How to get make a boot disk for lion

Hi,
I have a fatal disk error that required a full rebuild (so says disk utility) but how to obtain as there was no option to create at upgrade time and I can not see any other method. SO how do you do it?

Macs with pre-installed OS X Lion don't come with physical media. You have a recovery partition on your internal hard disk on your mac. If you want to reinstall OS X, hold down CMD + R when you hear the startup sound.
If you want to, you can buy an OS X Lion USB Thumb drive here: http://store.apple.com/us/product/MD256Z/A  ($69.00)
You can also copy the recovery hd on an USB drive with this tool: http://support.apple.com/kb/DL1433

Similar Messages

  • How do I make a boot disk for my new iMac?

    How do I make a boot disk for my new iMac?

    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again. Wait for the process to complete which will take quite some time.

  • How do I make a boot CD for Lion?

    I just bought my kids MacBook Pros with Lion pre-installed.  It came with no resotre disk- what if they crash?  How do I make a bootable 'recovery disk' without having to buy another copy of Lion from the App store?
    I found this link on Google-
    http://www.ehow.com/video_4978308_create-mac-startup-disk.html
    but soemthing doesn't make sense about this method- wouldn't the diosk image you were trying to burn end being way bigger than a DVD?

    Macs with pre-installed OS X Lion don't come with physical media. You have a recovery partition on your internal hard disk on your mac. If you want to reinstall OS X, hold down CMD + R when you hear the startup sound.
    If you want to, you can buy an OS X Lion USB Thumb drive here: http://store.apple.com/us/product/MD256Z/A  ($69.00)
    You can also copy the recovery hd on an USB drive with this tool: http://support.apple.com/kb/DL1433

  • How to make a boot disk for new iMac?

    I just purchased a new iMac equipped with a bare bones 1TB SATA hard drive.  I want to replace that disk with a 1TB SSD from Crucial (less than 1/2 of the cost of purchasing the iMac with the SSD).  I have a Time machine backup of the iMac on a Time Machine/Airport device; how do I make a boot disk that can get the OS up and running, and able to restore the backup from the Time Machine?
    Thanks,
    Tony Darst
    Baton Rouge, LA

    tdarst wrote:
    I had not given the warranty issue any prior thought; thanks for pointing that out.  Is there a way around the warranty issue; such as a "factory authorized" way to install it, that is feasible?
    Thanks for the quick response...
    TD
    You can take it an AASP to have the install done however you probably would be better off returning the machine (assuming it was bought directly from Apple and is less than 14 days old) and buy the configuration you want. Even if an AASP does install the SSD there is no guarantee Apple will honor the warranty, it's 100% at their discretion.

  • How can I make a bootable disk for Mountain Lion?

    How can I make a bootable disk for Mountain Lion?

    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.

  • How do I make a recovery disk for my Mac running 10.5.8?

    How do I make a recovery disk for my Mac running 10.5.8?

    Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • How do I make a boot disk?

    How do I make a boot disk in OSX 10.4 something and have some tools like Disk Warrior on it? I found one program at versiontracker that does this but it doesn't work in .4, oh well ...... or I can just wait for several days til my DiskWarrior CD comes in the mail ....... but who can be without their computer that long in today's day and age? yup, you guessed it, my powerbook won't start up and I've tried lots so far ...... hoping dw will do the trick.

    http://www.macosg.com/group/viewtopic.php?t=13956
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    iTunes: MacOSG Podcast
     An Apple User Group 
    Disclaimer required by Apple Discussions Terms of Use: MacOSG - a non-profit Apple User Group - may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • How can I make a recovery disk for an imac 24 "  early 2008 to April 2009 or connect via thunderbolt to another imac

    How can I make a recovery disk for an imac 24 "  early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 "   or connect via thunderbolt to another imac
    ann

    You will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
    What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
    Boot Using Command+R keys:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "COMMAND" and the "R" keys together.
      3. Release the keys when the Utilities Menu appears.

  • How do I make a boot drive for my imac?

    What do I need to make a boot drive for my iMac in case the internal drive fails?  About how much memory is required (I'm running Snow Leopard.)  Or, can I run it off the disk that came with my machine?

    Yes, you can do that - I prefer having an up to date bootable clone of my entire system for emergencies. It's easy to do that: download either CarbonCopyCloner or SuperDuper (I use both), hook up an external hard drive (preferrably Firewire because it is much faster), format it to Mac OS Extended (Journaled) and GUID partition scheme (under Options) - both done in Disk Utility (Applications > Utilities) and then you simply launch either one of the two apps mentioned and let them do their thing (170 GB take about an hour).
    You will wind up with a complete carbon copy/bootable clone of your system.

  • How can I make an install disk for iTunes?

    I need to update iTunes but I cannot get the download to complete. The connection has been confirmed as stable so it doesn't appear to be a system issue. If I make an install disk for the current version of iTunes on another PC, I should be able to install it. The download doesn't give options to save to a disk. How should I go about this?

    The download doesn't give options to save to a disk
    Go to the following webpage and click the "Download" button, and then click the "Save" button:
    http://www.apple.com/itunes/download/
    ... once the iTunesSetup.exe (installer) file has downloaded, then copy the iTunesSetup.exe file across to your CD (or even a large-enough thumb drive or something similar). Copy the iTunesSetup to your PC from the CD or thumb, and start the install by doubleclicking on the file.

  • How to create a Lion boot disk for Lion on a MBPRD?

    I have a unique version of Lion on my MBPRD.  How do I create a Lion Boot Disk for this unique version?

    Why is it a Unique version of Lion? The only versions of Lion are ones for older Macs, Before the Mid 2012 models came out, and a version that includes the newer drivers for the newest model Macs, Current shipping Mid 2012 models.
    If you are talking about a version for the new Mid 2012 models then you will need to wait for Apple to update their Lion Download servers because right now they do not have the newest Lion version available on those servers.

  • How do you make a startup disk for Mac Pro with mountain lion

    My Mac Pro did not come with a disk how do you make one or get one??
    If you ever need to repair or reformat your hard drive you need one!

    If you still have - or can download - the Lion Installer app from the Mac App Store, you'll find an app titled "Install Mac OS Mountain Lion.app" in your Applications folder. If it's not there, and you've already purchased it, just go to the MAS, look under your Purchases tab and download it from there. If you haven't already purchased it, you'll need to do so using your Apple ID.
    Once you have the installation app, get a 8GB+ USB flash drive and download DiskMaker X - just plug in the flash drive, start up DiskMaker X and follow the instructions. You'll now have a bootable installation disk.
    Good luck,
    Clinton

  • How do I make a bootable disk for mavericks

    Do I have to do it manually or is there an App which will do it for you?

    Try here: It works, as I have just done it.
    http://osxdaily.com/2013/06/12/make-boot-os-x-mavericks-usb-install-drive/

  • How can I make an Install Disc for Lion 10.7.5, when it already installed

    I purchased the Lion 10.7.5 download through the App store and it started downloading before I realized that I needed to make a copy of it, is there a way to make a backup copy of the operating system in case of a problem. I was not allowed to re-download it through the app store.
    I purchased the Lion 10.7.5 download through the App store and it started downloading before I realized that I needed to make a copy of it, is there a way to make a backup copy of the operating system in case of a problem. I was not allowed to re-download it through the app store.

    Thank you... I will take your advice and relax...
    OK will do.
    As you can tell, I totally disagree with apple on this.... It should be a DEFAULT that the ability to make a DVD start up disc is always there... not the other way around.
    I have spent hours on this upgrade... upgrading the Snow Leopard, upgrading to Lion, Installing new hardware, re-installing new hardware, re-installing the old hardware...
    Some people, like myself, have the ability to DIY, but I don't have the incredible highly detailed inside knowledge that I apparently have to possess...
    Thanx

  • How to make boot disk for MacBook Pro with Mavericks pre-installed

    Hi -
    I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0).  I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion.  In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk.  In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed).  I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks.  Thanks very much for any help anyone can provide.
    Shelly

    Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
        2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
        3. Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

Maybe you are looking for