How to create arrays

Hello,
I am quite new to Diadem and have some issues creating arrays. I am about setting up a pressure controle. Using starting pressure I determine a voltage between 0..10V to get this pressure. For instants: 50 bar correspond to a voltage of ca. 1.429 V. Due to the pressure I get a deformation of a piece, which needs to be linear, so I have to controle the pressure using the voltage. If the deformation runs to fast I obviously need to decrease the pressure, though the voltage. I used a formule Ds1+R1 wher Ds1 is the starting voltage and R1 the voltage which results from the difference of the real deformation and the wished deformation. For instance, the first step is the starting pressure plus lets say 0,5 V which gives 1,929V. This value I need to save to get the next pressure after. The way I chose always uses the starting pressure plus the voltage difference, which is wrong, so I thought to create arrays but I do not know how. Does anyone have clue? Hope to have explained the problem properly, otherwise just ask. I am using Diadem 8.0
Thx
d

Hi dirkounet,
Just to clarify, are you in fact asking for help in doing the above with a DIAdem-DAC block diagram? Or are you perhaps asking about processing the data resulting from such an experiment? The answers to these two questions are quite different, and I can unfortunately only help you with the latter, though others can help you with the former.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

How to create array of obects in Java

Hi friends,
I am new to java i don't know how to create a array of objects of a class Can you help me Thanks in advance pls mail me [email protected]

Arrays can contain primitive values such as int's, and objects, such as Strings and classes that you define. Hope the following tutorial page helps:
http://java.sun.com/docs/books/tutorial/java/nutsandbolts/arrays.html

How to create array of indicators, with the indicators numeric text value changes as it falls above or below the limit

Hi,
I am a newbie here. Just started using Labview for my project. Currently having some difficulties over here. Hopefully someone could enlighten me. I wanted to create an array of 60 indicators, where the indicators value are measured from the PCI card. But now the problem is how to make my indicator values in the array change its numeric text color if it falls below or above the limit set. I've attached the vi together with this. Thanks.
Regards,
CH.Ong
Attachments:
testing.vi ‏15 KB
try.vi ‏120 KB

Maybe, you can try something like this...
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
To change Boolean Text Color in Array of Clusters.vi ‏18 KB

How to create array with "n" elements...

Hy, how can i create a array with "n" elements ?

i know, but the thing is: the other methode (which
one isn't developed fom me) needs an Object Array
(Object []) to work correctly...then take a look into the method toArray() of the Collection interface.
thats why i need this gay "object Array"....I think it would be wise to avoid that adjective in this context and meaning.

How to create array for activex control

Now I am using microsoft form 2.0 combo box activex control in LabVIEW. My problem is I cannot create control array for the combobox like in visual basic. In visual basic, if we want to create control array for combo box or else, we just copy and paste onto the same form.
For example if I copy combo1 and paste it onto the same form it will become 2 combo box i.e combo1(0) and combo1(1). So,how can I make same like that in labview using that activex?

I'm sorry,I do not really understand. I've tried what have you told me by using automation refnum, but it is not working.
I attached the file. if, let say , I want to make this three combobox red back colour simultanously, how to do it?
Attachments:
combo_box_activex.vi ‏28 KB

How to create Array type parameter of Oracle 10.2.0.1.0 in java

I create a collection type with:
CREATE OR REPLACE
type TEST_User.T_ARRAY AS TABLE OF VARCHAR2(100);
and in java code, I use following code to create a parameter of this type, and set it for a procdure
String[] userMakeArray = new String[]{"V", "N", "A"};
oracle.sql.ArrayDescriptor descriptor = oracle.sql.ArrayDescriptor.createDescriptor("TEST_User.T_ARRAY", cn); // cn is connection instance to database
oracle.sql.ARRAY array = new oracle.sql.ARRAY(descriptor, cn, userMakeArray);
((oracle.jdbc.OracleCallableStatement)call).setArray(8, array);
when i use this to call procedure in Oracle 10.1, it work well.
In Oracle 10.2, it does not work well.
For test, I can execute procedure well in sql plus, but in java client, I found that array contains three items "Null", while array is correct when conect to 10.1 enviroment.
does anybody know what's the reason for this.
thanks a lot.

Hi,
Too long to copy/paste here but i have a simpler working example of Nested Table of VARCHAR2 type against 10.2.0.x, in chapter 3 and 8 of my book:
create or replace type NTab_Vc2 as TABLE of varchar2(30)
create table NSTableTab (id int, numnt NTab_Num, vc2nt NTab_Vc2, datnt
NTab_Dat)
nested table numnt store as NSTabNum,
nested table vc2nt store as NSTabVc2,
nested table datnt store as NSTabDat;
insert into NSTableTab values (1,
NTab_Num(1, 2, 3, 4, 5, 6, 7, 8, 9, 10),
NTab_Vc2 ('One', 'Two', 'Three', 'Four', 'Five', 'Six', 'Seven', 'Eight', 'Nine', 'Ten'),NTab_Dat('01-JAN-2003', '02-JAN-2003', '03-JAN-2003', '04-JAN-2003',
'05-JAN-2003', '06-JAN-2003', '07-JAN-2003', '08-JAN-2003',
'09-JAN-2003', '10-JAN-2003')
// The following code snippet retrieves and returns a
// NTab_Vc2 as a java.sql.Array
OraclePreparedStatement ps = (OraclePreparedStatement)
conn.prepareStatement ("SELECT VC2NT FROM NSTableTab
WHERE ID = ?");
ps.setNUMBER (1, id[0]);
OracleResultSet rs = (OracleResultSet) ps.executeQuery();
Array a = null;
while (rs.next())
a = (Array) rs.getObject(1);
ps.close();
return a;
Kuassi, http://db360.blogspot.com/2006/08/oracle-database-programming-using-java_01.html

How to create array of push button 288 ch in the PXI 6509 (3pcs)

Hi all,
Need help..
I'm beginner in labview. & its first time use NI to my project.
We need push buttom approx 288 ch as panel control. we use PXI 6509 (3 pcs)
& I have make a code (in the attach).
but some time appear like a bug if we push one button after push all button. but some time is ok.
Please correct the code.
Many thanks..
Solved!
Go to Solution.

It seems to work okay for me. What do you mean by "sometimes appear like a bug"? How is it not behaving like you want.
Some recommendations:
1. There is no logical reason for the feedback node on some of your error wires.
2. You might want to turn some of your groups of buttons into a cluster. That way you can work on the value change of a cluster and not have to set up 100's of value changes for the individual controls. You would also be abe to easily use cluster to array to turn your cluster of booleans into array of booleans rather than building arrays by manually wiring up 100's of controls.

How to create Array list dynamically ???

Hi
when new session starts,dynamically it has to create arraylist.
How to do this???
Help regrading this,plzzzzz...
Cheers,
ap1_2

I am not sure in which context you are asking this question
if (session == null) {
//create session here
ArrayList sessionList = new ArrayList() ;
}The above code snippet is merely a pseudo code.

[SOLVED] How to create array in bash from some lines in config file

I have config file for small script and it looks like this:
local_directory="$HOME/etc"
excluded_directory="$HOME/etc1"
excluded_directory2="$HOME/etc2"
excluded_directory3="$HOME/etc3"
I would like to place all "excluded_directoryXX" config options into array that can be parsed to program. This way i have to hardcode it and it is not practical at all.
Can somebody help me out?
Last edited by kuraku (2013-09-24 20:45:42)

@jasonwryan
Thank you, i was not aware of that builtin. At first i wanted to use this in combination with "grep --after-context=XX" and then i realized that i can use it this way:
mapfile -s XX -t configs </etc; echo "${configs[@]}"
Thank you very much.

How do you create array of enums for transitions in a state machine?

Hello,
I am trying to build a state machine, but, I am struggling with understanding the methods for determining which state to transition to next. In other words, I have several states, but, I don't want to go in any particular sequence. If I have states numbered 1 through 10, I want to be able to go 1-4-2-5-6-2-6-1-10 etc. in no particular order. I want the transition to the next state (and actions) to be determined by the streaming data, which can be random and require access to any of my 10 states at any time and in any sequence.
I saw this picture on the "Application Design Patterns: State Machines" white paper, but, it leaves out some important details. How does one create the structure in BLUE shown in 3C? When I try to create this array of enums, all of them are the same. I am not able to make a list of different enum values. In other words, when I type in "2", then, all the values in the array display as "2."
There is a nice, simple video example of a state machine for dispensing soda for $0.15, however, this state machine moves in a single sequence, from 5 cents, to 10 cents to dispense; it does NOT illustrate how to select a state "out of order." I need to understand how a state machine can move from "5 cents" state to dispense directly, with the addition of 10 cents to the "5 cents" state.
Can anyone suggest a really good tutorial on how to make the selector work in a state machine? I have been reading some of the available material on ni.com, but, I can't find a good detailed explanation of how to do it. I remain confused.
Or, can you just explain how they created the BLUE array in the attached picture? Maybe I can figure it out from there.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
next state.jpg ‏75 KB

Hi Kathryn,
Yes, this is EXACTLY what I want to accomplish...
So it would basically run:
State 1
Read input
Determine next state (say 3)
State 3
Read input
Determine next state
State
Read input
Determine next state
And so on...
But, I am quite new to programming Labview state machines, and can't figure out how to even start when the sequence of states is random instead of fixed!!! I can do 1,2,3,4, like the vending machine VI example, but, not 1,3,2,2,2,5,2,1 etc. based on external input. Is there some simple example case I can study? I can't believe I am inventing this for the first time.
"select the state to run"
But, HOW do I do this??????? This is exactly the question I am asking...how is this done? Please see the attached 3-state system....how do I hook this up???? I am totally lost here...can you help me understand how to wire this thing?? In this simpe RED/GREEN/BLUE case, my input is just the number a user would input on the front panel.... Apparently, there are two files necessary... a vi and .ctl??? What is .ctl?
Thanks,
Dave
Attachments:
forum nov 12 red green blue.vi ‏7 KB
forum nov 12 red green blue.ctl ‏5 KB

How to create and use mutable array of UInt8

Hello!
If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
Then how to create and use mutable array of UInt8 pointers?
The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

I try
- (void) scheduleRequest:(UInt8 *)request {
if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
[scheduledRequests addObject:request];
But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

How to Create a datatype for a storeprocedure which has got array ?

Hi All,
Please tell me how to create a datatype for a storeprocedure which has got an array structure ?
Thanks,
Sindhu.

Hi Sindhu.
You would have to use a JDBC Cursor for this but it's possible only Output parameters, not Input parameters.
It's describle in a help link:
Defining an EXECUTE Statement http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7b72b2fde93673e10000000a114a6b/frameset.htm
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output), CLOB (input and output), CURSOR (output; only in connection with the Oracle JDBC driver)
I think you can execute your StoreProcedure many times depends of array occurs.
Regards.
Bruno.

How to create a chart with x and y input arrays

I am trying to create a chart that receives chunks of data from a while loop. I know how to create a chart in order to append new data points to those points already in the display, but a regular chart doesn't let me specify the x axis data points. Is there a way to create a chart with x and y array inputs?
Thanx,
Tom

It's called an XY Graph. If you need an XY graph to behave like a chart, look at the shipping example called XY Chart.

How to create an array using reflection.

How to create an array using reflection.
I want to achive something like this,Object o;
o = (Object)(new TestClass[10]);but by use of reflection.
To create a single object is simple:Object o;
o = Class.forName("TestClass").newInstance();But how do I create an array of objects, when the class of objects is known only by name? (Can't use Object[] because even though an Object[] array can be filled with "TestClass" elements only, it Cannot be casted to a TestClass[] array)
Anybody knows?":-)
Ragnvald Barth
Software enigneer

Found it!
the java.lang.reflect.Array class solves it!
Yes !!!

How to create an array of linklists??? ... plz

Hi guys,
I am trying to create a Hash table. My link list is already working. But i am still confused about how to create any array linklist for solving the collisions. Do i need to create a new instance of the linklist for each array slot? What is the better way to do?
just need some hint to start it.
abdul

Yes, you need to create a new instace for each slot.
LinkedList[] ht = new LinkedList[size];
for(int x = 0; x < size; x++)
ht[x] = new LinkedList();

How to create arrays

Similar Messages

Maybe you are looking for