How to Create and Remove CMP Entity with Toplink in same transaction??

Hi, i have a problem to create and delete cmp intances with toplink.
I create a entity bean and remove the same entity bean in the same transaction.
ie. my method have this code:
bean a = homeBean.create(pk);
a.remove();
bean a = homeBean.create(pk);
this code throws a javax.ejb.DuplicateKeyException
Toplink not remove CMP, execute the two calls of create first.
What configure toplink to support this case ??
Is this possible ??
I Can't controling the transaction manualy i'm using CMP entity beans with CMT.
tanks.
Message was edited by:
Carlos Lacerda

BM,
If you want to import the utils package into your code, then the location of the utils package has to be in your CLASSPATH. JDeveloper uses libraries to define a project's CLASSPATH.
I'm not sure exactly what's going on here, but you might want to read the information about packages and class libraries in the online documentation. It's under:
User Guides
-> Working with JDeveloper
-> Packages and Class Libraries
Blaise

Similar Messages

How to create and remove package in Jdev project

hi,
I created a package for all my utils, then I import that package into my project, manually by inserting import myutils.*, somehow the other package can see it,
then I tried importing this same package by the wizard tool, I have a conflict message that duplicate code, of course this is true since both of them works, then I want to remove one of the packe from my ptroject, but I cannot remove either package from my project. Please tell me how
Thanks
BM

BM,
If you want to import the utils package into your code, then the location of the utils package has to be in your CLASSPATH. JDeveloper uses libraries to define a project's CLASSPATH.
I'm not sure exactly what's going on here, but you might want to read the information about packages and class libraries in the online documentation. It's under:
User Guides
-> Working with JDeveloper
-> Packages and Class Libraries
Blaise

How to create and use Data Vault with HTML/JavaScript (SAPUI5) for Mobile Apps?

Hello,
I am creating a demo Enterprise Mobile App, for cross platform and I want to use the Data Vault.
I am not able to figure out how to implement the Data Vault with HTML/JavaScript i.e. SAPUI5 for cross platform mobile apps I have a tutorial, but it is for Android based apps. Where as I want it for iOS as well. I guess, in this case, implementing the Data Vault using SAPUI5 over HTML and JavaScript would be better.
If anyone has any links or sample code to implement Data vault in HTML/JavaScript (SAPUI5) or specific for iOS apps, it would be great.
Thank you.

Hi,
This is the "SAP Mobile Documents" community, so this seems to be the wrong place for asking your question related to Data Vault / SAPUI5.
Maybe you should post your question here: http://scn.sap.com/community/developer-center/front-end.
best regards,
Ingo

How to create and use custom exceptions with ADF JClient

Hi
The forms developed using ADF JClient by default use pessimistic locking and throw an AlreadyLockedException if more than one user tries to modify the same record. I need to customize this exception so as to display the name of the Oracle user who has locked the record. Is this feasible? If yes, how can I achieve this.
PS: I've already tried creating my own messageBundle to customize the error messages. Even though I can change the message there, I'm unable to find any information in AlreadyLockedException or JboException that directly gives me the user or the oracle session id that has locked the record.

T A,
this information is not exposed through the JDBC driver and thus nit available to BC4J. So the answer is that you can't get this information.
Frank

How to create and process Iinteractive report with selected records in 4.1

Hi,
I want to have an Interactive report that will have in front of each row a checkbox that can be selected for batch processing. Is there a way to do so?
If there is please include some method to process those records i.e. for each selected record create a new record on a different table and update the record itself as processed.
thanks
Edited by: yannisr on Jul 13, 2012 5:58 AM

For this you need to consult APEX documentation for two things
Create a checkboxes using APEX_ITEM API
How to reference those checkboxes within an On Submit Process

How to add and remove storage from ASM at the same time?

Scenario:
I want to drop some disks from asm
1- Add disk to asm -----> rebalance
2- drop disk from asm ----> rebalance
Is there anyway to make this process faster instead of going to rebalancing twice?

I think you could try something like this.....
Add with a power limit of zero and then drop the disks with a powerlimit of 11.
alter system set ASM_POWER_LIMIT=0;
select * from v$asm_operation;
alter diskgroup DBFILE01_GRP
add disk 'ORCL:DB0009', 'ORCL:DB0010', 'ORCL:DB0011', 'ORCL:DB0012';
alter diskgroup DBFILE01_GRP drop disk DB0001, DB0002, DB0003, DB0004;
alter diskgroup DBFILE01_GRP rebalance power 11;
select * from v$asm_operation;

How to create and print contact sheet using photoshop elements 10?

how to create and print contact sheet with photoshop 10?

Which operating system are you using?
On a windows system you can use the Organizer
http://www.dummies.com/how-to/content/how-to-print-contact-sheets-in-photoshop-elements-.h tml
On a Mac, File>Contact Sheet II within the pse 10 editor

How to create labeled table of Content with expand and collapse

Hi All,
Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
User1
Template1
Template2
User2
+
User3
Template1
Template2
Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
Thanks
Bhupendra

Hi,
Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
Expand/Collapse are part of HGRID.
I think we can develop this functionality with little manipulation.
Regards,
Reetesh Sharma
Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM

How to create and delete an Endeca application in Windows

HI,
can you please help me in ,
how to create and delete an Endeca application inWindows machine not in Linux Machine.
Thanks.....

Hi,
Steps to create an Endeca Application are clearly given in Getting Started Guide.
http://docs.oracle.com/cd/E38680_01/Common.311/pdf/GettingStarted.pdf (Chapter 6 : Deploying a Reference Application)
If you want to create an endeca application so as to integrate with Product Catalog system such as ATG using ATG 10.1.1 or above , then create an endeca application using the discover-data-catalog-integration reference application. Steps for doing this are documented in ProductCatalogDTGuide
http://docs.oracle.com/cd/E38679_01/ToolsAndFrameworks.311/pdf/ProductCatalogDTGuide.pdf (Deploying the Product Catalog Application)
To delete an Endeca Application that you have created in Windows/linux
1. Navigate to the control directory of the application that you want to remove and execute the script
runCommand.bat --remove-app (Removes the provisioning information with EAC admin console)
2. Remove the instance configuration files for the application using the emgr_update command line utility
emgr_update.bat host localhost:8006 app_name My_app action remove_all_settings prefix My_prefix
3. You can then explicitly delete the directory in the Endeca_apps directory where you have initially created your application.
If you are using discover-data-catalog-integration, you can remove the CAS Record Store Instances by navigating to CAS/bin directory and executing
./component-manager-cmd.sh delete-component -n {YOUR_APP_RECORD_STORE_NAME}
Thanks,
Shabari

How to create and drop partitions automatically?

How to create and drop partitions automatically?
The environment is Oracle 10g(10.2.0.3) on the RHEL4.0 system.
I want to partition the MESSAGE table by date (NUMTODSINTERVAL(1,'DAY') ). One partition per day. Because the table is huge, only 2 partitions (today and yesterday's data) are necessary to be kept online. All the partitions that earlier than the previous day will be backed up and then dropped. I want to make the partition creating and dropping jobs run automatically. How to do it?
Thank you

junez wrote:
How to create and drop partitions automatically?
The environment is Oracle 10g(10.2.0.3) on the RHEL4.0 system.
I want to partition the MESSAGE table by date (NUMTODSINTERVAL(1,'DAY') ). One partition per day. Because the table is huge, only 2 partitions (today and yesterday's data) are necessary to be kept online. All the partitions that earlier than the previous day will be backed up and then dropped. I want to make the partition creating and dropping jobs run automatically. How to do it?With 11g, new partitions can automatically be created.
With 10g, you need to do that yourself. I prefer to create a "buffer" of future partitions - in case the job whose task it is to add new partitions gets held up or stuck. Or the job queue is full due to some problem and it does not get the chance to execute in time.
I dislike your partitioning criteria. I prefer using the date directly and not mangling it to something else. If a specific day has a large volume of data, then another option is to use hourly date ranged partitions. With local partitioned indexes and the date time range used for querying, this can be quite effective performance wise.
As for partitioning maintenance - I use a custom written partitionManager PL/SQL package that provides an interface for adding daily and hourly partitions to a table. Input parameters are for example name of the table, start date and the number of partitions to add. Similarly it provides interfaces for aging partitions - again by specifying a table and a date-time to use as the starting point, back into time, for removing old partitions.
I typically call this code from the actual application code itself - so before a new partition will be used for example, the app code will first ensure that it has a partition to use. This is safer than a separate job as the dependency is resolved where and when it is needed - and not done as a separate task.
For example - you should have a procedure/package that provides an app the means to log a message into your MESSAGE table. As part of an autonomous transaction, this procedure can check if the required partition exists, before attempting to insert a message into the table.
Where this approach is not possible, a DBMS_JOB can be used to create future partitions - but as I mentioned, rather have it add a bunch of future (empty) partitions in case something goes pear shape with the job mechanism.

How to streamline and remove duplicate files on my HD before I backup?

How to streamline and remove duplicate files on my HD before I backup?
is there a good program or freeware that can automate and isolate when I have
duplicate files hiding in the many folders on my Drive... Yes, in a perfect world
I should know better than having a Drive that is not perfectly organized
I think there is something called SpringCleaning for windows
is there something like this for Mac?
Time machine won't let you remove something after you realized you backed
up two of the same files... Thanks for ideas

+is there a good program or freeware that can automate and isolate when I have
duplicate files hiding in the many folders on my Drive.+
You should back up your drive with Time Machine before you delete any files in case you make a mistake.
Tidy Up! - 1.3.2
http://www.versiontracker.com/dyn/moreinfo/macosx/17908
+Time machine won't let you remove something after you realized you backed
up two of the same files.+
Click on the Time Machine browser icon on the dock. Locate the duplicate file you wish to delete and highlight it. Click on the button with the gear on and choose Delete "all backups of".

How to create and call a COM component in Java

Hi All,
can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
So please can you help in this.
Thanks in advance.

As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
[http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
However,if you are looking for ready made solutions ?
Implementation any one of the solutions stated below might serve your cause.
Open Source Solutions:
[http://j-interop.org/]
[http://www.danadler.com/jacob/]
Commercial Solutions:
[http://javacombridge.com/]
[http://www.jnbridge.com/]
[http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
[http://j-integra.intrinsyc.com/]
Hope this might help :)
REGARDS,
RaHuL

How to create and implement a new work schedule rule successfully?

Dear Community,
How to create and implement a new work schedule rule successfully?
In other words, what are all the basic steps to create and implement a new work schedule rule successfully?
Thanks in advance.

Hi,
Follow the below steps to create Work Schedule:
Holiday Calendar
Transaction Code: SCAL
Holiday calendar comprises of list of paid holidays to be given to employees on festivals by the company.
Personnel Area/SubArea Groupings
Go to SPRO --> Time Management --->Work Schedules --> Personnel SubArea Groupings
Maintain perosnnel area/Subarea groupings for work schedule.
i.e. Suppose in Mumbai you have WS = GEN ( 10 to 6) and in Chennai you have WS = NORM ( 8 to 4 )
Work Schedule
Go to SPRO --> Time Management --->Work Schedules -->Daily Work Schedules
Go to SPRO --> Time Management --->Work Schedules -->Period Work Schedules
Daily Work Schedule is actually your office timings with breaks (paid /unpaid) i.e. Planned Working Time which is then included
in Period Work Schedule to make a week ( M T W T F S S )
Daily Work Schedule (i.e. Day) -
> Period Work Schedule (i.e. Week)
Work Schedule Rules
Go to SPRO --> Time Management --->Work Schedules -->Work Schedule Rules and Work Schedules
After doing above mentioned configurations,maintain employee group/subgroup groupings in which you have to define which calendar is applicable for which type of employees for which work schedule.
You will maintain this work schedule in infotype 0007 - Planned Working Time of employee via transaction code - PA30

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

1) Since JSTL libraries are provided as Web application libraries, they must be deployed before the Web application that is using JSTL functionality is deployed. The libraries can be deployed using the Administration Console or with the command-line weblogic.Deployer tool.
Here’s an example of deploying a JSTL 1.2 library using the weblogic.Deployer command-line:
java weblogic.Deployer -adminurl t3://localhost:7001
-user weblogic -password weblogic
-deploy -library
d:/beahome/wlserver_10.3/common/deployable-libraries/jstl-1.2.war
This command deploys the JSTL 1.2 library using the default library-name, specification-version and implementation-version defined by the MANIFEST.MF in the library.
After a library is deployed, the extension-name, specification-version and implementation-version of the library can be found in Administration console. This information can also be found in the MANIFEST.MF file of the library WAR file.
For more information on deploying a Web module refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/deployment/deployunits.html
2) To reference a JSF or JSTL library, a standard web application can define a <library-ref> descriptor in the application’s weblogic.xml file. Here is an example:
<library-ref>
<library-name>jsf</library-name>
<specification-version>1.2</specification-version>
<implementation-version>1.2.0</implementation-version>
<exact-match>false</exact-match>
</library-ref>
For more information on referencing a Web application library refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/programming/libraries.html
3) Create a sample JSP in your application and JSP should look as shown below
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<html>
<head>
<title>TestJSTL</title>
</head>
<body>
<c:set var="topic" value="JSTL" />
<c:out value="${topic}" />
</body>
</html>
4) Create WAR and deploy and test.
Edited by: Murali Veligeti on Jul 26, 2012 9:00 AM

HOW TO CREATE and USE EVENTS IN WORKFLOWS .

HOW TO CREATE and USE EVENTS IN WORKFLOWS with the help of classes.
What i am doing is..
open se24
event tab->event name->parameters
method tab->method name->event handler->copy parameters
interface tab->if_workflow->enter
tell me what else to do step by step
Another important thing is that HOW to use these class events to trigger the workflows.
REPLY ASAP
THXS IN ADVANCE

Hi,
Pl. see this blog...
Raising ABAP OO events for workflow
Regards,
JOy.

How to Create and Remove CMP Entity with Toplink in same transaction??

Similar Messages

Maybe you are looking for