How to pass smtp_addr(email field) to cremas idoc while creation of vendor?

Hi All,
i am creating the vendors by IDOC by using CREMAS basic type CREMAS05.
There is no email field in any of the idoc segments,as i need to pass the email address being mandatory,
i created the Z segment and added the email field into it and then created the z extension and added this zsegment into the extension.
Now how do i and where do i map this field so that email data is also passed while creating the vendor master.
i have debugged the cremas Function Module IDOC_INPUT_CREDITOR and the data is getting passed segment wise,and for customer segement i.e for the zsegment there is a enhancement section where i need to pass this field,but i do not know how do i map this field and with what structure.
Please let me know how do i handel this/or is there in other way to do it.
Thanks.
RJP.

Hi,
the email is part of the address data. It is therefore not belonging to the customer master data. So it is also not part of the DEBMAS idoctype.
To distribute via ALE accurate customer address data, you need to distribute ADRMAS, ADR2MAS, ADR3MAS idoctypes too.
See [note 384462|https://service.sap.com/sap/support/notes/384462] and [note 306275|https://service.sap.com/sap/support/notes/306275]
BR
Alain

Similar Messages

  • How to pass the FORM Fields value by Form Personalization

    Hi ALL,
    I want to pass form filds values in to procedure. I am calling this procedure through form personalization of that form..... But it's not accepting any form field's value there... when i am passing hardcoded vales procedure is executing fine...
    can any one suggest what to do???
    i tried with these syntax
    TEST_EMP_FP(:ADDR.ADDRESS_ID,'ABC')
    TEST_EMP_FP(${item.ADDR.ADDRESS_ID.value},'ABC')
    Regards
    Ravi

    Hi,
    Iam calling an SRS from forms personlization. Can any body tell me how to pass the Form field values as parameters to the Reports. (Example when they call this Concurrent request from Transact5ions screen, The invoice number should be defaulted in the report parameter).
    Regards,,
    Anil.

  • URGENT : how to pass status & reason field in BAPI_LEAD_CREATEMULTI module

    HI,
    <b>CAN ANYONE TELL ME how to pass status & reason field in BAPI_LEAD_CREATEMULTI module.IT'S VERY URGENT,</b>
    SO PLEASE SEND ME YOUR REPLY AS EARLY AS POSSIBLE,
    TAHNKS IN ADVANCED

    Hi ,
    your config is missing , what is ur TD object ?
    you can cross check in SE75-->Under MARA
    regards
    Prabhu

  • How to pass attendees email info in hotmail calendar add event url

    Hello,
    Could anybody here please help me, how to pass attendees email address information in add event calendar url.
    I Know how to create web calendar event with start date , end date, location and description information by using url like this -
    https://bay03.calendar.live.com/calendar/calendar.aspx?rru=addevent&dtstart=20140510T093846Z&dtend=20140511T093846Z&summary=Summary%20of%20the%20event&location=Location%20of%20the%20event&description=Description%20of%20the%20event&uid=
    but I want to know how to add attendees email address to the above url, what is the query string param?
    Any help is greatly appreciated
    Thanks & Regards,
    Narayana Karthik

    Hi Dave,
    I had already posted there, they only asked me to post it here to get answer.
    Please check it - 
    http://answers.microsoft.com/en-us/outlook_com/forum/ocalendar-oaddevent/how-to-pass-attendees-email-info-in-hotmail/f9ceaa8e-8d45-4985-9524-c7625c03e2c9?tm=1414837768577
    Any help is greatly appreciated.
    Thanks & Regards,
    Narayana Karthik

  • How to pass PO customer fields from ECC to SUS ?

    Hi Gurus,
    We defined a customer PO field at ECC side and want to pass it to SUS and diaplay it in SUS PO, my question is, how to pass PO customer fields from ECC to SUS?
    Please advise.
    Thanks and best regards
    jack

    Hi jackytam  ,
    /people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
    you make get some pointers
    regards,
    Neelima

  • Passing Changed  extended fields using ALE-IDOC to receiving system

    Hi all,
    Please tell me how passing changed  extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
    For ex. in matmas05 extended for classification and inspection view and then created using 'CREATION'
    related bapi.Do i also need to incorporate the changes by change related bapi or ir can be handled by change pointer concept.
    Thanks.

    Hi Sanu
    1) Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.
    => Looks like you have extended standard IDOC here. so you need to find User Exit or BADI for the Push program to populate the additional fields. Yes, it is possible thru change pointers as well.
    1) Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
    => Yes, as suggested in 1 try finding User Exits/BADIs.
    Regards
    Shital

  • During creation of WBS element How to pass ACCount Assignment field as blnk

    Hi Experts,
    I am  creating of WBS element by using BAPI   ''BAPI_BUS2054_CREATE_MULTI'' .
    during creation, passed the ACCount Assignment field  as blank.
    but when i check that WBS in CJ20n that ACCount Assignment field in coming as checked.    Please suggest me how to pass this field as blank.
    Thanks
    Susant
    Edited by: Susanta22 on May 9, 2011 6:08 PM

    I have same issue. how you resolved it.

  • How to Pass table-structure-fields data to BRF PLUS Application

    Dear Eperts,
    i have a question related to BRF Plus management through abap program.
    In brf plus application end, Field1,field2,field3 these 3 are importing parameters.
                                           Table1->structure1->field4,field5 this is the table,with in one structure is there and 2 fields.
    in my abap program, i am getting values of fields let us take field1,field2,field3,field4,field5.
    And my question is
    1) How to pass fields to BRF Plus application from abap program.
    2)How to pass Table data to BRF Plus application from abap program.
    3)How to pass Structure data to BRF Plus application from abap program.
    4)How to get the result data from BRF Plus application to my abap program.
    And finally , how to run FDT_TEMPLATE_FUNCTION_PROCESS.
    How do i get the code automatically when calling the function in brf plus application.
    Regards
    venkata.

    Hi Venkat,
            As said by Jocelyn Dart, you need to go through BRF+ tutorials.
    -->You can see a on of the tutorial from the below link
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/50879cee-f9b5-2e10-039e-b2d6c4b10e6b

  • State machine custom task workflow how to pass one task field value to the next task field

    i am using ItemMetadata.xml to pass value from list to custom task first value its passing the but second value is showing as null
    plus how to pass one custom task value to the next custom task
    i.e one supervisor approver comments submitted field i want to see on department manager approval custom task which is the next approver from supervisor
    ows_firstfield=""
    ows_SecondField=""
    the above ows fields are from list
    in this i am unable to retrive the second value in the task form this is my first query?
    second query is that how can we pass one task field value to next approver task field value?
    any idea
    MCTS,ITIL

    What type of workflow is this?  IS this Visual Studio or SharePOint designer or third party (K2, Nintex, etc...)?  YOu should be able to get ahold of the task that was edited via the correlation token, and then grab any value you want from that
    task (wether it be a custom field or a standard worfklow task field). 
    It would help to know what you are using to build the workflow.
    Thanks!

  • How to pass long text field in BAPI_MATERIAL_MAINTAINDATA_RT

    Hi Guru's,
    I am using funtion module BAPI_MATERIAL_MAINTAINDATA_RT for uploading material master.
    In this I have to pass long text field for that one I am passing data to   MATERIALLONGTEXT table but it is throwing fallowing error.
    Long text for article THIS IS FOR TESTIN has no header segment.
    Will any body please guid me what are the parameters I have to pass for long text field.
    Thanks,
    Santhosh

    Hi ,
    your config is missing , what is ur TD object ?
    you can cross check in SE75-->Under MARA
    regards
    Prabhu

  • How to pass select option value to function module while using service call

    Hi,
    I have select-option in my WD application. To collect data based on user input im using service call. How to pass this select option values to my RFC.
    rgds
    sudhanshu

    Hi,
    Thank s for your reply. In fact im doing similar with following variation:
    i) collected range values using get_range* method.
    ii) separate low and high values as: 
    read table <field2> index 1 into wa_range.
    vert2_low = wa_range-low.
    vert2_high = wa_range-high.
    (Please note that in RFC I have taken two importing parameter as s_vert_lo and s_vert_hi)
    iii) Now setting these RFC attribute as:
    lo_el_importing->set_attribute(
        EXPORTING
          name =  `S_VERT_LO`
          value = vert2_low ).
    and
    lo_el_importing->set_attribute(
        EXPORTING
          name =  `S_VERT_HI`
          value = vert2_high ).
    iv) In RFC im having my query as :
    select <fld list> from BUT000 into table itab where vertical in r_vert.
    Here, r_vert is a range defined as:
    ranges r_vert for <fld refrence>
    r_vert-sign = 'I'.
    r_vert-option = 'BT'.
    r_vert-low = S_VERT_LO.
    r_vert-high = S_VERT_HI.
    append r_vert.
    Issue here is with ranges. if im passing both low and high values it is fine but if only low value being passed it is not giving me any record.
    Please suggest.
    Rgds
    Sudhanshu

  • How to create an email field

    Hello,
    I am creating a form that has a field in which I would like to put an email address. The form would become in-editable once it is signed. But I would like that the recipient of the form be able to click on that email address and be taken to their email program.
    It is easy enough to do all the above with a web site address with the following script:
    try {app.launchURL(event.target.value);} catch (e) {}
    But how can I do this with an email address?
    Thanks,
    Tom

    I'm not sure this is going to work after the file was signed, but you can try this:
    try {app.launchURL("mailto:"+event.target.value);} catch (e) {}

  • WebDynpro -  How to pass a single field value to BAPI table?

    Hello,
    I have just come from WebDynpro ABAP training and being a novice hit my first issue right away.
    I need to use BAPI - BAPI_CONTRACT_CREATEFROMDATA to create SD contract (I have used this BAPI to create a service call inside Webdynpro). I have two required fields: contract start and end dates. These fields passed in a table called CONTRACT_DATA_IN.
    When I use the fields from the structures or individual fields, all I need to do is just put them on the view, and when I hit my submit button they will be passed to the BAPI. They are a part of COMPONENTCONTROLLER context (I have also mapped them in View context), but tables are obviously different.
    Is there any way to pass data to tables as seamlessly without any code as for structures? Or do I need to write code to get the values from the input fields and then populate the table manually?
    Thanks,
    Alex

    Hi,
    Single customer contract creation use the struture-
    If you want to pass only one record then using the input fields for those 2 fields we can pass them to BAPI and then create the Customer Contract. This will work for only one record of customer contract.
    then we can directly read these input fields and pass to BAPI.
    Creating many customer contracts -
    For example, If you want to provide the group of records at a time and then you want to create the cusotmer contracts for so many records then you fill these fields and pass them to table then pass this table to the tables parameters of that BAPI.
    Here we need not create the Table UI element separate input fields would serve the purpose.
    Now we can create the batch of contracts for N customers.
    these input fields of a customer will be passed to table, then next set of input fields etc.
    For this create the Table UI element and fill all the records and then pass it to the Tables of the BAPI.
    Regards
    Lekha

  • How to pass null parameter fields to Crystal JRC

    Post Author: picage
    CA Forum: Crystal Reports
    Hi! I'm trying to set some parameter fields to NULL, however
    when I set the params I get this message: "The types of the
    parameter field and parameter field current values are not
    compatible". Isn't this possible in the newest versions of the JRC?
    It's really urgent. Thanks!
    Paulo

    Post Author: picage
    CA Forum: Crystal Reports
    Hi! I'm trying to set some parameter fields to NULL, however
    when I set the params I get this message: "The types of the
    parameter field and parameter field current values are not
    compatible". Isn't this possible in the newest versions of the JRC?
    It's really urgent. Thanks!
    Paulo

  • How to reflect a new field in Bank data while making payment through F-53?

    Hello Experts,
    How can i reflect a new field (payment reference) in bank data while making payment through F-53?
    I have tried to do it by Field status group(OBC4) but the same is replicating in vendor invoice but not in vendor payment.
    I tried it at both level,fsg anf posting key,But no use.
    Is there any other process to make available and required field in BANK DATA of vendor payment?
    Please suggest .
    Regards,
    Sumeya offrin

    Hello Sumeya,
    Please consider note 145864 which explains what you have to do to
    make this field visible in your selection criteria:
    "In Transaction FB00 (Financial Accounting Editing Options -> Open items
    activate the flag 'Payment reference as selection criterion'.
    This is valid for incoming payment; please test if the same procedure
    is valid for outgoing payment as well.
    I  check the  issue, and unfortunately these function seems to not be supported for vendor open items.
    When you try to select the 'Payment Reference' in Additional selections
    the following messages is arised:
    'No account specified, items selected via document no. or reference'
    That means,when you do not specify an account in F-53 you can only
    via Reference and/or document. This is not a bug but system design.
    For additional reference you can check the note 451105.
    The note made clear that the specification of an account is required for vendors during the selection via payment
    reference.
    Kind Regards,
    Fernando Evangelista

Maybe you are looking for

  • RPC error while executing procedure

    Hi, whenever I execute a procedure which extracts data from COBOL through relativity, it gives me RPC error and exits, the procedure code and error description is provided below, Procedure Code: =========== CREATE OR REPLACE Procedure CDB.pop_Utility

  • Query not retrieving correct result set

    I have a query that doesn't seem to be executing its where clause. I used getQuery to check it and ran it in SQL Navigator where it works fine. The same query doesn't work correctly when executed in the OA Framework. Any ideas? Thanks.

  • Restore default settings after using "Desktop 2 Login" app?

    Hi all! Downloaded the Desktop 2 Login app here: http://www.apple.com/downloads/macosx/icons_screensavers/desktop2login.html How do I restore the default settings after having run this? Thanks in advance!

  • Domains All Showing Default Welcome Landing Page

    When setting up Web services I am unable to get Server.app to point domains at their corresponding directories and actually work. I choose the websites directory, but every domain shows the default welcome page in the browser. I am wanting to host se

  • Canada Quebec tax on returns order using vertex

    hi friends,                 I am facing a issue when a return order is created with reference to original billing doc. For Quebec Canada using vertex GST is calculated on taxable amount into XR1 and Quebec QST is calculated on ( Taxable amount + GST