value set for highest qualification
QTVID4 QTAID1 CatID2 ID1 Your institute Value set from screen for post graduate
QTVID5 QTAID2 CatID2 ID1 Your qualification category Value set from screen for post graduate
QTVID6 QTAID3 CatID2 ID1 Your year of passing value set for post graduate.....
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

How to create one master table and two detail for it

I have one table , imagine it like mastertable( empid,deptid );
and two different tables like employeetable(empid ) , departmenttable ( deptid )....
I dont have any relation on database side. I need to create view link and ı need to use only one master table for two detail tables.
How can ı manage this scenerio ?
thanks...

yes Shay ı really want to use two detail table in one UI as you suggest in your blog. But in that scenerio probably tables have link in database side with foreign key. My detail tables dont have any connection in database side with my master table. How can ı link them under one mastertableVO ?
I am really sorry about my bad explanation. I am a newbie and probably ı dont know the correct words to tell my problem.
Thanks for your time...

How to create a database table at runtime

Hai all,
i have a table control having the field names as rows, when i select the rows (not all) i want to create a database table( not internal table ) in the background and for that table table maintainence generator also (in abap don;t tell in OOPS Concepts ).
please help on the above issue it's very urgent.
Regards
Lucky

You cn use the <b>FM DD_CREATE_TABLE</b> to achieve the same.
Here it is with example code
FM DD_CREATE_TABLE
Or using Native SQL,
When execute native SQL....
Regards
Kathirvel

How to trace the database table for a structure

hi
am trying to find the database table for a structure unfortunately am failing to use the sql tracer any one know howelse i can do that the structure name is 'busbankcheck' and 'bus000flds'.
thanx in advance

Hi florence,
1) U can go to tcode sldb and give ur structure name or if u can find which logical database it is from u can get the tables of the structure....
Suppose it is of HR it may be like pnp logical database and then to sldb and give pnp and u can get all the table of that....
2)If u know which fields u want from the stucture....then go to table DD03L and give ur fields name and it iwll bring where all tables this field is avaialble and u can find them......
3) the st05 sql trace can help u.....
I hope any one of the three will definetely help uuu
Regards
vamsi
Edited by: vamsi talluri on Jan 22, 2009 1:24 PM

Problem occured when create a tree table for master-detail view objects using SQL queries?

I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK,
        sum(
         case when cntr_list.cntr_size_q = '20'
              then cntr_list.cntr_qty
              else 0 end ) as cntr20 ,
        sum(
         case when cntr_list.cntr_size_q = '40'
              then cntr_list.cntr_qty
              else 0 end ) as cntr40 ,
         sum(
         case when cntr_list.cntr_size_q = '45'
              then cntr_list.cntr_qty
              else 0 end ) as cntr45
FROM (
    SELECT yb1.BLOCK_M as SOURCE_BLOCK,
           scn.CNTR_SIZE_Q,
           count(scn.CNTR_SIZE_Q) AS cntr_qty
    FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
    WHERE
    scm.cmr_n = scn.cmr_n
    AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
    OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
    AND scm.shift_mode_c = :ShiftModeCode
    AND scm.end_terminal_c = :TerminalCode
    AND scm.start_terminal_c = yb1.terminal_c
    AND scm.start_block_n = yb1.block_n
    AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
    AND scm.end_terminal_c = yb2.terminal_c
    AND scm.end_block_n = yb2.block_n
    AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
    AND scn.status_c not in (1, 11)
    AND scn.shift_type_c = 'V'
    AND scn.source_c = 'S'
    GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK
2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,
        sum(
         case when cntr_list.cntr_size_q = '20'
              then cntr_list.cntr_qty
              else 0 end ) as cntr20 ,
        sum(
         case when cntr_list.cntr_size_q = '40'
              then cntr_list.cntr_qty
              else 0 end ) as cntr40 ,
         sum(
         case when cntr_list.cntr_size_q = '45'
              then cntr_list.cntr_qty
              else 0 end ) as cntr45
FROM (
    SELECT yb1.BLOCK_M as SOURCE_BLOCK,
           yb2.BLOCK_M as END_BLOCK,
           scn.CNTR_SIZE_Q,
           count(scn.CNTR_SIZE_Q) AS cntr_qty
    FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
    WHERE
    scm.cmr_n = scn.cmr_n
    AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
    OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
    AND scm.shift_mode_c = :ShiftModeCode
    AND scm.end_terminal_c = :TerminalCode
    AND scm.start_terminal_c = yb1.terminal_c
    AND scm.start_block_n = yb1.block_n
    AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
    AND scm.end_terminal_c = yb2.terminal_c
    AND scm.end_block_n = yb2.block_n
    AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
    AND scn.status_c not in (1, 11)
    AND scn.shift_type_c = 'V'
    AND scn.source_c = 'S'
    GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
3. I create a view link to create master-detail relationship for these 2 view objects.
masterview.SourceBlock (1)->detailview.SourceBlock (*).
4. I create a tree table using these 2 view objects with master-detail relationship.
When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
Managed Bean:
        DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
        ViewObject vo = dc.getViewObject();
        System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
        System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
        vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
        vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
        vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
        vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
        vo.executeQuery();
        System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
        DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
        ViewObject vo1 = dc1.getViewObject();
        System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
        System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
        vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
        vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
        vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
        vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
        vo1.executeQuery();
        System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
5. What's wrong in my implementation? I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.

Hi Frank,
Thank you and it can work.
public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
                                                                          Number highSalary) {
        Row r = getCurrentRow();
        if (r != null) {
            RowSet rs = (RowSet)r.getAttribute("EmpView");
            if (rs != null) {
                ViewObject accessorVO = rs.getViewObject();
                accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
                accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
            executeQuery();
but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and I have to change current row manually like below.
any idea?
            DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
            ViewObject vo = dc.getViewObject();
            vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
            vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
            vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
            vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
            vo.executeQuery();
            vo.setCurrentRowAtRangeIndex(0);
            ((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues();

How to find the database table for this screen field

hi in XD02
There is a scrren field customer
name1 (firt line under name)
and email id fields
i wnat to know where the data stores goes w hen user eners in this screen i mean in which table and how to find it
for kunnr name1 i suppose it goes to kna1 but how to find it?
and f or email id whre it gots which table
regards
Arora

Hi,
when you press F1 it will give the necessary information
but some times it may give the structure names also
those structures are being used by the back end module pool
programm
so every time we can get the exact information about the
data type or length
but not sure that every time we get the exact database table name
and field name
according to me, if i dont know where some field are getting stored in
database ( if the field name and table is structure )
then i will ask my functional consultant ...
thanks & regards,
Venkatesh

How to create a database trigger for automatic run statspack.snap

Hi,
I want to create a database trigger to run statspack.snap at startup.
connect /as sysdba
grant create any trigger to perfstat;
connect perfstat/perfstat
create or replace trigger auto_snap
after startup on database
begin
statspack.snap;
end;
after startup on database
error at line 2:
ora-01031: insufficient privileges
connect /as sysdba
create or replace trigger perfstat.auto_snap
after startup on database
begin
statspack.snap;
end;
Trigger created.
after shutdown and startup the database, the trigger has not been run. (no statspack snapshot)
What I have done wrong?

981145 wrote:
hi... I have created a database link but it is showing some error. Can you please tell me, do we have to update the details in TNSNAMES.ora file regarding the database which i am creating now before creating database link?????
awaiting for your response,
Thanks in advanceI'm sorry, but "showing some error" is NOT an actionable error message. Why do you think we can solve your error if you don't tell us what the error is?
Yes you will need to adjust your tnsnames. When a process in a database_A accesses database_B via a dblink in database_A, the database_A is acting as a client to database_B. At that point database_A is just like sqlplus or sqldeveloper, and all tns considerations are the same.

How to know the database tables for 0CUST_SALES_LKDH_HIER

Is there any way to find out the underlying data base tables for "0CUST_SALES_LKDH_HIER"?
In general where should I should go to check the underlying data base tables.

Table - KNVH - Customer Hierarchies
Easy ways first check for the datasources at http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
If that really doesn't help you have to have a look at this Excellent blog by Roberto Negro : /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins

How to create a magnifying glass for image details

hello,
i am displaying an image with high resolution,so that the image on the screen has not the real resolution.
to look at details i want to move the mousepointer over the image and in an area under the mousepointer there should
appear the related part of the image with original high resolution,like a magnifying glass.
so what can be a solution for this?
thanks axel

Hi
I have created a sample here with Flex for
magnifying glass in flex:
http://devsachinonflex.blogspot.com/2010/04/magnifying-glass-in-flex.html Sachin dev tripathi
Flex Developer

BI Publisher creating two database connection for scheduler configurations

Hi ,
please tell me how to create two database connection for scheduler configurations in BI Publisher
ADMIN -> scheduler configurations
Kind Regards,
Mohan

Hi Saichand,
thank you for your Kind reply !!!!
Already i configured the scheduler configuration(DB) details for project1.Now i want to configure one more scheduler configuration(DB) for project2.
i want to maintain two scheduler config details for two DB.
Kind regards,
Mohan

How to access the Microsoft Dynamics database tables for creating a DW

Hi all,
I m trying to build a POC for the manufacturing industry (Dairy Industry).
Hence I'm trying to install Microsoft Dynamics and access the tables available its OLTP and create a warehouse.
Please let me know how we access the database tables of Microsoft Dynamics to do etl (using any etl tool).
Then i would be creating reports and dashboard using OBIEE 11G.
I thought of getting help before installing microsoft dynamics so that i can install the necessary components to achieve the same.
Please let me know the necessary things i would need to do.
Thanks
Jaan

Hi,
I think this can be possible with microsoft ssis etl tool.
Thanks,
Navin Kumar Bolla

How to create a database for sample code from Tutorial/Book?

I want to try out the sample code from [http://shop.oreilly.com/product/0636920013471.do] for the book SQL Pocket Guide 3rd Ed.
I have downloaded the oracle vm/appliance for oracle 11g2 and I have started sqlplus as sysdba.
I'm feeling overwhelmed with these links describing how to create a database:
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
[http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html]
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
(1) What is the command to list the existing databases?
(2) What is the command to delete an existing database?
(3) When creating a new database with the create database command, is it necessary to specify the logfile, character set, national character set, datafile, sysaux datafile, undo tablespace, temp table space? Do these have reasonable defaults? I'm not sure what proper directories are to specify for Linux and the examples are for windows.
Can someone give me a simplified create database command to create a database called 3rdEdPocketGuide? Should I follow the example at [http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html] and instead of orcl use 3rdEdPocketGuide?
(4) What command do I use to execute the script that comes with the book SQL Pocket Guide 3rd Ed? This is the script that has all the drop table, create table and insert commands in it.
(5) What command do I use in sqlplus to set the current default database prior to running this script? Perhaps this is the connect command? I don't want my script to create tables in the system database.
(6) I tried the command "connect 3rdEdPocketGuide" and it prompted for a password! Yikes! What password? Do I need to specify a password when I create a database? I cannot tell if I have successfully created such a database or it is just prompting me for a password to thwart malicious users. Is it is possible to create databases which don't require a password or maybe a zero length password?
Thanks
Siegfried
Edited by: user8816970 on Sep 26, 2012 12:01 PM
Edited by: user8816970 on Sep 26, 2012 12:18 PM

user8816970 wrote:
Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.
Thanks!
Siegfried
>Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
above does NOT use SQL*Net to connect to the instance
>
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.SQL Developer can only connect to the instance via SQL*Net
>
Thanks!
Siegfrieda database in SQL Server is same as schema/user in Oracle

How to Create a Dump file for a MaxDB database

Hi
I have to create a dump file for a database in MaxDB.
IN MaxDB How to Create a DataBase and How to Connect to
MaxDB.

Hi,
what exactly do you mean with a 'dump file'? Are you referring to a backup?
You should be able to find your answers here: http://dev.mysql.com/doc/maxdb/maxdb_faq.html.
If not, please let me know.
Regards,
Roland

How to create 2 char infoobjects for single table

Hi Friends,
Please help me how to create two chacteristics infoobjects for a single table.... Thanx in advance

Hi,
If i understand your question right, you want one table (SID) to be shared between two info objects. It is possible if one info object uses the other info object as its reference.
Create a reference info object.
-Vikram

How to create an rss feed for a database application page

Hi
I need to create a web service for an apex application page so that it can be utilized and hosted another server of apex. For that we thought of creating an rss feed for that application page.
Please help me out how to create an rss feed for an apex page.
Thanks in advance.
Regards
Sandeep Artham

Hi,
This might help
http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/advnc_web_services.htm#sthref2628
Also Blog posts
http://tylermuth.wordpress.com/2008/01/22/producing-rss-from-plsql/
http://richmurnane.blogspot.com/2010/03/oracle-apex-creating-simple-rss-feed.html
http://www.apex-blog.nl/node/8
Regards,
Jari

How to create a database table for educational details

Similar Messages

Maybe you are looking for