How to create a selection or mask from a Selective Color layer
Hi. I was wondering if it is possible to get a selection/mask out of a Selective Color Layer.
For instance lets say I have a complicated photo and I put a Selective Color layer on. I then pick Red and start adjusting. I can see the effect and how it changes the red and how it falls off in the photo. Is it at all possible to create a selection or a mask based off of that effect?
Thank you
You can try this. Once you get your selective color adjustment layer the way you like it, change it's blending mode to difference. Add a B&W adjustment layer above that then a curves or levels adjustment layer above that. Use the curves or levels adjustment layer to give the image more contrast by adjusting the top white values. This will produce an image that you can then make a selection from from the channel pallet.
Similar Messages
-
How to create a group of contact from a multi-selection of mails in a mailbox to answer to all senders?
Use Mail Scripts. Its Add Addresses function will collect all the addresses from all selected messages and allow you to select the ones you want to add and allow you to create groups as you go.
-
How to create automatic creation of BP from customer and vendor master data
Hi gurus,
can any one tell how to create automatic creation of BP from customer and vendor master data.
Please give me the steps.
Thanks
Sasikanth.HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini -
How to create a interface with NTR from SAP XI?
How to create a interface with NTR from SAP XI?
Hi,
What do you mean by NTR ?...
What are the details you needed...Please be clear and more elaborative as far as possible..so that you will get straight forward answers...
HTH
Rajesh -
How to create ArrayColletion in mx:Script from mx:Model id="results" source="/data/data.xml" /
How to create ArrayColletion in mx:Script from <mx:Model
id="results" source="/data/data.xml" />
Please see my code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Model id="results" source="/data/data.xml" />
<mx:Script>
import mx.collections.ArrayCollection;
import mx.utils.ArrayUtil;
import mx.controls.Alert;
</mx:Script>
<mx:ArrayCollection id ="dt1"
source="{ArrayUtil.toArray(results.result)}"/>
<mx:Script><![CDATA[
[Bindable]
public var expenses:ArrayCollection = dt1;
[Bindable]
public var expenses2:ArrayCollection = dt1;
[Bindable]
public var dp:ArrayCollection=expenses;
public function changeDataProvider():void{
Alert.show(expenses.toString());
if (dp==expenses){
dp=expenses2;
}else{
dp=expenses;
]]></mx:Script>
<mx:Panel x="10" y="10" width="100%" height="378"
layout="absolute">
<mx:ColumnChart dataProvider="{dt1}" x="10" y="10"
id="myChart" height="318" width="100%">
<mx:horizontalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:horizontalAxis>
<mx:series>
<mx:ColumnSeries displayName="apple" yField="apple"/>
<mx:ColumnSeries displayName="orange"
yField="orange"/>
<mx:ColumnSeries displayName="banana"
yField="banana"/>
</mx:series>
</mx:ColumnChart>
<mx:Legend dataProvider="{myChart}" x="481" y="10"/>
</mx:Panel>
<mx:Button x="284" y="416" label="Change Data" id="bt"
click="changeDataProvider()" />
</mx:Application>Tracy,
Thanks. That worked. However I have another related question:
I convert the xml feed to a XMLListCollection by doing:
<mx:XMLListCollection id="mission"
source="{xmlFeed.lastResult.day}"/>
and
<mx:XMLListCollection id="mission1"
source="{xmlFeed.lastResult.day.tBlock}"/>
On the chart I have
<mx:ColumnChart id="missionReadiness" height="150%"
width="100%"
paddingLeft="2" paddingRight="2"
showDataTips="true" dataProvider="{mission1}">
<mx:series>
<mx:ColumnSeries xField="" yField="@today"
displayName="Today"/>
<mx:ColumnSeries xField="" yField="@tomorrow"
displayName="Tomorrow"/>
<mx:ColumnSeries xField="" yField="@afterT"
displayName="After Tomorrow"/>
</mx:series>
</mx:ColumnChart>
the yField works, but for the xField I want to have the @date
but refers to the parent node, so I am clueless on how to refer to
it.
Also, I would like to display on the chart only the values to
a specific date (like @date="05/17/2007").
Any suggestions on how to do that?
Gilbert -
How to create a multi column list item and select these values from a LOV
Hi all,
My requirements are:
1) create an LOV which holds the productno, productname and productprice fields (this is working)
2) at run time, select one record from LOV and populate the list/grid with this selected record values of productno, productname and productprice fields, so we are showing them on the form in the form of a table/grid (not working)
3) be able to select multiple records from LOV and be able to populate the list item with multiple records (not working)
4) have two more columns in the list/grid, for productquatity and total price (not wokring)
Please help me.
how can i create this grid or list in oracle
whats the possible way of acheiving this in oracleIf you use a list item to display multiple columns then you'll need to use a fixed-width font. You can achieve a similar look with proportional fonts by using a normal block and setting the fields' bevel to 'None'.
Each column in the LOV has a Return Item property (under Column Mapping Properties). Set this to a :block.item reference for each column to bring the data back into those referenced fields.
You can't select multiple records from an LOV. For this you will need to create your own form. Check the help for system.mouse_button_modifiers to see how to respond to Ctrl+click and Shift+click.
To add columns just modify the LOV's record group's query. -
How to create a 4 page pdf from images - each page should open at same size
How do I create a 4 page pdf (from 4 images - all the same size) that opens each page at full page size?
Thank you so much.
Ginger
PREVIOUS MSG:
My goal is to create multi page pdfs that are created from images (scans of old brochures). I receive images (scans of pages) all at the same size.
I have been able to create the 4 pdfs (each opens at full page size) and merge into 1 pdf. When I open that final pdf, I see a column of 4 pages, page 1 image being larger than the remaining 3. When I click on the left, page 1, icon, I get the full page. When I click on icons for pages 2 - 4, I get nothing. The only way I can get the other pages in a full page view is to adjust the scaling after left icon is selected. That is not what I want.
How I created the files.
I can either create pdf pages using Photoshop, or using Acrobat Pro itself through:
File> Create PDF> From File and adding each of the images. I then, for each, choose Properties> Initial View> Fit Page> Save. Then I use File> Combine> Merge Files into Single PDF> Save.
Then I open the multi page pdf.
I appreciate any help.
Thank you,
Ginger
PREVIOUS MSIt seems to me what you want to do is create one document which a combination of all four and then one page of each.
To create a Document with 4 pages combined in to one PDF. open the first in a Series the to Edit menu and click on add pages click on next document (browse to document first) the choose attach to to end of document or add to end of document. Repeat until you get all images added. They will end up (or should ) center in center of their own page. Save this document with a new name for now.
Next go back to Photo shop and reduce size of images to fit desired sheet of paper (8-1/2 by 11, 8-1/2 by 14, whatever) place them side by side and row by row so you have 4 images on one page.
now save as Pdf.
now decide which you want to swap to the Thumbnails (the 4 on one page, or 4 individual pages. I would use the thumbnails and make each a button that references the page in the document you save as a 4 page pdf that applies.
Then on that page write a line saying click each illustration to see full size image (you might have to write this line while in Photoshop) then save this as PDF file
Try out. You might have to use some javascript controls to do this. But I am not experienced in JavaScript to do this. I'm sure it cane be done.
But note you will have to save both documents with the Thumbnails and the four page and Thumbnail page in a folder and send to prospect
If you want just four separate pages in one Pdf just do first two paragraphs above -
How to create a report in EM from scratch level ?
Hi,
Can anybody help me on this ?
The report I want to create in EM is about where the user selects a target from a drop down and it shows the CPU utilization or memory Utilization for that respective target. Is it possible to create such kind of ? If Yes, How to create the report ?
Thanks in advance.Are you sure you want to create a report for this info?
As CPU and MEM utilization changes every second, what would be the use of a report?
I assume you are aware of the fact that CPU and MEM utilization is included for instance in the Host Homepage and can also be included in Group Pages and Dashboards.
Regards
Rob
For more information on OEM GC, like Tips and Tricks please see: http://oemgc.wordpress.com -
FB60, How to exclude a G/L account from being selected ?
This is a continuation of a previous thread that was closed by accident!!
The original question hasnu2019t been answered yet.
Question
=======
I am in need to EXCLUDE a specific G/L account from being selected, from the drop down list, when executing FB60 (Enter Vendor Invoice) to create a new vendor invoice ?
1) Is this doable ?
2) Could this be done programmatically (ABAP team) ?
3) Could this be done at Security Role level (Basis & Security ABAP team) by using the field BRGRU of the F_BKPF_BES Authorization Object ?
I have received so far very useful remarks from Paul01, Mauri, SAPFICO, Mohammed Zia, and Sudhaker Gogula.
THANK YOU ALL!
Here are my answers to each one:
To Mauri:
========
YES, we define the authorization Group via FS00 --> Control data, which means the relevant authorization object will be F_BKPF_BES.
As I said earlier, the corresponding field will be BRGRU and and not BEGRU.
Then the question is, WHICIH AUTHORIZATION GROUP DO I SET, for the value of BRGRU, there are thousands !!
To Mohammed
============
How do I "block that GL account for postings in GL master record" ??
Programmatically (ABAP) or via Security Role(s) ?
To Sudhaker
=========
Could you please elaborate the solution USE VALIDATION.
I am not familiar with that!
Is it something that ABAPers do ?
Could something be done by using Authorization Groups // Authorization Objects ?
Thank you all, in advance for your comments/ideas/solutions!
Best regards,
TomDear Tom,
if You insert an authorization Group into FS00 then You should create a role by transaction PFCG to link to Your user.
Then You have to link to this role the transactions You want the user to use and into the Authorization TAB, You have to insert the relevant intervals of Authorization group, excluding the one to which the user cannot post to:
Changed Accounting Document: Account Authorization for G/L Accounts
Maintained Accounting Document: Account Authorization for G/L Accounts
Activity Create or generate
Authorization Group HERE!!!!!!
Then You have to save and to generate.
Anyway the easier way, in my opinion, is to build up a validation by OB28 at line item (call up point 2) and define an error
message in case the use should use the G/L Account in question.
example:
Prerequisite
BKPF-BUKRS = 'MAO1' AND SYST-TCODE = 'FB60'
Check
BSEG-HKONT = '160000'
Message
Message type E Message class Z1
Message number 032
Message text Please don't use the G/L account 160000
I hope this can help You.
Mauri -
How to create PDF without embedded fonts from Indesign
Can anyone tell me how to create from Indesign a PDF that certainly does not contain any fonts I don't want to include? But that would appear in the same layout in a substituted font, including italics and small caps?
You can't, InDesign will embed the fonts for you.
To unembed fonts you need Acrobat Professional. Go to Tools>Print Production>Pdf Optimiser
go to Fonts
And select the fonts to unembed.
You could select any text and change the Transparency to 99.9%.
Then in Edit>Transparency Flattener make a new one using High as a base for the new
Select Convert Text to Outlines.
When you Export to pdf, choose Adobe PDF 1.3, and go to Flattening, choose the new Flattener Preset that you just made.
And when you export it, any text forced through the Flattener will be converted to outlines. (this could violate the terms of the Font Licencing.) -
How to create a vertical bar chart from a table? (PHP, HTML and CSS)
Hi everyone,
I have created a table and wish to proceed to do it even better in terms of analysis pattern. I want
to create a vertical bar chart from the created table but I dunno how to start it.
Here is the code for the table:
<?php
$gpa11=$_REQUEST['gpa11'];
$gpa12=$_REQUEST['gpa12'];
$gpa21=$_REQUEST['gpa21'];
$gpa22=$_REQUEST['gpa22'];
$gpa31=$_REQUEST['gpa31'];
$gpa32=$_REQUEST['gpa32'];
$gpa41=$_REQUEST['gpa41'];
$gpa42=$_REQUEST['gpa42'];
$gpa51=$_REQUEST['gpa51'];
$gpa52=$_REQUEST['gpa52'];
?>
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=1024">
<title>Feng Mentor Mentee</title>
</head>
<body>
<div id="wrapper">
<div class="chart">
<h3>GPA Performance Graph</h3>
<table id="data-table" border="1" cellpadding="10" cellspacing="0"
summary="The performance of students throughout the years in university">
<thead>
<tr>
<td> </td>
<th scope="col">Year 1</th>
<th scope="col">Year 2</th>
<th scope="col">Year 3</th>
<th scope="col">Year 4</th>
<th scope="col">Year 5</th>
</tr>
</thead>
<tbody>
<tr>
<th scope="row">Sem 1</th>
<td><?php echo $gpa11;?></td>
<td><?php echo $gpa21;?></td>
<td><?php echo $gpa31;?></td>
<td><?php echo $gpa41;?></td>
<td><?php echo $gpa51;?></td>
</tr>
<tr>
<th scope="row">Sem 2</th>
<td><?php echo $gpa12;?></td>
<td><?php echo $gpa22;?></td>
<td><?php echo $gpa32;?></td>
<td><?php echo $gpa42;?></td>
<td><?php echo $gpa52;?></td>
</tr>
</tbody>
</table>
</div>
</div>
</body>
</html>
Here's the look:
GPA Performance Graph
Year 1
Year 2
Year 3
Year 4
Year 5
Sem 1
Sem 2
Please help me on this because this is my 1st project on php.Hi
Are you using BI query? If yes then follow the steps -
1. Take Sales org in rows of BI query. & take invoice type & Key figure in Columns.
2. In VC use this query & drag chart from the output of this query.
3. Right click on chart & go to 'Configure Element'. There select Chart Type as 'Bar chart'
4. Below that you will get default option as clustered, there you select 'Stacked'
5. Create Data series as per your requirement.
6. Arrange proper layout of the model & then deploy.
You will get required output in stacked format.
Regards
Sandeep -
How to create an Undefined Code Combination from API? (Urgent)
Hi All,
I used the following API to create the code combinations in a Inventory custom form.
SELECT CHART_OF_ACCOUNTS_ID INTO :PARAMETER.CHART_OF_ACCOUNTS_ID
FROM ORG_ORGANIZATION_DEFINITIONS
WHERE ORGANIZATION_ID = :PARAMETER.ORG_ID;
FND_KEY_FLEX.DEFINE(
BLOCK => 'XX_MRN_TRX_HEADERS',
FIELD => 'TO_ACCOUNT',
CODE => 'GL#',
APPL_SHORT_NAME =>'SQLGL',
NUM => ':PARAMETER.CHART_OF_ACCOUNTS_ID',
ID => 'TO_ACCOUNT_ID',
VRULE => '\\nSUMMARY_FLAG\\nI\\nAPPL=SQLGL;NAME=GL_NO_PARENT_SEGMENT_ALLOWED\\nN\\0GL_GLOBAL\\nDETAIL_POSTING_ALLOWED\\nE\\nAPPL=INV;NAME=INV_VRULE_POSTING
nN',
REQUIRED => 'N',
DINSERT => 'Y',
VALIDATE => 'FULL',
USEDBFLDS => 'N');
This creates the correct ccid if the combination is already available in GL (gl_code_combinations_kfv), But when its a new combination it returns '-1'.
How can I create an Undefined Code Combination from API in custom forms?
If any one one can help me on this it'll be a great help.
ThanksSolved by Using FND_FLEX_EXT.GET_COMBINATION_ID.
Thanks -
How to create bootable USB thumb drive from Lion on Mac Mini 2011?
Hello folks
Yesterday my new Mac Mini (Core i7 2,7 Ghz, 4 GB RAM, ATI Radeon HD6630M 256 MB) arrived. It replaces my old Mac Mini (Core Duo 1,83 Ghz, 2 GB RAM, Intel GMA950 64 MB). One day I'll replace the 500 GB 5400 RPM HDD in this Mini by an Intel SSD drive (just like I did with my previous Mini). I'll do a fully clean install then (formatting the SSD drive in Disk Utility and then installing Lion on it from a bootable USB thumb drive). The only problem is I can't seem to download Lion for free from the Mac AppStore (MAS) although I have bought a new Mac Mini which came with Lion pre-installed. I know how to create a bootable USB thumb drive with Lion on it when you download it from the MAS. But that's the problem... I can't seem to download Lion from the MAS for free. When I open the MAS while holding down the Option key I can download Lion but it will charge me for it. Is there any way I can download Lion from the MAS without paying for it? Since it already came with my new Mac Mini 2011 this should be possible I guess?
And will I still be able to download the iLife '11 apps (iPhoto, iMovie and Garageband) for FREE that came with my new Mac Mini when I do a fully clean install as described above? Thanks in advance.
Greetings
JocauAfter doing some research, it seems that there are only 2 WAYS to do a complete reinstall of Lion on the Mac Mini 2011 without paying for the Lion download in the Mac AppStore (i.e. recreating every partition, also the Recovery HD partition, from scratch e.g. when installing Lion on a clean HDD/SSD).
1) COMPLETELY clone the Mac Mini 2011 HDD including all of its partitions to an external drive and restore it when you want to do a complete reinstall.
2) Use the LION INTERNET RECOVERY feature built-in into new Macs that ship with Lion (this feature is present in new Macs starting from the Mac Mini 2011 and Macbook Air 2011).
OS X Lion: About Lion Recovery
Lion Internet Recovery
If you happen to encounter a situation in which you cannot start from the Recovery HD, such as your hard drive stopped responding or you installed a new hard drive without Mac OS X installed, new Mac models introduced after public availability of OS X Lion automatically use the Lion Internet Recovery feature if the Recovery HD (Command-R method above) doesn't work. Lion Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick test of your memory and hard drive to ensure there are no hardware issues.
Lion Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, enter the WPA passphrase. Next, Lion Internet Recovery will download and start from a Recovery HD image. From there, you are offered all the same utilities and functions described above.
As with the Recovery HD, reinstallation of OS X Lion from Lion Internet Recovery requires an Internet connection. See "Supported network configurations and protocols" below.
Restoring iLife applications after Internet Restore of OS X Lion
If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start from Lion.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
Source: Lion Recovery
It's a bit sad that these seem to be the only 2 options. Lion Internet Recovery is the preferred one here since my monthly internet traffic limit isn't a problem (but my download speed is). This problem could have been easily solved by Apple by just checking the system specs or serial number when trying to download Lion from the Mac AppStore. By using one of the 2 options in my previous sentence the Mac AppStore could see that I have a new Mac Mini 2011 that ships with Lion which would give me the option to download Lion from the Mac AppStore for free and eventually create a bootable USB thumb drive of it. -
How to create COGSuFF0Cwhen goods was returned from customer
Hi,
goods which deliveried from nonvaluated sales order stock was returned from customer and reduce revenue and AR.
so, we need do following process：
create returned sales order〉delivery note and goods receipted-〉billing
the goods can be receipted in sales order stock ,and can be invoiced .
but how to create COGS with returened sales order for nonvaluated sales order stock?Hi
T-CODE :MR21 ，It is used to change the standard price ，we are in the environment that make to order with nonvaluated sales order stock ，so donu2019t need do standard coting .
I konw : With a nonvaluated sales order stock, inventory changes are not reflected in Financial Accounting. The sales order stock is settled to Financial Accounting only after results analysis and settlement of the calculated values (results analysis data) .
for normal process , if billing was created ,then do results analysis and settlement of the calculated values ,COGS will be post in financial accounting
for returen prcoess :
1. created returen sales order and referenced origin billing document.
2. create delivery note and goods receipted in sales order stock which was deliveried to customer stock
3. create billing document and revenue posted in financial accounting
4. do results analysis with returen sales order ,the system show error message: W KJ 816 No object was selected
when used the orign sales order to do results analysis ,but without any change to save !
how to post COGS in financial accounting ,when goods was return from cusromer in the environment that make to order with nonvaluated sales order stock ? -
How to create a Web Dynpro Project from Downloaded zip file?
Hi,
I have been working in Java Web Dynpro for last 1 month but not able
to create any Web Dynpro from Downloaded zip file?
Can anybody tell me how to create a Java Web Dynpro Project from
Donloaded zip code?
Regards
Kaushik BanerjeeHi Kaushik,
You can add the existing zip file into your workspace by the following way -
First open the NWDS and create a new project by clicking file -> new -> Project -> Simple -> Project
and then File -> Import -> zipfile and then browse the zip file into the newly created project.
or else you can also unzip the zip file into a folder and then Use the option of Import an exisitng project into workspace. You can find this in the File-> import -> Existing project into workspace. and then use the Browse option to browse to the existing folder.
After importing the project you need to rebuild the project
Regards,
Raju Bonagiri.
Maybe you are looking for
-
Is there a workaround for exported Muse html files to render accurately when opened in DreamWeaver d
Is there a workaround for exported Muse html files to render accurately when opened in DreamWeaver design view?
-
HT1444 upgrading from mac os x 10.4.11 reccomendations
Power book G4....runing mac os x 10.4.11 need 10.6 or better. Wanting advice.
-
Not executing a line when debugging
Hi, In Visual studio you can pull the cursor over a line so that it is not executed. Is there any way you can do this in Netbeans 6.5? int I = 0; I++ return I; Lets say I am trying to jump the I++ line when debugging, how would I do that so that I wo
-
I am preparing a functional specification for a customised report. Report is just to see stock in SLoc without value to be displayed. So from which table I can take stock values.
-
How do I stop the ability for my ipad and iPhone to sync
my ipad shows all my text messages, Facebook notifications, email etc... from my iPhone. How do I get that to stop?