How to create a dialog for use by an Excel AddIn?

I know the basics of Excel AddIns, but have no idea how to design, implement and later display an internal dialog.
The "Smart Quote Paste" function below is done, and it does not need any parameters. The function corresponding to the "New Project" button, however, needs to create a number of spreadsheets, provided by the user.
TIA.

Hello Travis,
For example:
const string message =
"Are you sure that you would like to close the form?";
const string caption = "Form Closing";
var result = MessageBox.Show(message, caption,
MessageBoxButtons.YesNo,
MessageBoxIcon.Question);
// If the no button was pressed ...
if (result == DialogResult.No)
// cancel the closure of the form.
e.Cancel = true;
If you want to customize it on your own, you can add a new Windows Form to the project and then add the required controls. After creating an instance of the form in the code you may show it using the Show or ShowDialog methods.

Similar Messages

  • How to create SDA file for using AXIS Framework in the SOAP Adapter

    Hi experts,
    I have the following question:
    How I can create the SDA file aii_af_axisprovider.sda for using the AXIS Framework in the SOAP Adpater described in http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm ?
    I have downloaded the files axis.jar, commons-discovery-0.2.jar, commons-logging-1.0.4.jar, commons-net-1.0.0-dev.jar and wsdl4j-1.5.1.jar. But how to create the SDA file aii_af_axisprovider.sda? Which tool I have to use for this? It is enough to compress these 5 jar-files in the sda file or need I further files with further information (meta information etc.)?
    Thanks and best regards
    Christopher

    Hi Christopher,
        Check this discussion if you have not checked already.
    Re: NTLM Authentication dosent work with XI ?
    Regards,
    Ravi

  • How to create a BOM for use in purchasing

    Hello Experts
    We are a University, and I have been asked to create something similar to a bill of material for using on a purchase order.
    We purchase light bulbs from a supplier, but each bulb also incurs a 15p disposal charge and this charge has to be shown as a separate line item on the purchase order.  So we want to create a material that when used pulls through an additional line for the disposal charge.  Also the light bulbs are held in stock and are issued out to departments, therefore the cost of the light bulb and disposal charge must be charged out too.
    Thanks

    HI,
    Bills of material are best used when there are components that are relevant. They CAN be used for things like you mention here but I am not sure that it will help your business requirements.
    I would suggest that you consider adding the charge as a new pricing condition.
    That way the total cost of the item will be the price plus the disposal charge. If you use a separate line on the PO the cost of the disposal will not be connected to the cost of the bulb and so when you issue any they will use the cost without the disposal charge.
    SO I would create an info record and enter the details of the price and then add in a surcharge condition type (for the disposal cost).
    That ay whenever you order these bulbs from this vendor, the system will propose the cost including the disposal cost.
    Steve B

  • HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

    iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.  I've seen reference to the  "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app.  I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for.  I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air.  Any help would be greatly appreciated.

    If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

  • How to create Presentation variable for columns and to use it in Narrative?

    Hi All,
    Anybody know how to create presentation variable for a column (i.e., i need to create it in edit formula section itself). And then, I should use it in Narrative section to display that column value. Is it possible? Or do i need to use any other variable for this requirement? If so please let me know, how to create it? This is very urgent requirement.
    Thanks in Advance
    Thenmozhi

    Hi Satya,
    I just want to create a table that should horizontally display the values like below:
         SUID Tag # :123456               Year Mfg: 2007                                                                                     
         Description: computer corporation FA ID#: 4576
         Model Number: 4569 hESC: #ert
         Serial Number: 78945 Flags: c
    Department: Hematology
    User: thenmozhi
    Database: OLAP
    I think we can create this type of report using either Narrative or Static Text. But I am not sure whether it is possible or not? And also another thing is that sectioning is applied for SUID Tag # column. So, depending on the dashboard prompt if the SUID Tag # retrieves two or more values.
    Then the first value for example 123456     and the values for the other columns related to this SUID Tag # value should display in the first page (i.e., page 1). And if the next value of the SUID Tag # for example say 678901 then the values should move to second page that is like this:
         SUID Tag # :678901               Year Mfg: 2008                                                                                     
         Description: Computer Manufacturing FA ID#: 4577
         Model Number: 4570 hESC: #eth
         Serial Number: 78946 Flags: G
    Department: Hematology
    User: Rehman
    Database: OLAP
    Thanks
    Thenmozhi

  • How to create an instance for RemoteSession without using create() method

    How to create an instance for RemoteSession without using create() method?

    What's RemoteSession? Not in the JDK. And does the question have anything to do with concurrency?

  • How to create transport request for standard text created using SO10.

    Hi,
    How to create transport request for standard text created using SO10?
    Regards
    Ramakrishna L

    Hi,
    For the Standard text created in SO10,
    please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
    Double click on ADRS or ST or what ever your type of text->
    Enter your standard text name
    Click on transport button->SHIFT+f6-> It will ask you for a transport request.
    Best regards,
    Siva

  • How to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

    how to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

    my problem solve by me
    first create apple id
    fill credit card details
    and complete your account creating  process.
    than go to app store or itune store
    login your acount
    click right side  - account button
    than again login for account setting
    next go to payment information and click edit button
    when u enter payment infomation
    click none button in payment method and click done button.
    than ur credit card has been removed.
    but rs. 60 will deducted in your account when u doing this process.

  • How to create volume slider for flash cs 5 using action script 2.0?

    how to create volume slider for flash cs 5 using action script 2.0?the output should like if user want to hear sound in slow pitch,medium pitch or high pitch(slow to high pitch anything).i have attach this sound to button with using this code:
    stop();
    mySoundBtn.onRelease = function () {
              mySoundC = new Sound(this);
              mySoundC.attachSound("mySoundClip");
              mySoundC.start(0, 10);  //10 represents the number of loops
              gotoAndPlay(2);
    This sound plays till 3-4 scene ahead.
    Can anyone help me?

    Hey thnx Ned.
    this sites are really helpful.but,i have used sound through button.so how it is possible to attavh the link with slider.i have created slider also.
    Below is my slider code for sound.
    onClipEvent (load) {
        mySound1 = new Sound();
        mySound1.loadSound((myScale)+"/"+(myTanpura)+"/"+(myTanpuraSwar)+"/"+(myTanpuraTempo)+".w av", true);
        mySound1.onSoundComplete = function() {
        mySound1.start();
        mySound1.start(0.058,999);
    onClipEvent (enterFrame) {
        downloaded = mySound1.getBytesLoaded();
        total = mySound1.getBytesTotal();
        if (downloaded != total) {
            _root.dl = "You have to buy this software...";
        } else {
            complete = 1;
            _root.dl = "";
        mySound1.setVolume(ratio * 2);
    This code is working for slider.I mean it scrolls the slider.but it dosent make any effect to sound.
    Below is my button code.
    stop();
    mySoundBtn4.onRelease = function () {
              mySoundC = new Sound(this);
              mySoundC.attachSound("mySoundClip4");
              mySoundC.start(0, 300);  //10 represents the number of loops
              gotoAndPlay("play1");
    this is on button's frame.not exactly on button.
    Button and Slider both are on diffrent scene.
    Can you plese help me out?

  • How to create an Invoice for the sales order using the T-Code VF01

    Hello Experts,
    How to create an Invoice for a sales order using the T-Code VF01?
    Thanks in advace,
    Suma

    hi,
    Make the following settings-
    1. Create sales document and billing type
    2. assign billing type in sales document type config VOV8
    3. Activate itemcategory as sales order related billing
    4. Maintain copy control header and item level between sales order and billing
    5. Maintain pricing procedure for sales order and billing
    6. Define Output procedure in case to print invoice
    Regards
    Goutham

  • How to create an dialog "SAPoffice express info" in ABAP?

    Hi all,
    We would like to create a dialog "SAPoffice express info" to remind the relevant user that he must immediately check his new SAP mail in inbox.
    We see SAP system sometimes send a dialog "SAPoffice express inof" for this same purpose. For example:
    "Express document "Cannot be sent: Send Mail from ABAP Program." received from author "SAPUSER"".
    So we would like to create a dialog "SAPoffice express info" for our cas.
    If anyone know how to create a dialog "SAPoffice express info" in ABAP, please help us?
    Thanks a lot,
    Vinh vo

    Try with function module  SO_NEW_DOCUMENT_SEND_API1. using this you can send express message to sap office.
    RECEIVERS-REC_TYPE = 'B'
    RECEIVERS-REC_ID       = (user id)  " SAP user id for whom you want to send
    RECEIVERS-EXPRESS    'X'        
    a®

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to create a substitute for requester in SRM 7.0

    Hi,
    do you know how to create a substitute for requester?
    we have groups of 2 people and we want that they can see and edit shopping carts one of each other. Do you know how is it possible? it will be necessary for all SCs.
    Thanks.
    Regards,
    Nelson

    You can use the "Team Cart" feature introduced in SRM 7 for your requirement.
    Take a look at this wiki page for more information http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
    Edited by: Jay Yang on Mar 31, 2011 10:47 AM

  • How to create the sales order using BAPI's ....?

    Hi Guru's,
    could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically  i don't have basic knowledge on this....please provide required inputs ....:)
    thanks in advance
    Srinivas......

    Hi Guru's thanks for your inouts and your valuble time...
    please find the program logic below...
    *& Report  ZAREPAS30
    REPORT  zarepas30.
    DATA : gs_vbeln                   TYPE  vbak-vbeln,
           gs_order_header_in         TYPE  bapisdhd1,
           gs_order_header_inx        TYPE  bapisdhd1x,
           gt_order_items_in          TYPE  STANDARD TABLE OF bapisditm,
           gwa_itab1                  TYPE  bapisditm,
           gt_order_items_inx         TYPE  STANDARD TABLE OF bapisditmx,
           gwa_itab2                  TYPE  bapisditmx,
           gt_order_partners          TYPE  STANDARD TABLE OF bapiparnr,
           gwa_itab3                  TYPE  bapiparnr,
           gt_return                  TYPE  STANDARD TABLE OF bapiret2,
           gwa_itab4                  TYPE  bapiret2.
    Sales document type
      PARAMETERS: p_auart TYPE auart OBLIGATORY.
    Sales organization
      PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
    Distribution channel
      PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
    Division.
      PARAMETERS: p_spart TYPE spart OBLIGATORY.
    Requested Delivery Date
      PARAMETERS: p_edatu  TYPE edatu OBLIGATORY.
    Sold-to
      PARAMETERS: p_sold  TYPE kunnr OBLIGATORY.
    Ship-to
      PARAMETERS: p_ship  TYPE kunnr OBLIGATORY.
    Material
      PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
    Quantity.
      PARAMETERS: p_menge TYPE kwmeng  OBLIGATORY.
    Plant
      PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
    Start-of-selection.
      START-OF-SELECTION.
    Header data
    Sales document type
      gs_order_header_in-doc_type = p_auart.
      gs_order_header_inx-doc_type = 'X'.
    Sales organization
      gs_order_header_in-sales_org = p_vkorg.
      gs_order_header_inx-sales_org = 'X'.
    Distribution channel
      gs_order_header_in-distr_chan  = p_vtweg.
      gs_order_header_inx-distr_chan = 'X'.
    Division
      gs_order_header_in-division = p_spart.
      gs_order_header_inx-division = 'X'.
    Reguested Delivery Date
      gs_order_header_in-req_date_h = p_edatu.
      gs_order_header_inx-req_date_h = 'X'.
      gs_order_header_inx-updateflag = 'I'.
    Partner data
    Sold to
      gwa_itab3-partn_role = 'AG'.
      gwa_itab3-partn_numb = p_sold.
      APPEND gwa_itab3 TO  gt_order_partners .
    ship to
      gwa_itab3-partn_role = 'WE'.
      gwa_itab3-partn_numb = p_ship.
      APPEND gwa_itab3 TO  gt_order_partners .
    ITEM DATA
      gwa_itab2-updateflag = 'I'.
    Line item number.
      gwa_itab1-itm_number = '000010'.
      gwa_itab2-itm_number = 'X'.
    Material
      gwa_itab1-material = p_matnr.
      gwa_itab2-material = 'X'.
    Plant
      gwa_itab1-plant    = p_plant.
      gwa_itab2-plant   = 'X'.
    Quantity
      gwa_itab1-target_qty = p_menge.
      gwa_itab2-target_qty = 'X'.
      APPEND gwa_itab1 TO gt_order_items_in.
      APPEND gwa_itab2 TO gt_order_items_inx.
    Line item number.
      gwa_itab1-itm_number = '000020'.
      gwa_itab2-itm_number = 'X'.
    Material
      gwa_itab1-material = p_matnr.
      gwa_itab2-material = 'X'.
    Plant
      gwa_itab1-plant    = p_plant.
      gwa_itab2-plant   = 'X'.
    Quantity
      gwa_itab1-target_qty = p_menge.
      gwa_itab2-target_qty = 'X'.
      APPEND gwa_itab1 TO gt_order_items_in.
      APPEND gwa_itab2 TO gt_order_items_inx.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
      EXPORTING
        order_header_in               = gs_order_header_in
        ORDER_HEADER_INX              = gs_order_header_inx
      IMPORTING
        SALESDOCUMENT                 = gs_vbeln
      tables
        RETURN                        = gt_return
        ORDER_ITEMS_IN                = gt_order_items_in
        ORDER_ITEMS_INX               = gt_order_items_inx
        order_partners                = gt_order_partners.
    Check the return table.
      LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      IF sy-subrc = 0.
        WRITE: / 'Error occured while creating sales order '.
      ELSE.
    Commit the work.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        WRITE: / 'Document ', gs_vbeln, ' created'.
      ENDIF.

  • How to create business operation for starting workflows

    How to create business operation for starting workflows from worklist?
    When I call methods that implements business operation from java class everything
    works fine(wlpi-ejb.jar is required), but when I call business operation from
    Studio I can't use classes from wlpi-ejb.jar.

    Business operation is called by WLIS. So, I include wlpi-ejb.jar into WLIS classpath.
    Studio uses deployed EJB from wlpi-*.jar, I don't know why Studio doesn't see
    methods from deployed EJBs when WLIS classpath contains wlpi-ejb.jar.
    "Andrew Pitonyak" <[email protected]> wrote:
    >
    When studio starts, what is your classpath? If you use the included batch
    file to start it, then your class path may not include this :-)
    Andrew
    "Raul" <[email protected]> wrote in message
    news:[email protected]..
    How to create business operation for starting workflows from worklist?
    When I call methods that implements business operation from java classeverything
    works fine(wlpi-ejb.jar is required), but when I call business operationfrom
    Studio I can't use classes from wlpi-ejb.jar.

Maybe you are looking for