Problems with HDV footage from sony HDR - HC9
I have a new sony HDR-HC9 cam corder. I want to shoot in hi def (HDV) format for best quality, but I produce standard def DVDs as a finished product. I was hoping to use the built in iLink conversion from HDV to DV when downloading to the computer into iMovie. I have had many problems with this.
Usually, when I set it up to do the downconversion, I see a blue screen in iMovie, although iMovie will ff and rew the camera, no images come across. I experimented with setting the camera in DV record mode at the same time as I had the iLink down conversion set, and this appeared to work. I started downloading an hour tape, and when I came back 65minutes later (after it should have been done), saw the message that iMovie had quit. Reopened the project, and saw an hour worth of footage in the trash, but it was too crazy to reorder the clips from the trash back to the clips pane.
I resigned to import in hdv (1080i) format and not mess with hardware downconversion. This worked fine. I then added some chapter markers and shared the project with iDVD. I saved the project as an image file and then mounted it to check it for errors. The video was OK, but towards the end of the project, the sound was out of sync by a few seconds with the video.
I deleted encoded assets from the iDVD project, then reburned (save as image file). Same defect.
I then started a new iMovie project in standard DV widescreen, and dragged all of the clips from the HDV (1080i) project into the time line. It took over an hour for my mac mini to run the conversion, but the movie in iMovie appeared OK. I redid the iDVD project, and saved as image file. It appears to have worked correctly (although I have not looked at it on my widescreen TV yet to assess image quality.
Questions:
1) Has anyone had any luck getting HDR-HC9 iLink HDV-DV hardware conversion to work with iMovie, consistently?
2) Can anyone comment on image quality issues with converting HDV to DV footage using iMovie software.
3) Has anyone seen audio sync problems with iDVD from HDV original footage.
Thanks
Hi - you may get a more exact answer in the BlackMagic Macintosh forum, since there aren't a lot of BlackMagic queries on the Apple Discussions forums:
http://forum.blackmagicdesign.com/viewforum.php?f=11
Similar Messages
-
Importing footage from sony HDR-SR12 to External for later use in imovie?
Hi all, I have a question, I would like to save my movie footage which is on my sony HDR-SR12 to a external drive(G Raid1TB) so I can view and also import clips to imovie for making movie's later. I have partitioned the Ext HD 150gb for photos and 781gb for movie footage. Just out of curiosity I mounted my camera and pressed get info and the format on the sony camera is MS-Dos(fat32) does this matter at all? Also which is the best way or how do I import the footage from sony hdr-sr12 to the external Hd. I have never done this before so your help would be greatly appreciated, I don't want to mess up.
Thank You
JessI should have mentioned, it is a good idea to make an archive copy of your AVCHD footage before importing. You should be able to do this from the FILE menu in iMovie. This will preserve the AVCHD files exactly as they were on the camera.
When you import, you convert the AVCHD files (which are highly compressed) into Apple Intermediate Codec, which is suitable for editing.
If you want to make sure that your archive copy is working properly, you can import from your archive copy, rather than importing directly from the camera. This is a good way to make sure you have a good archive copy before erasing the video on the camera. -
Trouble capturing HDV footage from Sony Z5U in FCE4 - any ideas?
I've shot about half an hour of HDV footage with the Sony Z5U. Have the computer at home connected to my Mac with a firewire. Tried with both firewires that I own. I've used a similar camera before to capture footage recently with no problems.
Gone through the Easy Setup in FCE4 and changed it to HD, HDV1080i60. In the camera, the VCR mode is set for HDV, the Video Out for Component says "1080i/480i", the down convert and DV wide convert are for letter box.
Any ideas on what the problem is? Do I just have 2 bad Firewire cables? or a bad port on my computer/camera?Do you want to downconvert, or do you want to capture HD? Switch off downconvert. Switch off iLink.
-
Problem with imported movies from Sony Cyber Shot
Hello all, I have an unusal problem.
My mate has got a brand new sony cybershot camera which does movies.
These movies import into iPhoto no problem with sound.
However if I then use that clip in iMovie there is no sound, it does not matter how I try to import. I have tried importing direct from the sony card, from the import menu and from dragging. Still no dice.
What should be the next step?
Its iMovie HD and 10.4.4Hi Gary
get for 20$ the Apple mpeg2 plugin
and for free the tool Streamclip
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml -
Problem with .mxf files from Sony F5
Hi folks,
So, im putting together a bunch of shots shot RAW on F5 which are all .mxf. and I keep getting the error:
- Audio conforming failed for the following file: "filename.mxf 4800_1.cfa" Perhaps due to disk space -
There's about 500GB free on the drive I use for media cache, and I regularly clear cache, etc.
I don't need audio and as far as Im aware the DOP never even recorded any.
Its really just annoying and slowing me down a little having to click OK every minute or so.
And I think its the reason AE Network render isn't working.
Can I disable this, or get round the annoying pop ups?
Any help would be greatly appreciated!!
Cheers,
Andrew.
Camera: Sony F5 with AXS recorder mostly 4K 50fps
OSX Mavericks, After Effects cc2014 13.2.0.49 + most recent updates, etc.Two things to check.
1) Softtware Update to make sure you have the latest codec pack from Apple. (If you have it, you won't see any updates.)
2) This Sony plug-in download link.
Good luck.
Russ Haskell -
Importing tape material from SONY HDR-HC7e, blue screen
Hi,
I get blue screen even though the cam and the iMovie are communicating.
I tried importing in FCexpress with no hassle.
Any ideas, what to do in iMovie?Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named. com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Screen must be set to Million-colors
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
iMovie updated ?
QuickTime updated ?
Yours Bengt W -
I own a Sony HDR-HC9 Camera, uses tape. I have a i-Link fire wire from camera to computer to transfer movies. The problem is that the i-Link wire does not fit into the firewire connection to the apple
Is there a wire that converts? 800-400 adapter is not the way to go, I already made that mistake.
Thanks
JimThe 9pin to 4pin FW cable worked for my Sony HC42 Mini DV.
-
IMovie '09 Won't Import HD Content from Sony HDR-SR11 Camcorder
Hi,
iMovie stopped importing HD content from Sony HDR-SR11 camcorder. It only recognizes the standard definition content in the preview thumbnails. Previously this used to work with both a FireWire cable and a Mini USB. All of a sudden it doesn't import HD clips. There's no plugin failure either, because I reinstalled iMovie '09.
System Specifications:
Intel iMac 20" (Late 2008)
Intel Core 2 Duo@ 2.4 GHz.
4 GB RAM
Snow Leopard (10.6.4)
Thanks!With this camera you must erase the SD clips from the camera before you can import the HD clips.
[See this article|http://support.apple.com/kb/HT1793] -
Problem with movies imported from iPad3
Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas? -
Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact. What gives?
rdallas001 wrote:
Is the router to small?
Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc. -
Problem with date format from Oracle DB
Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
VaradaThanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada -
A problem with copying text from english pdf to a word file
i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?
-
Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor -
Problem with controlling Annotations from Excel VBA
Hi,
I have a PDF document that has plenty of sticky notes attached to it. These sticky notes have been added by multiple authors on all pages of the document. I am trying to import the contents of these sticky notes, their author and the page number to an excel spreadsheet. I am using Excel 2007 and Acrobat Professional 9.0.
This is the code that I am currently using to import the sticky notes, but the problem that I am facing is that when I run the macro -
Same sticky note contents, author and page numbers are imported multiple times
Not all sticky notes are imported, only some of them appear in the final excel spreadsheet
When I compare the number of sticky notes to that in the original PDF file, the number is correct. But the content is repeated content and that is the reason why only some of the sticky notes are imported.
This is an activity that I need to do on regular basis and the number of sticky notes that I need to import to excel may range between 100 to 200. It is really difficult to do this task manually, so an excel VBA macro could prove really helpful.
Sub ImportComments_Click()
Dim Fpath As String
Dim WordObj As Object
Dim wbkOutput As Excel.Workbook
Dim iRow As Integer
Dim i, j, k As Integer
Dim lRet As Long
Dim objAcroAVDoc As New Acrobat.acroAVDoc
Dim objAcroPDDoc As Acrobat.AcroPDDoc
Dim numPages As Long
Dim lAnnotscnt As Long
Dim Subtype As String
Dim NumComments As Long
Dim AcroApp As Acrobat.AcroApp
Dim objAcroPDPage As Acrobat.AcroPDPage
Dim annot As Acrobat.AcroPDAnnot
Sheets("Defect Log").Select
Range("L3").Activate
Fpath = ActiveCell.Value
Sheets("Defect Log").Select
Range("A1").Activate
i = 0
Do While (Not (IsEmpty(ActiveCell.Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 1).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 2).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 3).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 4).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 5).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 6).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 7).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 8).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 9).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 10).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 11).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 12).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 13).Value)) Or Not (IsEmpty(ActiveCell.Offset(0, 14).Value)))
i = i + 1
ActiveCell.Offset(1, 0).Select
Loop
iRow = i + 1
Set wbkOutput = ActiveWorkbook
lRet = objAcroAVDoc.Open(Fpath, "")
Set objAcroPDDoc = objAcroAVDoc.GetPDDoc
numPages = objAcroPDDoc.GetNumPages()
Set objAcroPDPage = objAcroPDDoc.AcquirePage(0)
For k = 1 To numPages
lAnnotscnt = objAcroPDPage.GetNumAnnots()
For m = 0 To lAnnotscnt - 1
If lAnnotscnt = 0 Then Exit For
Set objAcroPDAnnot = objAcroPDPage.GetAnnot(m)
If (objAcroPDAnnot.GetContents <> "" And objAcroPDAnnot.GetSubtype = "Text") Then
Cells(iRow, 5).Value = k
Cells(iRow, 2).Value = objAcroPDAnnot.GetContents()
Cells(iRow, 11).Value = objAcroPDAnnot.GetTitle()
iRow = iRow + 1
End If
Next m
Set objAcroPDPage = objAcroPDDoc.AcquirePage(k)
Next k
lRet = objAcroAVDoc.Close(1)
Set objAcroAVDoc = Nothing
Set objAcroPDAnnot = Nothing
Set objAcroPDPage = Nothing
Set objAcroPDDoc = Nothing
End SubMake sure you are current with 9.x patches, just on general principles.
The code seems fine – nothing jumping out at me.
You can also look at using the JSObject methods and trying this via the JavaScript stuff – that will give you more access to the Annotation information…
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 24 Nov 2011 04:25:12 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Problem with controlling Annotations from Excel VBA
Problem with controlling Annotations from Excel VBA
created by apreeti<http://forums.adobe.com/people/apreeti> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4044740#4044740 -
Problem with trasferring music from itunes to Iphone 3Gs.
Hi
I have a problem with trasferring music from Itunes to Iphone and that is,
as soon as I finish transferring music to my Iphone, Itunes suddenly stops at the stage of where it says (at the top-centre of the screen), 'Sync Min's Iphone'.
Due to this reason, I've restored my Iphone a couple of times and reinstalled itunes but same problem occurs whenever I try to transfer music.
It appears music are successfully transfered since I could play the music on my Iphone but I wanna fix the problem since it's pretty annoying.
is there anything I can do about it?
Thanks
Message was edited by: Minsik ParkMake sure you have the latest version of iTunes (8.2.1?). If so, I'd reinstall iTunes, if the phone is otherwise working fine.
Phil
Maybe you are looking for
-
Is materialized view available in Oracle SE ?
Hi all, I have questions on materizlalized view : 1) Is materialized view available in Oracle Standard Edition ? 2) what is the meaning of "Materialized View Query Rewrite " ? Thank you very much, xtanto
-
Error in Previewing _OWL_ view
Hi Export, I did a lot of change on my Business Object, and suddenly I had this error when I want to preview _OWL_ and got the following error. I searched a lot and did not get an answer. Also I tried to rollback all my work but it did not work. Cou
-
Unable to edit MailBox folder & Rules of other users with PowerShell
Hello, I'm trying to modify the rules of my users inbox folders and rules but I'm not able to do that even though I'm assigned the rights which were supposed to be enough. The account I'm running this command is a domain admin and pretty much has all
-
I have consolidated my music contents into 1 directory, but the iTunes music library file is still in the old location. Does anyone know how i can get iTunes to move that one too?
-
Merging Old Archived Mailboxes With Current Mail
I have an old Mail archive from Panther I'd like to merge with Snow Leopard Mail now that the application seems much faster and stable and I have much larger hard disk. Some of the old mailboxes are identical to the current ones. Is it possible to si