How to create automatically users&roles in CUA and in chlid systems?

Hi,
i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
are there any standard BAPI or Funcion modules that can do this job?
is the role created automatically in CUA can be seen automaticall in the portal child system?
any help?
Thanks&Best regards

You can use one of the various ways Java EE provides you, e.g. container managed authentication.
It's also all in the Java EE tutorial: [http://java.sun.com/javaee/5/docs/tutorial/doc/bncas.html].
You can configure it in the application server as well: [http://tomcat.apache.org/tomcat-6.0-doc/realm-howto.html].
Here is an example how to use it in JSF: [http://ocpsoft.com/java/acegi-spring-security-jsf-login-page/].

Similar Messages

How to create automatically users&roles in CUA and child systems

Hi,
i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
are there any standard BAPI or Funcion modules that can do this job?
is the role created automatically in CUA can be seen automaticall in the portal child system?
any help?
Thanks&Best regards

Thank you all. I got the solution.
Regards
Rajesh

How to create/get user & role in Weblogic 9.2 programmatically?

Hi,
I am new to Weblogic 9.
I need to create a web service to manage user/role in WebLogic 9.
Searching thru the web and found some classes like:
AtnSecurityMgmtHelper, AtnProviderDescription etc
Are those the correct classes to create/retrieve user & role?
If so, what jar file contains those classes and where is the jar
file?
Thanks in advance,
Terry

You can do it with WLST help
http://e-docs.bea.com/wls/docs92/config_scripting/config_WLS.html#wp1019913
or via JMX through http://e-docs.bea.com/wls/docs92/javadocs/weblogic/management/security/authentication/UserEditorMBean.html and such

How to create Custom User Role in HelpDesk?

Unfortunately, it is not possible to create a custom user role with custom permissions. What you see is what you get!
When you say, 'access to the Spiceworks server', do you mean Remote Desktop? Or accessing Spiceworks application from another computer?

Hi,
Could anyone help me to create my custom User Role or edit the existing Role in HelpDesk system? Please help me for this problem.
One more, How could my Helpdesk Admin/Tech user access to the Spiceworks's server. I mean, could he access through web browser or need to install it on client's PC?
Stay tune,
This topic first appeared in the Spiceworks Community

How to create a ARD for 64 Bit And 32 Bit Systems

Dear All,
Please help me to solve my problem. I am not able to create the ARD for both type systems (32 Bit and 64 Bit Bit). My system is OS Windows 7, 32 bit operating system. Sometimes my add-ons run successfully for 32 bit , sometimes for 64 bit. I am creating 2 ARD's for each add-on but I have failed.
I have read many threads but I got no success.
Please help me.
Regards

Hi Pedro Magueija, Edy Simon,
Thanks for your reply. I follow below mentioned steps to create the ARD File. I build my add-on code as mentioned below:
Solution Configuration
Solution Platform
Project Properties/Compile/ Advanced Compile Option/ Target CPU
Add-on Registration Data Generator x64 Option
Debug
x86
x86
FALSE (Unchecked)
Debug
x86
x86
True (Checked)
I was able to create and use ARD by doing in above mentioned way. But sometimes these ARD doesn't work or doesn't get installled.
Regards

How to create new user and How can i assign end user roles

Hi,
I am new to SAP, please explain how to create end users and their roles
Thanks
ravi

Hi,
Roles are decided by IT managers. Suppose if Persons who are working in shopfloor or production side
give authorization to Production order create , change and Confirm like that etc
1. In role maintenance (transaction PFCG), choose the Authorizations tab page.
2. To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation. Otherwise, a dialog box appears in expert mode (see Regenerating an Authorization Profile After Changes).
Please take telp from Basis person also refer this link,
http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
Thanks

How to create many user in the same database

hi
my question is "How to create many user in the same database(application)?"
for example, i have students, teachers, and staffs user using my application.
i can create many users to use the same application right?, how ^^''' ???
(right now i can only create application and then it shows every data in my DB
but i want it to show only the data for the user who login to that application)
Thanks.
ps. i'm newbie, please help T^T

You need to create a user table within your application that maintains their privileges. If you have LDAP you could use this for authorisation otherwise the table would handle that as well (store passwords etc). Your reports etc would then be filtered on information from this table.
Check out some of the sample applications to see how authorisation and access is implemented (Online store is one). The how-to on the issue tracking system should also have some useful pointers.
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/issue_track.htm#BABBGBJG
cheers,
Ron

How to create a user in UME Database using web dynpro java custom application

Hi,
Can you please suggest me how to create a user in UME Database using web dynpro java custom application.
My Requirement is user can register his/her user id in SAP Portal 7.3 UME database.
Please suggest me.
Thanks and Regards,
Amit

Hi Amit,
Generated Documentation (Untitled)
This is what you're looking for, there's no real cook-book -- though Amey mentioned there might be some material on SDN, perhaps some tutorials.
You should be looking into com.sap.security.api.IUserFactory, methods newUser(String) which gives you and IUserMaint and commitUser(IUserMaint, IUserAccount) -- IUserAccount can be obtained using com.sap.security.api.IUserAccountFactory, method newUserAccount(String)
Hope it helps,
D.

How to create the user on Internet Application Server(IAS) control console

Hi All,
My Client is asking me for How to create the user on Internet Application Server(IAS) control console 10.1.2( 10g release 2).
If anyone have the document for How to Create the User on Internet Application Server (IAS) console 10g release 2 , then please send me the document and help me out from this Concern.
Regards,
Yadav@intelli.
Edited by: 851080 on Apr 8, 2011 6:31 PM

Are you using OID? Can you provide more details about your iAS environment?

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

How to create a user in oracle.

how to create a user in oracle level.i know how to create from front end.can any body suggest.how to create oracle user from backend.
Thanks,
Dave

Hi,
We can use the 'hr_user_acct_internal.create_fnd_user' API to create the users. The sample code is as follows:
BEGIN
apps.hr_user_acct_internal.create_fnd_user
(p_user_name => 'XXX',
p_password => 'XXX',
p_employee_id => 1234(This is the person id from per_all_people_f),
p_user_id => x_user_id,
p_user_start_date => SYSDATE,
p_email_address => 'XXX',
p_description => 'XXX',
p_password_date => NULL
COMMIT;
END;
and to add the responsibility to the user, we can use the following code.
BEGIN
fnd_user_pkg.addresp
(username => 'XXX',
resp_app => user_res_rec.application_short_name,
resp_key => user_res_rec.responsibility_key,
security_group => 'STANDARD',
description => 'DESCRIPTION',
start_date => SYSDATE,
end_date => NULL
END
Best Regards
Arun Kumar S.R
Apps Associates

How to create a user for a database

hi all,
in the default ORCL database (oracle 10g) how can i create a new user. i did the below steps.
1. connecting as sysdba and creating a user
2. create user kumar identified by kumar;
3. create connect,resource to kumar.
but after this when i tried to connect the ORCl database with user 'kumar' it is giving me the ora-01017 error.
please help me how to create a user to a db using sqlplus.
Thanks,
Kumar.

Kumar_9985 wrote:
hi all,
im looking into wrong database. in my system along with orcl another db 'practice' is there. as both are having same ports(1521) and this 'practice' is default database when i connected as 'conn / as sysdba'. instead of this i should have been done as 'conn sys/sysdba@orcl as sysdba'.
sorry for posting this as issue.Has nothing to do with port 1521. That is not used by the database, it is used by the listener. And if you are configured properly (actually, if you are configured by default), the same listener listens on port 1521 for connection requests to all databases on the server.
If you were connecting to the wrong database with 'conn / as sysdba' it's because you had the wrong environment value for ORACLE_SID. In fact, with that connection request, you weren't useing the listener at all. When you added "@orcl", the connection request looked up "orcl" in the tnsnames file, and asked the OS network stack to pass the request on to whatever was using PORT= at HOST=. And that should have been (and obviously was) the listener.

HOW TO CREATE A USER-EXIT FOR MB31 GOODS RECEIPT

Hy,
<b>HOW TO CREATE A USER-EXIT FOR MB31</b>
TO COMPARE ORDER QTY CONFIRMED AND GOODS RECEIPT QTY
( IF GR QTY GREATER THAN CONFIRMED QTY ERROR MESSAGE SHOULD COME AND NOT ALLOW TRANSCATION TO PROCEED).
POINTS CONFIRMED.
REGARDS,
KARTIKEY.

Hi Rawat,
   You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name     Description
MBCF0002     Customer function exit: Segment text in material doc. item
MBCF0005     Material document item for goods receipt/issue slip
MBCF0006     Customer function for WBS element
MBCF0007     Customer function exit: Updating a reservation
MBCF0009     Filling the storage location field
MBCF0010     Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011     Read from RESB and RKPF for print list in MB26
MB_CF001     Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert

How to create automatic creation of BP from customer and vendor master data

Hi gurus,
can any one tell how to create automatic creation of BP from customer and vendor master data.
Please give me the steps.
Thanks
Sasikanth.

HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini

How to create an user input variable for customer exit variable? - BW3.5

Hi Guru,
I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable:
1. Month: Current reporting month
2. Fiscal Year to Date
3. Project Year to Date
Here I need 2 variable to do these, 1 customer exit and 1 user input variable. I have created a variable customer exit to calculate all these requirement. But can any1 tell on how to create the user input variable for my customer exit? I need a user input variable with drop down list like below.
01-Current month
02- Fiscal Year to Date
03-Project Year to Date
I have create a new master data for this variable, but it's not working. What I need now is a standalone master data which do not need to link to any exiting records. Can any1 tell me how to create this?

Just go to the definition of the variable for which you have created a customer exit. There you will find a check box for "Ready for Input". Just tick that checkbox and the variable will be available as a selection variable in the reports selection screen.
Regards,
Yogesh

How to create automatically users&roles in CUA and in chlid systems?

Similar Messages

Maybe you are looking for