How to create a pass fail criteria

After visually analyzing a particle i.e. its area I need to decide if the particle passes or fails the inspections. How do I create a pass fail criteria after "Particle Analysis" in LabView? Thanks

Here is a VI that will demonstrate what you might consider doing.OH buy the way the guy I was talking about is doing research now at UC davis. I hope this will help you out. I would also be interested in other comments as well.
Joe
Joe.
"NOTHING IS EVER EASY"
Attachments:
pass_fail_crit_with_array.vi ‏46 KB

Similar Messages

  • Using a popup and PASS/FAIL Criteria

    How do you use a popup to query the user for PASS/FAIL criteria? I have an LED ON/OFF. Want to use POPUP to ask user condition. If LED is in an incorrect state, seq fails. Want to allow user 2nd chance in case wrong button is hit the 1st time.

    Look at the attached seq, and the Post Expression and Status Expression of Test1. Do the same for Test2 and Test3, but change the logic to make button 2 pass for testing LED off. Do you really want to have a terminate action in your Post Action? This causes an incomplete test without a pass/fail indication. Instead, set pass/fail like in Test1. If you want to abort the rest of the test, put a Goto End in your Post Action instead of Terminate.
    BTW, Mr. Eastwood, can I have your autograph?
    - tbob
    Inventor of the WORM Global
    Attachments:
    led_tests_on_off[3_0].seq ‏25 KB

  • How can assign a PASS/FAIL test to each element of a cluster?

    I would like to pass a cluster from Labview 8.6  to TestStand 4.1.1 and apply a pass/fail test to each boolean element of the cluster.  For elements of the cluster that are string values, I would like to apply a string value test.  For elements of the cluster that are numeric values, I would like to apply numeric value or limit tests.  How can I do this? 

    Hi epsilon-delta,
    The best way to do this would be to create a custom data type from that cluster and store the output of your vi to a local variable. You can then add Pass/Fail Test, Numeric Limit Test and String Value Test steps (using the None adapter) after the Action step to test each element of the cluster.
    Eric B.
    National Instruments

  • How to create workflow-status = failed with ContentService?

    Hi!
    For test-purpose I need a workflow with the status "failed". How can I create one?
    greetings
    Verena

    Hi Robert
    May this help
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/eddef503944dc6bbe8d81a2cec44e8/frameset.htm">Customising UWL tabs</a>
    Check the <a href="https://help.sap.com/javadocs/NW04S/current/uw/index.html">UWL API</a>
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/57/c223be82104792a15c2df11377b9ed/frameset.htm">Using UWL</a>
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0a/ad68c125ae496f8c04a25090bd2e3c/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/3e/09df7f284f4fb9b50aaedf80652f4c/frameset.htmhttp://help.sap.com/saphelp_nw2004s/helpdata/en/36/dd4ad73c86412e81e9ce66eeb147e7/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/frameset.htm
    Thanks
    Swathi

  • How to create and Pass DBLINK name at the run time

    Hi,
    Please help me out ....
    ACCEPT DB_USER PROMPT 'Enter the DB user name :'
    like this i will get the DB_USER name and i want to create one dblink with that userbame at the runtime
    and in all my .sql file i have to append that user name and dblink .. how to do this ....
    for example ,
    1.sql file contains a query like this
    select *
    from <user>.emp@<dblink>
    where ename= 'KING'
    ACCEPT DB_USER PROMPT 'Enter the DB user name :'
    user enter : SCOTT
    and the dblink should create a name like SCOTT_DBLINK
    and it should make the select clause in the .sql file as
    SELECT *
    FROM SCOTT.EMP@SCOTT_DBLINK
    WHERE ename = 'KING';

    Hi,
    Do you want to actually CREATE DATABASE LINK on the fly? - Don't there are all sorts of implications there.
    If not, go ahead and read about [SQL*Plus Substitution Variables|http://www.oracle.com/technology/support/tech/sql_plus/htdocs/sub_var.html]
    Regards
    Peter

  • Need help with pass/fail expression​.

    I've got an array of strings parameter called Parameters.CAN_Switch_Channel_Name[0] (equal to a string) which gets passed into a subsequence.  During run time when this subsequence gets called, a new parameter gets created which gets named the string which is passed in through Parameters.CAN_Switch_Channel_Name[0].  So for instance if Parameters.CAN_Switch_Channel_Name[0] is equal to CC_VS_Spd.CC_Set_Switch, then a parameter will get created at run time called: Parameters.CC_VS_Spd.CC_Set_Switch.  I want to create a pass/fail expression to check the new parameter.  I am not sure how to build the expression.  I tried:
    Parameters."Parameters.CAN_Switch_Channel_Name[0]"​  This didn't work!
    Parameters.(Parameters.CAN_Switch_Channel_Name[0])​  This didn't work either!
    I need a way of pulling out the value in Parameters.CAN_Switch_Channel_Name[0] and appending it to Parameters. to reference the parameter created at run time.
    Any ideas?

    Hi,
    I read this a few times now, and just when I think I got ......
    In your SubSequence you have a parameter which is called CAN_Switch_Channel_Name[] which is an array of strings.
    Now do you wish to change the Name of this string array from CAN_Switch_Channel_Name to CC_VS_Spd.CC_Set_Switch or is it that the contains of the array is set to eg
    CAN_Switch_Channel_Name[0] = "CAN_Switch_Channel_Name to CC_VS_Spd.CC_Set_Switch"
    and is this done in the Sequence or before the sequence ist called.
    Maybe a small example of what you are trying to achive, even if its not working may help.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • How to Pass the Criteria?

    Hi All,
    I am new to this SAP And BO environment. Now I have Designed a Report in Cryatal Report XI.
    I Want to Integrate the Report with SAP Enterprise Portal and I need to pass the criteria (Parameters) to Cryatal Report.
    Kindly Let me know Where i should design the criteria Screen and how to pass the Values to Crystal Report. Thanks for your support in advance.
    Thanks & Regards
    Sivaramakrishnan V

    Hello,
    first you have to configure your Portal and your BO Server correct that you can view Reports out of the Portal. Check the Installation Guide for the SAP integration Kit on How to do that.
    Than you could use an openDoc URL which is an URL where you call your Report with your Parameters directly. After creating this URL you could create an iView with this URL and deploy it in your Portal. Use this second Guide on How to create this URLs
    http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf
    Regrds
    -Seb.

  • In LV, using TS API, how do I specify the VI module for a Pass/Fail step?

    I am writing a LabView VI which will let a user write a TestStand sequence. Each step in the seq is the same type, a Pass/Fail test. I need to specify for each step the LabView VI module location, and an input buffer. I am having difficulty finding out how to specify the module for the step using the TestStand API in LabView. How to do this????

    Hi Drew,
    I think Dennis might have come at this from the wrong angle.
    Have a look at the example that ships with TestStand under
    \Examples\SequenceBuilderTool\LabVIEW
    This might give some clues, but I'd suggest posting this question over to the TestStand discussion Forum as suggested by Dennis.
    There'll be a few more people there who can help a bit more in-depth
    My personal suggestion is to create a custom step type that calls the .vi's and then you can create the steps in a new sequence file using your tool easily. This could be cumbersome for you if you already have a lot of steps setup.
    Better then to create a resource to get the steps out of to clone them by creating a sequence file which is full of your steps. When you have a handl
    e to a cloned step, you can change properties about it in memory, before putting it into the sequence (i.e. change it's name and stuff)
    Otherwise you need to get the type and create a new step of this type.
    If all you're stugling with is the module to call, then for the step you have a handle to, change the
    you can either change the "Step.TS.SData.ViPath" as a string (TestStand set property value String with a reference to the sequence_context) or if you wanted to bring up the specify module dialog, if you have a handle to the step itself, call the method SpecifyModule.
    Hope that helps
    Sacha.
    // it takes almost no time to rate an answer

  • How do i configure a FOR loop to have the behavior of the step Loop Type: Pass/Fail count?

    Hello,
    I'm using the Pass/Fail count set to one Pass to capture an event generated by my DUT.  I originally used a numerical compare step with the Looping type of Pass/Fail count to accomplish this.  Unfortunately the implementation changed and now I need to execute a few steps that can not be combined within one code module as before. Nor can these steps be put into a subroutine.  One of the steps executes a .NET asembly and I haven't figured out how to pass the reference to the subroutine.  When the subroutine is intered the reference is lost and the methode does not execute correctly.
    I have an evaluation function the exits the loop when the expected conditions are met. Everything works except for the Overall Pass/Fail result of the For loop.  If the loop exits due to the first numerical compare test passing, I want the loop overall execution to report as "Passed".  If the loop reaches it's predetermined number of iterations, the overall result needs to report as "Failed".  It would also be nice to have the radio button functionality of "Record Result of Each iteration".  Some conditions require a wait over a minute for the event to occur and I don't want to generate needless data for the report.
    Currently I get the pass/fail status for each For loop iteration, but only "Done" for each loop iteration.  I don't want the initial few failures to cause the test to fail.
    Does anyone know how to do this? Suggestions?
    Thanks,

    I have 2 steps in the loop that can not be combined into one step. This forces me to implement the behavior in some form of loop.  A While Loop could be an option.  I would need to pass the Step.Result.Status from the Multiple Numerical compaire step to the condition of the While Loop.  I tried to use the Step.TS.ID without success.  Some form of reference to the numerical compare step would be needed. I'm using a For Loop as I do want to limit the number of iterations of the loop.  In the case where the loop iterations are reached, the event I am trying to detect did not occur at the correct time and a failure needs to be reported.
    I came up with something based on my comments in the second post:
    1) To start with I configured a Locals.ForLoop_5 variable.  This is used to set the limit on the loop iterations and for comparison after the loop has finished executing. More on that later.
    2) The first step inside the loop invokes a method within a .NET assembly that has been packed in a DLL This method gets the required data from the DUT and stores it to a text file.
    3) The next step is the Multiple Numeric Limit step.  This step invokes a VI that extracts the data from the text file.  This step has been customized in several ways.
      i)  In Run Options, the Results Recording Option was disabled.  This prevents recording of "Failed" while the loop executes when waiting for the event to happen.
      ii) In Run Options, the Step Failure Causes Sequence Failure is unchecked.  Same reasoning as i)  These steps are not true failures.
      iii) A Post Action is configured to go to the nexxt step after the For Loop End step On Condition True with the logic of Step.Result.Status == "Passed".  This causes the loop to exit when the first "Passed" is encountered which corrolates with the event I'm trying to detect. On Conditon Fail remains set to default.
    4)  The step after the For Loop End is an expression step with everythin set to default except for the Status Expression logic set to: Locals.Loopindex < Locals.ForLoop_5 ? (Step.Result.Status = "Passed") : (Step.Result.Status = "Failed"). This step performs the overall Pass/Fail reporting for the For Loop.  If the number of loop iterations is less than the maximum it could have only gotten there by the previous logic triggered by the numerical compare passing, therefore "Passed".  If the loop index has reached the limit, then the event was not detected, therefore Failed.
    I have tested this work around with success, it just a pain to now have to implement this on my 40 some odd For Loops.
    If there is a better way, I'd still like to hear it.

  • When i do initial set up w creative cloud set uo wont run send error message"installer failed to initialize" why and how can i get pass this

    When I do initial set up with creative cloud set up it wont run a send error message "installer failed to initialize" comes up. Why and how can I get passed this?

    Error "Installer Failed to Initialize" | Install desktop application | Windows

  • How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

    How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

    Hi odedn,
    Thank you for posting in MSDN forum.
    Based on your issue, you mean that you want to copy the test plan with test results from the current team project
    to other team project, am I right?
    If yes, as far as I know that when we copy test plan with test results to other team proejcts. It is default that
    there just will not copy the test plan with test results (pass/fail) to other team project in MTM.
    You can refer the following MSDN document’s
    what gets cloned, it explained that which objects are copied from the source test plan to the destination test plan.
    Reference:
    http://msdn.microsoft.com/en-us/library/hh543843.aspx
    If you still want to this feature, I suggest you can
    submit this feature request:
    http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
    you submit this suggestion, I hope you could post that link here, I will help you vote it.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to Create a Workflow Criteria

    Hi,
    I am planing to create a workflow to assign some tickets to particular analyst.My requirement is more than one items in description should pass the criteria.
    Ex:
    Priority 3
    Ungency : Low
    Category : XYZ
    Sender :[email protected]
    All given examples are from the description and all should be pass the criteria then only incident should be assign to
    particular analyst.
    Thanks in advance.

    Could you please check the workflow status: SCSM console -> Administration -> Workflows -> Status -> Name of your workflow.
    Is the workflow triggered and ran in an issue/error? Is the workflow not started?
    Also you can run a SQL query on the Servicemanager database (You have to modify the
    'DOMAIN\WORKFLOW_ACCOUNT' before you run the SQL query):
    select
    job.TimeScheduled,
    job.TimeStarted,
    job.TimeFinished,
    job.ErrorCode,
    job.ErrorMessage,
    convert(xml,job.Output),
    job.Status,
    Disp.DisplayName from JobStatusView Job
    join DisplayStringView Disp
    on job.TaskId = disp.LTStringId
    where SubmittedBy = 'DOMAIN\WORKFLOW_ACCOUNT' and disp.LanguageCode = 'enu'
    order by TimeScheduled desc
    Andreas Baumgarten | H&D International Group

  • How to create a buffer  by passing  a just polygonpopints  as a parameter

    hi ,
    this query about oracle spatial...
    please tell me how to create a buffer around a single polygon data.. by passing single polygon co-ordinates as a
    parameter..
    ex: for a point the following works..
    select * from TEMIS where SDO_INSIDE(TEMIS.GEOMETRY ,SDO_GEOM.SDO_BUFFER(SDO_GEOMETRY(2001,32643 ,SDO_POINT_TYPE(70.21931,10.32379,NULL),NULL,NULL),10,0.00000005,'UNIT=KM') )='TRUE'
    i want it for a plygon data
    iam using oracle 11g version
    Edited by: user13340372 on Jun 29, 2010 11:15 PM
    Edited by: user13340372 on Jun 29, 2010 11:16 PM

    Welcome to the SQL and PL/SQL forum.
    It would be helpful to us if you post:
    - your database version
    - an example of what you want, a small dataset to work with in the form of CREATE TABLE + INSERT statements ideally and the results you want from that.
    ¿What are polygonpopints?
    Related to http://en.wikipedia.org/wiki/Point_in_polygon perhaps?
    If your question is Oracle Spatial related, then please refer to the Spatial Forum @ Spatial

  • HT201394 I just updated my iPhone 4s to iso 8.2  How do I create a pass code to open my phone without using my password every time?

    I just updated my iPhone 4s to iso 8.2  How do I create a pass code to open my phone without using my pass word every time?

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • WAD - How to create the variables to have the selection criteria

    Hi all,
      I am trying to display a BW Statistics query in 'Chart' with Web Application Designer (WAD). I want to have the selection criteria with variable USER ID ('ABC123'), Info Cube ('Z_FIGL_C01') and Time Period '01/01/2005' to '12/31/2005'. How can I have this selection criteria in Web Application Designer, PLEASE ?.
    Thanks.

    Venkat,
      Yes, It's possible.
       I think in the menu options.. there tools--> create Table(it's not Table Web Item web item). May be similar option. we need to create the Table. Right now i don't have the system. you need to keep the 2 Drop Down Boxes in the Table(in the 2 coloumns).
    All the best.
    Regards,
    Nagesh Ganisetti.

Maybe you are looking for