How to create a standard SOAP request message from a given WSDL file?

Hello,
If I have a WSDL file (either from a .net web service or from the famous Amazon web services), what is the best way to generate a SOAP compliant request message?
I am having trouble understanding the role of WSDL file in a given web service.
Question 1:
If I have a web service that is implemented using jaxm, how do I create/publish a WSDL file that describes the web service?
Assuming I can generate a wsdl file, can I recreate the SOAP request message from the WSDL file automatically (that matches the original request, which is hand build by me?)
Question 2:
If I have a web service that is implemented using JAX-RPC, based on the WSDL file, can I simply generate a valid SOAP message (by some JAVA api) and get the response message directly?
thanks...

I have the same question ("Assuming I can generate a wsdl file, can I recreate the SOAP request message from the WSDL file automatically (that matches the original request, which is hand build by me?)")
Have you already found an answer to this?

Similar Messages

  • How to get contents of Soap Over JMS web service's wsdl file

    Hi,
    Is there a way to get the soap over jms webservice's wsdl file in browser? if yes please provide me the details how to get it.
    OR how can i get the contensts of WSDL file for soap over jms wsdl file.
    thanks in advance.

    I have the same question ("Assuming I can generate a wsdl file, can I recreate the SOAP request message from the WSDL file automatically (that matches the original request, which is hand build by me?)")
    Have you already found an answer to this?

  • How to pass soap request message to server?

    how i can pass soap request message to server using http request header? the soap
    message contains remote procedure call which invokes the method at serverside?
    and where i have to write that header request?
    so i dont know how to pass the request soap message document
    [addsoaprequest.xml]

    Hello,
    We have a diagnostic tool called Post [1] that will post the request
    directly to a SOAP server. You can also try the graphical tool WeX [2]
    so you can see what is happening at the wire level.
    I may have misunderstood your question and goal. The purpose of the
    JAX-RPC [3] API is to provide a high-level abstraction of SOAP
    communications such as you describe.
    What is your use case?
    Thanks,
    Bruce
    [1]
    http://edocs.bea.com/wls/docs81/webserv/trouble.html#1066132
    [2]
    http://webservice.bea.com/wex.zip
    [3]
    http://java.sun.com/xml/jaxrpc/index.html
    Nisha Kothari wrote:
    >
    how i can pass soap request message to server using http request header? the soap
    message contains remote procedure call which invokes the method at serverside?
    and where i have to write that header request?
    so i dont know how to pass the request soap message document
    Name: addsoaprequest.xml
    addsoaprequest.xml Type: ACT Project (text/xml)
    Encoding: base64

  • How to create iView for Leave Request Approval for ESS Tab in Portal

    Hello ,
    I am new to  Enterprise portal. I got a requirement for creating iViews.
    How to create iView for Leave Request Approval for ESS Tab in Portal.??
    Please give me clearly or provide any document.
    Thanks
    Risha

    Hi Risha,
    is it customized application ?
    If so in SWFVISU transaction maintaain the entry .
    Use transaction SWFVISU to prepare standard setting for your Workitem in the UWL. --Parameters for Work Item Visualization in the UWL.
    Have a look at below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/59/d516690e854c7090ae15bf492a869f/content.htm

  • How to create a standard report that allows filtering?

    Hi Guys and Gals,
    Sometimes, the standard report is great because it gives the user the feeling of a grid. i.e. All of the values are editable on one page, kind of like a spreadsheet. That is sometimes very useful. But if there is a lot of data, a filtering mechanism is necessary.
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    Allowing the user to specify the number of rows displayed would be peachy-keen too.
    Thanks,
    Kim
    P.S. I'm running Apex 4.1 with Oracle 11g.

    Kim2012 wrote:
    Your idea sounds very promising, but I apparently need a nudge in the right direction. From "Create Page", I clicked on "Form" and then "Tabular Form". Why would you do this? The advice given was
    create a standard report page using the Create New Page wizardi.e. go to Home > Application Builder > Application > Create Page and click Classic Report, this was suggested because the original post said:
    >
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    >
    Nothing about forms. Tabular Forms, Tabular Forms. Despite many enhancements over the last few versions, tabular forms still cause problems, especially for novices trying to go beyond their own competence and the built-in capabilities of wizard-generated tabular forms.
    More good advice: Re: Newbie question-how does the tabular form work?  How to populate prim key? and—if based on decent database design—out of the box you have a usable and robust application. Use an Interactive Report or a custom report template and add some CSS and you can get something a lot more powerful, flexible and better looking than any tabular form. Spend the time you haven't wasted on frustrated hacking of tabular forms adding more features and enhancements to your app.

  • How to create a substitute for requester in SRM 7.0

    Hi,
    do you know how to create a substitute for requester?
    we have groups of 2 people and we want that they can see and edit shopping carts one of each other. Do you know how is it possible? it will be necessary for all SCs.
    Thanks.
    Regards,
    Nelson

    You can use the "Team Cart" feature introduced in SRM 7 for your requirement.
    Take a look at this wiki page for more information http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
    Edited by: Jay Yang on Mar 31, 2011 10:47 AM

  • How to create a New Tranport Request for changed  Extract structure

    How to create a New Tranport Request for changed  Extract structure ?
    Hi Experts,
    I have a FI AP Generic Datasource containing extract structure with appended fields.
    It has already been activated and transported to Testing System.
    Now, I am to create a new transport request for this DataSource and Extract structure.
    I do not want to delete and recreate the Generic Datasource.
    I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
    Please let me know the steps
    URGENT

    Hi Dev,
    Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
    Hope it helps...

  • How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

    We are using B2B & OSB to send out messages via eBMS protocol
    So basically this are the two use cases
    1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
    2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
    We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
    On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
    On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
    When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
    How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
    We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
    I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
    Any response is highly appreciated!

    Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
    If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
    Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

  • How to create a service entry sheet based from the PO

    how to create a service entry sheet based from the PO
    Gurus,
    I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
    The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
    Please help.thanks!

    HI,
    Process for Creating Service Entry Sheet
    Transaction Code :    ML81N
    1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
    2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
    3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
    4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
    5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter.  (*For the next time, no adoption is required, just continue)
    6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
    7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
    8)Save .
    9)Service Entry Sheet is SAVED and account posting made.
    Hope, it is useful for you,
    Regards,
    K.Rajendran

  • How to create a table with datatype blob and insert a pdf file (ravi)

    how to create a table with datatype blob and insert a pdf file,
    give me the explain asap
    1.create the table?
    2.insert the pdffiles into tables?
    3.how to view the files?
    Thanks & Regards
    ravikumar.k
    Edited by: 895044 on Dec 5, 2011 2:55 AM

    895044 wrote:
    how to create a table with datatype blob and insert a pdf file,
    give me the explain asapPerhaps you should read...
    {message:id=9360002}
    especially point 2.
    We're not just sitting here waiting to answer your question as quickly as possible for you.

  • How to create  a datasource for 0COSTCENTER to load data in csv file  in BI

    how to create  a datasource for 0COSTCENTER to load data in csv file  in BI 7.0 system
    can you emil me the picture of the step about how to  loaded individual values of the hierarchy using CSV file
    thank you very much
    my emil is <Removed>
    allen

    Step 1: Load Required Master Data for 0CostCenter in to BI system
    Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
    Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
    Step 4: Mapping
    Create Text Node thats the first node (Root Node)
    Insert Characteristic Nodes
    Insert the Last Node of the Hierarchy
    Then you need to create a Open hub Destination for extracting data into the .csv file...
    Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
    Thanks,
    Sandhya

  • How do I backup and view text messages from my iphone 4?

    How do I backup and view text messages from my iphone 4? I want to know where and how to backup and view text messages and all other personal files, including voicemail, recent calls, etc. from my iphone. Is this function in iTunes and/or does iTunes already backup this stuff when I sync?
    I really just want the answer to how and where this works.
    Thanks

    Apple provides functionality in the backup done via iTunes to backup the device and text messages.  There is no functionality to view the text messages on the computer.
    About iOS backups
    Other programs are available which can extract text messages from the device or the iTunes created backup and then be viewed on the computer.  To my knowledge, no program exists which can force backed up text messages into the device once they've been removed.
    Google is your friend when looking for 3rd party software related to text messages.

  • How do I retrieve and view text messages from icloud

    How can I view and retrieve text messages from my ICloud?

    Apple provides functionality in the backup done via iTunes to backup the device and text messages.  There is no functionality to view the text messages on the computer.
    About iOS backups
    Other programs are available which can extract text messages from the device or the iTunes created backup and then be viewed on the computer.  To my knowledge, no program exists which can force backed up text messages into the device once they've been removed.
    Google is your friend when looking for 3rd party software related to text messages.

  • How can I stop auto deletion of messages from my inbox?

    How can I stop auto deletion of messages from my inbox?
    I've tried to fix this by changing the IMAP account's Junk settings so that they are moved either to the
    "Junk" folder on 'account name'
    or
    Other: (drop down list for choosing accounts and one of its folders) Junk on 'account name'
    I am sure I lost all of my important, not junk mail, amazon.com messages as well as other messages from comercial sites.
    Secondly: Please tell me what the difference is between the 2 junk folder choices above.
    Thank you,
    - Jim

    http://kb.mozillazine.org/Disappearing_mail
    I don't understand "Junk on 'account name'". Can you provide a screenshot?
    http://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem

  • HT201269 How do I transfer my SMS text messages from one Iphone to another or to my Macbook Pro?

    How do I transfer my SMS text messages from one Iphone to another or to my Macbook Pro?

    Or you can be guided bt this 'officail' Apple support document:
    http://support.apple.com/kb/PH4441
    Ciao.
    Csound 1 greetings:  Nothing wrong with a little plagiarism.

Maybe you are looking for