How to create an OrbtBehavior bean and then initialize

Greetings:
Here's my problem:
When I use OrbitBehavior as a standard piece of code from the J3D libraries it works, when I try to create a class and using the "extend" during the initialization, the code compiles,
but I can't figure out how to connect the OrbitBehavior into the Canvas3D and the connect all the pieces to create some neat mouse action in a game I"m writing.
Standard code:
javax.media.j3d.Canvas3D canvas3d =
new javax.media.j3d.Canvas3D();
com.sun.j3d.utils.behavior.vp.OrbitBehavior orbitBeh =
new com.sun.j3d.utils.behavior.vp.OrbitBehavior(canvas3d);
orbitBeh.setSchedulingBounds(
new javax.media.j3d.BoundingSphere(
new javax.vecmath.Point3d(0.0, 0.0, 0.0),
10000.0
com.sun.j3d.utils.universe.SimpleUniverse virtualUniverse =
new com.sun.j3d.universe.SimpleUniverse(canvas3d);
virtualUniverse.getViewingPlatform().setViewPlatformBehavior(canvas3d);
virtualUniverse.getViewer().getView().setBackClipDistance(10000.0);
virtualUniverse.addBranchGroup(scenegraphBG);
I've got as far as initializing a bean that is something like:
class myBeh extends com.sun.j3d.utils.behaviors.vp.OrbitBehavior{
In other object:
class myObj extends javax.swing.JPanel{
** Note: this code is exteremely similiar to the old milkshapeViewer source code found somewhere like chumbalumsoft.com.
The need to import using a Loader some MilkShape3D files is critical, and the OrbitBehavior code was about 3 lines long.
As far as OrbitBehavior goes, the model flips around and zooms, but I need to control the reactions to the mouse and have been
having an issue when settinup wakeupon... Criterion.
That problem is, that I need more than one wakeup variable to defined (mouse movement, mouse button1, mouse button2, mouse wheel),
KeyBoard keys, etc.
Any suggestions on how to properly use OrbitBehavior and build a KeyHandler into com.sun.j3d.utils.behavior.vp.* based object would be
greatly appreciated.
Thanks again,
-Cymryjian.

Hi Roy
I have the same doubt!! My application works with tables in a Oracle database but I have several Entity EJB too .. is it absolutely necessary to create the tables that are used by the Entity EJBs in a data dictionary project?
I hope anybody help me.
Thanks

Similar Messages

Class override, how to create the child class and then the base class

I started to write a program for a smart DMM, the problem is every version of the DMM the company change the communication commend.
My idea is to write a child class for every DMM version and every SubVI of the child will override the base class SubVI.
My problem is, i want first to create one child class and after i will see every thing is work, start to create the base class. that way i will see if am thinking the right way.
My question is
How can i create a child class and then create the base class and configure the SubVi of the child class to be Override of the base class?
I tried to search in the property of the class but i didn't see nothing.
Thanks
Solved!
Go to Solution.

This can be done and I've done it on occasion.
You simply create the base class with the dynamic dispatch methods you require (connector panes need to be identical to thos of the child class).
Then set the inheritance of the class to inherit from this base class. If your method is defined as a dynamic dispatch method in the parent, you'll most likely now have some errors (unless your child method was already DD in which case you might just be OK already).
To change the inheritance of a class, right-click the properties of the class in your project and select properties. I believe the ineritance tree is at the lower end of the properties. Click on the "change inheritance" (or something similar) to choose the class from which you now wish to inherit.
Say hello to my little friend.
RFC 2323 FHE-Compliant

How to create Search help exit, and then assign it to a collective search

hi gurus,
i have an intersting question for you, well my scenario is like i have to create a search help exit using some function module cause i didt found table for my search help but i can find the value through FM, i know we can create a search help exit and then assign it to collective search help,
my problem is what are the parameters i need to pass to this search help exit FM, and in the function module i want to use the value entered on the f4 selection screen to extract data through FM. i need to give a solution asap.
any reply will be highly appreciated
n rewards points for sure.
thanks mandy

Hi mandy,
Have a look at this code,
FUNCTION SHLP_SHOW_LIST.
""Local interface:
*" IMPORTING
*"     VALUE(PLANT) TYPE WERKS_D OPTIONAL
*"     VALUE(DISPLAY_ONLY) TYPE FLAG OPTIONAL
*" EXPORTING
*"     REFERENCE(ITEM_SELECTED) TYPE CHAR20
*" EXCEPTIONS
*"      POPUP_CANCELED
TYPE-POOLS SHLP .
CONSTANTS:
        co_shlpname            TYPE shlpname   VALUE 'SHLP_CONTAINER',
        co_shlpfield_itemalias TYPE ddshlpsfld VALUE 'CONTAINER'.
DATA: l_shlp         TYPE shlp_descr_t,
        l_subrc        TYPE sysubrc,
        l_return_tab   TYPE STANDARD TABLE OF ddshretval,
        l_return_wa    TYPE ddshretval,
        l_interface_wa TYPE ddshiface.
Get details for search help
CLEAR l_shlp.
l_shlp-shlpname = co_shlpname.
l_shlp-shlptype = 'SH'.
CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
       CHANGING
            shlp = l_shlp.
Assign virtual screen field
READ TABLE l_shlp-interface INTO l_interface_wa
WITH KEY shlpfield = co_shlpfield_itemalias.
l_interface_wa-value      = space.
l_interface_wa-valtabname = 'X2'.    "virtuel screen field
l_interface_wa-valfield   = 'Y2'.    "virtuel screen field
MODIFY l_shlp-interface FROM l_interface_wa INDEX sy-tabix.
Call F4 popup
CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
       EXPORTING
            shlp          = l_shlp
            disponly      = display_only
       IMPORTING
            rc            = l_subrc
       TABLES
            return_values = l_return_tab
       EXCEPTIONS
            OTHERS        = 0.
IF sy-subrc = 0 AND l_subrc = 0.
Value selected
    READ TABLE l_return_tab INDEX 1 INTO l_return_wa.
    item_selected = l_return_wa-fieldval.
ELSE.
Popup canceled / no value selected
    RAISE popup_canceled.
ENDIF.
ENDFUNCTION.
make sure to call these FMs and populate accordingly...
Thanks
Madhu

If i selected to "Create a new backup" and then cancelled that option but want to go back and select "Inherit backup history"; how do i go back and do that since now when i plug in my HD, that option doesn't appear anymore?? Any Help?

If i selected to "Create a new backup" and then canceled that option but want to go back and select "Inherit backup history"; how do I go back and do that since now when I plug in my external hard drive, that option doesn't appear anymore?? Any Help? I bought a MacBook Air, but decided to return it for the newest model, and I wanted to back it up so that I can then back it up on my new MacBook Air. I didn't understand the option to Inherit or start a new back up, and therefore selected the option to create a new backup. I believe I should have selected to Inherit backup history so that when i back it up on the new MackBook Air, it appears the same as the one I'm returning.... Is there anyway that i can re-select the option to Inherit backup history for time machine?

Thanks for sharing this link.
I've posted a question here https://discussions.apple.com/message/22049103#22049103 describing my situation. Are you able to suggest me the right option?

Each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album.. how do I create a blank album and then import photos from a flash drive into the new album?

each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album.. how do I create a blank album and then import photos from a flash drive into the new album?

just import the iPhoto
Surely you meant "just import the photo"? The Spell checker is dangerously creative !

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

I need to create a fillable form and then generate a reports.

Hello everybody. I need to create a fillable form and then generate a report using numbers. You know, for example if you have customers, I need to be able to write the usual , name, last name, address, and some other details and then using a standard letter I would like the form to be able to populate these fields automatically in a standard pre formatted letter by our company and then be able to print it.
Any help to point me in the right direction I would appretiate very much.
I have iwork 9 installed in my macbook pro

This is acalled a mail merge and is solved using a combination of Numbers (or address book) and Pages. To get detailed help how to performa a mail merge start in Pages, then in the help menu type Mail Merge:
Also download the help files for Numbers and Pages here:
http://support.apple.com/manuals/#
Page 247 in the Pages User's Guide has details how to perform a a mail merge.
Post back with specific questions if you need to.
Regards,
Wayne

How to create a Custom UIView and How to instantiate that ?

How to create a Custom UIView and How to instantiate that ?
In Flash, all we need to do is create a MovieClip and assign it a class name in the library.
Instantiation is a simple matter of:
var newclass:CustomClass = new CustomClass({initialization_data:1652});
addChild(newclass);
At this current point in time, my understanding of creating custom UIView in xcode is limited to the understanding that you have to:
1: Forward declare the class in the header.
2:
]newclass *CustomClass in @interface's {}
and THEN
@property (nonatomic, retain) newclass *CustomClass;
in the header file also.
3: Nib initialization in the implementation file in viewDidLoad and do "addSubview".
==============================
Based on my limited understanding at this point, I find the need to
@property (nonatomic, retain) newclass *CustomClass;
at the header somewhat limiting...as it denotes you must know how many instance you will create in the application before hand.
I believe I am wrong here, hence, my question is, how do I add custom UIViews with initialization codes in real time ?

hi,
one workaround i could think of is using the CM views to search for content that belongs to a category and display it in a custom way.
http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc904/wwsbr_api_view.html
this only allows you to search for the meta-data available in the CM views but not the content of an item that is available when doing a search.
in the next major portal release we will have a publich search API that can be used for these type of requirements. you can execute your search and format the results in the way you want.
regards,
christian

How to create ship to party and sold to party for DC10 during sales order ?

Hello all:
When creating sales order for a material in VA01 with sales Org 1000,
distribution channel 10, division 00
The system does not give me any Ship to Party and Sold to Party with the above combination
How to create ship to party and sold to party with the above combination (Plant 1000,
sales org 1000, distribution channel 10, during creation of a sales order
Ironically, when creating material master for a material with a material type KMAT, plant 1000
sales org 1000, the only distribution channel is populating in the input help (F4) is 10
For which no ship to party neither sold to party is maintained in sales order creation
Thanks in Advance!!

Dear Eshwer
It is bcoz, the said account groups (Sold To Party and Ship To Party) are not created in the sales area 1000 / 10 / 00.
To create a customer master, you have to go to XD01, select the Account Group, Company Code and the respective Sales Area and execute. In the Customer Master, you have three tabs, viz.General Data where you have give address details of the customer, then in Control Data, you have to assign the respective Recon Account and in Sales Area Data, you have to maintain the customer's sales related details. Once you give all these datas and save the data, a customer code will be displayed at the bottom.
Now go to VA01, input the sale order type and the sales area and execute.
thanks
G. Lakshmipathi

How to create a stored procedure and use it in Crystal reports

Hi All,
Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
Thanks in advance.

If you are using MSSQL SERVER then try creating a stored procedure like this
create proc Name
select * from Table
by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
here is the syntax to create SP
Syntax
CREATE PROC [ EDURE ] procedure_name [ ; number ]
    [ { @parameter data_type }
        [ VARYING ] [ = default ] [ OUTPUT ]
    ] [ ,...n ]
[ WITH
    { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
[ FOR REPLICATION ]
AS sql_statement [ ...n ]
Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.

How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

Creating a FM Book and then Flash RoboHelp starting from PDF

At our business we have an SOP (Standard Operating Procedures). There are about 20 chapters. We create them in Publisher and then convert to PDF and then post on our internal Wiki for all to see. This works for us. However, one of the chapters is 49 pages long and contains many tables that break down about 60 different adjustments our Call Center agents could use on a customer's account. We have a lot of agents doing a lot of adjustments wrong. So I've been tasked with coming up with a better system for agents to find the right adjustment and use it. The bosses wanted me to put the whole document into a spreadsheet. The first tab of the spreadsheet would be a list of questions, i.e. Are you giving a credit because of an outage? Are you giving a credit because of a PPV that didn't display?, and clicking on the question would take them to a tab that shows the appropriate adjustment. (This would save me from having to recreate the PDF links everytime I edit the PUB file and re-create the PDF.) Sounds good, but very archaic to me. I don't want to revert to spreadsheet when I have the Adobe Tech Comm Suite. I watched RJ's videos and was able to take the final Flash file from the Robo Help video and put it on our wiki and everyone loves it. Loves how easy it is to use, that it is searchable and well laid out. So, now my dilema, how do I take our existing PUB or PDF files and convert them to FM Books? I think I can figure out how to take the book to RoboHelp, but I don't know how to accomplish the first step. If there is an existing thread about this, please post it and I will read it. If you've done this before, please share your secret. Thanks!

The full version of Acrobat lets you save a PDF as an RTF file, which Frame can open. (There's a free eval you can use, if you don't have it.)
There are also a herd of third-party utility programs that do the conversion -- Google is your friend here.
After you've pulled the data out of the PDF, remember that you still need to divide the content into chapters/files and use those to build your book.
Art

How to Create a default domain and deploy the application in jdeveloper using a script or code (not manually)

Hi ,
I have installed Jdev using silent installation .
Now I have some apps already created I want to create a default domain and then deploy apps into that through ant or any script?
Can anyone help me on this?
Thanks and Regards,
Vivek Pemawat

We still don't know what you want to archive with here.
Cvele_new_account got you a pointer on how to install the DefaultDomain.
Tip: if you want to know or see the exact command line jdev uses to install the DefaultDomain, open jdev and in the application server navigator right click on hte integrated server and select configure DefualtDomain. In the log window you see the command line with all parameters.
Timo

How to create a new Characteristic and Key figure ?

Hi !
I am newly trying to learn APO DP and Could anyone please explain how to create a new Characteristic and Key figure in Demand Planning Administrator workbench[ RSA1] with steps?

Hi,
Instead of RSA1, use RSD1 to create Characteristics & Key figure.
1. Go to transaction, select radio button for respective info object i mean Char ot key fig.
2. Enter name of the same & click on create transaction.
3. Suppose it will ask for APO or BW then select APO for key fig. so some new functionality come in to key fig. like key fig. fixing etc.
4. always copy new key fig. or characteristics from standard.
5. after creation activate the key figure.
Hope this steps will help you to create Char. & key fig.
Regards
Sujay

How to create table.maint.generator and enduser should use using ztcode

Hi,
can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
any help can be appreciated.
Thanks & Regards,
Sandeep.

Hi,
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
some more helps
Check out this thread:
table maintenance
http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
Also, Check out this weblog on table maintenance:
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
how to create a a T-code of that
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
rgds
anver
if hlped pls mark points

How to create an OrbtBehavior bean and then initialize

Similar Messages

Maybe you are looking for