How to create a DLL for LabVIEW in MatLab

I want to use MatLab-Code from an M-file in LabView without MatLab. So i decide to use external code in a DLL. Can anybody give me some hints - how to do? (How to create, how to use?)
Used System Windows 98, LabVIEW 6.1, MatLab 6.1 R12.1
Thanks

Hi,
I use Matlab-Code in Labview and it's don't need create a dll. The LV was a tool, matlab script, you can write your code Matlab here. see the examples of LV.I think the lV 6.1 have.
Dll it's very complicated

Similar Messages

How to create a dll in LabVIEW with a 2D array

I'm attempting to create a dll in LabVIEW with the following parameters from Test DLL.vi:
Inputs:
IN1 - Word
Buffer - 2D array of Unsigned Byte
Output:
OUT1 - Unsigned Byte
The prototype is constructed as follows in the Build Specifications of the Project:
uint8_t TestDLL(int16_t IN1, TD1Hdl *Buffer)
The dll builds successfully but when I attempt to use it in another VI (using the Call Library Function block) the prototype appears but it does not look like what was defined from the Build Specifications. Instead it looks like the following:
void TestDll(void );
I attached some screen shots of all the settings as described above.
Attachments:
Test DLL Front Panel.JPG ‏85 KB
DLL Prototype Before.JPG ‏84 KB
DLL Prototype After.JPG ‏54 KB

The Test DLL.vi is what I used to create dll prototype with in the Build Specifications in the project.
Note: There is no logic implemented yet.
Attachments:
Test DLL.vi ‏7 KB

How to build a dll for labview pda, which uses the intel ipp primitives in it

Hi all,
For my application, I need to call a c dll from Labview PDA, and in the c function i need to use intel IPP function. When i call my dll, i get an error saying the ippfunction i use, say "ippsCopy_16s missing c or vi file". Can someone tell me what I might be doing wrong?

Hi Vani,
When using a DLL in a PDA there are some special considerations you have to take. Please take a look at the following knowledgebase describing the process.
Eli S.
National Instruments
Applications Engineer

How to create a .DLL file from a .C file ?

Hi everybody
I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
thx
Attachments:
source.zip ‏37 KB

Hi sinaps,
You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
That being said,
If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
If you are using Visual C++: Look at the link that Al provided earlier.
MSDN: Walkthrough: Creating and Using a Dynamic Link Library
If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
Thanks!
Message Edited by Jervin_J on 03-14-2009 02:02 PM
Jervin Justin
NI TestStand Product Manager

Creating a DLL in LabVIEW containing a function using pointer to pointer

Hi!
I´m facing the problem to create a DLL from LabVIEW containing the following C-function:
functionF(structS** arrayA) ,
where:
structS is a struct of various data-types (e.g. int)
arrayA is an C-array of structS
How can this be done? Any ideas?
Thank you in advance for your support

This cannot be done in LabVIEW. LV doesn't have the data type "Pointer" as C has.
The only workaround I can think of is to use an array of strings in LV and in the interface define the parameter as "by reference". In LV you have to typecast the wire with the string to a cluster withthe layout of structS.
As far as I know an array of strings is represented as an array of pointer to strings. This is because strings are variable in length and therefore LV uses this method storing the pointers to the strings in the array and not the elements as usual.
You have to read the document about memory and data types of LabVIEW. In elder versions this was in the LabVIEW Bookshelf but I haven't found it in short in the newer version.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Creating a DLL in Labview 8.6 and calling it from Visual Basic 6.0

Dear friends,
I need to create a DLL in Labview 8.6 and call it from Visual Basic 6.0. The system works as follows:
I made an application using Labview 8.6 + Vision Assistant 8.6 where I can obtain the x,y coordinates of a template in an certain image being captured by an USB camera. The template coordinates change every time it moves and Visual Basic 6.0 must read these x,y values in real time. I found some information in the link http://zone.ni.com/devzone/cda/tut/p/id/3925, but it works for version 6.x of Labview and 8.6 version is different. Am I in the right path? If you have an updated tutorial like the one in the link above but for Labview 8.6 It would be very nice. Please help me.
Kind regards.
João Júnior

Hello Osvaldo,
I analysed the updated tutorial you sent me, but the thing is that it doen't show how to create the DLL in LV 8.6 but only show how to accessing the DLL from VB6. My problem is really HOW TO CREATE THE DLL IN LV8.6. In the link http://zone.ni.com/devzone/cda/tut/p/id/3063 there is detailed information about how to do this in LV6.x, the problem is that I don't find the path Tools»Build Application or Shared Library (DLL) in LV8.6, I think the procedure in LV8.6 is a little bit different. Don´t you have an updated tutorial on how to build a dll in LV8.6?How could you help me?
Kind regards.
João Júnior

Creating a DLL in labview that interacts with a DLL in C++

I’m creating a DLL in LabView that will interact with a DLL created in C++. I don’t have control in the C++ DLL.
Both DLLs would pass a big amount of data as strings between them, for that it is necessary to allocate memory to store information in one dll and read it in the other and viceversa. The first time I will call the other DLL, with this function :
long in texts ( unsigned char *name, void *id)
I would pass them a pointer pointer to an ASCII string (name) and a pointer to an unspecific data structure (id). The id would then be passed to me by his DLL whenever they use one of the functions implemented on my dll.
What I don’t know is what to pass as a void*id? What are they expecting? A number? A cluster?
The other thing I don’t know is how to allocate memory in labview and write there information, such as a string, and then tell the other DLL to look for the information at that DLL, and viceversa. I hope I made my self clear, hope somebody can help me, and please indicate me if you need more information

Hello Osvaldo,
I analysed the updated tutorial you sent me, but the thing is that it doen't show how to create the DLL in LV 8.6 but only show how to accessing the DLL from VB6. My problem is really HOW TO CREATE THE DLL IN LV8.6. In the link http://zone.ni.com/devzone/cda/tut/p/id/3063 there is detailed information about how to do this in LV6.x, the problem is that I don't find the path Tools»Build Application or Shared Library (DLL) in LV8.6, I think the procedure in LV8.6 is a little bit different. Don´t you have an updated tutorial on how to build a dll in LV8.6?How could you help me?
Kind regards.
João Júnior

Can I create a dll from labview with more that one function name

I know that when I create a dll from C and then call it in labview using the call library function node I can see the different functions on the configuration screen. Is there a way to create a dll in labview to have more than one function name? No matter how many functions happen in my VI it seems to build into a dll under the same function name requiring inputs for every function, can this be avoided somehow?
Thanks,
Dave

Each function corresponds to a separate VI. When creating the dll, on the Source Files tab of the app builder, click the Add Exported VI for each VI that you want. SubVIs of a main are not automatically exported and will not be available as separate function calls.

How to create a dll in Java?

I have written some code in Java to perform a certain function.
How can I create a dll for this code? Would I be able to call this dll from any platform?

Let me rephrase the question. I would like to create a dll for code that is written in Java.
Can you please tell me the procedure to do that?
I want to be able to call this dll from .Net framework or any other application. I found examples online to do the opposite using JNI.

Creating Activation code for LabVIEW Application Installer

Hi,
How could we create Activation code for LabVIEW Application Exe to restrict use to Single PC using LabVIEW settings/add-ons.
I think NI should provide in-built feature in Application Builder to generate activation code as required.
Regards,

Or just vote for this idea.
Try to take over the world!

How to create a macro for a planning type in MC8b transaction

Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishna

Dear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create one TO for multiple TRs

Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
balu

As for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

How to create one checksum for 264 vis

Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.

Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

How to create a DLL for LabVIEW in MatLab

Similar Messages

Maybe you are looking for