Using a popup and PASS/FAIL Criteria

How do you use a popup to query the user for PASS/FAIL criteria? I have an LED ON/OFF. Want to use POPUP to ask user condition. If LED is in an incorrect state, seq fails. Want to allow user 2nd chance in case wrong button is hit the 1st time.

Look at the attached seq, and the Post Expression and Status Expression of Test1. Do the same for Test2 and Test3, but change the logic to make button 2 pass for testing LED off. Do you really want to have a terminate action in your Post Action? This causes an incomplete test without a pass/fail indication. Instead, set pass/fail like in Test1. If you want to abort the rest of the test, put a Goto End in your Post Action instead of Terminate.
BTW, Mr. Eastwood, can I have your autograph?
- tbob
Inventor of the WORM Global
Attachments:
led_tests_on_off[3_0].seq ‏25 KB

Similar Messages

Problem when using WEB.SHOW_DOCUMENT and passing in lexical parameter

Hi,
I got a blank page with error "An error has occured while trying to use this document" when I tried to use web.show_document and passing a lexical parameter to 10g report on 10gAS. The URL in the web.show_document is:
http://<srvname>:<portnum>/reports/rwservlet?server=repserver90&report=myrpt.rdf&destype=Cache&desformat=pdf&userid=<usr>/<pw>@<db>&where_clause=where%20product_type%20in%20('REPORT')
If I change the desformat to htmlcss, it is fine to display the report. But doesn't work with desformat=pdf. The pdf file has been generated in the cache. Why can't it display on the screen.
Also I tried to use double quote the value for where_clause. The pdf report showed up. But it ignored the where clause.
Experts please help.
Ying

I use lexical parameters and they work fine, but I use a parameter list. The code is contained in a form that is called by all forms that wish to run a report. This way you only need the logic for printing in a single form. If you want the form, email me at [email protected]

How to create a pass fail criteria

After visually analyzing a particle i.e. its area I need to decide if the particle passes or fails the inspections. How do I create a pass fail criteria after "Particle Analysis" in LabView? Thanks

Here is a VI that will demonstrate what you might consider doing.OH buy the way the guy I was talking about is doing research now at UC davis. I hope this will help you out. I would also be interested in other comments as well.
Joe
Joe.
"NOTHING IS EVER EASY"
Attachments:
pass_fail_crit_with_array.vi ‏46 KB

Using Hibernate Functionality and pass it on to the JCAPS Oracle eWay

Hi All,
I need to use the Existing Hibernate API's and pass it on to the JCAPS oracle eWay to persist the Data.
As the present Application is using the Hibernate for persisting the Data as we have parent child relation with multiple tables , so we need to push the whole thing in to JCAPS.
Thanks & regards
Srikanth

narayanaa wrote:
Hi,
You cannot use hibernate using oracle or any other database eWays. If you want to leverage the same or the existing code you have for the Data Access you use JCD.
So what you can do is have the required jars available for the application and then use the available classes with in the JCD.
Thanks,
NarayanaaI don't think that is secesarily true. You can use oracle eWay to handle the database connection, pooling and XA transactions. You just retrieve the java.sql.Connection object from the eWay and use that in you hibernate code.
-Mario

JS popup and passing URL variables or ?

Hi ...
The following JS script opens a new window and that window is
a template called "viewer.cfm". The images are all going to shown
in that template (viewer.cfm) ... eg: HPIM0877.JPG, HPIM1009.JPG
I have to pass variables from any pages that have the
following link (below) to "viewer.cfm".
I will have maybe 40 images to deal with but I am getting
stuck on a universal #variable# to display the images and passing
them.
I have not included any code on the receiving template
"viewer.cfm" as I am a little stuck.
Thanks ...
EXAMPLE
<cfoutput><A HREF="javascript:void(0)"
onclick="window.open('viewer.cfm?#HPIM0877.JPG#',
'welcome','width=580,height=440,menubar=no,status=no')">
courses</A></cfoutput>

On the template with the JS pop up window. (index.cfm)
<cfset
peaks="/motorcoach/ca/images/popup/HPIM1070.JPG">
<cfoutput><A HREF="javascript:void(0)"
onclick="window.open('viewer.cfm?image=#peaks#',
'welcome','width=650,height=500,menubar=no,status=no')">
peaks</A></cfoutput>
On the template which will produce the image (viewer.cfm)
<cfparam name="url.image" default="0">
<cfoutput><IMG SRC="#url.image#" width="550"
height="413" class="image"></cfoutput>
Cheers

HT3275 I am backing up my iMac using TIME MACHINE and red FAILED occured stating "unable to complete back up. an error acccured while creating back up folder" can anybody help me pls. =Mochincess

Backing up Problem: Using time Machine to back up my iMac, and failed occured stating" unable to complete backup. An error occured while creating backup folder. Pls. help....using reformatted WD 2TB Passport

Hello...
https://discussions.apple.com/thread/4413173?start=0&tstart=0

How to get sequence name and pass/fail status?

HI,
I need your assistance in order to achieve the following goal:
I have about 10 sub-sequence steps in the main sequence.
For those steps only, I'd like to print out in a window the name of the sequence and the resutl.
I meet dificulties since i have the sub-seq result, only after it ends. It means that i can print its status only in the following step.
is there a way around it?
I wish to be able to write all this information in the clean up of the sub-seq step.
Thanks
Rafi

Hi Rafi,
You will not be able to print the result of a subsequence call in the same step as the subsequence call, because both post-step substeps and post-expressions are run before the status is evaluated. As you mentioned, you can do this in the following step, or you can use the SequenceFilePostStep callback to specify some customized behavior to follow your sequence call steps. This callback will run after every step, so you would have to put some extra logic into this callback if you are using multiple step types.
So, are you trying to print the result of each subsequence call separately? How do you intend to display the status? Let me know if you have any other questions about how to implement this.
Regards,
Marty H.
National Instruments

I tried to use Battery updater and it failed, now it starts up on my computer boot up evrytime and fails everytime, how do you turn it off or get it to work?

I tried to use the Battery updater software on my Powerbook G4 and it didn't work, now it starts up on my computer startup everytime, how do you get it to work or turn it off?

It's possible that your model PowerBook doesn't need the updater.
Did Software Update offer you the Updater, or did you download it from Apple? This article"
http://support.apple.com/kb/HT2339
has a list of the specific Mac models requiring the update and how to tell if you have one of those models--if yours is not among them, the updater shouldn't run.

Copy site using "Site Contenct and Structure" fails

Hello
As as site administrator I'm trying to copy a site in a subsite to another subsite, but it fails with a stacktrace. The site is not copied.
I open the "Site Contenct a Struture" menu, I can see the site hierarchy, I locate the site, a drop down menu opens on the site in question, I choose "Copy" and find the target site to copy the source to. The process starts, but fails
with a stack trace:
<error><message></message><full>Microsoft.SharePoint.SPException
---> Microsoft.SharePoint.SPException --->
System.Runtime.InteropServices.COMException (0x80131904):
<nativehr>0x80131904</nativehr><nativestack></nativestack>
at
Microsoft.SharePoint.Library.SPRequestInternalClass.CreateListOnImport(String
bstrUrl, Guid& pguidListId, String bstrTitle, String bstrDescription,
Int32 lTemplateID, String bstrFeatureId, Guid guidRootFolderId, Int64 llFlags,
Int32 iVersion, Int32 iAuthor, String bstrFields, String bstrContentTypes,
String bstrImageUrl, String bstrEventSinkAssembly, String bstrEventSinkClass,
String bstrEventSinkData, Guid guidDocTemplateId, String bstrViews, String
bstrForms, Boolean bCompressedSchema, DateTime dtTimeCreated) at
Microsoft.SharePoint.Library.SPRequest.CreateListOnImport(String bstrUrl,
Guid& pguidListId, String bstrTitle, String bstrDescription, Int32
lTemplateID, String bstrFeatureId, Guid guidRootFolderId, Int64 llFlags, Int32
iVersion, Int32 iAuthor, String bstrFields, String bstrContentTypes, String
bstrImageUrl, String bstrEventSinkAssembly, String bstrEventSinkClass, String
bstrEventSinkData, Guid guidDocTemplateId, String bstrViews, String bstrForms,
Boolean bCompressedSchema, DateTime dtTimeCreated) --- End of inner exception
stack trace --- at
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) at
Microsoft.SharePoint.Library.SPRequest.CreateListOnImport(String bstrUrl,
Guid& pguidListId, String bstrTitle, String bstrDescription, Int32
lTemplateID, String bstrFeatureId, Guid guidRootFolderId, Int64 llFlags, Int32
iVersion, Int32 iAuthor, String bstrFields, String bstrContentTypes, String
bstrImageUrl, String bstrEventSinkAssembly, String bstrEventSinkClass, String
bstrEventSinkData, Guid guidDocTemplateId, String bstrViews, String bstrForms,
Boolean bCompressedSchema, DateTime dtTimeCreated) at
Microsoft.SharePoint.Deployment.ListSerializer.CreateList(SPWeb parentWeb,
Dictionary`2 listMetaData, Boolean usingPublicSchema) at
Microsoft.SharePoint.Deployment.ListSerializer.SetObjectData(Object obj,
SerializationInfo info, StreamingContext context, ISurrogateSelector selector)
at Microsoft.SharePoint.Deployment.XmlFormatter.CallSetObjectData(Object obj,
SerializationInfo objectData, ISerializationSurrogate surrogate,
ISurrogateSelector selector) at
Microsoft.SharePoint.Deployment.XmlFormatter.ParseObject(Type objectType,
Boolean isChildObject) at
Microsoft.SharePoint.Deployment.XmlFormatter.DeserializeObject(Type objectType,
Boolean isChildObject, DeploymentObject envelope) at
Microsoft.SharePoint.Deployment.XmlFormatter.Deserialize(Stream
serializationStream) at Microsoft.SharePoint.Deployment.ObjectSerializer.Deserialize(Stream
serializationStream) at
Microsoft.SharePoint.Deployment.SPImport.DeserializeObjects() at
Microsoft.SharePoint.Deployment.SPImport.Run() at
Microsoft.SharePoint.Publishing.Internal.DeploymentWrapper.Copy(String[]
sourceSmtObjectIds, String destSmtObjectId) --- End of inner exception stack
trace --- at
Microsoft.SharePoint.Publishing.Internal.DeploymentWrapper.Copy(String[]
sourceSmtObjectIds, String destSmtObjectId) at
Microsoft.SharePoint.Publishing.Internal.WebControls.CopyObjects.Copy()</full><customData>Operation
to Copy '/Reports/Other/QA140' to
'/Reports/RepMaritimeOperations'
failed</customData></error>
In the event log I find this:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (49088ef3-bf0a-455d-9134-63a4913fe869).
Reason: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was updated by abc\spservice, in the OWSTIMER (7796) process, on machine BLA01. View the tracing log for more information about the
conflict.
Technical Support Details:
Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was updated by HURTIGRUTEN\spservice, in the OWSTIMER (7796) process, on machine
BLA01. View the tracing log for more information about the conflict.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
If the root cause is somewhere in the direction of what the Windows Event log says, then I found this article, but I'm not sure.
http://www.social-point.com/sharepoint-2010-event-id-6482-application-server-administration-job-failed-for-service-instance-microsoft-office-server-search-administration-searchserviceinstance
Any advice?
Thanks.
Henrik Fyhn http://repeatableread.blogspot.com/

Hi Henrik,
According to the error you encountered, please check if you enable usage data collection. If not, please enable it, then Restart IIS and SharePoint Timer job and then check if the error disappear. If its enabled already and still these IDs are logged into
event viewer, then disable that first, Restart IIS and SharePoint Timer job, enable them and Restart IIS and SharePoint Timer job again.
To enable the Usage Data Collection navigate Central Administration >> Monitoring >> Configure usage and health data collection >> Under Usage Data Collection check the box>> Under Health Data Collection check the Enable health data
collection box.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

Hi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!

Pass/fail status (UUT Result) of my main sequence

I would like to have my last step in my test sequence to be a DLL passing to my SQL database a part number, a serial number from “RunState.Caller.Locals.UUT.SerialNumber” and Pass/Fail status of my Test Sequence.
Can I pass pass/fail status of my test sequence to my DLL before execution is completed?
Thank you,
Henry
Solved!
Go to Solution.

Access Pass/Fail status by using RunState.SequenceFailed. It will be True if the test failed.
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Sequence call with Pass/Fail Test always returns Passed result

In TestStand 2.0, I use Sequence Adapter with Pass/Fail Test step to call a subsequence, I always receive a Passed result, even as I force fail a step in the subsequence and enabled the Step Failure Causes Sequence Failure option.
Attachments:
Example1.seq ‏17 KB

Tan -
The status expression for the Pass/Fail step type does not look to see if the status has been previously set by the code module in this case the sequence call.
Step.DataSource != "Step.Result.PassFail" ?
Step.Result.PassFail = Evaluate(Step.DataSource) :
False, Step.Result.PassFail ? "Passed" : "Failed"
It just set it to Passed or Failed even if the status is already "Failed".
You could either,
1) Change the Pass/Fail expression to the following for the step,
Step.Result.Status == "Done"? Step.Result.PassFail : False
or
2) Use two steps, a Sequence Call and a Pass/Fail that uses the None Adapter. The Pass/Fail could operate on the previous step if necessary.
Scott Richardson - NI"
Scott Richardson
National Instruments

Bidirectional binding and passing data.

I started learning Flex and I have couple of problem of which I can't see a clear solution.
Flex 4 has two way binding, but how can I use it with data type different from strings? I receive from a web service dates and numbers, let the user edit them and send them back to the web service. Flex 4 code generator created all the necessary objects, that contain numers and dates types. Presenting them to the user in text fields (or date fields) is easy, but I can't get such a simple way to send them back. When I try two way binding it gives compilation error because it think I'm trying to force a cast from String to Number or Date. If I understand correctly, the only way to get the data back to the web service is:
Introduce validators for Numbers and Dates
For each of the form element, check if it is valid
If all of them are valid, convert them manually to the appropriate type
Populate back the original object with new values (and then send it to the web service)
Is there a smarter way to let the two way binding work the way is meant to be? Is there some way to set the converter to use when binding back from String to Number?
By the way, is there some simple way to ask a Form object that all the contained fields are valid?
The second problem regards passing data among different views: is there a standard way in Flex to "share" data between different mxml files? I have two scenarios:
A view (mxml file) uses a lot of components (other mxml files, that may include other components as well). There are a few objects, mostly data container, that I'd like to use in most of this hierarchy. Which is the best way to share these objects? Do I have to set something static in the root view and have all the other components access them statically? Or do I have to write setters in all the components in the hierarchy and pass all the objects down the hierarchy? Is there a quick way to set up a sort of "session" for this hierarchy and access it?
A view (mxml file) presents a list of results. Selecting/clicking on one of the results the user goes to another view (mxml file, may be a module), but in the new view I need a reference to the data the user selected in the previous view. The first solution here seems to be using an event and passing the data with it, but is there any other way? I'm looking for something that can cover both this and the previous case.
Any suggestion is welcome. Sorry if the question was already posted but I didn't find any clear answer.

This works as expected for me: I see the text "invalid" any time a change occurs to the text in the text field that causes the value of the DoubleProperty to change.
E.g.:
Select the default value (42.0); press a non-numeric key to change the text. The invalidation listener is invoked.
Delete the text. The invalidation listener is not invoked (the text is now "", which causes a NumberFormatException, the double property is "set" to zero, which is no change so there is no notification).
Enter 0. There is no notification (the value of the DoubleProperty has not changed).
Enter a non-zero numeric value. The invalidation listener is notified.
Change to zero. The invalidation listener is notified
Change to non-numeric text. The invalidation listener is not notified (the value of the DoubleProperty has not changed).
If you're expecting the text to update to zero when non-numeric text is input: I guess the implementation is something like
if (! converter.fromString(text).equals(value)) {
// updateText
in the binding's method that listens for changes in the DoubleProperty. This is similar to not seeing "1.0" appear in the text field when you type "1"; or "123.0" appearing when you type "0123", etc.

I am trying to use the T. S. operator interface I need to add pass fail and error

Hello:
I am using Labview 6.1 and Test Stand 2.0
I have made some modification to a copy of the T.S. Labview operator interface. How do I get the pass/fail or error from test stand to be pass to LabView so I can tell the operator that the unit pass or fail the test. I do not want to use the Test UUTs. I want this to be very low operator response.
Message Edited by Toro on 02-28-2006 01:52 PM

Not sure if this is available in the earlier versions of TestStand, but I think so.
You could post a UI Message, from your execution entry point in the process model, to your User Interface indicating the pass/fail/error status when a test run is complete. You will need to handle the UI Message in your Operator Interface. See TestStand II Customisation course notes for handling UI Messages.
The data passed in the UI Message can be anything you like, the UI Message handler in the User Interface will have to process the message and update the display as required.
Hope this helps
Steve
Message Edited by SercoSteve on 03-01-2006 10:02 AM
There are 10 types of people in the world that understand binary, those that do and those that don't.

Pass/Fail issue with Quiz and Click Buttons

Got a complicated one for ya!
I have a project that has about 100 quiz questions. I want to add slides with an image for backgrownd, a voice over and a "Click Button" to be used like a Simulation. If the "Click Button" is not clicked on, I want the slide to act like a Quiz and be marked as wrong.
At the end of the Quiz I want the Pass/Fail function to be: If Pass: "Continue" then if Fail "Jump to Slide". This Failed Slide would jump to the last slide; the end of the project with a "Thank you". If Passed, the project continues to display more information on other slides.
The tests I have done the Pass/Fail seems to not be working. If failed, the project continues just like the Passed even though the "Pass/Fail" options are marked correctly.
What do you think?

Also check the options under Quiz > Settings > Required. It could be that you have it set to something other than Optional which might be restricting things.

Using a popup and PASS/FAIL Criteria

Similar Messages

Maybe you are looking for