How to create an input enabled query with Integrated Planning

Hello experts. I have created an aggregation level in IP and I am trying to create an input enabled query based on this aggregation level. My problem is in the properties. On the query properties planning tab the Start query in change mode is grayed out and I am unable to select it. Also on all the chararteristic properties on the planning tab, the planning settings are all grayed out as well and the No budgeting is selected. There is a red exclamation here that says 'function not supported by server' Any ideas? Points will be awarded.
Peter

hi,
go through this help for the procedure...
[http://help.sap.com/saphelp_nw04s/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm]
hope it helps...

Similar Messages

How to Create an Input Enabled Query

Thanks in advance for your help, and sorry for the seemingly simple question, but I am new to integrated planning.
I am trying to provide a simple method for the end users to update planning data in a cube. From what I read I should be able to do this with a real time cube and an input enabled query.
I have created the real time cube with my desired characteristics and key figures. I have loaded base data to it and change it to be input ready.
Now I need to create my input ready query. I cannot seem to figure out how to do this. From BEx Analyzer the options for enabling input and change mode at query start are greyed out.
Can someone enlighten me on what I am missing or suggest some reading on how to do this?
Regards
KB

OK, I got over this hurdle. Turning a KF on for input enable the selection to have the query open in change mode. However, when I do this and run the query in WeBEx the query line style changes to all blue and does not allow input.
I have all my Characteristics from the cube included in the aggregation and have included them all in the query as well (in the same order).
Any thoughts?

How to Create an Input Schedule Comparison with Data Using EVDRE

Hello,
I try implement the scenario described in "How to Create an Input Schedule Comparison with Data Using EVDRE".
Once I am using the "Insert Function" from the panel and selecting the EVTIM function Excel crashes (see page 8 How to paper).
Systems:
BPC 7.0 NW SP02
Office 2007
BPCADminClient and BPCOfficeClient up to date
Have anyone a solution?
Thanks
Oktay

Hi Oktay -
This function works in my BPC70NW SP02 system. Your issue might be that you are trying to access a TIME member that does not exist. Please make sure the offset value is a valid dimension member.
I can confirm that EVTIM does allow the offset for base members (such as 2009.MAY) as well as parent nodes (such as 2009.Q1 or 2008.TOTAL)... BUT...the offset result of the EVTIM function needs to be a valid dimension member!
Regards,
Sheldon

How to create an Input Ready Query in Bex Excel with no transact data

Hi
We created a query where we want the user to put in NEW LINES. This query has in general no data when user starts planning.
We have 2 front-ends for this, Bex Web and Excel. Both shows initial 'no data available
BexWeb': Implementing the command set_data_entry_mode we get all the relevant columns for the input
Excel: Command set_data_entry_mode or set_input_mode does not allow the users to insert new lines. Still error message pops up 'no data available'
Do you have a solution for that ?
Regards,
Thomas

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

Input enable query column using Planning function

Is it possible to input enable a column in query based on user action in Radio button group or button group by calling a planning function or WAD?
By default the column property for query will be Planning not allowed, but a user action should change the mode to Planning allowed using planning function or entries.
Thanks

Hi Ravi,
you could try to write an exit data slice and a planning function which sets the data slice to not lock the data during runtime. You can find several threads in this forum. how an exit data slice can be used to control the locking of data during runtime.
Together with the command I mentioned in my last answer this may work, but it still depends on your requirements. A dataslice checks only the combination of characteristics. If you can identiy a characteristic for each column this may work. If not, there is no characteristic combination which can be locked. Please consider this when designing your application. This may lead to an additional characteristic which is used just to identify which column should be locked.
Hope this helps ...
Regards Matthias Nutt
SAP Consulting Switzerland

Issue with Input Ready Query in Integrated Planning.

Hello Everyone,
I've been working on Integrated Planning for some time now. My company recently started using a new server for this work. I find that I am unable to make the queries "input ready". Though I edited the properties of the key figure to "accept user entered values" and chose the option to "start query in change mode", when I execute the query, I find that it the values for the Key Figure cannot be changed. I tried to search in the OSS for any note(s) regarding this issue, but was unable to come up with a solution. Is the problem related to the server or is there some other configuration that I should take care of? Additionally, I would also like to know if there is any method to debug such a problem. I would appreciate it if someone could help me out in this regard.
Thanks,
Jake.

Hi,
Please verify the following.
1. Check if the underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. If you have created an aggregation level, Check if the most detailed information is available at that Aggregation Level(i.e, include characteristics so that the record can be uniquely identified at that aggregation level).Best would be to include all characteristics and create a query first and ensure it works.Then remove unwanted charecteristics one by one, so that you can fix the issue.Best thing to start with is to create the aggregation level on top the real time cube itself.
3. Check for any characteristic restrictions been defined for the real-time cubes.If so, try removing them temporarily and execute the query
4.Also check if any data slices has been created on the real time cube. If so, try removing it temporarily and then execute the query.
5. Set the property for Planning "Start query in Change Mode"- this is for th Query
6. Set the 'Key Figure' Planning Property to "Can be changed Manually or via Planning Functions" for the appropriate KeyFigures- this is for the key figures
7. Try removing the currency/unit from row/column. Try restricting them in filters rather than in row/columns.
8. Check if there are any locks occurring due to filter., i.e if you are using a filter and even if 1 record of this selection locks with another user's selection you lose the input readiness.
Mostly this should fix the issue. Assign points if this info helps you.
Thanks,
Balaji.

How to create schema to enable work with multiple users during developmet

Hi,
My goal is to enable all developers in the team to work on the same database and schema name installed on some server in the company but each developer will have a "personal" instance of the schema (so changes made to the database will not harm the other developers) and the connection to the schema will possibly made through different port (1521, 1522, 1523 etc). This kind of work is needed on developing time and possibly for the QA team. The oracle server is installed on some server and client installation can be installed (if needed) on each developer machine.
What do i need to do in order to achieve this goal (if it possible at all) ?
I am using Oracle 9.2
Thanks a LOT for any help.
simon.
Message was edited by:
user488209

> Oracle and JBoss and Hibernate which is my
persistence layer so Pl/SQL is not needed (right?)
Simon, I would have taken a virtual lead pipe to you if you worked in our dev shop and made that statement. :-)
Data persistance layers in the middle tier are fundementally flawed.
Why? Because they attempt to do what the database is already doing. The database's core function is data persistance, data integrity, data processing.
It does this better than any other piece of software in the architecture. If not, then why use a database tier (usually the most expensive one) anyway? What are the benefits? Why not simply persist the data in the middle tier and use file-based (not database-based) storage mechanism?
Simple example. An employee object persist in the middle tier. Performance becomes a problem. JBOSS and other app server s/w scaled by adding more h/w. So now you have that employee object persisting as copies across several app platforms.
One of the fundemental relational principles of dealing with a single copy of data is violated. Multiple copies exist. They need to be kept in sync'ed. Locking needs to be handled in a distributed fashion. And what happens when a batch process on the database, oblivious to the persistant copies in the app tier, changes that employee's data?
Guess what.. the database does all this for you. Locking. Data integrity. Scalability. Etc.
AND IT DOES IT BETTER THAN WHAT THE APP TIER CAN!
So to answer your question. I write entire applications and systems in PL/SQL. Yes, PL/SQL is a capable language. Yes, anything you can do in Java (as far as data processing goes), PL/SQL does better and faster with more inherant scalability - with less development time. Fact and not opinion.
Oracle has in excess of a million lines of PL/SQL source code for the Oracle Applications product suite. So PL/SQL is a "serious" language.. not something that is simply used for the odd thing.
Performance wise? Oracle Replication is entirely written in PL/SQL - and not in something like C/C++ (which usually also outperforms Java).
90% of all the code that we write, is PL/SQL. The remainder is Java (JBOSS) and Perl with some Pro*C legacy stuff (most of which is rewritten as PL/SQL). In fact, I think the guys now write more Perl code than Java (doing processing that needs to be done totally outside Oracle). And JBOSS is an integrated architecture that we're using... (we even have a JBOSS cluster with a Linux Virtual Server/Director as gateway)
Not using PL/SQL? That will be a critical mistake. (I suggest that you visit http://asktom.oracle.com for more details on PL/SQL, Java, application tiers and database tiers).

Object variable not set (Error 91) in Input Enabled query

Hello,
I'm having the following issue. I have created an input enabled query and included it in a planning workbook. Every time I open the workbook or query, and I got to an input enabled cell, I get the error below:
Object variable not set (Error 91)
This client has not used planning workbooks before. The system is on 7.10 SP10 for Bex Analyzer and SAP Gui 7.10 Patch Level 13.
I'm not finding any relevant so far in SDN. Any help anyone can provide is greatly appreciated.
Thanks,
Senthil

Hello,
Just wanted to let you all know that this issue has been resolved after updating my SAP Gui to 7.2 Patch Level 4 (Patch Level 5 was causing some other issues so I decided to stay at Level 4).
Thanks,
Senthil

How to compare result from sql query with data writen in html input tag?

how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?

Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist");

Is it possible to create input ready query with free characteristics ?

Hi All,
Is it possible to include characteristics restricted with variables in free charatceristics panel to make input ready query?
I am trying to create input ready query with above practice but unable to make query as input ready.
I have created input ready query on aggregation level. If I include characteristics restricted with variables in rows or filter then it is working fine. .ie. I am able to input entries at runtime of query.
Kindly help me out to find the solution as I have to include characteristics in free characteristics panel.

Hi Tilak,
Thanks for reply.
As per my knowledge, Every characteristics which is included at aggregation level should be included in either rows or filter level in query designer.
But as per my business requirement I have to include the characteristics restricted with variables( in default values only) in free characteristics. But the problem is if I do so the query runs in display mode not in input mode.
So kindly help me if you have any solution for above scenario.
---Shamkant

How to creat an app- enabled with iPhone ?

How to creat an app- enabled with iPhone ?

first there was FCP X now folks want FCP iPhone?
well now that engineers controll broadcast TV stations and pop concerts from an iPad, I guess thats OK
I guess we wont need a Mac Pro upgrade now.

Input Enabled Query

Hello BI Gurus,
I have an input enabled query . I have a restricted KG based on the fiscal period and amount KF.
For example:
Sales order           001/2009/Amount         002/2009/Amount       003/2009/Amount
100                      1000.00                            ---                         -
if there is any value then the field is input enabled and if there is no value then it is display only.In the above case 001/2009/Amount is input enabled and the remaining 002/2009/Amount     & 003/2009/Amount      are display only since it doesn't have any values.
If I have to move the amount 1000.00 from 001/2009 to 003/2009, how I have to do it. Please advise.
Thanks again for helping me.
Senthil

Hey Senthil
The right question to ask is -
Why are the cells with values only input-ready while the other cells which does not value are display only (not input)?
In my opinion, once you make the query input-ready, all cells should become input-ready, not just the ones which has values?
Once you have all the cells open for input, then the user can move the values from any month to any month.
Anyone?

Input ready query with default data

hi expert
How do I make input ready query to have a default value when signing in using WAD?
thanks.

Hi,
Use the following document for your query. If found useful do grant me number!
Revaluating Planning Functions (with Analysis Web Item)
Use
You want to build a planning application with which you can enter turnover amounts for certain account numbers and revaluate them using a factor that can be set. If you select a row of the table, only the amount in this row is to be revaluated. If you do not select any rows, all values are to be revaluated. The planning application is to look roughly as follows on execution:
This example serves in particular to clarify the interaction between a planning function and an Analysis Web item. Special properties here are:
●      Variable handling in the planning function
●      Row selection in the Analysis Web item
Prerequisites
In the planning modeler, you have created an aggregation level that contains the following InfoObjects: unit Currency Key, time characteristics Quarter and Calendar Year, key figure Amount, characteristics Version, Account Number, Cost Center.
The planning function and the query are to use the same data of this aggregation level.
Procedure
Planning Modeler: Creating Planning Functions, Variables, and Filters
       1.      Choose the Planning Functions tab page and create a planning function of the type Revaluate with technical name REVALUATE and description Revaluate for your aggregation level.
       2.      On the To the Parameters tab page, use the input help for the revaluation factor to create the REVAL_FACTOR variable with the Revaluation Factor description. The variable is to be specified in detail as follows: The variable is to be a required variable and is to be input ready; it is to be of type Number, but is not to contain a standard default value.
       3.      Choose the Filter tab page and create a filter with technical name ACCOUNT_FILT and description Revaluation Selection for your aggregation level.
Select the characteristics one after another and choose the input help icon in the column after Characteristic Restrictions. The dialog box for specifying characteristic restriction appears. Specify the required restrictions (in our example, Version = VERSION 1, Quarter = QUARTER 1, Calendar Year = 2007; Cost Center = 100002, Currency = Euro; for Account Number, all values are taken over), choose Add, and save the selections by clicking OK.
Choose Show Extended Settings and ensure that the Version characteristic cannot be changed on execution. (It must be possible to change the Amount key figure).
More information about creating planning functions, variables, and filters: Modeling Planning Scenarios
BEx Query Designer: Creating Queries
       1.      In the BEx Query Designer, create a query Revaluate (technical name: QUERY_REVALUATION) for your aggregation level.
       2.      Drag and drop the ACCOUNT_FILT filter into the Characteristic Restrictions area for filter values. In doing so, all characteristics are restricted to single values.
Drag and drop the Account Number characteristic into the area for default values.
       3.      Specify that the Account Number characteristic is in the rows. The values for this come from the master data.
Specify that the Amount key figure is in the columns. The values for this can be changed; on the Planning tab page, choose the Data Can be Changed Using User Input or Planning Functions option.
       4.      Save your query definition.
BEx Web Application Designer: Creating Web Templates
       1.      In the BEx Web Application Designer, create a Web template with technical name REVALUATION.
       2.      Create the following data providers:
○       DP_PLAN_DATA of the type Query View Data Provider, based on query QUERY_REVALUATION
○       DP_FILT_REVALUATION_FUNCTION of the type Filter. The data binding should come from the ACCOUNT_FILT filter.
       3.      Create the following Web items:
○       INPUT_FIELD_REVALUATION_FACTOR. Specify 10 as the default value (Internal Display ® Text: 10).
○       BUTTON_GROUP_ REVALUATION. Using Internal Display, create pushbutton1 with label Revaluation and, as Action, use the command wizard to assign the following commands (INSTRUCTION):
Table of Commands
Command
Parameters
Data provider-specific command: SET_SELECTION_STATE BY BINDING (Set Filter Values According to Different Sources)
●      Command target: target data provider DP_FILT_REVALUATION_FUNCTION
●      Data binding: selection binding using the Account Number (ZD_ACCNT) characteristic, where the value of the Web Item Selection binding type is to come from the ANALYSIS_ITEM_1 Web item, characteristic Account Number (ZD_ACCNT).
Planning-specific command EXEC_PLANNING_FUNCTION_SIMPLE (Execute Planning Function )
●      Data binding: Reference to data providers of type Filter DP_FILT_REVALUATE_FUNCTION, where the value from variable REVAL_FACTOR of connection type Web Item with Manual Input (ITEM_INPUT) is to come from INPUT_FIELD_REVALUATION_FACTOR.
●      Command-specific parameter: planning function REVALUATE
○       ANALYSIS_ITEM_1. Data provider DP_PLAN_DATA is assigned to the analysis grid as the (source) data provider.
Choose Behavior ® Row Selection ® Multiple (MULTIPLE).
In this case, it must be possible to select multiple rows and to execute the revaluation command on all selected rows. It is not therefore possible to give the command along with the row selection; the command must instead be given using pushbuttons.
       4.      Create a CONTAINER_LAYOUT_ITEM_1 (Web Items ® Enhanced ® Container).
Divide the container into columns, choose the With Tray display option, and enter label Revaluation under Tray Settings.
Add the following Web items to the container:
○       1st row, 1st column: INPUT_FIELD_REVALUATION_FACTOR
1st row, 2nd column BUTTON_GROUP_ REVALUATION
○       2nd row, 1st column (with option Colspan=2, that is, with a merge of columns 1 and 2): ANALYSIS_ITEM_1
The following figure illustrates the layout of the REVALUATION Web template:
Execution on the Web
       1.      Execute the Web template on the Web.
       2.      For testing, extend the URL to include parameter &debug=X.
If you have set this parameter, the selection is shown in the Executing Planning Function section.
       3.      Enter amounts for one or more account numbers, change the revaluation factor if necessary (default value = 10), select the required rows, and choose Revaluation.
For example, enter amount 100 in the first row, retain revaluation factor 10, and choose Revaluation. The query outputs an amount of 110 in both the selected row as well as in the overall result (as long as you have not entered any other values).
Regards,
SUbha

How to create Infoset&user group query--(query report)

Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .G

goto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu

Problem with input ready query with structure in Rows

Hi,
First I have created an input ready query without a structure where I have GL accounts in rows and key figures in column. It works and I can see that the cells are ready for input when I launch it in web through query designer.
Later, I am replacing the GL accounts in rows with a structure. Each line in the structure is combination of GL acctUoMChart of Acct (all restrcited to single values). Here comes the issue. When I run the query again (launching thru query designer) it dumps. Any idea?
Also, please let me know whether the planning applications can be made using BEX analyser OR WAD ?
Thanks a lot in advance.
Regards,
SSC
Edited by: sapsem con on Feb 19, 2009 2:38 PM

Hi,
Can you check ST22 for the dump analysis.
Also, planning applications can be built using BEx analyzer or WAD.
Check this link for example and step-by-step procedure to do the same.
http://help.sap.com/saphelp_nw70/helpdata/en/43/a18462c8291d9be10000000a1553f7/frameset.htm
Regards,
Deepti

How to create an input enabled query with Integrated Planning

Similar Messages

Maybe you are looking for