How to create a new selection screen LDBS PNPCE

how to create a new selection screen LDBS PNPCE

Hello Ankit,
Do you want to create a new selection screen in LDB PNPCE, or do you want to create a new selection screen in one of your reports using LDB PNPCE?
For later (which is more common), you can use HR Report Category.
Hope this helps.
Best Regards,
Biraju Rajyaguru

Similar Messages

How to create a new selection screen IN LOGICAL DATABASE PNPCE

how to create a new selection screen LDBS PNPCE

Hello Ankit,
Do you want to create a new selection screen in LDB PNPCE, or do you want to create a new selection screen in one of your reports using LDB PNPCE?
For later (which is more common), you can use HR Report Category.
Hope this helps.
Best Regards,
Biraju Rajyaguru

How to create a variant selection screen

Hi experts,
Can you tell me " How to create a variant selection screen ".
Please it's urgent.........
Thanks
Basu

Hi ,
Goto your selection screen
Make entries in the fileds od the selection screen
press save button, it will ask you for the mane of the Variant
Give the name of the Variant and save it
Variant is now created for the selection screen.
Reward if useful.
Regards,
Shilpi

How to create variant for selection screen which is in subscreen

Hi,
How to create variant for selection screen which is in subscreen in a module pool program?
it is very urgent.
Thanks in advance.

Hi,
You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
Regards
Sudheer

How to create button in selection screen

hi
experts can u help me plzzzzzzzzzzz
for this

Hi,
You can create Push Buttons in the Slection Screen by assigning a User commnand to it.
Below is the stynax
SELECTION-SCREEN BEGIN OF SCREEN 1000.
SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
                   USER-COMMAND CODE1.
SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
PARAMETERS     PAR2 TYPE I.
SELECTION-SCREEN END OF SCREEN 1000.
then you need to write the code for the User command ( here CODE1) at the Selection screen event.
You can also check the Program demo_sel_screen_pushbutton in any Sap Server. this is a demo program.
Let me know incase you need any further info,
Thanks and Regards
Message was edited by:
        Pallavi S

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

How to Add a new Selection Field in COPA Report

Hi Gurus
I'm new on SAP COPA reporting and I don't know how to solve this problem.
I need add a new Selection-screen field (char1), not connected with any characteristic.
This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT
ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
Thank-you in advance for your help.
Claudio

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

How to can we do selection-screen modification for LDB?

Hi All,
I have custom field in my selection-screen of LDB PNP.
Can you people please let me know how can I put the selection-screen modificaiton For ex:
i have created
parameters a as checbox.
select-options: p_btrtl for p0001-btrtl no-intervals.
now If the check box is selected then p_btrtl we can enter values or esle If check box is not selected then p_btrtl will be grayed out, ( I.e. SCREEN-INPUT = 0)
This is simple from ABAP without LDB. But with LDB can we achieve?????????????
Satish
Edited by: Satish Vasireddy on Jun 23, 2010 4:05 PM

you can use the following logic for the additional selection validation. I have done by using PNP LDB. Ex : I have done for one of the field in IT0377.
SELECT-OPTIONS: s_bplan FOR p0377-bplan.
*&      Form check_selection_0377
This subroutine is used to check the selection screen
FORM check_selection_0377.
LOOP AT p0377 WHERE pltyp IN s_bplan
                 AND levl1 IN s_lti
                 AND   begda LE pn-endda
                 AND   endda GE pn-begda.
    CALL FUNCTION 'HR_CHECK_AUTHORITY_INFTY'
      EXPORTING
        tclas            = 'A'
        pernr            = pernr-pernr
        infty            = p0377-infty
        subty            = p0377-subty
        begda            = pn-begda
        endda            = pn-endda
        level            = 'R'
      EXCEPTIONS
        no_authorization = 1
        internal_error   = 2
        OTHERS           = 3.
    IF NOT sy-subrc IS INITIAL.
      DELETE p0377.
    ENDIF.
ENDLOOP.
selection not found and no value selected
IF sy-subrc NE 0.
    READ TABLE s_bplan.
    IF sy-subrc EQ 0.
      REJECT.
    ENDIF.
    READ TABLE s_lti.
    IF sy-subrc EQ 0.
      REJECT.
    ENDIF.
ENDIF.
ENDFORM.                    " check_selection_0377
Regards,
Preetham

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a new place in iPhoto 11 without doing any harm?

Yes, I know how to create a new place for a photo -- theoretically:
Select the photo.
Make sure the Info icon in the lower right portion of the iPhoto window is clicked and the too-tiny-for-any-but-the-youngest-eyes map is displaying.
Click in "Assign a Place..." and begin typing a place that iPhoto will search for. It searches in both "your places" (i.e., those that you have already defined) as well as in Google Maps.
When you see a place in the search results list that you think might be close to the one you mean, select it.
A pin appears on the itsy-bitsy map. Move it to the exact place you mean. You can make controls appear on the map by moving the mouse over the bottom of the map. The controls allow you to zoom in and out, and to change views (Terrain, Satellite, Hybrid). When the pin is where you want it, click it. The current name of the location appears. Modify it to the name you want, then click the check mark.
That's "all" there is to it ... except for a couple of "gotchas."
There's a difference between what happens when you select a place that you've defined and when you select a place that Google found in the search results. If it's a place that you've defined, and you then move the pin to a new location and/or change its name, this will affect all photos assigned to the custom place. In effect, you are modifying the place.
All places have a radius associated with them, thereby making them circles. You can adjust the radius only in the Maintain My Places window. In the itsy-bitsy map it doesn't even appear. However, if the newly defined place overlaps existing ones, all the photos assigned to the overlapped places will be assigned to the new one. Their pins will remain where they were.
Now, before anybody suggests sending feedback to Apple, let me emphasize that I have been sending Apple feedback on the wrong-headed implementation of Places since iPhoto 9.0. New versions have come and gone (the current one is 9.1.2), but these "features" have remained. So my purpose in opening this thread is to consolidate work arounds to these "features" in one place. My work around:
Whenever I define a new place, I select only a single photo. I try to name my places so that I can distinguish them from those that Google finds. In order to avoid Gotcha 1 I select a place that Google finds and try to place the pin close enough to where I want it, but far enough from any other places that I've defined. I give it a name that I can easily find it Manage My Place.
I immediately open Manage My Places and select the new place. I first note the pins near it, then decrease its radius, move the pin to the desired location, note the nearby places, and give it its final name.
I then view Places and navigate to the new place to view the photos assigned to it. If I'm lucky, there's only one. Otherwise, I have to reassign the other photos to their correct places.
Richard

So... in the hope it will not confuse folks more, let me be more specific of a procedure that works for me...
Procedure to create a new My Places location.
OK there is more you can do with a non-GPS Coord linked photo.
Click Info and then click Assign a Place in the lower right of screen. (if your photo has a location linked to it already the Assign a Place will NOT show up.)
Choose a location name near the actual location that Google Maps can find.
Click that location in the Google Maps list that appears and your photo will be temporarily assigned to that location.
Now type over that location name in order to make sure to give that location a unique name that will show up in your My Places list and click that name after you have typed it to be sure it is accepted.
Now in iPhoto click Window/Manage My Places and go the that newly named location in the large My Places map. There's no easy search. You have to run down through the alphabetical list.
Drag the flag to the location you want this place to be and click Done.
The location name is now in your My Places list at the location you dragged the flag to!
It is important to note that only your unique named locations show up in your Places list, so if you want to modify the location coordinates you have to establish a unique name for it.
This is much more complicated that previous iPhoto versions!
But Yeah!!!!!!!!!!
It really works!!!!!!!

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How to create a new session by ABAP?

Good afternoon everyone:
This is my first question in the forum, can anybody tell me how to create a new session to display report output in a ALV program? Which function or method can used? I'm freshman.
Thx.
Edited by: Joshua Lee on Nov 21, 2008 10:04 AM

Hi Joshua,
Welcome To SDN.
I am not clear about your queestion.
if u r doing an ALV report if u give selection screen inputs if press execute buttom or F8 u wil get the report.
if u want the out put in the next screen. you can develop the screen in the module pool
Regards
Rasheed
Edited by: Rasheed salman on Nov 21, 2008 10:25 AM

How to create a new System Data

Hi guys.
I need to create a new System Data with which to filter a list output using a field derivated from siebel marketing. This data isn't between the standard system data like CampaingCode, SegmentId .....
Now i discover one .XML file (someting like Marketing....xml), in the OracleBIData/web/config directory, in which there are defined all the standard System data like:
<WebExpression>
</WebExpression>
Can I try to modify this file and add a new system data? if the answere is YES, hao i can do this? My real problem is how take a system value, from siebel marketing, to assign at this new systme data.
Thanks in advance
Best reguards

Hi
thanks for your solution,
i created a new Data carrier type AC for viewing auto cad files and given the path as, C:\Program Files\AutoCAD 2006\acad.exe"
and at Define serveres and files or folders,
defined the data carrier as Autocad type was default as AC,
at Identify frontend computers i could not enter any thing it is only in display form and no values were there and niether could be entered.
and my datacarrier created is not there to be selected while creating documents.
through CV01N create documents.
i suppose this is because i have already defaulted PC as the data carrier type. default system as my data carrier.
please clarify my Below douts also
as in my configuration i have defined only one Datacarrier ie Default PC, will this do all the need full, or will lead to to any complication in any aspect,
i want to know what is the Advantages of defining many datacarriers or the Limitation of a single Datacarrier.
iam facing a situation where a particular software say PDF reader or AutoCAD, is not installed in all the System. and iam thinking of installing this Software in a particular System or say in the Content Server system.
can this software be made used to view these cad and Pdf files on the front end system where this software is not installed,
Say in a particular PC the software AutoCAD is not installed and if he wants to View the AutoCAD file,
another problem iam facing is
while Creating a New AutoCAD file in my system through DMS Create, it gives a message "Drawing file is not Valid"
while i can create a Word Doc File, but it is not possible to create a new AutoCAD file throuh DMS, (AutoCAD is Installed in my system)
also i have no idea of how to create a New Data carrier type,
what exactly have to be filled in
1, define data carrier type
2, define server and files or folder
3, identify frontend computers
please provide configuration details or if possible screen shot details
points will be awarded for sure.
Thanks and Regards
Sathish

How to create a new partition

i just got a new thinkpa. i would like to know how to create a new partition.
i tried partition magic 8.0 and it gave me BSoDs. please let me know. thanks.
thinkpad t400 t9400
2gb ram
windows sp3
160gb 7200 rpm

folivio wrote:
I'm not an expert, but I partitioned the C: drive and made a partition for Windows 8. It worked perfectly as a multi-boot setup.
A word of caution...Make sure that you want to make it a permanent change. When I removed the Win 8 partition and tried to restore my system to factory settings, I could not get the F2 during restart to work. F2 now brings up the multi-boot screen. So I tried to restore using the DVD Restore Set I made before I did anything to the partitions. I was able to boot to the DVD Restore Set by using the F12 key during restart and selecting the BDDVD drive. It looked like it was going to work, but after it loaded the minmum Windows files and I clicked on Restore, I got an error stating that the partition had changed and I could not restore.
I contacted tech support and they are sending me a disc to restore the system.
Regards
Thanks for the heads up. I'd like to use the SSD for installing Windows 8. It seems to have about 25GB free. Isn't that a better place to install the OS? I am not sure why the bigger drive is marked as C: and the small, faster one as D: :-(

How to create a new facebook account in iphoto?

How to create a new facebook account in iphoto?

Instructions can be found by selecting iPhoto Help from the Help menu within iPhoto.

How to create a new selection screen LDBS PNPCE

Similar Messages

Maybe you are looking for