How to create a Lion boot disk for Lion on a MBPRD?

I have a unique version of Lion on my MBPRD. How do I create a Lion Boot Disk for this unique version?

Why is it a Unique version of Lion? The only versions of Lion are ones for older Macs, Before the Mid 2012 models came out, and a version that includes the newer drivers for the newest model Macs, Current shipping Mid 2012 models.
If you are talking about a version for the new Mid 2012 models then you will need to wait for Apple to update their Lion Download servers because right now they do not have the newest Lion version available on those servers.

Similar Messages

How to get make a boot disk for lion

Hi,
I have a fatal disk error that required a full rebuild (so says disk utility) but how to obtain as there was no option to create at upgrade time and I can not see any other method. SO how do you do it?

Macs with pre-installed OS X Lion don't come with physical media. You have a recovery partition on your internal hard disk on your mac. If you want to reinstall OS X, hold down CMD + R when you hear the startup sound.
If you want to, you can buy an OS X Lion USB Thumb drive here: http://store.apple.com/us/product/MD256Z/A ($69.00)
You can also copy the recovery hd on an USB drive with this tool: http://support.apple.com/kb/DL1433

Enyone know how to get USB stick back to normal after creating a USB boot disk for Mavericks?

Enyone know how to get USB stick back to normal after creating a USB boot disk for Mavericks? https://discussions.apple.com/message/23527458#23527458

You should just be able to erase it using Disk Utiilty. I did with my 8Gb.
If not I have a USB deep format tool, but it only works with Windows: http://tinyurl.com/mwor6s9
You can download that and unzip it, then run it on a PC to fully erase and format the flash drive. Format it in FAT, and then the Mac will read and mount it so you cna once again format it with HFS extended for Mac use.

How do I make a boot disk for my new iMac?

How do I make a boot disk for my new iMac?

Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
   2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
     sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
     /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again. Wait for the process to complete which will take quite some time.

How can I get a boot-disk for a Compaq P2500 laptop Windows XP Home Edition?

I'm already in another forum with a eerily similar question, but that's for the HP Media Center Pavilion m8000e desktop system (Windows Vista Home Premium) I was just given; I've ordered a new hard drive for that. I assume the directions to create a boot disk with the *.iso file (using Imgburn) is going to work; I have the 25-digit code for that.
This question here now is for my wife's older Compaq P2500 2596US laptop running Windows XP Home Edition. This too needs a new hard drive, but I also am missing the boot disc for this; I do have the 25-digit product code.
How can I get a boot disk for this laptop? I tried the Ubuntu method outlined in a few posts; geez, what a headache ... never could get it managed. Does HP not make any boot disks available? Microsoft told me to check with HP.
I can furnish the product code; model #; serial# ... gee, maybe the oroginal receipt is even laying around somewhere ...
I need a boot disk to get the new hard drive up on board (if I end up ordering that).
Thanks for any help!
Michael

Hi
Please find the link given below might be helpful for your.
http://www.computersurgeons.com/productdetails.aspx?ID=4219
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

How do I create a start-up disk for Lion

I would like to resize the Boot Camp partition on my new iMac running Lion 10.7.2. To do that, using iPartition, I need to boot the system from another drive. Ideally I'd like to use a USB flash drive or a DVD as the alternative boot drive.
Obviously I can't boot from the Recovery HD partition on the iMac's boot drive, so I used Recovery Disk Assistant to build a Recovery HD on a flash drive. When I boot the system up from that flash drive I can see the icons for all of my files on the iMac, including those on the secondary hard drive, where iPartition lives, but I can't seem to launch any applications, including iPartition, because they are all grayed out. Best I can tell, the Recovery HD is designed to provide installation and repair services, but doesn't give you a fully functioning OS.
So my question is: How do I create a disk that will allow me to start-up a fully functioning copy of Mac OS X Lion from a drive other than my normal boot drive? My second question is: Do I need to move iPartition to that drive or will it run from the secondary drive built in to the iMac.
I'm a newbie to the Apple world, so if the answer is completely obvious, please forgive me for asking.
Bob

I used SuperDuper to create a bootable clone on an external drive where I installed my maintenance programs. Now whenever I need then I just boot from it.
Allan

How do I make a boot CD for Lion?

I just bought my kids MacBook Pros with Lion pre-installed. It came with no resotre disk- what if they crash? How do I make a bootable 'recovery disk' without having to buy another copy of Lion from the App store?
I found this link on Google-
http://www.ehow.com/video_4978308_create-mac-startup-disk.html
but soemthing doesn't make sense about this method- wouldn't the diosk image you were trying to burn end being way bigger than a DVD?

Macs with pre-installed OS X Lion don't come with physical media. You have a recovery partition on your internal hard disk on your mac. If you want to reinstall OS X, hold down CMD + R when you hear the startup sound.
If you want to, you can buy an OS X Lion USB Thumb drive here: http://store.apple.com/us/product/MD256Z/A ($69.00)
You can also copy the recovery hd on an USB drive with this tool: http://support.apple.com/kb/DL1433

Creating a floppy boot disk for solaris 10

Hi
I have downloaded the Solaris 10 x86 DVD and and cd ISO from the Sun download site. However my PC doesnt boot from the CD Rom.
Is there a way to create a bootable floppy to install Solaris?
any tips regarding the above very welcome.
thank you in advance
tesh

Hi
I have downloaded the Solaris 10 x86 DVD and and cd ISO from the Sun download site. However my PC doesnt boot from the CD Rom.
Is there a way to create a bootable floppy to install Solaris?
any tips regarding the above very welcome.
thank you in advance
tesh

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Disk Utility wants start up disk for Lion

My 2.66 Ghz Intel i7 MacBook pro seems to have slowed down considerably after the Lion OS upgrade. I ran a scan using DiskUtility and it says the disk has errors. The repair needs me to start up the MacBook Pro using a startup disk/installation disk. Since its an online upgrade how to create a startup boot disk?
Thanks
Advith Shetty

http://support.apple.com/kb/HT4718
Lion has a Recovery volume which you can run the DiskUtility on the main volume that needs repaired.
Reboot hold command-R or alternatively hold the option key down.

Buying a boot disk for p6130y

Where and how do I buy a boot disk for my computer? We can find the manual, but cannot find the disk. The HP website is confusing and their customer service is less than helpful.
Thank you.

Hi:
I'm assuming by boot disk, you want a system recovery disk for your PC?
I cannot find that product number anywhere.
Please take a look at this guide to finding your product number or use the tool on the second link (if you can still use the PC) to see if it identifies it for you:
http://h10025.www1.hp.com/ewfrf/wc/findModel?cc=us&dlc=en&lc=en&os=228&sw_lang=
http://h20270.www2.hp.com/ediags/gmn2/welcome.aspx?lc=en&cc=us
Paul

How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?

Well that is basically the question:
How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?

can I access my programs from the other partition, so I can save space ...
No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
how large would this have to be
I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS. I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.

How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.

Try calling 1-800-676-2775. Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk). *May* is only because they may not burn disks for Leopard anymore.
If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
Have you considered Snow Leopard?. Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk?

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk? It is the start up disk and I can't figure out how to get it out of the computer so I can put my lion boot disk in. Thanks

turn the mac all the way off. turn the mac on by pressing the power button. as soon as the apple logo appears, pres and hold your mouse button(trackpad mouse clicker etc...) until the CD comes out.

How to create a Lion boot disk for Lion on a MBPRD?

Similar Messages

Maybe you are looking for