How to create an email field

Hello,
I am creating a form that has a field in which I would like to put an email address. The form would become in-editable once it is signed. But I would like that the recipient of the form be able to click on that email address and be taken to their email program.
It is easy enough to do all the above with a web site address with the following script:
try {app.launchURL(event.target.value);} catch (e) {}
But how can I do this with an email address?
Thanks,
Tom

I'm not sure this is going to work after the file was signed, but you can try this:
try {app.launchURL("mailto:"+event.target.value);} catch (e) {}

Similar Messages

Quick Tip: How to create editable form fields | Acrobat X Tips & Tricks | Adobe TV

A short tip that details how to create editable form fields using Acrobat X Std. or Pro.
http://adobe.ly/wzXkmL

I have created a form which will be filled out by customers and sent back to me via 'submit' button. What I am trying to figure out is when we receive the filled out form, is there any way to have it as a pdf. To clarify, when the form is filled out and sent, the receiver opens the email and attached is a non-editable pdf. This way the customers information is no longer editable.

BB apps is not working, how to create BB email add? please help

BB apps is not working, how to create BB email add? please help

If none of the blackberry apps are working and you are unable to setup an email address..... have you got a Blackberry Data Plan active on your account?

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

How to create a new field in a sub screen in material master. ?

How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desired

Follow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed

How to create a calculated field

Hi. I'd like to know how to create a calculated field for a master- detail form. For example: having two db fields price and quantity, i created a the total item (price * quantity) as pl/sql function like this:
begin
:p13_item_total := :p13_price * :p13_quantity;
end;
However, the item is not calculated. It is not and instant calculation. I mean if i modify either price or quantity, how to recalculate item total immediately

You must submit the page to do it with PL/SQL. If you do not want to submit the page, you must do it with JavaScript.
Thanks,
Tyler

How to create a new field

how to create a new field form se 38 and update it to the customized table in the se11. I have done modification insertion deletion and update of field values in se 38 and has updated to the table in se 11. I want to know how to create a table from se38 and update it to the table in se11.I dont know whether it is possible. Enlight me.
with regards,
SREERAM M

Hi:
have a look
[Link1|http://www.wiziq.com/tutorial/17782-SAP-BDC-File-Handling]
[Link2|http://www.sap-img.com/abap/learning-bdc-programming.htm]
Regards
Shashi

How to Create the new Field ( Table - Row) in SAP B1

I have a scenario in which the Purchase calculation is based on LR, so for that we have to add new field in Purchase Document. that filed is not available in form setting. kindly let me know how to Create a new field in Purchase document.
Thanks

Hi,
I have adding new & existing forms and creating User Defined Field in row. example on adding a field in an existing Form and its corresponding to the database, including user input validations?
I want to add a new field in the detail section ( row area ) of a Production Document, and save it to database and read it back when the document is opened.
Thanks.
Syed Waqar Khurshid

How to create narow down field?

How to create narow down field?
when i type the data in a field that field show list of value in narrow down style...

Have you tried "Text Field with Auto-complete" ? ( available only in APEX4.0)
Regards,
Hari

How to pass smtp_addr(email field) to cremas idoc while creation of vendor?

Hi All,
i am creating the vendors by IDOC by using CREMAS basic type CREMAS05.
There is no email field in any of the idoc segments,as i need to pass the email address being mandatory,
i created the Z segment and added the email field into it and then created the z extension and added this zsegment into the extension.
Now how do i and where do i map this field so that email data is also passed while creating the vendor master.
i have debugged the cremas Function Module IDOC_INPUT_CREDITOR and the data is getting passed segment wise,and for customer segement i.e for the zsegment there is a enhancement section where i need to pass this field,but i do not know how do i map this field and with what structure.
Please let me know how do i handel this/or is there in other way to do it.
Thanks.
RJP.

Hi,
the email is part of the address data. It is therefore not belonging to the customer master data. So it is also not part of the DEBMAS idoctype.
To distribute via ALE accurate customer address data, you need to distribute ADRMAS, ADR2MAS, ADR3MAS idoctypes too.
See [note 384462|https://service.sap.com/sap/support/notes/384462] and [note 306275|https://service.sap.com/sap/support/notes/306275]
BR
Alain

How to create Remainder email workflow in share point 2010 designer without creating the remainder date (calculated) column in the list

Hi,<o:p></o:p>
I have task to create remainder email notification 3 days before by comparing with End
date (my list item) so i created one calculated column in the list as remainder date by using that remainder date
i created, but my project manager told me create same remainder notification work flow without create that remainder date i tried to write calculation in work flow
but it is not working if any one knows how to do this please help me<o:p></o:p>
Thanking you,<o:p></o:p>
ArunDarly <o:p></o:p>

Hi,
For reminder type requirements, I tend to use the ‘Information Management Policy’ SPD method as described in
this blog article by Laura Rogers (it’s for MOSS and WSS but works in SP2010 also).
This method avoids the use of calculated columns; rather the workflow does the calculation and outputs information into a ‘reminder’ field. Also, I don’t like the idea of ‘paused workflows’, so this method works for me.
Cheers
Matt

How to create new form fields in several columns (spreadsheet) and have them named consecutively?

Hopefully someone can help. I created a new form from an Excel spreadsheet, but the form field recognition didn't "take" well and very little of the spreadsheet translated into form fields. I need to create new fields (31) for each column (about 10) and I want the fields in each column to have a keyword from the parent column and the fields numbered consecutively. I'm really hoping I don't have to do this manually!
Next, is there a way to total the values in a column of fields (the same as the SUM function in Excel?) or does the form user have to dig out a calculator and add everything?
Can I create an email (submit) button and direct how (ie email) and by what method the form is sent?
Once the form is completed, is there a way for the user to lock it before sending it - ie a button they could press to make it no longer fillable? Or can I set the document to be a regular .pdf once it leaves the host machine?
I think that's it! Hopefully someone can help soon - this is a work project that could be potentially very time consuming if I have to create each form field manually. Thank you for any assistance!
Cheers,
LostintheNorth

LostintheNorth wrote:
Rats! Thank you for your link - I may take you up on that... however for the purposes of this form I'm more than halfway done, so I might as well keep plugging away. A workaround I found was to creat 32 of something I only need 31 of, then delete the parent. Somehow even playing with spacing on the "create multiple fields" option as the fields are being created only gets the vertical alignment close - no matter what I do I still end up manually aligning (vertically) 31 little boxes for each column so they fit visually. Grrrr.
Yes, this can be very tricky. If you don't get the exact right offset between each field, the difference will accumulate and after a while it will be completely off.
You just have to play around with it, until you get it right. Or almost right, and then adjust it manually.
Another thing I've noticed, is that when you select one field and right click for properties, you get an expanded version, as opposed to select/shift/enter for a bunch of cells only yields an abbreviated properties box - what's up with that? Is there a way to change this? For instance, I had set the properties for a column of 31 cells to be number, 1 decimal place. Halfway through my project, the lady I am doing the favor for tells me she would like 2 decimal places, requiring me to manually change each box for 62 cells! Apparently cell formatting is not an option in the abreviated properties dialogue! Is there a fix for that?
No, there isn't. Some propeties you have to set manually (or get right the first time, before copying and pasting...). There is a way to do it with a script, but it's a bit complex and requires using an undocumented method.
This next question is a bit more complicated, and may not be possible. The form I am creating is for payroll purposes, so at the moment it is generic (31 days) and the user fills in the month manually. Is it possible to get the form to recognize a month value (or create a pulldown menu with a selection of months to choose from) and limit the days accordingly? Or better yet, run a calendar function so that weekends and stat holidays are highlighted on the affected row? Kind of like what you can do with an Excel spreadsheet, which is what I designed the form in at the start (then printed to .pdf - the form field recognition did NOT work well on my spreadsheet! hence me doing every cell manually). Is this even possible, and if so, is it something I could learn to do?
Yeah, it's possible, but requires quite a bit of scripting knowledge. If you wish, contact me personally (by PM or email at try6767 at gmail dot com) and I could possibly create this for you.
If you want to do it yourself, you would have to learn a lot about both the Date object in JS and about the various date printing and scanning methods in Acrobat JS.

How to create an email distribution list?

How do you create an email distribution list

This is what I do and it works!
1. Create a new contact in iCloud (iCloud.com) or from your iPhone or iPad.
2. The company name field is your distribution name.
3. In one email field type in or paste in all the email addresses you want in the format as listed below. That's open double quotes follow by person's name close double quotes. Open greater than sign e-mail close greater then sign. Each additional entry follow by a comma. Last entry you don't need to.
"first lastName"<[email protected]>,
I would suggest do this in Note (on the iPad) or somewhere you can see your entres. Then paste them to the email field.
Good luck! Hope this helps.
Tuan
Long Beach CA

Crystal Reports XI - How to create a new field using a formula field

I'm quite new to CR, but have been learning quickly!
I would like to know how to automatically create a new record/field based on another field in that row...
I have a report showing the following data:
Run Code     Start KM    Stop KM    Status
H2                 100            150           Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
The status is generated by comparing the 'Start KM' and 'Stop KM' against fields in another table called 'Start Odo' and 'Stop Odo'
In this example...
H2 has 'Start Odo' and 'Stop Odo' values of 90 to 160, therefore there is still 90-100 to check. The 'Start KM' and 'Stop KM' is equal to the 'start Odo' and 'stop Odo' for S3, therefore it shows completed.
My question is how do you create a formula field, which will add an entire row...displaying the values 90-100.
I've been trying to use a conditional check in the 'Start KM' column, that sees if status is equal to partial than if start km is greater than start odo (Which is the reference km) then display the value of start odo in the new row. I'm stuck at how to create a new row.
I want the final result to look like this...
Run Code     Start KM    Stop KM    Status
H2                  90              100         Partial
H2                 100             150          Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
Any suggestions would be more than appreciated

Hi Adi
Looking at your examples it seems that you want to add a row to the existing recordset (rows fetched from the database).
If it is the case (even if based on a formula) then you can not do it within crystal. Crystal is designed to display data and ideally it should not generate the new data.
However, as per your requirement you can try to add this logic at database end. May be a command object within Crystal Reports can help you.
Let me know if you do not understand anything.
Regards
Nikhil

How to create a new field in predefined database table

Hi friends,
now i am working on scripts. In script form i have got a new field(vehicle number in goods receipt against purchase order) which is not available in any table. i think we have to create a new field in database table.how to create field in a pre defined data base table.

Hi,
To add new field to table, there are two option.
1.Include structure and
2. append struct..
the best way is append structure.
goto se11>give your table name>there is append structure button, when you will click on it, it will create a 'append structure',
after activating it, it will add fields to your table.

How to create an email field

Similar Messages

Maybe you are looking for