How to Create a Generic Delta Datasource

Hi All,
I have created a extractor thru RSO2 using a table.
The table consist of a time field which i set it to the timestamp field. After initlializing the delta upload successfully, when i run delta upload, no data has been uploaded even having made changes to some of the records.
Why is it so? Kindly advise.
Does the timestamp field have to be a datetime field or it can be any field of any data type?
Thanks in advance.

Hello Bill,
I have checked RSA7 and my datasource has the status of green. I have set the upper level to 900secs. After the init load, i waited for more than 900secs before i do another load but it still comes out as 0 records. Is there anything else i need to do?
I'd like to clarify one thing, is the timestamp field's data type suppose to be a decimal of length 15 field? Mine is currently a DEC15 field which is also a packed field. When i used F1 at the generic delta screen, it told me that the timestamp field should be a dec15 field. Is it correct?
Thanks, Bill!
Message was edited by: Shunhui Chua

Similar Messages

How to load a generic delta datasource.

I have created a generic delta datasource based on a table. I want to know how to load and monitor a generic datasource from very first step. That is how should i run and maintain delta transfer .

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33

How to create the generic extractors in sap R/3?,pabitra

Hi,
How to create the generic extractors in sap R/3?
Though it comes under cross application and the types of generic extractors are functional module ,db view,infoset query etc.Do u think the g.e can be built of one of the is types.plz tell correctly
Advance thanks
regards
pabitra

Hi,
this is for DB view ,
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
this is for infoset query,
http://help.sap.com/saphelp_nw04/helpdata/en/d2/cb43b2455611d189710000e8322d00/frameset.htm
Good day,
regards
Arun

How to create user in local datasource when UME is already switched to LDAP

HI,
Info : I have portal ( NW 700), recently i switched the datasource of portal to LDAP from local datasource.
issue: if i create user in portal it get created in LDAP, i want create few users in Local datasource.
how to create user in local datasource when UME is already switched to LDAP?
one solution is change the ume back to local datasource > create user > then switch back to LDAP.
do you know any other sol?
Regards
Shridhar Gowda

Please let me know the Datasource file name .. i.e. the .xml filename.
try to analyze this name and see whether you get a solution or post it here.
Reward points if helpful -

How to create a generic datasource from function module?

Dear experts,
I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
I have now some difficulties to continue:
In this function module, i get data from different transparent tables. Then i put these data into an internal table.
I just don't know what is the relatioin between the structure i defined and this internal table.
I should make "iTab structure AA" in the source code?
Thanks

Hi..
check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " XXXX " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
.Create a function group .
. Structure ZTXXXX
Create function module (i.e. ZTESTXXX) .
. Create the data source using transaction (RSO2).
. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter .
Test the datasource in R/3 using transaction RSA3.
Transfer the data source to BW System and replicate it in the BW-System.
Message was edited by:
shiv

How to create a Generic Object Services for a standard tcode.

Hi,
We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this audit train we have been asked to use "Generic Object Services" in transaction code ABAA.
Unfortunately, Generic object services are not available in this transaction code. Can you please suggest me how to create "Generic Object Services" for a particular standard transaction code. Also, we have show the details of custom workflow that follows the approval process in order to depreciate the asset. how to show this workflow details using Generic Services. This is a very critical issue, any help will be very help ful.
Please let me know should you require more information on this topic.
Thanks,
Ashish

Instead of copyg the std fm to z, do the following,
1. Go to se37 open FM VIEW_KURGV in display mode.
2. Click on the spiral icon on the top.
3. Then in menu go edit->enhancment options -> show implicit enhancement
4. """""""""""""""""""""" kind of lines will appear in the cde, just rt click on the line at the place u want to insert the code and select
enhancement implementation create.
5. Give apropriate name for thi , it will inset a n place to write your code.
This is an std sap methodology and is supported in upgradde also.

How to create a generic data extractor using standard function module

Hi,
I have to generate report based on Function module(standard FM),client know only Fm Name n they have given FM Name n asked reports based on that, so can any one give me steps to create DS based on that.
Thanks,
Swapna

check this blog
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
and this pdf:
Generik extraction: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
Generic delta:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Edited by: Aduri on Dec 17, 2007 4:04 PM

How to create a generic method?

Hi,
I am using a std task TS01200205 to create instance for a BOR object. There are 2 key fields. I want to pass these 2 to the ObjectKey field.
As for as I know, we have to concatenate these two Keyfields and assign it to 'Object Key' parameter.
How can I concatenate the 2 strings in my Workflow? Is there any std way of doing it?
Also what is a generic method? How to create it? Can I make use of generic method to achieve this?
Thanks,
Sivagami

If you want to use it in different workflows the best solution is probably to define an interface and define and implement the method there (a nice thing about BOR interfaces is that you can provide an implementation and not just the definition).
All you then need to do is let your object type(s) implement that interface, which only requires adding the interface since the implementation has been done already.
However, I am not saying this is a good way of approaching things, I'm just telling you how you can implement what you suggest.

How to create a generic with iMovie for iPad?

How do i create A generic with iMovie for iPad?

luckyuis wrote:
Hi All,
> I have generated a report showing data for past 12 months and after that i need to include a chart showing Month on X axis with data for past 12 months ..for example if i run the report for June 2011 then on the chart it should take as june 11..>may 11..>april 11........so on june 10 with respect to other values
>
> fyi .. i am using type: Numeric Axis..> Date Axis line chart and created seperate formule on top of date field to get past 12 months data
>
> Please advise how can i do that on the chart
>
> Thanks much,
> Lucky
Once you pull the data, goup on the date monthly, most recent first ,and then graph the summaries in the group.

How to create a generic method which invokes Web Service

Hi I have a question how to create Web Service client. In design mode I can't specify static url ?WSDL and process.
I found briliant method in apache cxf library.
for example
JaxWsDynamicClientFactory dcf = JaxWsDynamicClientFactory.newInstance();
Client clientA = dcf.createClient("http://soabpm-vm:8001/soa-infra/services/default/MailSender/mailsender_client_ep?WSDL");
Object[] resultA;
try{
resultA = clientA.invoke(new QName("http://xmlns.oracle.com/SynchDSBpel20/MailSender/MailSender", "process"), "@", "body", "topic");
}catch (Exception e){}
In my case I should create a method with params (urls ?WSDL, URI, operetion name, param1, praram2, param3)
Is there anything like CXF in ADF library's?

This can be very easily done using a web service proxy (Select web services from the categories and web service proxy from the items).
In the "Create Web Service Proxy" wizard, make sure you select JAX-WS client style. JDeveloper will use the JAX-WS web service API and JAXB (Java Architecture for XML Binding) to generate all required classes and methods required to call a web services, binding Java method signatures to WSDL messages and operations.
Regards
Antonis

How to create a generic error handling proxy?

Hello,
i have few services proxies.
I want to create a generic error handling osb proxy which does only errorhandling.
This proxy would be called by all my services.Now suppose my services proxies would throw any error,the control will pass to error handling block of proxy..from there i will call this generic errorhandling proxyusing a service callout or publish action.In this proxy i want to do all my error handling based on 'n' conditions.and i want to pass the message to the fault variable of services proxy..kindly suggest ways..*main challenge is passing the message to the fault variable of services proxy*

Hi,
For generic error handling framework or common error handling framework...create a bpel process which takes the error details payload and sends the inf/data as email to the particular receipients.
create business process with bpel process and proxy using business service.so wen ever error occurs at stage or route or proxy level ..call error handler action in OSB.Assign error handler details to the bpel input payload.
FOR EX:
<soap-env:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<com:test>
<com:ProcessInfo>testDetails</com:ProcessInfo>
<com:BusinessProcessName>testprocess</com:BusinessProcessName>
<com:BusinessProcessInstanceId>{fn-bea:uuid()}</com:BusinessProcessInstanceId>
<com:BusinessProcessStep>ReqLayer</com:BusinessProcessStep>
<com:ErrorCode>{string($fault/ctx:errorCode)}</com:ErrorCode>
<com:ErrorType>Technical</com:ErrorType>
<com:StatusCode>Error</com:StatusCode>
<com:ImplementationCode>OSB</com:ImplementationCode>
<com:ErrorDescription>{string($fault/ctx:reason)}</com:ErrorDescription>
<com:ErrorDateTime>{fn:current-dateTime()}</com:ErrorDateTime>
<com:Node>{string($fault/ctx:location/ctx:node)}</com:Node>
<com:Path>{string($fault/ctx:location/ctx:path)}</com:Path>
</com:test>
</soap-env:Body>
this assign the error details values to the bpel process.

How to create a generic TYPES?

hello!
what i try to do is following
eg:
when i call my function the user has the possibility to check the flag "show_button = 'X', and exports a table
when this flag is checked i want to display an icon in the first row of this table, so i need to extend the table structure which i import and add another attribute.
what i actually tried to achieve is this (but this is not working of course)
function
import:
 i_outtab type standard table.
field-symbols:
 <itab> type standard table.
assign i_outtab to <itab>.
TYPES: begin of mytyp.
 types: i_bt type iconname.
INCLUDE STRUCTURE <itab>
TYPES: end of mytyp.
and then i create a table with the type mytyp (which is not working, but i shows what i try to do)
so is there a way to do this genericly?

You can do that using the ABAP Run Time Type Services.
Example:
I have a function module Y_TEST with one Importing Parameter:
*" IMPORTING
*" REFERENCE(IP_IT_DATA) TYPE ANY TABLE
I have no idea about the table-structure and I want to add a field X_SELECTED of type XFELD to the end of the table to display it using CL_SALV_TABLE or something - this is how I do it:
FUNCTION y_test.
*" IMPORTING
*" REFERENCE(IP_IT_DATA) TYPE ANY TABLE
DATA:
 gr_tabtype TYPE REF TO cl_abap_tabledescr,
 gr_struc TYPE REF TO cl_abap_structdescr,
 lr_itab TYPE REF TO data,
 it_component TYPE cl_abap_structdescr=>component_table,
 wa_component LIKE LINE OF it_component.
FIELD-SYMBOLS:
 <wa> TYPE ANY.
* Reading 1st line of itab and getting structure ->
LOOP AT ip_it_data ASSIGNING <wa>.
 gr_struc ?= cl_abap_typedescr=>describe_by_data( <wa> ).
 EXIT.
ENDLOOP. "ip_it_data
* Getting all components ->
CHECK gr_struc IS BOUND.
it_component = gr_struc->get_components( ).
* Adding new field (X_SELECTED) to Component-Table ->
wa_component-name = 'X_SELECTED'.
wa_component-type ?= cl_abap_typedescr=>describe_by_name( 'XFELD ').
INSERT wa_component INTO TABLE it_component.
* Creating new structure-ref ->
CLEAR gr_struc.
 CALL METHOD cl_abap_structdescr=>create
 EXPORTING
 p_components = it_component
 RECEIVING
 p_result = gr_struc.
* Creating new table-ref ->
 CALL METHOD cl_abap_tabledescr=>create
 EXPORTING
 p_line_type = gr_struc
 RECEIVING
 p_result = gr_tabtype.
* Creating itab with our table-ref ->
CREATE DATA lr_itab TYPE HANDLE gr_tabtype.
ENDFUNCTION.
Hope that helped ...

How to create a generic SP for this requirment

Hi all,
i have a requirment like .....i have 10 sp's (sp1,sp2,sp3.....sp10) in a package named as 'generic_pkg'.
procedure sp1 (abc IN varchar2,
parameter IN varchar2,
sp_out1 OUT varchar2);
procedure sp2 (xyz IN varchar2,
parameter IN varchar2,
sp_out1 OUT varchar2,
sp_out2 OUT varchar2);
procedure sp3 (pqr IN varchar2,
parameter IN varchar2,
sp_out1 OUT varchar2,
sp_out2 OUT varchar2,
sp_out3 OUT varchar2);
procedure sp10 (pqr IN varchar2,
parameter IN varchar2,
sp_out1 OUT varchar2,
sp_out2 OUT varchar2,
sp_out3 OUT varchar2,
sp_out4 OUT varchar2,
sp_out5 OUT varchar2,
sp_out6 OUT varchar2,
sp_out7 OUT varchar2,
sp_out8 OUT varchar2,
sp_out9 OUT varchar2,
sp_out10 OUT varchar2);
now i want to create a new SP. the new sp is having input parameters as
procedure new_sp (sp_name IN varchar2,
parameter IN varchar2,
sp_output OUT varchar2);
now i will get sp name as input parameter and i have to check whether that sp is there on generic_pkg package or not.
if sp found , then i have to call that sp and have to return output.
the new_sp should be generic(i.e the new_sp should compatable to call any sp in the package 'generic_pkg'). my doubt is all the 10 sp's are having same inputs, but different no of outputs. How can i make new_sp as a generic sp?
procedure new_sp (sp_name IN varchar2,
parameter IN varchar2,
sp_output OUT varchar2); ---- ? how to handle?
please anybody can guid me with example....
thanks in advance.....
Edited by: user9041629 on Sep 7, 2010 6:01 AM

Your 'requirement' of being able to submit a procedure name as parameter will result in using dynamic SQL all over the place.
Consequently you violate the very reason why PL/SQL was invented: to diminish parsing
I pray you don't have any customers who are going to buy this 'product'. They are not to be envied.
I pray also you have a good lawyer.
Sybrand Bakker
Senior Oracle DBA

How to Create a Generic Compound Clip?

Sometimes, when I create a Compound Clip, a generic "compound clip" is created - i.e. it is not given the option to be named, thus does not become an Event.
Other times, seemingly doing the same thing, I am forced to give the new clip a name, which then becomes an Event. It seems hit and miss -- sometimes I am asked to name them, sometimes not.
The problem is, that in reusing elements from previous episodes, when editing the named Compound Clip, the Event is edited, and the older episodes are affected.
My question: How can I choose to create non-named, non-event Compound Clips?
Thanks,
Geoff

Thanks Tom. I am not aware of doing anything different between the two results. I simply select a bunch of clips, then right-click "New Compound Clip...". Sometimes it just does it, other times I get a dialog asking me to give it a name and choose the Event folder.
Perhaps I am incorrect, but I have done this for a long time, and never noticed what I am doing differently. Today, I am unable to reproduce the 'generic' compound clip.
Sorry I can't at this stage be more precise, but I admit that I must be doing something different to get the different results. I do have clips in my project that are simply called 'Compound Clip', and they do not belong in any Event (clicking on 'Reveal in Event Browser' does nothing). This is what I prefer.
Geoff

How to modify the Generic Delta in Standard Data Source...?

Hi BW Guru's,
We have one issue like all values are coming from customer master data data source 0CUST_COMPC_ATTR which is delta capable. Recently the functional guys done some modification on customer by remapping the field to sales rep. this will be impact on collector field (this is generic field - ZZ field). Now there will be frequent changes for collector field and the delta is not able to pick up the changed values in to BW system.
I have tried in different ways but not resolved finally i got some clue which as follows:
Data source 0CUST_COMPC_ATTR shows delta process as 'E' Unspecific Delta
Using Extractor (Not ODS-capable) in RSA2.
Now i would like to change the option to delta process to D unspecified delta using delta queue (not ODS-capable).
Can any one give advice me on this. Your help will be appreciated.
Thanks in Advance,
Venkat

Hi Olivier,
Thanks for quick response.
I am sorry for not mentioning the module on which i am working.
I am working on FI-CO extraction. I heard that In FI-CO the delta queue does not support because it won't support V3 Delta mechanism.
But any how i will try with ROOSOURCE and let you know the status of it.
If any advices please revert back with suitable suggestions.
Thanks and Regards,
Venkat

How to Create a Generic Delta Datasource

Similar Messages

Maybe you are looking for