How to create a new folder at the specified FTP location

Hi everyone,
Please guide me for the following query:
How to create a new folder at the specified FTP location if the folder does not exists at that location through ABAP program.
Please guide.
Thanks and Regards
MP

Have a look at the function group SFTP. Use function module ftp_command to create the directory sending the mkdir command.
Use the where-used list to find sample programs.

Similar Messages

How to create a new folder within the video folder in media

Hi, I'm trying to figure out how to create a new folder within the video folder in media. I can easily create new folders within the pictures folder but not in videos.....Why??? Thanks in advance for your help.
Message Edited by dany_s on 06-25-2009 03:58 PM
Solved!
Go to Solution.

Hello,
I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
Soft reboot :
1) Hit the three following keys at the same time :
- Alt
- Right Shift
- Delete
2) wait 2 minutes for the Blackberry to wake up.
Hard reboot :
1) your Blackberry device is on
2) remove the battery and wait for a minute
3) Put the battery back
4) wait 5 minutes for the device to wake up.
Please tell us if it works for you.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

How to create a new folder in the existing role

hi,
i need to save the workbook trial balance under the folder trail balance currently the workbook is under BW Reporting folder ,but for that i need to create a Trial Balance folder and move the trial balance workbook to that particular folder
could anyone of you help me.
Thx
apparao

Hi,
You have to:
-Tx(PFCG)
-Select the role that you want to create a folder
-Go to "Folder Tabsheet"
-Create your folder
-Save
-Open your workbook
-Save the Workbook into this role in the corresponding folder.
Regard, hope it helps
Assign point if useful please.

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.

Anyone?

How do you create a new folder in the library folder

How do you create a new folder in the library?

In the user Library? Open Finder and select Go then press the Option key. In the list you will see your user Library folder (underneath Home). Click it to open it. Now you can add a folder inside. You can left click/hold and drag the Library icon at the top of the Finder window to your Finder Sidebar so it's always avaliable.

How do I create a new folder in the standard e mail app

HHow do you create a new folder in the e mail app,

Mhuddy wrote:
HHow do you create a new folder in the e mail app,
You don't. If you have an imap email account, you create the folder when you log into your email account on a browser.
Can't do it for a pop account.

I have a new western digital 1TB ultra. how do i format it? i can't create a new folder inside the external drive.

I have a new WD My Passport Ultra external drive. Once connected to the Macbook Pro retina, I can't create a new folder in the external drive. What do I do to solve the problem?

You should be able to format it for use with your computer using Disk Utility in the Utilities folder:
http://osxdaily.com/2012/01/04/format-an-external-hard-drive-or-usb-flash-drive- for-mac-os-x/

How to create a new folder in my iPad hotmail?

How toI create a new folder in my iPad hotmail?

You can only do it with IMAP email account; to do this:
1. Go to your email account in the Mail app and look at the window where your Inbox, Trash folder and Sent folder are.
2. Tap the Edit button
3. Tap Add Mailbox (bottom)
Note: If there is no Edit button, your email account is not a IMAP account

Creating a New Folder on the Dock

I recently purchased CS3 for my computer and am looking to consolidate them into one folder for my dock. Under the applications window all the separate adobe programs have their own folder so I can only bring them down to the dock individually. I want to put all 8 programs that are currently on my dock into one folder that is located on my dock. I would also like to attach an image to that new folder instead of the plain folder look. The most important thing though is to just figure out how to add a folder to my dock. If I create a new folder on the desktop and try to drag it onto the dock it doesn't work. Any help??

create a folder on the desktop (or any other place on the HD), put aliases to your 8 programs into that folder and drag the folder to the right side of the dock (to the right of the divider).

How to create a new folder in my email box

how to create a new folder in my email box?

Organizing Mail
http://support.apple.com/kb/HT5361

In Mavericks, every time I try to create a new folder on the drive I get a prompt for my password. I checked Get Info on the main drive and under Sharing

I got a new 27" iMac with 10.8.5 and migrated a 10.6.8 system and files. It was working fine. After about 2 weeks I was looking at the Sharing & Permissions and saw an account "wheel". I mistakenly (I NOW know it was a mistake) changed the permission to no access and subsiquenty could not boot the computer. I had an older iMac so I built a boot disk with the Mavericks installer on it. Booted the computer and restored from a Time Machine backup previous to the change of permissions of the "wheel" account. I went ahead and did a clean install of Mavericks
The computer is now running with Mavericks installed and I am rebuilding. When I go to create a new folder on the system drive I get prompted for a pasword.
When I checked the permissions and sharing on the main drive it tells me "you can only read".
I am logged in with an admin account. I have run Disk Utiltiy and Tech Tool Pro's permission verify and repair. Given what happend last time I changed permissions I am reluctant to make any changes.
Anyone have an idea as to what I should do.
Thanks in advance.

Here is the dialoge box. My account does not appear. Can I just add my account or is there some other problem?

Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?

Mac OSX, 10.7.5, LR 5.6 After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it. Why is it doing this?

I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
Thank God Apple hasn't (yet) broken bash.

Why can I create a new folder in the catalog but it only shows up in windows not the catalog

Why can I create a new folder in the catalog but it only shows up in windows not the catalog

Not sure I understand the question but it could be because you meant to say "can't" somewhere in the sentence. anyway, just guessing here:
Try going to:
File >> Watch folders
Now you can Add new folders here that you see them in Windows. The word ADD is a button to browse for the folders and hopefully this will solve the problem you are having.

Can I create a new folder using the command line interface

Hi.
Is there a way to create a new folder in an existing business area, from the command-line?
We have an application that provides an interface for the user to create a table and load flat file data into the table. After loading the data, the user will verify the loaded data using discoverer. If there is a command line interface to create a new folder, then the script that created the table can also call the discoverer command line to create a new folder for the new table. Is this possible?
Thanks

Hi,
I think I am having a similar question here. I am using Oracle 10g on Windows xp.
I logged in to Oracle from command prompt. I used command create directory myFunDir as 'd:/funDir';. Oracle returns: Directory created. But I couldnt find the directory myFunDir! Where is it?
Thanks.
Newbie.

When I create a new folder on the desktop of my macbook pro, it is automatically populated with all of the files on the desktop, which I don't want.

when I create a new folder on the desktop of my macbook pro, it is automatically populated with all of the files on the desktop, which I don't want.

I got the problem solved. It was pretty simple but new to me. I had evidently inadvertently switched the setting in the "View" tab on the dropdown menu so that all of my desktop folders were populated by all folders/documents residing on the desktop.
The solution was to open one of the folders, then go to the "View" tab and change the setting to "List." Presto, now all the folders include only the contents I had intentionally loaded into them.

How to create a new folder at the specified FTP location

Similar Messages

Maybe you are looking for